Audeara A01 Bluetooth Active Noise Cancelling Headphone User Manual BNC40

Audeara Pty. Ltd Bluetooth Active Noise Cancelling Headphone BNC40

User Manual

A-01
Instruction Manual
Bluetooth Active Noise Cancelling Headphone
The user manual explains the features and functions of your A-01 to help ensure an
optimal user experience.
Product Specifications:
Bluetooth version: 4.1
Bluetooth chipset: CSR8675 w/apt-X
Noise cancellation rate: 85%
Speakers: 40mm Neodymium
Audio impedance: 32Ohm
Charging time: about 3.0 hours
Charging: Micro USB
BT operating range: ≥10 m
Connection: 3.5mm jack
Battery time (Bluetooth only): 15 hours
Battery time (Noise cancelling only): 30 hours
Battery time (Bluetooth + noise cancelling): 12 hours
Battery Type: Li-Polymer
Package Contents:
1. Headphone
2. Detachable Aux Cable
3. 1/4 inch Stereo-plug Adapter
4. Dual-plug Adapter (For Airline)
5. USB Charging Cable
6. Small Mesh Bag
7. Hard Shell Case
8. User Manual
9. Gift box
Headphone Overview
Left Side
1 USB Socket (For Charging)
2 Volume / Previous Song (Only for Bluetooth)
3 Multifunction Button (MFB) / Switch ON/OFF, Pairing, Make/Answer/End/Reject Call
4 Volume + / Next song (Only for Bluetooth)
5 Microphone
6 3.5mm Audio Jack
7 Bluetooth LED Indicator
Right Side
8 Volume + / Knob (For Bluetooth, Noise Cancelling or Wired)
9 Noise cancelling ON/OFF Button
10 Noise Cancelling LED Indicator
Adjusting the Headband:
• In order to achieve maximum comfort and noise cancellation, the headband should be
adjusted to properly fit your head with the ear cups sitting comfortably over your ears.
Charging the Headphones:
Prior to use, charge your A-01 headphone unit by connecting the included charging cable
into a USB power outlet (such as USB chargers or computer USB ports) and plug the
other end into the headphone’s micro USB charging port. The LED indicator will light up
red showing that the unit is being charged. When charging is complete, the red LED
indicator will turn off.
Active Noise Cancelling Mode:
Adjust the volume on the headphones.
To power ON the noise cancelling function, set the ON/OFF
switch to ON. The Noise Cancelling LED indicator will light up in blue.
Note: After you turn ON the power, you might hear a slight hissing noise. This is a normal
function and will cease after a few seconds.
When the batteries are running low, the Noise Cancelling LED indicator will become dim.
• Once the battery is fully drained, the active noise cancelling feature will turn off but the
audio signal from the music player will continue to transmit.
• In quiet environments where noise cancellation is not required, the A-01 can also be
used like conventional headphones, without the use of batteries.
When not in use, switch OFF the POWER to extend battery life.
Bluetooth Function
Main Functions
Turning ON/OFF:
1. Power ON your headphones:
Press and hold the Multifunction Button (MFB) for about 4 seconds until the Bluetooth
LED indicator light starts flashing green/red rapidly with an ascending sound.
2. Power OFF your headphones: Press and hold the MFB for about 5 - 6 seconds until the
Bluetooth LED indicator light turns solid red with a descending sound.
Getting Started with your A-01:
To use your Stereo Bluetooth Headphone, please follow the steps below:
a) Ensure your Bluetooth Headphone is fully charged.
b) Pair your charged Bluetooth Headphone with a Bluetooth-enabled mobile phone prior
to first use. Please fully charge your new headphone before first use.
Pairing your Headphone:
The headphone works with Bluetooth-enabled phones. Prior to using and pairing your
headphone for the first time, please check to make sure your mobile phone is
Bluetooth-enabled.
The pairing instructions for typical Bluetooth-enabled mobile phones are explained in
“Pairing Your Headphone.” The headphone pairing procedure may vary depending on the
settings of your mobile phone. Please contact the manufacturer of your mobile phone or
its agent for further information.
1. Press and hold the MFB for about 4 seconds until the Bluetooth LED indicator flashes
and alternates between green and red. The A-01 will now enter into pairing mode.
2. Enable searching of nearby Bluetooth devices using the Bluetooth menu on your
device.
3. Once the “A-01” is found, you can now connect and pair. If your device prompts you for
a password, please use “0000” - For more details, please refer to your device’s owner
manual.
4. When pairing is successful, the Bluetooth LED indicator will flash green every 4
seconds. If pairing is unsuccessful, please turn off the A-01 headphones and repeat the
pairing steps.
After initial pairing is established, the headphones will automatically reconnect to the last
paired device upon turning ON.
Call-related Functions:
Answer a call
Press MFB once to answer
End a call
Press MFB again to end
Ignore a call
Hold MFB for 3 seconds
Last number re-dialing from
headphone
Press MFB twice in standby
status
Swap calls
Press MFB for 3 seconds while speaking
Music-related Functions:
Play/Pause Music
Press down the MFB Button
once to start playing music and
press it again to pause your music
Next/Previous Song
Press down the Music/Volume
Control button towards the Forward
icon to play the next song. To
play the previous song, slide and
release the Music/Volume Control
button towards the backward icon
* May not be available for some devices. See your user manual for specific
functionality/features available.
Voice Dialing from your Headphone:
If your mobile phone is equipped with a voice dialing function, press and hold the MFB
button and say the voice tag according to the phone’s command functions. You must
record the voice tag (the person’s name) into your mobile phone prior to using the voice
dialing function on the headphone. Please refer to your mobile phone’s user guide.
Using the 3.5mm Audio Cable:
3.5mm audio cable is included for use with multimedia devices that do not have Bluetooth
capabilities. You may also use the audio cable if the A-01 is not charged properly.
Note:
You are able to use both Noise Cancelling & Bluetooth Function simultaneously.
You may notice 2 types of volume controls on the A-01 headphones. The A-01
headphone is a multifunction headphone unit. It can be used as a regular wired, active
noise cancelling, or BT headphone. The right side volume wheel (Volume A) works for all
functions - the left side volume buttons (Volume B) only work for BT headphone
functionality. (See Headphone Overview)
*Adjusting the Volume B
When you are on the phone or listen to the music, push the volume button (8) or long pre
ss the button (2) (4) repeatedly until you reach the desired volume level.
Troubleshooting:
If you are unable to connect your headphone and your mobile phone, please try the
following:
• Ensure your headphone is turned OFF and properly charged.
• Ensure the headphone is properly paired with your mobile phone.
• Ensure the headphone is within a 10 meter range of your paired Bluetooth device and
that there are no obstructions, such as walls or other electronic devices in between.
• Ensure your mobile phone’s Bluetooth feature is activated. Please refer to your mobile
phone user guide for specific instructions.
To reset certain functions of the A-01 headphones you can simply plug-in to recharge
then disconnect.
Safety instructions:
Always turn down the volume control before plugging the headphones into a sound
source.
• Do not use these headphones where vehicular traffic is present, or in any other activity
where a failure to hear surrounding sounds could be dangerous.
• Maintenance and service operations are only to be carried out by authorized dealers.
Damage caused by manual modifications of the product is not subject to warranty.
• If this product is used for other purposes than originally intended, the product may suffer
damage and will void the warranty.
• Long-term exposure to loud music may cause hearing damage. It is best to avoid
extreme volume when using these headphones, especially for extended periods.
• Keep batteries out of reach of children.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

Navigation menu