Audio Technica T3202EE1 3000 SERIES HANDHELD TRANSMITTER User Manual
Audio-Technica Corporation 3000 SERIES HANDHELD TRANSMITTER
Contents
- 1. User Manual Warning Statement
- 2. User Manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3789781 |
| Application ID | T/CjAbOP+v7ymEOL82vTsg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 226.29kB (2828681 bits) |
| Date Submitted | 2018-03-21 00:00:00 |
| Date Available | 2018-03-21 00:00:00 |
| Creation Date | 2017-10-30 18:40:11 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2017-10-30 18:40:25 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 2015 (Macintosh) |
3000 Series User Manual UHF synthesized diversity wireless system ATW-R3210 UHF Synthesized diversity receiver ATW-T3201 UHF transmitter ATW-T3202 UHF transmitter Introduction Thank you for purchasing this Audio-Technica product. Before using the product, read through this user manual to ensure that you will use the product correctly. Please keep this manual for future reference. Package contents Before use, check to make sure that all of the following items are contained in the package. If any of the items is missing from your package or damaged, contact your local Audio-Technica dealer. • ATW-R3210 • ATW-T3201 • ATW-T3201 • AC adapter (for ATW-R3210) • Rack mount (large, small) • Screw kit for Rack mount • AT8456a microphone holder (for ATW-T3202) • AT8456a screws for microphone holder (for ATW-T3202) • Antennas • Quick Start Guide • Warranty Important information Warning: For customers in the USA FCC Notice Warning: • To prevent fire or shock hazard, do not expose this apparatus to rain or moisture. Caution: • Do not expose this apparatus to drips or splashes. • To avoid electric shock, do not open the cabinet. • Refer servicing to qualified personnel only. • Do not expose this apparatus to excessive heat such as sunshine, fire or the like. • Do not subject this apparatus to strong impact. • This apparatus should be located close enough to the AC outlet so that you can easily grasp the AC adapter at any time. • Do not place any objects filled with liquids, such as vases, on this apparatus. • To prevent fire, do not place any naked flame sources (such as lighted candles) on this apparatus. • Do not install this apparatus in a confined space such as a bookcase or similar unit. • Install this apparatus only in places with good ventilation. • The rating label is put on the bottom of this apparatus. This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Caution: You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Battery Caution: • Keep batteries out of the reach of children. • Observe correct polarity as marked. • Do not expose the battery to excessive heat such as sunshine, fire or the like. • Always consider the environment issues and follow local regulations when disposing of batteries. • Remove depleted battery immediately. • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • Use only disposable LR06(AA) alkaline batteries. • Do not use rechargeable batteries. • Do not use new batteries and old one at the same time. • Do not use different batteries type or model. • Do not use a leaking battery. If battery leakage occurs, avoid contact with skin. If contact occurs, immediately wash thoroughly with soap and water. • If contact occurs, immediately wash thoroughly with soap and water. • If battery leakage comes into contact with your eyes, immediately flush with water and seek medical. For customers in Canada IC statement CAN RSS-Gen/CNR-Gen This device complies with INDUSTRY CANADA R.S.S. 210. Operation is subject to the following conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference which may cause undesired operation. This device complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. Informations importantes Avertissement: Pour les clients aux États-Unis Avis de la FCC Avertissement: • Pour éviter tout risque de choc électrique ou d’incendie, n’exposez pas cet appareil à la pluie ou à l’humidité. Attention: Cet appareil est conforme à la Partie 15 du règlement de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d’interférence nocive et (2) cet appareil doit accepter les interférences reçues, y compris les interférences pouvant provoquer un fonctionnement indésirable. • Protégez cet appareil des projections et des gouttes d’eau. • Confiez tous travaux d’entretien à un technicien qualifié. • N’exposez pas cet équipement à des températures excessives, telles que celles de la lumière directe du soleil, d’une flamme ou autres sources de chaleur. • Ne soumettez pas cet équipement à de forts impacts. • Cet appareil doit être placé à proximité de la prise secteur afin que vous puissiez facilement vous saisir de l'adaptateur