Audiovox Fpe2705 Users Manual 1287354
FPE2705 to the manual 1ea026f1-1f6d-4bc2-aec9-47053218edba
2015-02-02
: Audiovox Audiovox-Fpe2705-Users-Manual-401409 audiovox-fpe2705-users-manual-401409 audiovox pdf
Open the PDF directly: View PDF 
.
Page Count: 44
| Download | |
| Open PDF In Browser | View PDF |
Operating Instructions __________________________________________________ Model No.: FPE2005 20” LCD TV For assistance, please call: 1-800-619-3848 Or visit us at http://www.audiovox.com 128-7354 Congratulations on your purchase of this LCD TV. We recommend that you read this manual thoroughly before use to fully enjoy the many functions and excellent features of this unit. Keep this manual in an easily accessible location for future reference. Note:Screen displays and illustrations in this manual may differ from the actual model. Contents Index Overview Important safety information Important safety cautions Accessories Identification of controls Control buttons Back Remote control Installation Basic operations Main on-screen-display (OSD) introduction Operations Picture adjustment System setting Audio setting Channel setting Selecting channel OSD setting Timer setting Operations in YbPr mode TV troubleshooting Notices Maintenance/repair Specifications 3 4 5 7 8 8 9 10 12 19 20 2 21 21 22 27 29 31 32 33 34 36 40 41 42 Overview General Description This Audiovox product is a Color Active Matrix liquid Crystal Display (LCD) with an integral Cold Cathode Fluorescent Lamp (CCFL) backlight system. The matrix employs a Thin Film Transistor (TFT) as the active element. This TFT-LCD has a 20.1 inch diagonally measured active display area with a native 640x480 pixel resolution. Each pixel is divided into red, blue, and green sub-pixels which are arranged in vertical stripes. The color palette is capable of more then 16.7 million colors. This Audiovox product incorporates a tilt stand that can be removed for easy wall mounting. The wall mounting compatibility of this product is completed by incorporating a VESA 100 wall mount standard bolt configuration. A separate VESA 100 compatible wall mount kit will be required to properly secure the unit to the wall. This units has a great viewing angle allowing the unit to be seen at almost any viewing angle with minimal loss in picture quality. The high brightness and contrast ratio will make this TV a pleasure to watch. 3 Important Safety Information The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “DANGEROUS VOLTAGE” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The Exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (Servicing instructions in the literature accompanying the product). Federal Communication Commission This Equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectio n against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications If this equipment does cause or receive interference, which can be determined by turning equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the TV antenna Increase the separation between TV and other equipment. Connect TV into separate outlet from equipment. Consult the dealer or an experienced radio/TV technician for help FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment 4 Important Safety Cautions When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Do not expose this unit in the rain or spatter by liquid. Do not use this product near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. Do not use immediately after moving from a low temperature to high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards. Heat sources-Keep the product away from heat sources such as radiators, heaters, stoves and other heat generating products (including amplifiers). Requirement of environment temperature: 0oC~50oC for storage; 5oC~40oC for working The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer's instructions are followed. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a trolley, stand, tripod, and bracket or table recommended by the manufacturer or sold with the product. 5 Important Safety Cautions When relocating the product placed on a trolley, it must be moved with the utmost care. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley. The power cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product. Powersupply cords should be routed so that they are not likely to be walked on or snagged by items placed upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product. If the power cord or the plug is damaged contact a qualified service department for service. Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock. High Voltage exists in this TV set. Do not remove the cover. In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger. The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the LCD panel breaks. Don't try to push anything into the cabinet or place any vessel with water on the TV set. For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges. 6 Important Safety Cautions Important Information Regarding use of Video Games, Computer, captions or other fixed images displays The extended use of a fixed image program material can cause permanent “Shadow Image” on the LCD panel. The background image is viewable on normal programs in the form of stationary fixed images. This type of irreversible LCD panel deterioration can be limited by observing the following steps: * Reduce the Brightness and Contrast settings to a minimum viewing level * DO NOT display the fixed image for extended periods of time * Turn the power OFF when not in actual use Recycling This product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance Environment at: http://www.eiae.org/ Accessories 1.. 2.. 3.. 4.. 5.. 6.. FPE2000 TV unit Power adaptor (AC/DC) AC Power cord Remote Control (Model Specific) Batteries Audio/Video cable (RCA) 7 Identification of controls Control buttons Control Panel SOURCE MENU Menu CH CH VOL VOL Power On/ Standby Channel Down/Up Volume Down/Up Select Input Signal Speaker Speaker Remote Sensor Power Indicator 1. SOURCE The Power Indicator light will glow To access the SOURCE select menu yellow when the set is turned on, 2. MENU and glows red when the set is in Press this button to access the MENU main page. the standby mode. 3. CH +/Change the TV channel. In OSD Menu, press these buttons to choose the OSD items. 