Autec s r l AIRRT42FH Radio module User Manual

Autec s.r.l. Radio module

User Manual

airrt42fh_instruction_manual-rev011Instruction Manual for AIRRT42FH radio module Original instructions
airrt42fh_instruction_manual-rev012INDEX1. Description AIRRT42FH radio module ................................................................................31.1 Identication ................................................................................................................................ 31.2 Technical data ........................................................................................................................... 31.3 Photos ......................................................................................................................................... 32. Applications .........................................................................................................................53. Functional description ........................................................................................................64. Frequencies groups .............................................................................................................74.1 Frequencies group “A” ................................................................................................................. 74.2 Frequencies group “B” ................................................................................................................. 74.3 Frequencies group “C” ................................................................................................................ 84.4 Frequencies group “D” ................................................................................................................. 85. Antenna ................................................................................................................................96. Approval for US ..................................................................................................................106.1 FCC ........................................................................................................................................... 106.2 FCC End Product Labeling ........................................................................................................ 107. Approval for Canada ..........................................................................................................117.1 ISED .......................................................................................................................................... 117.2 ISED .......................................................................................................................................... 117.3 ISED End Product Labeling ....................................................................................................... 117.4 ISED Étiquetage du produit nal ............................................................................................... 11
airrt42fh_instruction_manual-rev0131. Description AIRRT42FH radio module1.1 IdenticationEquipment radio module Radio module AIRRT42FHUsed frequency band 915-928 MHzManufacturer AUTEC srl Via Pomaroli, 65I-36030 CALDOGNO (VI)1.2 Technical data Used frequency band 915 - 928 MHzType of modulation 10312 Baud RC-FSKChannel spacing 50 kHzDuplex direction half duplexHamming distance >=9Probability of non-recognition of error <4*10 exp-9Dimensions (93x60x5,4) mmPower supply 12Vdc (+/- 10%)Transportation range temperature -40°C to +70°C (-40°F to +158°F)Storage range temperature -40°C to +70°C (-40°F to +158°F)Use range temperature -20°C to +70°C (-4°F to +158°F)1.3 PhotosFront view
airrt42fh_instruction_manual-rev014Back view
airrt42fh_instruction_manual-rev0152. Applications The AIRRT42FH radio module can be used for the equipment that is installed in machinery .This equipment must be xed on the machinery. In addition to the above, this radio module cannot be installed: -inside equipment that is portable by user -in equipment that are intended for the use in environments requiring explosion-proof features or in any usage situation that may pose the risk of explosion. -in equipment for moving, raising and transporting people, if the Machine’s characteristics and their related risks and/or the risks related to the use of a Radio Remote Control do not make it possible for the Machine Manufacturer to ensure that all the safety requirements are met. Such requirements must be taken into account when designing and manufacturing the Machine, also bearing in mind that a radio module will be used. The Machine Manufacturer may allow the installation and use of the radio module on such applications under their own responsibility. -in equipment that create or can create dangerous situations if they stop due to the loss of radio link. -in equipment that do not allow a risk-free installation of a radio module, due to their functions or features and/or to the risks related to their use. -if the applicable safety-related laws in the country where the Machine is used, regulations and stan-dards (even local ones), even concerning safety in the workplace, do not allow the use of radio module to control the Machines.INSTALLATION OF AIRRT42FH RADIO MODULE IN THE ABOVE-MENTIONED EQUIPMENT AND SI-TUATIONS MAY CAUSE SERIOUS INJURY OR DEATH OR PROPERTY DAMAGE.