secteur à tout moment. • Ne placez pas d’objets remplis de liquide tels que des vases, sur l’appareil. • Pour éviter tout risque d’incendie, ne placez pas de flammes nues (telles que des bougies allumées) sur l’appareil. • N’installez pas cet appareil dans un espace confiné tel qu’une étagère ou un endroit similaire. • N'installez cet appareil que dans des endroits bien aérés. • La plaque signalétique se trouve sur le dessous de cet appareil. Attention: Vous êtes averti que tout changement ou modification non expressément approuvé dans ce manuel est susceptible d’annuler votre droit d’utilisation de cet appareil. Note: Cet appareil a fait l’objet de tests afin de vérifier sa conformité avec les limites relatives aux appareils numériques de classe B, conformément à la partie 15 du règlement de la FCC. Ces limites ont pour vocation d’offrir une protection raisonnable contre les interférences nocives en installation résidentielle. Cet appareil génère, utilise et peut émettre des fréquences radioélectriques et provoquer, en cas d’installation et d’utilisation non conformes aux instructions, des interférences préjudiciables à la réception des signaux radio. Toutefois, il n’y a pas de garantie que des interférences ne se produiront pas dans une installation particulière. Si l’appareil provoque des interférences préjudiciables à la réception radio ou télévisée, ce qui peut être déterminé en éteignant et allumant l’appareil, l’utilisateur est invité à essayer d’y remédier en prenant une ou plusieurs des mesures suivantes : - Réorienter ou déplacer l’antenne réceptrice. - Augmenter la séparation entre l’appareil et le récepteur. - Brancher l’appareil dans une prise, sur un circuit différent de celui auquel est raccordé le récepteur. - Demander de l’aide au revendeur ou à un technicien radio/TV qualifié. Mise en garde relative aux piles: • Tenez les piles hors de portée des enfants. • Respectez la polarité correcte indiquée. • N'exposez pas la pile à une chaleur excessive telle que les rayons du soleil, un feu ou autre source de chaleur. • Prenez toujours en considération l'impact environnemental et suivez les réglementations locales lors de la mise au rebut des piles. • Retirez immédiatement toute pile déchargée. • Danger d'explosion en cas de positionnement incorrect de la pile. Remplacez uniquement avec des piles de type identique ou équivalent. • Utilisez uniquement des piles alcalines LR06 (AA) jetables. • N'utilisez pas des piles rechargeables. • Ne mélangez pas des piles neuves et des piles usagées. • Ne mélangez pas différents types ou modèles de piles. • N'utilisez pas une pile qui fuit. En cas de fuite de la pile, évitez tout contact avec la peau. • En cas de contact, rincez aussitôt abondamment au savon et à l'eau. • Si le liquide de la pile entre en contact avec vos yeux, lavez aussitôt avec de l'eau et consultez un médecin. À l’attention des clients au Canada Déclaration IC CAN RSS-Gen/CNR-Gen Cet appareil est conforme à la norme R.S.S. 210 d'INDUSTRIE CANADA. Le fonctionnement est soumis aux conditions suivantes : (1) Cet appareil ne doit pas causer d'interférences dommageables et (2) cet appareil doit accepter toutes les interférences reçues, y compris les interférences susceptibles de générer un fonctionnement préjudiciable. Cet appareil est conforme aux limites de RSS-102 sur l'exposition aux rayonnements établies pour un environnement non contrôlé. Safety precautions • When using the product, also read the user manuals supplied with the devices that are to be connected. • When not using the product, remove the power plug from the power outlet. • Turn the product off before connecting or disconnecting cables. • If you use the product near a TV or radio antenna, noise may be generated in the TV or radio. In this case, move the product away from the TV or radio antenna. • Two transmitters on the same frequency cannot be used simultaneously. • Please be aware that interference may be generated from the surrounding electromagnetic environment and/or from using multiple units. • The wireless system may be affected by electromagnetic noise from automobile spark plugs, light dimmers, computers, OA devices, or electrical music instruments. Position the components of the system in a place where it is less likely to be affected. • Only use this product in combination with devices specified by the manufacturer. • Insert the plugs of connecting cables securely into their mating connectors. • Radio waves in the UHF band propagate mainly by line of sight. Configure system so there are no obstructions between the transmitter and receiver. • Turn the phantom power off when connecting to the mixer. • Use 120 V AC power source. Refer to "Specifications" for product