4. VOL +/Increase or decrease the sound volume level. In OSD Menu, press these buttons to adjust the value or setting of each item 5. POWER ( ) Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY. Note: SOURCE, MENU, CH+/-, VOL+/- and POWER( ) on the main unit have the same functions as the corresponding buttons on the remote control. This operation manual provides a description based on operating functions with the remote control. 8 Identification of controls (continued) Back 2 1 DC 12V PC - AUDIO Y Pb Pr 4 3 R AUDIO L PHONE VIDEO HDT V IN L AUDIO R AV OUT 6 5 VIDEO L AUDIO R S-VIDEO AV IN 1. DC POWER input Connect to the DC output of the Power Adapter. 2. HDTV input (Y, Pb, Pr, Audio L, R) Connect to the Y/Pb/Pr (or Y/Cb/Cr) and audio output jacks of a Set-Top Box or DVD player. 3. Headphone 3.5mm jack 4. AV outputs (Video, Audio L, R) Connect to the VCR input jacks to record programs. 5. AV inputs (Video, Audio L, R) Receive video/audio signals from external sources such as VCR or DVD player. 6. S-Video input Receive a S-Video signal from external source such as VCR or DVD player. 7.Coaxial cable & Antenna input 9 7 RF Remote Control Power on/standby Mute Volume up/down selector; In the menu operation, adjust the selected item Channel up/down selector. In menu operations, used to select item. Access the menu Exit the menu S.M Select OSD menu position Sound preset mode selector Setting sleep timer Change audio to mono, stereo or SAP Auto correct picture Previous channel Display the current state Select picture mode between Bright, Nature, Soft & User Direct channel selector Select the input signal source Adjust the treble Adjust the bass Flip the cover open in the arrow direction. 10 Preparing the Remote Control Please install the batteries before using the remote control. Batteries for the Remote Control If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control. 1 Open the battery cover. 2 <(Slide the cover while pressing down.) Insert two size-AAA batteries. 3 Replace the cover and slide in reverse until the lock snaps. <(Place the batteries with their terminals corresponding to the (+) and (-) indications in the battery compartment.) Effective range of the remote control Notes: 1.When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries. 2.Do not drop or dampen the remote control. 3.Do not disassemble the remote control. 4.There should be no obstacle between the TV and the transmitter. 5.Use the remote control within the effective 30 30 5m range as shown in the figure on the left. 6.If the remote control does not work, please check whether the batteries are exhausted or if they have been installed properly. 7.When direct sunlight, and incandescent lighting, fluorescent lamp or any other strong light shines on the remote sensor of the TV, the remote operation can be come erratic. 8.Do not mix different types of batteries in the remote. 11 Installation Install the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Antenna connections OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT INCLUDED) Follow the instructions for the type of antenna system you intend to use. If using Cable or satellite, see the next page. Combination VHF/UHF Combination VHF/UHF Antenna (Single 75 Ohm cable Antenna (Separate VHF and or 300 Ohm twin-lead wire) UHF 300 Ohm twin-leads) UHF 300 Ohm VHF/UHF Ohm 75 OHM Connect the 75 Ohm cable from combination VHF/UHF antenna to the antenna jack. OR If your combination antenna has a 300 Ohm twin-lead wire, use a 300-75 Ohm matching transformer (NOT SUPPLIED). Combiner VHF 300 Ohm Connect the UHF twin-lead wire to a combiner (NOT SUPPLIED). Connect the VHF twin-lead to a 300-75 Ohm matching transformer (NOT SUPPLIED). Attach the transformer to the combiner. Attach the combiner to the antenna jack. 12 UHF 300 Ohm Combiner VHF 75 Ohm Connect the 75 Ohm cable from the VHF antenna and the UHF antenna twin-lead wire to a combiner (NOT SUPPLIED). Attach the combiner to the antenna jack. NOTE: If your VHF antenna has a twin-lead wire use a 300-75 Ohm matching transformer, then connect the transformer to the Installation Cable (CATV)/satellite connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some Cable TV companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company. FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE For basic cable service not requiring a converter/descrambler box, connect the CATV 75 ohm coaxial cable to the VHF/UHF jack on the rear of the TV. FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE OR SATELLITE If you subscribe to a satellite service or a cable TV service which requires the use of a converter/ descrambler box, connect the incoming 75 Ohm coaxial cable to the converter/descrambler box. Using another 75 Ohm cable, connect the output of the converter/descrambler or satellite box to the antenna jack on the TV. Follow the connections shown below. Set the TV/VCR to the output channel of the converter/descrambler or satellite box (usually 3 or 4) and use the converter/descrambler or satellite box to select channels. INCOMING 75 Ohm CATV CABLE CONVERTER/DESCRAMBLER OR SATELLITE BOX (NOT SUPPLIED) 75 Ohm CABLE TO TV/VCR FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH SCRAMBLED PREMIUM CHANNELS If you subscribe to a satellite service or a cable TV service in which basic channels are unscrambled and premium channels require the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B switch box (available from the cable company or an electronic supply store). Follow the connections shown below. With the switch in the "B" position, you can directly tune any nonscrambled channels on your TV. With the switch in the "A" position, tune your TV to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to tune scrambled channels. CONVERTER/DESCRAMBLER (NOT SUPPLIED) INCOMING 75 Ohm CATV CABLE A B SPLITTER (NOT SUPPLIED) 13 A/B SWITCH (NOT SUPPLIED) 75 Ohm CABLE Installation(continued) Power connection 3 Household power outlet 2 Power cord 1 Connect to the DC input socket of the back of the product. Be sure to fully insert plug into the connection and confirm it is secure. AC adapter 1. Connecting the female plug to the AC socket on AC adapter. 2. Connecting the AC adapter to the DC power input of the set. 3. Connecting the male plug to the wall outlet as illustrated. Note: