Audio Partnership PLC MGV2-010 Bluetooth Speaker User Manual Manual

Audio Partnership PLC Bluetooth Speaker Manual

User Manual

1. Touch the area of your NFC device
against the logo on top of Go V2.
2. Go V2 will enter automatic pairing mode
and ‘Go V2’should appear on your device.
1. Press and hold the button to enter Bluetooth
pairing mode
2. Enable Bluetooth connectivity on your Bluetooth
device (eg. phone, tablet etc) and pair with the Go
V2 (you may need to consult your phone or tablet
operating instructions).
User’s Manual
To enjoy Bluetooth audio, you must first ensure
that the Go V2 is connected to mains power or its
battery is charged.
Then pair the Go V2 with your Bluetooth enabled
device.
1
3
Pairing a second device
Aux input
There is an Aux input on the rear of the unit that allows
any analogue device to be connected.
Connect the charging adaptor to the Go V2 and charge for 4
hours before first use.
The charging LED will indicate Orange whilst charging
and Green when fully charged.
Press and hold the power button on the top of the unit
for one second to turn it on.
1
2
Battery Safety
Auto power down
To save power, your Go V2 will automatically turn off after
30 minutes if no music is playing. Press the power button
to turn the Go V2 back on.
Low battery warning
A flashing Red LED indicates that the battery is too low
and the Go V2 will enter a standby mode where no music
can be played. This LED will continue flashing for 30
minutes after which the Go V2 will turn off.
USB Charging
The Go V2 can be used to charge compatible mobile
devices.If the charging adaptor is not connected this will
drain the battery.
Your Go V2 contains a high performance battery and charging
system that is designed to work in temperatures that do not
exceed 50°C (122°F). Leaving this product in an automobile
where temperatures may exceed this limit may result in
permanent battery damage, fire or explosion. Do not leave your
product in any location where temperatures may exceed this limit.
If the Go V2 is not used for a long time, please recharge the battery
every two months to maintain the battery in optimal condition.
Top tips
To talk to us, call +44 (0)20 3514 1521 (UK Local) or 1 8773578204 (USA)
Press the button to select the Bluetooth input.
Bluetooth set-up
Successful pairing will be signalled by a ‘beep’ from the
unit and the LED will turn solid blue.
Pairing Your Device Using NFC
Pairing Your Device Manually
Portable Bluetooth Speaker
Press the button to select the Aux input.
To pair a different device, press and hold the button to
enter pairing mode and pair your Bluetooth device as
described in the Bluetooth instructions.
2
OR
NFC

Navigation menu