Autec s r l LKNLA1JH Transceiver unit User Manual 1
Autec s.r.l. Transceiver unit 1
Contents
User Manual 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4010776 |
| Application ID | +xW+iSSe+1SlLW4ZFlJlLQ== |
| Document Description | User Manual 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 56.2kB (702454 bits) |
| Date Submitted | 2018-09-19 00:00:00 |
| Date Available | 2018-09-19 00:00:00 |
| Creation Date | 2018-07-26 12:21:55 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2018-07-26 12:21:56 |
| Document Title | User Manual 1 |
| Document Creator | Adobe InDesign CC 13.0 (Windows) |
LIUACFH01_eng-00
Instruction Manual for the use and the
maintenance of the Radio Remote Control
Original instructions
Part B: Conformity and frequencies
(863-870MHz and 915-928MHz)
AIR SERIES
WARNING
THIS PART OF THE MANUAL CONSISTS OF Part B - Information, instructions and
warnings for the Conformity and frequencies (863-870MHz and 915-928MHz). The
Manual consists of Part A – General, Part B – Conformity and Frequencies, Part C –
Transmitting Unit, Part D – Receiving Unit and Part E – Battery and Battery Charger,
plus the Technical Data Sheet.
THIS MANUAL, INCLUDING ALL PARTS THEREOF, AND ALL INSTRUCTIONS CONTAINED
HEREIN, MUST BE READ CAREFULLY AND UNDERSTOOD BEFORE INSTALLING,
USING, MAINTAINING OR REPAIRING THE AUTEC RADIO REMOTE CONTROL.
FAILURE TO READ AND COMPLY WITH ALL APPLICABLE WARNINGS AND
INSTRUCTIONS OR ANY ONE OF THE LIMITATIONS NOTED IN THIS MANUAL CAN
RESULT IN SERIOUS BODILY INJURY OR DEATH, AND/OR PROPERTY DAMAGE.
THE AUTEC RADIO REMOTE CONTROL IS NOT A STANDALONE PRODUCT AND IS
INTENDED ONLY AS A COMPONENT ON A MACHINE:
-- ON WHICH AND WHERE THE USE OF A RADIO REMOTE CONTROL IS APPROPRIATE,
-- THAT CAN BE OPERATED SAFELY AND IN ACCORDANCE WITH ALL APPLICABLE
LAWS, REGULATIONS AND STANDARDS BY SUCH REMOTE CONTROL.
ACCORDINGLY, IT IS THE RESPONSIBILITY OF THE MACHINE MANUFACTURER ON
WHICH THE AUTEC REMOTE CONTROL IS INTENDED TO BE INSTALLED, to perform
an in-depth and accurate risk assessment to determine if the Autec Radio Remote
Control is suitable for operating a Machine in conditions of safety and operational
effectiveness, taking into account the conditions of use, the intended uses and the
reasonably foreseeable incorrect ones, so that the installation, maintenance and use of
the Autec Radio Remote Control, and all its components, are performed only and entirely
in compliance with this Manual and in accordance with all local regulations, safety
standards and regulations (referred to herein as "Laws, Regulations and Standards").
With reference to the USA market the Laws, Regulations and Standards include all safety
rules and regulations of the Occupational Safety & Health Administration (OSHA) (http://
www.osha.gov), all federal, state and local laws, regulations and building and electrical
codes, and all applicable standards, including but not limited to ANSI Standards.
AUTEC
LIUACFH01_eng-00
It is also the responsibility of the Manufacturer and of the design professionals of
the Machine on which the Autec Radio Remote Control is to be installed and used to
be certain that the structure, condition, organization and markings of the Machine as
installed at the facility is appropriate for and will allow for the safe and reliable use and
control of the Machine through the Autec Radio Remote Control interface.
IT IS THE RESPONSIBILITY OF THE OWNER AND FACILITY OPERATOR, AND THEIR
DESIGN PROFESSIONALS, that the installation, maintenance and operation of the Autec
Radio Remote Control and all of its components are done solely and completely in
accordance with this Manual, and with all applicable Laws, Regulations and Standards,
even local. It is also the responsibility of the Manufacturer of the Machine on which the
Autec Radio Remote Control is to be installed and used, and their design professionals,
to be certain that the structure, condition, organization and markings of the Machine
as installed at the facility is appropriate for and will allow for the safe and reliable use
and control of the Machine through the Autec Radio Remote Control interface.
ONLY QUALIFIED AND PROPERLY TRAINED PERSONNEL SHOULD BE PERMITTED
TO OPERATE OR USE THE AUTEC RADIO REMOTE CONTROL AND THE MACHINE
OPERATED BY OR THROUGH THE AUTEC RADIO REMOTE CONTROL. ONLY QUALIFIED
AND PROPERLY TRAINED PERSONNEL SHOULD BE PERMITTED TO BE IN THE VICINITY
OF MACHINE OPERATED BY OR THROUGH THE AUTEC RADIO REMOTE CONTROL.
FAILURE TO PROPERLY INSTALL, OPERATE, MAINTAIN AND SERVICE THE AUTEC
RADIO REMOTE CONTROL CAN RESULT IN SERIOUS BODILY INJURY OR DEATH
AND/OR PROPERTY DAMAGE. Refer to this Manual and each of its Parts for further
assistance or contact Autec. Autec is not responsible for and shall not be held liable
for any installation of the Autec Radio Remote Control not performed by Autec or for
any use of the Autec Radio Remote Control not in complete compliance with, and/or
not maintained in complete compliance with, all Autec instructions and warnings and
all applicable Laws, Regulations and Standards, even local.
Autec is not responsible for and shall not be held liable for any alteration or modification
of the Autec Radio Remote Control, or the use of non-Autec components or products
used with or incorporated into the Autec Radio Remote Control.
IT IS THE RESPONSIBILITY OF THE OWNER AND FACILITY OPERATOR, AND THEIR
DESIGN PROFESSIONALS, to be certain that the Autec Radio Remote Control is
properly maintained and serviced at all times in compliance with all Autec instructions
and warnings, and with all applicable Laws, Regulations and Standards, even local.
LIUACFH01_eng-00
AUTEC
IT IS THE RESPONSIBILITY OF THE OWNER AND FACILITY OPERATOR, AND THEIR
OFFICERS, MANAGERS AND SUPERVISORS, to be certain that all Users of the Autec
Radio Remote Control and that all Persons who are or will be working with or near
the Machine operated by or through the Autec Radio Remote Control are fully and
properly educated and trained by qualified Personnel in the proper and safe use of
the Autec Radio Remote Control and of the Machine, including without limitation
complete familiarity with and understanding of Autec warnings and instructions, and
all applicable Laws, Regulations and Standards, even local, and that such Users and
other Persons do in fact at all times operate or work with the Autec Radio Remote
Control safely and ONLY in compliance with Autec instructions and warnings and
with all applicable Laws, Regulations and Standards, even local. FAILURE TO DO SO
CAN RESULT IN SERIOUS BODILY INJURY OR DEATH AND/OR PROPERTY DAMAGE.
IT IS THE RESPONSIBILITY OF THE OWNER AND FACILITY OPERATOR, AND THEIR
OFFICERS, MANAGERS AND SUPERVISORS, to be certain that the areas in which
the Machine operated by or through the Autec Radio Remote Control is located and
operates are clearly delineated and marked in accordance with all Autec warnings
and instructions, and all applicable Laws, Regulations and Standards, even local, and
otherwise sufficient to alert and warn ALL PERSONS that the Machine is operated by
or through a Radio Remote Control, and prohibiting any unauthorized access thereto.
FAILURE TO DO SO CAN RESULT IN SERIOUS BODILY INJURY OR DEATH AND/OR
PROPERTY DAMAGE.
FAILURE TO OPERATE THE AUTEC RADIO REMOTE CONTROL SAFELY AND IN
COMPLIANCE WITH AUTEC INSTRUCTIONS AND WARNINGS AND WITH APPLICABLE
LAWS, REGULATIONS AND STANDARDS, EVEN LOCAL, AND/OR PERMITTING USERS
OR OTHER PERSONS NOT PROPERLY TRAINED IN THE SAFE AND PROPER USE
OF THE SYSTEM, OR THE MACHINE ON WHICH IT IS INSTALLED, CAN RESULT IN
SERIOUS BODILY INJURY OR DEATH AND/OR PROPERTY DAMAGE.
AUTEC
LIUACFH01_eng-00
INDEX
Information on the use of instructions ................................................................. 7
1.1 Structure of the Instruction Manual ................................................................. 7
1.2 Caption and terminology ................................................................................. 9
1.3 Symbols ......................................................................................................... 9
1.4 To whom the instructions are addressed ...................................................... 10
1.5 Instruction storage ........................................................................................ 10
1.6 Intellectual property ...................................................................................... 10
Brief product presentation .................................................................................. 11
2.1 Series, Radio Remote Control and Unit ........................................................ 11
2.2 Contacts and useful addresses ..................................................................... 11
2.3 Warranty ...................................................................................................... 11
2.4 Technical assistance and spare parts ........................................................... 11
Conformity ............................................................................................................ 12
3.1 EC conformity ............................................................................................... 12
3.2 FCC/IC conformity ........................................................................................ 12
Frequencies .......................................................................................................... 15
4.1 863-870MHz frequency band ........................................................................ 15
4.2 Frequency band 915-928MHz ...................................................................... 16
LIUACFH01_eng-00
AUTEC
Information on the use of instructions
Information on the use of instructions
Before reading this part of the Manual, you must read and understand the general
part (Part A) of the Manual provided with the Radio Remote Control.
1.1
Structure of the Instruction Manual
The Manual for the use and maintenance of Autec Air series Radio Remote Controls consists of
different parts, that altogether form the Manual; the Manual must be read carefully, understood
and applied by the Radio Remote Control's Owner, User and by all those Persons that, for any
reasons, may operate with the Radio Remote Control or with the Machine where it is installed.
The following table describes the structure of the Instruction Manual for the use and the
maintenance of the Radio Remote Control.
Part
Title
Contents
General part
- General information regarding the series,
- directions for risk assessment of the "Machine+Radio Remote Control"
system,
- warnings for installation of the Radio Remote Control,
- warnings for use and maintenance of the Radio Remote Control,
- instructions for correct transportation and storage of Radio Remote
Control.
Conformity
and
frequencies
- Operating frequency bands of the Radio Remote Control,
- conformity and law references of the Radio Remote Control.
Transmitting
Unit
Description and instructions concerning the Transmitting Unit, including:
- description of operation,
- commands,
- light signals,
- malfunctions,
- additional instructions to the general part.
Receiving
Unit
Description and instructions concerning the Receiving Unit, including:
- description of operation,
- light signals,
- malfunctions,
- additional instructions to the general part.
Battery
and Battery
Charger
Description, warnings and instructions concerning batteries and Battery
Chargers, including:
- description of operation,
- light signals,
- malfunctions,
- instructions for the User.
AUTEC - AIR SERIES
LIUACFH01_eng-00
8
Information on the use of instructions
Usage and maintenance instructions are supplemented by the Radio Remote Control's
Technical Data Sheet, that:
-- describes the Transmitting Unit's configuration,
-- indicates the relation between commands sent by the Transmitting Unit and those available
on the Receiving Unit.
Usage and maintenance instruction as a whole are to be considered as an integral part both
of the Autec Radio Remote Control and of the Machine, system, device or Machinery system
where the Radio Remote Control is installed.
The Manufacturer of the Machine on which the Autec Radio Remote Control is installed, and
the Owner and User of the Machine, must make sure that the Instruction Manual and all of
its parts are included in the Instruction Manual of the Machine.
The CD attached to each Instruction Manual includes the translations of the Manual.
Act as follows to identify the single Manual parts in the relevant language in the CD:
-- identify the correct section depending on the Radio Remote Control serial number,
-- choose the desired language,
-- select the single parts of the Manual: refer to the code name provided on the cover of
each part.
XXXXXXXXX_language-XX
Instruction Manual for the use and the
maintenance of the Radio Remote Control
Original instructions
XXXXXXXXX_language-XX
Part X: XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XX SERIES
LIUACFH01_eng-00
AUTEC - AIR SERIES
Information on the use of instructions
1.2
Caption and terminology
Contact Autec if any of the instructions, symbols, warnings or images are not
clear and understandable, or if you have doubts or questions.
In this part of the Manual, the terms listed below have the same meaning explained in the
corresponding paragraph of the general part (Part A):
-- Unit
-- Radio Remote Control
-- Transmitting Unit
-- Receiving Unit
-- Machine
-- Manufacturer
-- Installer
-- User
-- Maintenance Technician
-- Manual or Instruction Manual
-- Installation Manual
-- Person
-- Owner
Functions indicated for the Manufacturer, the Installer, the User and the Maintenance
Technician may be performed by a single Person, if he/she has the needed competence
and undertakes the resulting responsibilities. Each Person must be aware of the instructions
contained in the Manual, depending on the activity they carry out.
For example, if a Manufacturer is also the Installer, and/or Maintenance Technician, he must
also know and follow the instructions specifically addressed to those Persons. The same
applies, for example, if a User is also the Manufacturer and/or the Installer.
1.3
Symbols
This symbol identifies the parts of text in the Manual that must be read with
special attention.
This symbol identifies the parts of text in the Manual containing warnings,
information and/or instructions that are particularly relevant with regards
to safety; failure in understanding them may cause hazards for People and/
or property.
AUTEC - AIR SERIES
LIUACFH01_eng-00
10
1.4
Information on the use of instructions
To whom the instructions are addressed
Addressees of instructions are listed in the paragraph with the same title in the general part:
please refer to that part.
1.5
Instruction storage
Regulation for the storage of instructions are described in the paragraph with the same title
in the general part: please refer to that part.
1.6
Intellectual property
Restrictions connected to intellectual property are described in the paragraph with the same
title in the general part: please refer to that part.
LIUACFH01_eng-00
AUTEC - AIR SERIES
Brief product presentation
Brief product presentation
2.1
Series, Radio Remote Control and Unit
11
This part of the Manual describes:
-- the Air series' Radio Remote Control compliance with the standards, the requirements
and conditions of use in each Country and
-- the different frequency bands, in which the Radio Remote Control is able to operate.
Autec Air series' Radio Remote Controls are designed to be used on Machines and provide
a command interface to their command and control system, to be used from an appropriate
distance and position.
2.2
Contacts and useful addresses
The Radio Remote Controls are produced by Autec srl – Via Pomaroli, 65 – 36030 Caldogno
(VI) – ITALY.
You can find contacts for Autec, its distributors, dealers and authorized service centres on
the website www.autecsafety.com.
2.3
Warranty
General warranty conditions are indicated both in the relevant sheet provided together with
this documentation, and in the specific page on the website www.autecsafety.com.
2.4
Technical assistance and spare parts
If you need technical services and/or spare parts, please refer to contacts provided in the
website www.autecsafety.com.
When applying for technical service to Autec, its distributors, dealers and authorized service
centres, the Radio Remote Control's serial number is required; you can find it on the
identification plate on the Transmitting Unit and/or on the Receiving Unit.
AUTEC - AIR SERIES
LIUACFH01_eng-00
12
Conformity
Conformity
Addressees of instructions must:
-- make sure that the Radio Remote Control works within the frequency band permitted in
the country where it is used;
-- make sure that the Radio Remote Control works correctly, in compliance with the applicable
standards in the relevant country;
-- not modify the Radio Remote Control conformity, by performing modifications or technical
operations that change its operation.
During training on or usage of Autec Radio Remote Controls, local provisions imposing the
conservation of product conformity with local standards must be respected, as well as specific
standards related to safety in the use of Radio Remote Controls or electrical devices, both
in the working environment or outside of it.
3.1
EC conformity
3.2
FCC/IC conformity
According to the regulations in force in the European Union, one of
the requirements for a Radio Remote Control to be compliant with
the EC conformity is to work at one of the permitted frequencies. If it
does not, the Radio Remote Control cannot be considered compliant.
Each Air series' Radio Remote Control working in the frequency
band 863-870MHz complies with the (RED) Directive 2014/53/EU
and its essential requirements.
Each Radio Remote Control also complies with the harmonised
standards listed in the EU Declaration of Conformity, that are in force
and applicable when the Radio Remote Control is put on the market.
Autec Radio Remote Control's EU Declaration of Conformity is
provided as an attachment with the Radio Remote Control.
An AIR series' Radio Remote Control working in the 915-928MHz frequency band complies
with the requirements of the following standards:
-- FCC (Federal Communication Commission) Part 15
-- IC (Industry Canada) RSS-102
The following table lists the approval identification codes for each type of Transmitting Unit
and for each type of Receiving Unit in the Air series.
Unit
FCC ID
IC Number
LK NEO 6/LK NEO 8
Transmitting Unit
Model LKN Type LA1JH
OQA-LKNLA1JH
9061A-LKNLA1JH
LK NEO 10/LK NEO 12
Transmitting Unit
Model LKN Type LA2MH
OQA-LKNLA2MH
9061A-LKNLA2MH
LIUACFH01_eng-00
AUTEC - AIR SERIES
Conformity
a.
b.
c.
d.
13
Unit
FCC ID
IC Number
SK4 Transmitting Unit
Model SK4 Type LA0PH
OQA-SK4LA0PH
9061A-SK4LA0PH
ACRS13-G Receiving Unit
Model RGA Type GC0FH
OQA-AIRRT42FH
9061A-AIRRT42FH
a b c
DCRS13 Receiving Unit
Model RGM Type KC0FH
OQA-AIRRT42FH
9061A-AIRRT42FH
a b c
ACRS13-L Receiving Unit
Model RLB Type HC0FH
OQA-AIRRT42FH
9061A-AIRRT42FH
a b c
ACRM15 Receiving Unit
Model RMC Type EC0FH
OQA-AIRRT42FH
9061A-AIRRT42FH
a b c
DCRM24Receiving Unit
Model RMG Type MC0FH
OQA-AIRRT42FH
9061A-AIRRT42FH
a b c
ACRM5E Receiving Unit
Model RMH Type NC0FH
OQA-AIRRT42FH
9061A-AIRRT42FH
a b c
MVRCAN Receiving Unit
Model RNF Type LC0FH
OQA-AIRRT42FH
9061A-AIRRT42FH
a b c
MVRL9E Receiving Unit
Model RRL Type PC0FH
OQA-AIRRT42FH
9061A-AIRRT42FH
a b c
MVRDIN Receiving Unit
Model RSN Type QC0FH
OQA-AIRRT42FH
9061A-AIRRT42FH
a b c
ACRDIN Receiving Unit
Model RSP Type RC0FH
OQA-AIRRT42FH
9061A-AIRRT42FH
a b c
Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary
for successful communication.
This radio transmitter has been approved by Industry Canada to operate with the antenna types
listed below with the maximum permissible gain and required antenna impedance for each antenna
type indicated. Antenna types not included in this list, having a gain greater than the maximum
gain indicated for that type, are strictly prohibited for use with this device.
Antenna type
Antenna gain
Antenna impedance
Autec stylus λ/4
<0dBi
50 Ohm
Autec allows you to use only the dedicated antenna supplied either with the remote control or
as original spare part. The use of any other type of antenna is prohibited and will invalidate the
warranty.
Place the antenna of the Receiving Unit in a position that ensures a minimum separation distance
of 20cm from all the people that can be in the working area.
AUTEC - AIR SERIES
LIUACFH01_eng-00
14
Conformity
Read carefully the section of the Manual where the antenna position is described,
both in the general part and in the specific part referring to the Receiving Unit.
3.2.1 Federal Communications Commission (FCC)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the User’s authority to operate the equipment.
3.2.2 Industry Canada (IC)
This device complies with Industry Canada's licence-exempt RSSs.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
LIUACFH01_eng-00
AUTEC - AIR SERIES
Frequencies
15
Frequencies
Air series' Radio Remote Controls can work in two different frequency bands: 863-870MHz
or 915-928MHz.
The Radio Remote Controls' working frequency is defined by market-specific laws
and standards. In order for the system “Machine+Radio Remote Control” to be
compliant and therefore to be used, these laws and standards must be respected:
if they are not, the Radio Remote Control cannot and must not be used.
Autec cannot be held responsible if the Radio Remote Control is set with
frequencies that are forbidden in the country of use.
The Radio Remote Control automatically searches for a free working frequency within the
frequency band where it is working.
4.1
863-870MHz frequency band
4.1.1 Frequencies
The radio link between the Units of Autec Air series Radio Remote Controls is established
at one of the frequencies permitted by the European standards in force when the system is
put on the market.
Frequencies used ......................................................................................................... 128
RF power ....................................................................................................... <25mW ERP
Channel spacing ...................................................................................................... 50kHz
Typical working range .................................................................................... 100m (330ft)
The Units of Autec Air series' Radio Remote Controls:
-- use a working frequency in the 863-870MHz band,
-- check that the frequency is free before using it,
-- continually change the working frequency to maintain the radio link even when interference
occurs.
4.1.2 Countries of usage
Air series' Radio Remote Controls working in the 863-870MHz frequency band can be used
within the EU (European Union) and the EFTA (European Free Trade Association).
Check on the technical data plate of the Units in which markets the Radio Remote Control
can be used.
AUTEC - AIR SERIES
LIUACFH01_eng-00
16
4.2
Frequencies
Frequency band 915-928MHz
4.2.1 Frequencies
The radio link between the Units of Autec Air series Radio remote controls is established at
one of the frequencies permitted by the USA, Canadian and Australian standards in force
when the system is put on the market.
Frequencies used ......................................................................................................... 256
RF power (FCC and IC) .................................................... meets FCC and IC requirements
Channel spacing ...................................................................................................... 50kHz
Typical working range .................................................................................... 100m (330ft)
4.2.2 Countries of usage
Air series' Radio Remote Controls working in the frequency band 915-928MHz can be used
in the US, Canadian and Australian markets.
Check on the technical data plate of the Units in which markets the Radio Remote Control
can be used.
LIUACFH01_eng-00
AUTEC - AIR SERIES
Via Pomaroli, 65 - 36030 Caldogno (VI), ITALY
PH: +39 0444 901000 - Fax: +39 0444 901011
info@autecsafety.com - www.autecsafety.com
MADE IN ITALY
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Language : it-IT Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c143 79.161210, 2017/08/11-10:28:36 Create Date : 2018:07:26 12:21:55+02:00 Metadata Date : 2018:07:26 12:21:56+02:00 Modify Date : 2018:07:26 12:21:56+02:00 Creator Tool : Adobe InDesign CC 13.0 (Windows) Instance ID : uuid:1c4bd685-748c-4e3d-9ef0-993c6f0e6521 Original Document ID : xmp.did:3E97F9BFF011E111AF74C00038EEA0BF Document ID : xmp.id:d07b71a7-2baa-7343-af37-526db3241581 Rendition Class : proof:pdf History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.0 (Windows) History Changed : / History When : 2018:07:26 12:21:55+02:00 Derived From Instance ID : xmp.iid:9aefc7e5-e001-8d49-9e3e-ee8f8712b30d Derived From Document ID : xmp.did:4ad1c5d0-7a99-7849-b84f-6579465b6c28 Derived From Original Document ID: xmp.did:3E97F9BFF011E111AF74C00038EEA0BF Derived From Rendition Class : default Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Layout : SinglePage Page Count : 20 Creator : Adobe InDesign CC 13.0 (Windows)EXIF Metadata provided by EXIF.tools