Audio Technica BT03 WIRELESS BLUETOOTH HEADSET User Manual ATH BT03

Download:
Mirror Download [FCC.gov]
Document ID	1429179
Application ID	AWpedrzTBScFVO25tqXH7Q==
Document Description	Front OM
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	77.74kB (971689 bits)
Date Submitted	2011-03-10 00:00:00
Date Available	2011-03-10 00:00:00
Creation Date	2011-01-05 13:08:10
Producing Software	Adobe PDF library 7.77
Document Lastmod	2011-03-02 16:24:30
Document Title	ATH-BT03_表
Document Creator	Adobe Illustrator CS2

WIRELESS STEREO HEADSET
ATH-BT03
Verifying package contents
Before you start using the product, make sure that all the following articles have been
supplied. If any article is not supplied or is damaged, contact your Audio-Technica
dealer.
INSTRUCTIONS
• XS size x 2 pcs
• S size x 2 pcs
• M size x 2 pcs
• L size x 2 pcs
Thank you for purchasing this headset. Before using this headset, please read through
these operating instructions to ensure that you will use the headset correctly.
Information
Earpieces (ER-CKM55) This product is supplied with the
M size earpieces on the product.
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is
subject to the following conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that
may cause undesired operation of this device.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
Note
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Charging USB cable (1.0 m)
Note
ATH-BT03
Lithium polymer rechargeable battery is used for this headset. When disposing of this headset,
please comply with local regulations.
Headset parts
Pairing
■Headphones
Earpieces
Housing
L/R display
Use this procedure to pair devices beforehand to allow them to communicate with each
other.
devices should first be paired before connection. To hear the verifying
beep of pairing, put on the headphones before you start the pairing procedure.
※For information on how to put on the headphones, see “Listening to music” on page 7.
Bushing
1. Place the
Slider
Reset button
For details,
see page 13.
60 cm cord
Microphone
Call button
Press to make a call.
Operation button
Use to listen to music
or make a call.
LED (red)
LED (blue)
Micro USB
jack
Pairing
button
Clip
Turns this product on and off.
Doubles as a 3D BASS effect mode switch*.
* For details, see 3D BASS effect function on page 9.
Confirm the following before starting to use.
●The transmitting
device is on.
●This product and the transmitting device have been paired.
●The transmitting
device supports the music transmission function
(profile: A2DP*)
※For information on profiles, refer to “Supported
version and profiles” on page 2.
1. Put on your headphones as shown in the figure
on the right. Place the left headphone (marked L)
in your left ear and the right headphone (marked R)
in the right ear.
2. With this product in power off mode, press and hold
the POWER/EFFECT button for three seconds or
longer. The startup chime sounds and the blue LED
will blink three times as this product is turned on.
3. Refer to the instruction manual of the transmitting
device to connect the
device.
4. Start playback on the transmitting
device.
The blue LED blinks during
connection.
The left earpiece has
a protruding part.
2. With the product in power off mode, press and hold the Power/Effect button for three
seconds or longer. The blue LED will blink three times as the product is turned on.
3. Press and hold the Pairing button for three seconds or longer to activate the pairing
mode.
A beep sound will be heard to indicate that pairing has started.
The red and blue LEDs will blink alternately during pairing.
※Pairing may take a while.
4. Perform pairing on the other
device to find the product.
The screen of the other
device will display a list of found devices.
This product will appear as “ATH-BT03” on the screen.
Cap
Release the cap
from the claw.
device,
When the blue LED changes to slow blinking, pairing is complete.
device
If the transmitting
device supports operation control functions
profile: AVRCP), you can use the Operation button on this
product to control the transmitting
device*.
devices may not
＊Some transmitting
support this function.