ratings. • If there is an electronic device or a transmitter (mobile phone etc.) in the vicinity of this product, this product may be subject to noise. In this case, move the product away from the devices. • When installing this product, make sure there are no obstacles between the receiver and the transmitter that block radio waves. • If you use the product near a TV or radio antenna, noise may be generated in the TV or radio. In this case, move the product away from the devices. • To prevent the batteries from wearing out, turn the product off when not in use. • Over time, discoloration may occur due to ultraviolet rays (especially direct sunlight) and friction. • Any customization of the product is prohibited by law. Also, disassembly of the product may result in electrical shock, equipment damage or fire. Never disassemble the product. Care • If the product becomes dirty or dusty, disconnect the power plug first, and then wipe the product off with a dry soft cloth. • Do not use benzine, thinner, contact restoring protective agent, or any other chemical agent. Doing so may cause deformation, damage, or malfunction. • When storing the product for an extended period of time, wrap it with a plastic cover, and do not allow it to be exposed to humidity. Part names and functions ATW-R3210 Front panel ❶ ❶ ❷ ❸ ❹ ❺ ❷ ❸ Power switch ( Press the switch to turn the power on. IR sync window Use when syncing transmitter (ATW-T3201/ATW-T3202) to the product. Display Displays the product state and setting menus. BACK button Takes the display back one screen when pressed. Control dial Turn to scroll through settings and press to set them. ❹ ❺ Part names and functions Rear panel ❶ ❶ ❷ ❸ ❷ ❸ ❹ Antenna input jack Attach the antenna directly, or extend it with a low-loss antenna cable. Unbalanced output jack (6 3 mm (1/4")) Balanced output jack (XLR 3-pin male) GND HOT COLD ❹ ❺ Ground lift switch This switch isolates the GND pin of the balanced output from the ground. Normally use in the GROUND position, but if a hum develops due to a ground loop, switch to the "GROUND LIFT" side. Power input jack Connect the DC plug from the included AC adapter for 12 V, 1 A. ❺ Part names and functions ATW-T3201 ❶ ❷ ❸ ❻ ❼ ❺ ❹ ⓮ ❽ ❾ ❿ ⓫ ⓬ ⓯ ⓰ ⓭ ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽ Transmission antenna ❾ MUTE switch Press to switch audio mute on and off. ❿ Indicator Indicates status of power supply or battery by LED. Power ON: lights in green Low battery: lights in red • Lits once when RECALL/Multi function button is pressed and hold. ⓫ ⓬ RECALL/Multi function button Press to turn the screen back on if it shuts off. Press and hold to perform the assigned action. ⓭ ⓮ Microphone input connector Connect a microphone (sold separately). Display Shows the current status. • If no buttons are pressed for a period of 30 seconds, the display will turn off. ⓯ ⓰ SYNC button Use when syncing receiver (ATW-R3210) to the product. UP button Used for selecting various settings. BACK button Returns to the previous operation. Power switch Turns the power on/off. SET button Press to confirm a selection. DOWN button Used for selecting various settings. Battery cover Technical standard conformity certification sticker Using the product without this sticker may cause legal violation. Do not peel off. IR sync window Use when syncing the product to the receiver. Charging terminals Part names and functions ATW-T3202 ❶ ❷ ❸ ❹ ❺❻ ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❼ ❽ ❾ ❽ Grip case ❾ UP button Used for selecting various settings. BACK button Returns to the previous operation. ❿ IR sync window Use when syncing the product to the receiver. ⓫ DOWN button Used for selecting various settings. ⓬ SET button Press to confirm a selection. SYNC button Use when syncing receiver (ATW-R3210) to the product. ⓭ ❿ ⓫ ⓬ ⓭ Power switch Turns the power on/off. Technical standard conformity certification sticker Using the product without this sticker may cause legal violation. Do not peel off. Battery cover RECALL/Multi function button Press to turn the screen back on if it shuts off. Press and hold to perform the assigned action. Indicator Indicates status of power supply or battery by LED. Power ON: lights in green Low battery: lights in red • Lits once when RECALL/Multi function button is pressed and hold. Charging terminals Inserting batteries ATW-T3201 1. 2. 3. ATW-T3202 Slide the battery cover latches inward as shown by the arrows. 1. Rotate the grip case. 2. Open the battery cover located on the back side. 3. Insert the batteries according to the plus (+) and minus (-) marks found inside the battery compartment With the latches pressed in, open the battery cover. Insert the batteries according to the plus (+) and minus (-) marks found inside the battery compartment Installing and removing a microphone (only for ATW-T3202) How to install 1. Install the microphone to the product. 