Audio Technica R200 Communications Receiver User Manual users manual
Audio-Technica Corporation Communications Receiver users manual
users manual
AUDIO TECHNICA MODEL ATW1200 VHF WIRELESS SYSTEM USER INFORMAT ION . INTRODUCTION Thank you for purchasing the ATW-ZOO series wireless microphone system‘ It is our hope that the system will bring you years of trouble free pleasure and performance. Please follow the information contained in this manual closely as it will assist you in using your equipment effectively. PARTI. REGUIATORY REQUIREMENTS. FCC PART 15 COMPLIANCE STATEMENT CANADA RSS-210 COMPLIANCE STATEMENT “This device complies with Part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference” “This device complies with INDUSTRY CANADA R.S.S. 210, en confomite avec IC: RSS—ZlO/CNRZIO. Operation is subject to the following conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference which may cause undesired operation.” Please note that your ATM—200 system operates in a frequency band in a way, which may make its use subject to certain ECG and other regulatory agency restrictions and licensing requirements. For further information, Please contact your local office of the FCC as applicable. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFIMTIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. PART 2‘ USING THE ATW—TZOI BELT PACK TRANSMITTER The belt pack transmitter operates on one 9V batteries. Please make sure that your batteries are fresh. we recommend that you use Alkaline batteries and that you avoid using NiCad if possible. Remove the battery cover, insert the battery into the battery compartment. Connect your microphone or guitar cable to the connector on the topside of the transmitter. Turn the transmitter switch to the on position. Confirm that the receiver is receiving RF and the audio is passing through the receiver. You are now set to use the system. PART 3. USING THE A‘I’W-T202 HANDHELD TRANSMITTER The handheld transmitter operates on one 9V battery. Please make sure that your batteries are fresh. We recommend that you use Alkaline batteries and that you avoid using NiCad if possible. Remove the battery cover by unscrew and pull the cover until stop and insert the battery into the battery compartment and screw the battery compartment back into place. Turn the transmitter switch to the on position. Confirm that the receiver is receiving RF. Speak directory into the microphone and confirm audio is passing through the receiver You are now set to use the system. PARTA. USING THE AN-RZOO RECEIVER The ATW—RZOO receiver operates with AC adapter supplied. Connect AC adapter Dc output plug to receiver DC in jack and Ac cable to adapter AC plug. Plug the other end of AC cable into an AC outlet. Confirm that the LED comes on. Connect the unbalanced audio output to your mixer or PA system. Adjust the receiver and mixer of PA system volume setting to the desired level. Speak into the microphone and listen to the audio out at the speaker. If satisfied with the audio quality, you ca use the system.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2002:07:10 13:33:11-04:00 Create Date : 2002:07:10 13:32:57-04:00 Creator : Acrobat 4.05 Scan Plug-in for Windows Producer : Acrobat 4.05 Scan Plug-in for Windows Page Count : 2EXIF Metadata provided by EXIF.tools