Operation button
Operation function on
transmitting device
-Briefly press the center, the
of the Operation
button to play and pause
-Press and hold the
of the Operation button to
stop
-Briefly press the
of the Operation button to
forward tracks/and press and hold for fast forward
-Briefly press the
of the Operation button to
reverse tracks/and press and hold for fast backward
: Briefly press - Play/Pause
: Press and hold - Stop
: Briefly press - Forward / Press
and hold - Fast forward
: Briefly press - Reverse / Press
-and hold - Fast backward
Charging
This product uses the 2.4 GHz frequency band. Be sure to read and observe the
following instructions to prevent interference with other devices using this frequency
band.
The frequency band used by the product is also used by microwave ovens and other
industrial, scientific and medical instruments as well as short range wireless base stations
for identifying mobile devices (requires a license) on plant production lines, specified low
power base stations (does not require a license) and amateur radio stations (requires a
license).
1. Before using this product, make sure there are no short range wireless base stations for
identifying mobile devices, specified low power base stations or amateur radio stations
nearby.
2. In the unlikely event that use of this product causes serious interference with a short
range wireless base station for identifying mobile devices, stop transmitting radio waves
immediately. Then contact your Audio-Technica dealer regarding interferences
countermeasures (for example, installing partitions, etc.) to prevent interferences.
3. Also contact your Audio-Technica dealer regarding other problems involving serious
interference with a short range wireless base station for identifying mobile devices and
amateur radio stations or questions regarding such
interference.
● Available operating range
The product operates up to 10 meters from a transmitting
device, however
obstacles between the transmitting
device and the product or the structure of
the building you are in may reduce the operating distance.
● Interference with other devices
Microwave ovens, digital cordless phones, devices using wireless LAN,
devices
and other devices using the same 2.4 GHz frequency band may cause dropouts. Similarly,
since this product will also interfere with such devices, it is essential that devices that are
likely to interfere with each other are kept apart.
● Note that Audio-Technica accepts no liability whatsoever for leakage of data during
transmission.
version and profile
This product supports the following
■Communication system:
This product supports SCMS-T, a content protection method for
wireless
technology. It allows you to listen to music (or audio) from mobile phones, One-Seg
TVs and other devices that support SCMS-T.
Controlling a transmitting
devices within one meter of each other.
5. Select “ATH-BT03” displayed on the screen of the other
device.
※When you are prompted for a pass code on the screen of the other
enter 0000.
Power/Effect button
Supported
Listening to music
※Also read the instruction manuals supplied with the products that are to be connected.
External
view
■Control
devices
● The rechargeable battery may not operate long on the first charge and when it has been
recharged after a long period after not being used. After repeated charging and discharging,
it will become possible to adequately charge the battery.
● The rechargeable battery has reached the end of its service life when battery operating
time after charging shrinks to about half of what it first was. Contact your Audio-Technica
dealer to have the rechargeable battery replaced.
● Do not expose the battery to sudden temperature changes, direct sunlight, condensation,
sand, dust or electrical shocks. Never leave it in a parked car.
● The battery will not be properly charged if the product or the PC enters an energy saving
mode during charging. Check PC settings before connecting the product to a PC. The red
LED will go off automatically also when the PC enters an energy saving mode. Should this
happen, recharge the battery.
● Connect the product directly to the PC using the supplied USB cable. Do not use a USB
hub or USB extension cable to connect to a PC. Be sure to fully insert the plug of the USB
cable into the USB port.
version and profile.
Ver. 2.1 + EDR
■Compatible
Profiles:
• A2DP (Advanced Audio Distribution Profile): Sends and receives stereo quality audio data
• AVRCP (Audio Video Remote Control Profile): Play, stop, skip, volume control and other AV
device controls
• HSP (Headset Profile): Making calls, receiving incoming and making outgoing mobile phone
calls
• HFP (Hands-Free Profile): Making hands-free calls and receiving incoming and making
outgoing mobile phone calls with hands-free
This product is not charged when purchased.
You must charge the product before you can start using it.
1. Remove the cap from the product and connect the supplied USB charging cable to the
micro USB jack.