2. Rotate and tighten the microphone. How to remove 1. Rotate and tighten the microphone. 2. Remove the microphone from the product. 10 Display ATW-R3210 ❶ ❷ ❸ ❶ ❷ ❸ ❹ ❺ ❻ ❼ Transmitter information display area ❹ ❺ ❻ ❼ ❿ ⓫ ❽ Key lock status (transmitter) ❾ High pass filter (transmitter) ❿ RF power output (transmitter) ⓫ Battery power indicator (transmitter) ⓬ RF level indicator Displays the reception states of antennas A & B respectively. ⓭ NAME Displays the specified name. ❶ Frequency Displays the specified frequency. 11 ❽ ⓬ ⓭ ❾ ⓮ Mute indicator A mark is displayed when muted. AF level indicator Displays the received audio signal level. Group Channel Frequency Back-up Displays when frequency back-up mode is ON. Key lock status (transmitter) Antenna input jack Displays when antenna power setting is ON. Display Level meter screen ❶ ❸ ❶ ❷ ❸ ❷ ❹ ❺ ❻ ❹ RF power output (transmitter) ❺ Marker (when the minimum hold function is on) The RF level is held at a minimum value. ❻ Mute indicator A mark is displayed when muted. Gain indicator (transmitter) Audio setting (receiver) Peak hold indicator Switching screens The screen switches each time the control dial is turned to the right / left. Main screen Level meter screen 12 Display ATW-T3201 / ATW-T3202 The main screen is displayed when the power is switched on. Pressing the UP / DOWN button on the main screen switches the screen display. ❶ ❷ ❶ ❷ ❸ ❹ ❸ ❻ ❹ ❺ ❸ ❼ ❹ ❺ Frequency Displays the specified frequency. ❻ Key lock status ❼ Battery power indicator ❽ RF power output : RF Power High (30mW) : RF Power Low (10mW) : RF Power Off 13 High pass filter Displays the specified name. NAME Displays the specified name. Group Channel ❷ ❽ ❸ ❹ ❺ Basic operation About settings 1. The various settings of this product can be made from the main menu. Turn the receiver (ATW-R3210) power on. • Display lights and the main screen appears. ATW-R3201 1. Press the control dial. • The main menu is displayed. 2. Set the operating frequency. 3. Turn the transmitter (ATW-T3201/ATW-T3202) power on. • The indicator lights and the main screen appears. ATW-T3201 4. ATW-T3202 2. Turn the control dial to select the item you wish to set. 3. Pressing the control dial opens the settings menu of the selected item. • Press the BACK button to go back one screen. Check the RF level indicator. • To cancel part way through making a setting, press the BACK button. • Check that antenna A or B lights up. 5. • While in the setting mode, the display will return to the main screen if 60 seconds pass without a button or the control dial being used. Speak into the mic. • Make sure the AF level indicator lights up. ATW-T3201/ATW-T3202 1. Press the SET button. • The main screen mode is displayed. ATW-T3201 2. ATW-T3202 Press the UP/DOWN button to select the item you wish to set. Selected menu item 3. Current value Pressing the SET button opens the settings menu of the selected item. • Press the BACK button to go back one screen. • To cancel part way through making a setting, press the BACK button. • While in the setting mode, the display will return to the main screen if 30 seconds pass without a button or the control dial being used. 14 Setting NAME ATW-R3201 Settings The following characters can be entered: • The maximum number of characters that can be entered is 8. • The following characters can be entered: Setting the operating frequency Setting manually 1. From the main menu, turn the control dial, select [Frequency] and then press the control dial. 2. Select [Manual] and then press the control dial. 3. Turn the control dial and set the first 3 digits. finished setting them, press the control dial. 4. Alphabetical characters (upper case) Numbers Symbols (+, -, #, &, period) Space 1. From the main menu, turn the control dial, select [Name] and then press the control dial. 2. Turn the control dial to display the character you wish to set and then press the control dial. • The character is input and the cursor moves to the right. Turn the control dial and set the last 3 digits. finished setting them, press the control dial. • The setting is complete. 3. Enter all the desired characters in the same way as in step (2). 4. Turn the control dial to select [End] and then press the control dial. • The setting is complete. Setting by group/channel 1. From the main menu, turn the control dial, select [Frequency] and then press the control dial. 2. Select [Gr/Ch] and then press the control dial. 3. Turn the control dial and set the group. finished setting them, press the control dial. 4. Turn the control dial and set the channel. finished setting them, press the control dial. • The setting is complete. 