airrt42fh_instruction_manual-rev0163. Functional description The AIRRT42FH radio module is transceiver module and it is based on the commercial RFIC (Radio Fre-quency Integrated Circuit) ADF7021 made by Analog Devices, which encompasses all the circuits and functions needed to build a narrowband, high performance, UHF transceiver for digital signalling. See Analog Devices’ website for a complete and up-to-date description of ADF7021.It can operate on a wide range of frequencies with simple re-programming; this feature has allowed the development of a dual-band radio, capable of communicating on 915-928MHz under north-american FCC part 15.247 as well as on 863-870MHz under european EN300220 radio standards.To prevent improper or illegal use of the dual-band feature, procedure for choosing of the frequency band will not be disclosed to the nal user. It will be managed at Autec production site, or at an authorised tech-nical service site, where trained personnel with adequate instrumentation will be able to choose and verify the correct option for any specic geographical area.
airrt42fh_instruction_manual-rev0174. Frequencies groupsIn the AIRRT42FH radio module there are 4 groups selectable inside the 256 channels available: group A, group B, group C, group D.4.1 Frequencies group “A”The channel range of group A is 915.100 - 927.700MHz.The group contains 64 channels with a minimum space between them of 150kHz.4.2 Frequencies group “B”The channel range of group B is 915.200 - 927.800MHz.The group contains 64 channels with a minimum space between them of 150kHz.
airrt42fh_instruction_manual-rev0184.3 Frequencies group “C” The channel range of group C is 915.050 - 927.800MHz.The group contains 74 channels with a minimum space between them of 100kHz.4.4 Frequencies group “D”The channel range of group D is 915.100 - 927.800MHz.The group contains 85 channels with a minimum space between them of 100kHz.
airrt42fh_instruction_manual-rev0195. Antenna This radio module has been approved to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.Antenna external dedicated antenna provided by AutecAntenna Type quater wavelength monopoleAntenna gain <= 2dBiAntenna Impedance 50 ohmAutec allows you to use only the dedicated antenna supplied either with the raio module or as original spare part. The use of any other type of antenna is prohibited and will invalidate tdhe warranty.Place the dedicated antenna in a position that ensures a minimum separation distance of 20cm from all the people that can be in the working area.
airrt42fh_instruction_manual-rev01106. Approval for US6.1 FCCThis radio module complies with Part 15 of the FCC Rules. Operation is subject to the following two con-ditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesira-ble operation.Any changes or modications not expressly approved by Autec could void the user’s authority tooperate the equipment.The FCC ID for this radio module is OQA-AIRRT42FH.6.2 FCC End Product LabelingThe AIRRT42FH module is labeled with its own FCC ID. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the nal end product must be labeled in a visible area with the following: -“Contains Transmitter Module FCC ID: OQA-AIRRT42FH” -“Contains FCC ID: OQA-AIRRT42FH”
airrt42fh_instruction_manual-rev01117. Approval for Canada7.1 ISEDThis radio transmitter has been approved by Industry Canada to operate with the external dedicated an-tenna. Other antenna types are strictly prohibited for use with this device.This device complies with Industry Canada’s license-exempt RSS standards. Operation is subject to thefollowing two conditions:1. This device may not cause interference; and2. This device must accept any interference, including interference that may cause undesired operationof the device.The IC for this radio module is 9061A-AIRRT42FH.7.2 ISEDCet émetteur radio a reçu l’approbation d’Industrie Canada pour une exploitation avec l’antenne puce in-corporée. Il est strictement interdit d’utiliser d’autres types d’antenne avec cet appareil. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts delicence. L’exploitation est autorisée aux deux conditions suivantes:1. L’appareil ne doit pas produire de brouillage; et2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible de provoquer un fonctionnement non désiré de l’appareil.Le IC pour ce module radio est 9061A-AIRRT42FH.7.3 ISED End Product LabelingThe AIRRT42FH module is labeled with its own IC ID. If the IC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the nal end product must be labeled in a visible area with the following: -“Contains Transmitter Module IC: 9061A-AIRRT42FH.” -“Contains IC: 9061A-AIRRT42FH”. 7.4 ISED Étiquetage du produit nalL’étiquette du Module AIRRT42FH porte son propre identiant IC. Si l’identiant IC n’est pas visible quand le module est installé à l’intérieur d’un autre appareil, alors l’extérieur de l’appareil dans lequel le module est installé doit aussi porter une étiquette faisant référence au module qu’il contient. Dans ce cas, une étiquette comportant les informations suivantes doit être apposée sur une partie visible du produit nal. -“Contient le module émetteur IC: 5123A-WT41U” -“Contient IC : 5123A-WT41U”.
airrt42fh_instruction_manual-rev0112

Navigation menu