Autel Intelligent Tech 3017000101 TPMS sensor activator User Manual TS101
Autel Intelligent Tech. Corp., Ltd. TPMS sensor activator TS101
User manual
A universal TPMS
sensor activator
The MaxiTPMS TS101 is a universal TPMS (tire
pressure monitoring system) sensor trigger tool to
activate TPMS sensors to reset or relearn the
sensor ID.
Designed for vehicles with stationary “re-learn
mode” : most GM, Chrysler and Ford and some
Japanese cars, and compatible with all currently
known TPMS sensors, TS101 is an easy-to-use
and affordable tool for every driver!
Stream on and low battery indicators.
Radio stream: 125KHz to activate sensors.
Powered by 9V alkaline battery.
Internet update guarantees future sensor compatibility.
Designed to last in rough environments
Extremely easy to use.
like tire repair shops.
Specifications
Weight:0.166 Kg( battery included)
Dimensions:151.7x49.2x28.5mm(5.97"x1.97"x1.12")
Maxi
Compliance Information
FCC COMPLIANCE FCC ID: WQ83017000101
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry
Canada. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: ⅰ. Reorient or relocate the
receiving antenna. ⅱ. Increase the separation between the equipment and receiver.
ⅲ. Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. ⅳ. Consult the dealer or an experienced radio/TV
technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction。
The term “IC” before the radio certification number only signifies that IC technical
specifications were met.
RoHS COMPLIANCE
This device is declared to be in compliance with the European RoHS Directive
2011/65/EU.
CE COMPLIANCE
This product is declared to conform to the essential requirements of the following
Directives and carries the CE mark accordingly: EMC Directive 2004/108/EC
R&TTE Directive 1999/5/EC Low Voltage Directive
2006/95/EC