2. Correctly connect the USB charging cable to the USB port of a PC*1.
3. When charging starts the blue LED blinks and the red LED lights. After about three to four
hours of charging the red LED will go off indicating that charging is completed. *2
※ 1 If the USB cable is not properly connected, the red LED on the case blinks.
※ 2 This is the time it normally takes to charge an empty battery.
If power from the last charge remains, charging will end sooner.
※To connect to multiple profiles, the paring procedure in steps 4 and 5 will have to be
repeated several times.
※Some devices perform
connection automatically to load a compatible profile.
For details, refer to the instruction manual supplied with your mobile phone.
※If pairing is not completed within five minutes, the product will terminate pairing mode
and shut down. Should this happen, perform the pairing procedure again.
※The Reset button (--> page 13) cannot be used to delete pairing data.
■Operation during pairing
The red and blue LEDs will blink
alternately during pairing.
Connection diagram
PC
USB port
Micro USB
jack
Press and hold the Pairing button
for three seconds or more.
When charging starts,
the blue LED blinks and
the red LED lights.
To adjust the volume
Press the top and bottom of the Operation
button to adjust the sound volume.
Press the top (+) of the Operation button to
increase the sound volume and press the
bottom (-) to decrease it. Pressing and holding
the Operation button will also allow you to adjust
the volume*.
＊A warning beep is heard when maximum or
minimum sound volume is selected and the
sound cannot be set any higher or lower.
Sound volume adjustment
using Operation button
UP
DOWN
Press the top of the button to
increase sound volume and press
the bottom of the button to lower it.
5. Turn off this product when you are through listening.
Set the transmitting
device to disconnect
connection.
After use, press and hold the Power/Effect button for three seconds or longer to turn
this product off.
The ending chime is heard and this product is turned off.
Press and hold the Power/Effect
button for three seconds or longer.
Charging USB cable
When battery power is low
A warning sound is heard and the red LED and the blue LED both blink at 0.5 second intervals.
When the battery becomes completely depleted, an ending sound is heard and the power is
automatically turned off.
When the LED start blinking, charge the product according to the above instructions.
Operating time*
Continuous transmission (including music playback time): Max. 6 hours
Continuous standby time: Max. 200 hours
※ The above figures depend on operating conditions.
devices that have been paired may have to be paired again under the
following conditions
●When 9 or more
devices have been paired
(The product allows pairing for up to 8 devices. When you pair an additional device
after having paired the product with 8 devices, this pairing will overwrite the oldest
pairing data.)
● When the pairing data in the product has been deleted due to a repair, for example.
● When connection history data in the other
device has been deleted.
● The following conditions during charging may cause the red LED to go off before charging
completes.
・At temperatures outside the operating temperature range (5 to 45°C)
・The rechargeable battery is defective
If this happens, charge the battery again at the temperature range above. If the battery still
cannot be recharged, contact your Audio-Technica dealer.
Continued on overleaf

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Format                          : application/pdf
Title                           : ATH-BT03_表
Creator Tool                    : Adobe Illustrator CS2
Create Date                     : 2011:01:05 13:08:10+09:00
Modify Date                     : 2011:03:02 16:24:30-05:00
Metadata Date                   : 2011:03:02 16:24:30-05:00
Thumbnail Width                 : 256
Thumbnail Height                : 176
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 21355 bytes, use -b option to extract)
Document ID                     : uuid:B226D24C8118E0118398B21277A9272A
Instance ID                     : uuid:8d8b0055-de7f-4a67-8124-b5083e087b30
Derived From Instance ID        : uuid:B126D24C8118E0118398B21277A9272A
Derived From Document ID        : uuid:B026D24C8118E0118398B21277A9272A
Producer                        : Adobe PDF library 7.77
Page Count                      : 1
Container Version               : 9
Creator Version                 : 12
Creator                         : Adobe Illustrator(R) 12.0
For                             : tf, tf
Bounding Box                    : -37 -90 1872 1210

EXIF Metadata provided by EXIF.tools