Aukey E Business LT-B4 Smart LED Light Bulb User Manual Users manual
Shenzhen Aukey E-Business Co.,Ltd Smart LED Light Bulb Users manual
Users manual
Introduction
Thank you for choosing Aglaia LT-B4 Smart LED Light Bulb. Please read
the user manual carefully and keep it for future reference. If you need
further assistance, please contact Aglaia customer support by emailing
to support@aglaiahome.com.
Package Contents
Aglaia Smart LED Light Bulb
User Manual
Warranty Card
Specifications
Before Use
1. Use your smart phone or tablet scan QR code or search for "Smart
Lamps"in the App Store or Google Play Store to get the application.
2. Install the smart bulb into E26/E27 socket.
Pairing
1. Take your device within 10 meters of the smart bulb.
2. Turn on your wireless function and open the APP “Smart Lamps”.
3. Touch on the top left corner of screen, then touch to connect
the smart bulb with your device.
4. turns to , which represents the smart bulb is matched with
your device.
Notes
1. Please ensure wireless function is on.
2. If it shows with , this means your device disconnects the smart bulb.
3. Your device will disconnect the smart bulb several minutes afte r
there is no operation with the application.
4. Maximum wireless operating range is 10 meters. If you exceed this
range,
the smart bulb may disconnect and out of control with the device.
5. If you cannot search the smart bulb, please close the applicati on
and open it again for the mistake.
Power On/Off
Turn on/off the smart bulb by touching after connecting.
Application Introduction
After pairing, you can control the smart
bulb with your device. Touch , then
touch “Setting”to select the functions:
Color, Cold, Warm.
A. Color Control
Choose the “Color”mode,
the operation interface of
“Smart Lamps”are as shown:
2. Device Setting
Connect or disconnect the smart bulbs, and rename the connected bulbs
with your desire.
3. Shake & Dance
(1) Shake: Jiggle the device to change the bulb's color.
(2) Dance: Color keeps changing with every movement.
4. Music
The bulb's color keeps changing with music rhythm.
5. Timing
Touch on the top right corner of screen, there are two ways for
you to add timing.
Notes
1. Please operate the smart bulb within wireless operating range.
2. The smart bulb will light up when there are operations with the
application.
3. The application can control 6 bulbs at most simultaneously.
Cautions
●This user manual is based on version 1.5.2, please do related
operation
with the smart lamp after updating
●Please turn off the switch before installing the bulb
●Do not use this bulb in the airtight container
●Do not use wet towel to scrub the light
●Do not install the light in the water leaking or unstable place
●To avoid the eye injury, do not stare at the LED light for long time
●For indoor use ONLY
Warranty
a,We warrant Aglaia products for 24 MONTHS from date of the original
purchase. If the product fails due to any manufacturing defect, please
contact Aglaia support by emailing to support@aglaiahome.com with
your purchase order ID and details of the problem.
We only provide after-sales support for products purchased from Aglaia
orAglaia authorized distributors. If you have purchased the product from
aseller other than Aglaia, please contact your seller for warranty cover.
B,Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between theequipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help