15 Setting the audio output level 1. From the main menu, turn the control dial, select [Audio] and then press the control dial. 2. Turn the control dial and set the audio output level. Setting transmitters via IR sync This function allows you to make transmitter settings on the product and then automatically configure the transmitter via IR sync. Setting items and setting values are shown as follows. Item • The level changes 2dB +/- each time you turn the control dial. • It can be set from -60 to 0 dB. Current setting, No change Name Current setting, No change RF Power Gain -10 to +20dBm, No change Lock, No change HPF Press the control dial. • The setting is complete. Scanning for free channel From the main menu, turn the control dial, select [Group Scan] and then press the control dial. 2. Turn the control dial and set the group. After selecting the group, press jet control dial. 3. Turn the control dial to select the scanning sensitivity. After selecting the scanning sensitivity, press jet control dial. Confirm the scan result, turn the control dial to select [OK] and then press the control dial. • Select [Retry] to rescan. 5. OFF, ON, No change From the main menu, turn the control dial, select [TX Setting] and then press the control dial. 2. Turn the control dial to select each item and then press the control dial. 3. Turn the control dial to select the setting value and then press the control dial. 4. Turn the control dial to select [Scan Start] and then press the control dial. • A standby screen is displayed. Refer to “XXX” (p. XX). • The scan starts. 4. Alkaline, Ni-MH, No change 1. Scan unused channels in the surrounding area currently being used. 1. Low:10mW, High:30mW, No change Lock Battery 3. Setting value Freq Available channels and frequencies are displayed in a list. Turn the control dial to select free channels and then press the control dial. • The setting is complete. 16 Setting the squelch level Setting the system-related functions Setting automatically Setting the key lock 1. Set this function to prevent the product settings from being changed. From the main menu, turn the control dial, select [Squelch] and then press the control dial. 2. Turn the control dial to select [Auto] and then press the control dial. 3. Turn the control dial to select [Normal]/[Range]/[Rubust] and then press the control dial. • The default setting is [OFF]. • The scan starts. 1. From the main menu, turn the control dial, select [System] and then press the control dial. 2. Turn the control dial to select [Lock] and then press the control dial. 3. Select the key lock and then press the control dial. • The setting is complete. 4. The scan result is displayed. Press jet control dial. • The setting is complete. Setting the antenna power This turns power on/off to the antenna input terminals • The default setting is [OFF]. • If set to [ON], power is supplied to both antennas A and B. Setting manually 1. 2. 3. From the main menu, turn the control dial, select [Squelch] and then press the control dial. Turn the control dial to select [Manual] and then press the control dial. Turn the control dial to select the value you wish to set. From the main menu, turn the control dial, select [System] and then press the control dial. 2. Turn the control dial to select [ANT PWR] and then press the control dial. 3. Turn the control dial to select [ON]/[OFF] and then press the control dial. • The setting is complete. • The meter indicates the RF level. • You can set it from 11 dBμV 35 dBμV. 4. 1. Press jet control dial. • The setting is complete. 17 Setting group/channel editing Setting frequency back-up 1. From the main menu, turn the control dial, select [System] and then press the control dial. 1. From the main menu, turn the control dial, select [System] and then press the control dial. 2. Turn the control dial to select [Gr/Ch Edit] and then press the control dial. 2. Turn the control dial to select [Back-Up Ch] and then press the control dial. 3. Turn the control dial to select the group and then press the control dial. 3. Turn the control dial to select [ON] and then press the control dial. 4. Turn the control dial to select the channel and then press the control dial. 4. Turn the control dial to select [Manual]/[Gr/Ch] and then press the control dial. • When [Manual] is selected, the frequency can be set. • When [Gr/Ch] is selected, the group/channel can be set. 5. Turn the control dial to select [SET]/[RESET] and then press the control dial. • Press [SET] to set the frequency of the selected channel. • Press [RESET] to blank the frequency of the selected channel. 6. After setting all the channels, select [SET]/[Sync] and press the control dial. 5. • When selecting [SET], the setting is complete. • When selecting [Sync], IR sync standby is displayed after the setting is complete. Turn the control dial to select [SET]/[Sync] and then press the control dial. • When selecting [SET], the setting is complete. • When selecting [Sync], IR sync standby is displayed after the setting is complete. Setting main screen layout 1. From the main menu, turn the control dial, select [System] and then press the control dial. 2. Turn the control dial to select [Main Display] and then press the control dial. 3. Turn the control dial to select [Frequency Mode]/[Name Mode]/ [Gr/Ch Mode] and then press the control dial. • The setting is complete. 18 Setting main screen level mater Resetting factory defaults 1. This returns the settings to their factory defaults. 2. 3. From the main menu, turn the control dial, select [System] and then press the control dial. Turn the control dial to select [AT Meter] and then press the control dial. Turn the control dial to select [RX]/[TX] and then press the control dial. • The setting is complete. 1. From the main menu, turn the control dial, select [System] and then press the control dial. 2. Turn the control dial to select [Reset] and then press the control dial. 3. Turn the control dial to select [Yes] and then press the control dial. 4. After the confirmation screen is displayed, turn the control dial again to select [Yes] and press the control dial. Setting display brightness 1. From the main menu, turn the control dial, select [System] and then press the control dial. 2. Turn the control dial to select [Brightness] and then press the control dial. 3. Turn the control dial to select [Hight]/[Low] and then press the control dial. • Reset starts. • The setting is complete. Checking the product information This function displays product information. Setting user access level 1. From the main menu, turn the control dial, select [System] and then press the control dial. 2. Turn the control dial to select [Access] and then press the control dial. 3. Turn the control dial to select [Free Tuning]/[User Group Only] and then press the control dial. • The setting is complete. 19 1. From the main menu, turn the control dial, select [System] and then press the control dial. 2. Turn the control dial to select [Version] and then press the control dial. Setting NAME ATW-T3201/ATW-T3202 settings The following characters can be entered: • The maximum number of characters that can be entered is 8. • The following characters can be entered: Setting the transmission frequency 1. From the main menu, press the UP/DOWN button to select [FREQUENCY] and then press the SET button. 2. Select [MANUAL] and press the SET button. 3. Press the UP/DOWN button and set the first 3 digits. After completing the setting, press the SET button. Alphabetical characters (upper case) Numbers Symbols (+, -, #, &, period) Space 1. From the main menu, press the UP/DOWN button to select [NAME] and then press the SET button. 2. Press the UP/DOWN button to select the character you want to set and then press the SET button. • The character is input and the cursor moves to the right. 4. Press the UP/DOWN button and set the last 3 digits. After completing the setting, press the SET button. • The setting is complete. 3. Enter all the desired characters in the same way as in step (2). • If you do not enter 8 characters, press the UP / DOWN button, select [End], and press the SET button Setting group/channel 1. From the main menu, press the UP/DOWN button to select [FREQUENCY] and then press the SET button. 2. Select [Gr/Ch] and press the SET button. 3. Press the UP/DOWN button and set the group. After completing the setting, press the SET button. 4. At the 8th character, press the SET button. • [End] is displayed. 5. Press the SET button. • The setting is complete. Setting gain 4. Press the UP/DOWN button and set the channel. After completing the setting, press the SET button. 1. From the main menu, press the UP/DOWN button to select [GAIN] and then press the SET button. 2. Press the UP/DOWN button and set the gain. • The setting is complete. • The level changes 2 dB +/- each time you press the UP/DOWN button. 3. Press the SET button. • The setting is complete. 20 Setting RF output 1. From the main menu, press the UP/DOWN button to select [RF POWER] and then press the SET button. 2. Press the UP/DOWN button and select RF output as [Low: 10 mW]/[High: 30 mW]/[OFF]. 3. Setting button mode The function is assigned when RECALL/Multi function button is pressed and hold. 1. From the main menu, press the UP/DOWN button to select [BUTTON MODE] and then press the SET button. 2. Press the UP/DOWN button to select the item you wish to set. Disable Press the SET button. No function Normal Mute Muted (only for ATW-T3202) • The setting is complete. Forced Mute Mute in on when key is locked. (only for ATW-T3202) BKUP CH Frequency backup mode (When selected, frequency, group, and channel are set.) RF Off RF output is OFF. Setting HPF (High Pass Filter) 1. From the main menu, press the UP/DOWN button to select [HPF] and then press the SET button. 2. Press the UP/DOWN button to select [ON]/[OFF]. 3. Press the SET button. • The setting is complete. Setting mute mode (only for ATW-T3201) 3. Set the MUTE switch function. Press the SET button. • The setting is complete. 1. From the main menu, press the UP/DOWN button to select [MUTE MODE] and then press the SET button. 2. Press the UP/DOWN button to select the item you wish to set. Setting key lock 1. From the main menu, press the UP/DOWN button to select [LOCK] and then press the SET button. 2. Press the UP/DOWN button to select [Lock]/[Unlock]. Normal Mute Muted Forced Mute Mute in on when key is locked. Disable No function 3. Press the SET button. • The setting is complete. Lock Keys locked Unlock Keys unlocked 3. Press the SET button. • The setting is complete. 21 Setting user access level Setting the system-related functions Setting battery 1. From the main menu, press the UP/DOWN button to select [System] and then press the SET button. 2. Press the UP/DOWN button to select [ACCESS] and then press the SET button. 3. Press the UP/DOWN button to select [Free]/[User Group]. 4. Press the SET button. Set the type of batteries used. 1. From the main menu, press the UP/DOWN button to select [System] and then press the SET button. 2. Press the UP/DOWN button to select [BATTERY] and then press the SET button. 3. Press the UP/DOWN button to select battery type. Alkaline Select for alkaline batteries Ni-MH Select for nickel–metal hydride batteries • The setting is complete. Resetting factory defaults 4. This returns the settings to their factory defaults. Press the SET button. • The setting is complete. • If the appropriate setting is not made for the batteries used, the battery power indicator does not display the correct information. Always set the type of battery according to the batteries used. 1. From the main menu, press the UP/DOWN button to select [System] and then press the SET button. 2. Press the UP/DOWN button to select [RESET] and then press the SET button. 3. Press the UP/DOWN button to select [Yes]. 4. After the confirmation screen is displayed, press the UP/DOWN button again to select [Yes]. 5. Press the SET button. Setting LED 1. From the main menu, press the UP/DOWN button to select [System] and then press the SET button. 2. Press the UP/DOWN button to select [LED] and then press the SET button. 3. Press the UP/DOWN button to select [ON]/[OFF]. • Reset starts. 4. Press the SET button. • The setting is complete. Checking the product version This function displays product version. 1. From the main menu, press the UP/DOWN button to select [System] and then press the SET button. 2. Press the UP/DOWN button to select [VERSION] and then press the SET button. • The version is displayed. 22 Attaching the product to user's body (ATW-T3201) The product is equipped with a clip. Use that to attach the product to a belt, pocket or other piece of clothing that will hold it. You can reverse the direction that the input connector faces by attaching the clip in the opposite direction. Pull both sides of the clip firmly to the outside to remove the clip from the product. Making connections (basic connections) This example is of connections made when using one ATW-R3201. When connecting more than one ATW-R3201 via a distributor (sold separately), refer to the distributor's user manual. Antenna Antenna Mixer IN 23 Power cable
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Language : ja-JP XMP Toolkit : Adobe XMP Core 5.6-c123 79.158978, 2016/02/13-01:11:19 Create Date : 2017:10:30 18:40:11+09:00 Metadata Date : 2017:10:30 18:40:25+09:00 Modify Date : 2017:10:30 18:40:25+09:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Instance ID : uuid:60c29142-3777-1744-bf06-2735e626eff4 Original Document ID : xmp.did:B235B51FDF65E511A7E2ABEC1EE20B41 Document ID : xmp.id:449a42e0-b783-4477-9097-491d64251f23 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:b8648654-8ae1-48be-8b1d-ad5c922e3239 Derived From Document ID : xmp.did:4ed69acb-bc61-4fee-84a6-63cafd4b9371 Derived From Original Document ID: xmp.did:B235B51FDF65E511A7E2ABEC1EE20B41 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2017:10:30 18:40:11+09:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 24 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools