Autel Intelligent Tech MAXISYSELITE AUTOMOTIVE DIAGNOSTIC & ANALYSIS SYSTEM User Manual

Autel Intelligent Tech. Corp., Ltd. AUTOMOTIVE DIAGNOSTIC & ANALYSIS SYSTEM

User manual

Trademarks Autel®, MaxiSysTM, MaxiDAS®, MaxiScan®, MaxiTPMS®, MaxiVideoTM, MaxiRecorderTM, and MaxiCheckTM are trademarks of Autel Intelligent Technology Corp., Ltd., registered in China, the United States and other countries. All other marks are trademarks or registered trademarks of their respective holders. Copyright Information No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Autel. Disclaimer of Warranties and Limitation of Liabilities All information, specifications and illustrations in this manual are based on the latest information available at the time of printing. Autel reserves the right to make changes at any time without notice. While information of this manual has been carefully checked for accuracy, no guarantee is given to the completeness and correctness of the contents, including but not limited to the product specifications, functions, and illustrations. Autel will not be liable for any direct damages or for any special, incidental, or indirect damages or for any economic consequential damages (including lost profits). IMPORTANT: Before operating or maintaining this unit, please read this manual carefully, paying extra attention to the safety warnings and precautions. For Services and Support: http://pro.autel.com www.autel.com 1-855-288-3587/1-855-AUTELUS (North America) 0086-755-86147779 (China) Support@autel.com For technical assistance in all other markets, please contact your local selling agent. i
Safety Information For your own safety and the safety of others, and to prevent damage to the device and vehicles upon which it is used, it is important that the safety instructions herein presented throughout this manual be read and understood by all persons operating, or coming into contact with, the device. There are various procedures, techniques, tools, and parts for servicing vehicles, as well as in the skill of the person doing the work. Because of the vast number of test applications and variations in the products that can be tested with this equipment, we cannot possibly anticipate or provide advice or safety messages to cover every circumstance. It is the automotive technician’s responsibility to be knowledgeable of the system being tested. It is crucial to use proper service methods and test procedures. It is essential to perform tests in an appropriate and acceptable manner that does not endanger your safety, the safety of others in the work area, the device being used, or the vehicle being tested. Before using the device, always refer to and follow the safety messages and applicable test procedures provided by the manufacturer of the vehicle or equipment being tested. Use the device only as described in this manual. Read, understand, and follow all safety messages and instructions in this manual. Safety Messages Safety messages are provided to help prevent personal injury and equipment damage. All safety messages are introduced by a signal word indicating the hazard level. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders. Safety Instructions The safety messages herein cover situations Autel is aware of. Autel cannot know, evaluate or advise you as to all of the possible hazards. You must be certain that any condition or service procedure encountered do not jeopardize your personal safety. DANGER: When an engine is operating, keep the service area WELL VENTILATED or attach a building exhaust removal system to the engine exhaust system. Engines produce carbon monoxide, an odorless, poisonous gas that causes slower reaction time and can lead to serious personal injury or loss of life. ii
Safety Information Important Safety Instructions Do Not Turn the Volume Up Too Loud When Using Headphones Listening at high volumes that over-stimulate the ear for long periods of time may result in loss of hearing. SAFETY WARNINGS:  Always perform automotive testing in a safe environment.  Wear safety eye protection that meets ANSI standards.  Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.  Operate the vehicle in a well ventilated work area, for exhaust gases are poisonous.  Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission) and make sure the parking brake is engaged.  Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.  Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running.  Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.  Do not connect or disconnect any test equipment while the ignition is on or the engine is running.  Keep the test equipment dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to clean the outside of the equipment as necessary.  Do not drive the vehicle and operate the test equipment at the same time. Any distraction may cause an accident.  Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions. Failure to do so may result in personal injury or damage to the test equipment.  To avoid damaging the test equipment or generating false data, make sure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure.  Do not place the test equipment on the distributor of the vehicle. Strong electro-magnetic interference can damage the equipment. iii
Contents SAFETY INFORMATION .......................................................................................... II CHAPTER 1 USING THIS MANUAL ..................................................................... 1 1.1 CONVENTIONS .................................................................................................... 1 1.1.1 Bold Text .................................................................................................. 1 1.1.2 Terminology ............................................................................................ 1 1.1.3 Notes and Important Messages .............................................................. 1 1.1.4 Hyperlinks ................................................................................................ 1 1.1.5 Procedures ............................................................................................... 2 CHAPTER 2 GENERAL INTRODUCTION .............................................................. 3 2.1 MAXISYS DISPLAY TABLET ..................................................................................... 3 2.1.1 Functional Description ............................................................................. 3 2.1.2 Power Sources ......................................................................................... 5 2.1.3 Technical Specifications ........................................................................... 5 2.2 VCI – J2534 ECU PROGRAMMING DEVICE ............................................................. 7 2.2.1 Functional Description ............................................................................. 7 2.2.2 Power Sources ......................................................................................... 8 2.2.3 Technical Specifications ........................................................................... 9 2.3 DOCKING STATION ............................................................................................... 9 2.3.1 Functional Description ............................................................................. 9 2.3.2 Technical Specifications ......................................................................... 10 2.4 ACCESSORY KIT ................................................................................................. 10 2.4.1 Main Cable ............................................................................................ 10 2.4.2 OBD I Adapters ...................................................................................... 11 2.4.3 Other Accessories .................................................................................. 11 CHAPTER 3 GETTING STARTED........................................................................ 13 3.1 POWERING UP .................................................................................................. 13 3.1.1 Application Buttons ............................................................................... 14 3.1.2 Locator and Navigation Buttons ............................................................ 15 3.1.3 System Status Icons ............................................................................... 16 3.2 POWERING DOWN ............................................................................................ 16 3.2.1 Reboot System ....................................................................................... 17 3.3 INSTALLING COMPUTER SOFTWARE ....................................................................... 17 3.3.1 Printing Operation ................................................................................. 17 CHAPTER 4 DIAGNOSTICS OPERATIONS .......................................................... 19
4.1 ESTABLISHING VEHICLE COMMUNICATION .............................................................. 19 4.1.1 Vehicle Connection ................................................................................ 19 4.1.2 VCI Connection ...................................................................................... 21 4.1.3 No Communication Message ................................................................ 24 4.2 GETTING STARTE D ............................................................................................. 25 4.2.1 Vehicle Menu Layout ............................................................................. 25 4.3 VEHICLE IDENTIFICATION ..................................................................................... 27 4.3.1 Auto VIN Scan ........................................................................................ 27 4.3.2 Manual VIN Input .................................................................................. 28 4.3.3 Manual Vehicle Selection ...................................................................... 29 4.3.4 Alternative Vehicle Identification .......................................................... 32 4.4 NAVIGATION ..................................................................................................... 32 4.4.1 Diagnostics Screen Layout ..................................................................... 32 4.4.2 Screen Messages ................................................................................... 35 4.4.3 Making Selections ................................................................................. 36 4.5 MAIN MENU .................................................................................................... 36 4.6 DIAGNOSIS ....................................................................................................... 37 4.6.1 ECU Information .................................................................................... 41 4.6.2 Read Codes ............................................................................................ 42 4.6.3 Erase Codes ........................................................................................... 43 4.6.4 Live Data ................................................................................................ 43 4.6.5 Active Test ............................................................................................. 50 4.6.6 Special Functions ................................................................................... 51 4.7 SERVICE ........................................................................................................... 52 4.7.1 Function Descriptions ............................................................................ 52 4.8 PROGRAMMING AND CODING .............................................................................. 53 4.9 GENERIC OBD II OPERATIONS ............................................................................. 57 4.9.1 General Procedure ................................................................................. 57 4.9.2 Function Descriptions ............................................................................ 59 4.10 EXITING DIAGNOSTICS .................................................................................... 62 CHAPTER 5 DATA MANAGER OPERATIONS ...................................................... 63 5.1 OPERATIONS..................................................................................................... 63 5.1.1 Image Files ............................................................................................ 63 5.1.2 PDF Files ................................................................................................ 65 5.1.3 Review Data .......................................................................................... 66 5.1.4 Apps Manager ....................................................................................... 66 5.1.5 Data Logging ......................................................................................... 67 CHAPTER 6 MAXIFIX OPERATIONS .................................................................. 68 6.1 NAVIGATION ..................................................................................................... 68
6.1.1 Terminology ........................................................................................... 70 6.2 OPERATIONS..................................................................................................... 71 6.2.1 Home ..................................................................................................... 71 6.2.2 My MaxiFix ............................................................................................ 73 6.2.3 Search Fix .............................................................................................. 75 6.2.4 All Questions.......................................................................................... 76 6.2.5 My Messages......................................................................................... 76 6.2.6 Support .................................................................................................. 77 CHAPTER 7 SETTINGS OPERATIONS ................................................................ 78 7.1 OPERATIONS..................................................................................................... 78 7.1.1 Unit ........................................................................................................ 78 7.1.2 Language ............................................................................................... 79 7.1.3 Printing Setting ...................................................................................... 79 7.1.4 Wired Network ...................................................................................... 79 7.1.5 Notification Center ................................................................................ 80 7.1.6 Multitask ............................................................................................... 81 7.1.7 About ..................................................................................................... 81 7.1.8 System Settings ..................................................................................... 82 CHAPTER 8 SHOP MANAGER OPERATIONS ..................................................... 83 8.1 VEHICLE HISTORY .............................................................................................. 84 8.1.1 Historical Test Record ............................................................................ 85 8.2 WORKSHOP INFORMATION .................................................................................. 86 8.3 CUSTOMER MANAGER ....................................................................................... 87 8.3.1 History Notes ......................................................................................... 89 CHAPTER 9 UPDATE OPERATIONS ................................................................... 91 CHAPTER 10 VCI MANAGER OPERATIONS ......................................................... 93 10.1 BLUETOOTH PAIRING ...................................................................................... 94 10.2 WIRED NETWORK CONNECTION ....................................................................... 95 10.3 UPDATE ....................................................................................................... 96 CHAPTER 11 REMOTE DESK OPERATIONS ......................................................... 97 11.1 OPERATIONS ................................................................................................. 97 CHAPTER 12 SUPPORT OPERATIONS ................................................................ 99 12.1 PRODUCT REGISTRATION ................................................................................. 99 12.2 SUPPORT SCREEN LAYOUT ............................................................................. 100 12.3 MY ACCOUNT ............................................................................................. 101
12.4 USER COMPLAINT ........................................................................................ 101 12.5 DATA LOGGING ............................................................................................ 104 12.6 COMMUNITIES ............................................................................................ 105 12.7 TRAINING CHANNELS .................................................................................... 107 12.8 FAQ DATABASE ........................................................................................... 108 CHAPTER 13 TRAINING OPERATIONS ............................................................. 109 CHAPTER 14 QUICK LINK OPERATIONS ........................................................... 111 CHAPTER 15 DIGITAL INSPECTION OPERATIONS ............................................. 112 15.1 ADDITIONAL ACCESSORIES ............................................................................. 113 15.2 TECHNICAL SPECIFICATIONS............................................................................ 116 15.3 OPERATIONS ............................................................................................... 116 CHAPTER 16 MAINTENANCE AND SERVICE ..................................................... 119 16.1 MAINTENANCE INSTRUCTIONS........................................................................ 119 16.2 TROUBLESHOOTING CHECKLIST ....................................................................... 120 16.3 ABOUT BATTERY USAGE ................................................................................ 120 16.4 SERVICE PROCEDURES ................................................................................... 121 CHAPTER 17 COMPLIANCE INFORMATION ..................................................... 123 CHAPTER 18 WARRANTY ............................................................................... 124
Chapter 1 Using This Manual This manual contains device usage instructions. Some illustrations shown in this manual may contain modules and optional equipment that are not included on your system. Contact your sales representative for availability of other modules and optional tools or accessories. 1.1 Conventions The following conventions are used. 1.1.1 Bold Text Bold emphasis is used to highlight selectable items such as buttons and menu options. Example:  Tap OK. 1.1.2 Terminology The term “select” means highlighting a button or menu item and tapping it to confirm the selection. 1.1.3 Notes and Important Messages The following messages are used. Notes A NOTE provides helpful information such as additional explanations, tips, and comments. Important IMPORTANT indicates a situation which, if not avoided, may result in damage to the test equipment or vehicle. 1.1.4 Hyperlinks Hyperlinks, or links, that take you to other related articles, procedures, and illustrations are available in electronic documents. Blue colored text indicates a selectable hyperlink. 1
Using This Manual Conventions 1.1.5 Procedures An arrow icon indicates a procedure. Example:  To use the camera: 1 Tap the Camera button. The camera screen opens. 2 Focus the image to be captured in the view finder. 3 Tap the blue circle. The view finder now shows the captured picture and auto-saves the taken photo. 2
Chapter 2 General Introduction The MaxiSysTM Elite Diagnostic Platform is the next generation of smart solution for specialized automotive diagnosis. Featuring the NVIDIA’s Tegra® 4-PLUS-1 quad-core 1.90GHz processor, a 9.7” Retina display with a super sensitive capacitive screen supporting air gesture control, combined with an optimized array of powerful applications, and the best possible coverage of OE-level diagnostics, the MaxiSys Elite performs every job from comprehensive vehicle diagnostics & analysis to advanced ECU programming quickly and efficiently. There are 3 main components to the MaxiSys Elite system:  MaxiSys Display Tablet – the central processor and monitor for the system  Vehicle Communication Interface (VCI) – the J2534 ECU Programming Device for accessing vehicle data with programming capabilities  Docking Station – provides optimum visibility and convenient charging This manual describes the construction and operation of these devices and how they work together to deliver diagnostic solutions. 2.1 MaxiSys Display Tablet 2.1.1 Functional Description Figure 2-1 MaxiSys Display Tablet Front View 1. 9.7” Retina display with capacitive touch screen 2. Microphone 3
General Introduction MaxiSys Display Tablet 3. LED Breath Light – indicates battery level & charging status 4. Front Camera 5. Ambient Light Sensor – detects ambient brightness Figure 2-2 MaxiSys Display Tablet Top View 6. Ethernet Port 7. USB Port – for VCI connection 8. HDMI Port 9. Mini USB OTG Port 10. Head Phone Jack 11. DC Power Supply Input Port 12. Lock/Power Button – turns the device on & off with long press, or locks the screen with short press Figure 2-3 MaxiSys Display Tablet Back View 13. Collapsible Stand – extends from the back to allow hands-free viewing of the display tablet at a 30-degree angle 14. Removable Battery 15. SIM Card Slot – optional module 16. Camera Lens 17. Camera Flash 4
General Introduction MaxiSys Display Tablet 2.1.2 Power Sources The MaxiSys Elite can receive power from any of the following sources:  Rechargeable Battery Pack  AC/DC Power Supply – using power adapter or docking station  Vehicle Power Rechargeable Battery Pack The display tablet can be powered with the rechargeable battery, which if fully charged can provide sufficient power for about 6.5 hours of continuous operation. AC/DC Power Supply The display tablet can be powered from a wall socket using the AC/DC power adapter or the docking station. The AC/DC power supply also charges the battery pack. Vehicle Power The display tablet can be powered from the cigarette lighter or other suitable power port on the test vehicle through a direct cable connection. The vehicle power cable connects to the DC power supply port on the top side of the display unit. 2.1.3 Technical Specifications Item Description Operating System Android 4.3 Jelly Bean Processor NVIDIA Tegra® 4 (4-PLUS-1 Quad-core Processor) 1.8GHz with ARM Cortex – A15 CPU Memory 2GB RAM & 32GB Embedded Memory Display 9.7” Retina display with 2048X1536 resolution & Capacitive touch screen 5
General Introduction MaxiSys Display Tablet Item Description Connectivity  802.11a/b/g/n/ac WIFI  Version 2.1 3Mbs Bluetooth  RJ45 Ethernet Connection  3.0 USB (2.0 Compatible)  HDMI 1.4a  SD Card (Support up to 32GB)  4G Mobile Network (Optional) Camera Rear: 8.0 Megapixel, Autofocus with Flashlight Front: 2.0 Megapixel Sensors Ambient Light Sensor, G-sensor, Air Gesture Sensing Audio Input/Output  Microphone  Dual Speakers  3-Band 3.5 mm stereo/standard headset jack Power and Battery  3.7V/13600mAH Lithium-polymer battery  DC/12V/3A Power Supply Input Voltage DC/12V/3A Power Consumption Max 20W Operating Temperature -10 to +55°C Storage Temperature -20 to +70°C Dimensions (W x H x D) 309 X 225 X 35 (mm) Weight 1.59 kg Protocols ISO 9142-2, ISO 14230-2, ISO 15765-4, K/L lins, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, CAN ISO 11898, Highspeed, Middlespeed, Lowspeed and Singlewire CAN, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP 2.0, TP 1.6, SAE J1939, SAE J1708, Fault-Tolerant CAN 6
General Introduction VCI – J2534 ECU Programming Device 2.2 VCI – J2534 ECU Programming Device 2.2.1 Functional Description Figure 2-4 J2534 ECU Programming Device 1. Ethernet Port 2. USB Port 3. Power LED - illuminates solid green when powered on 4. Error LED - illuminates solid red when serious hardware failure occurs 5. Bluetooth LED - illuminates solid green when connected with the MaxiSys display tablet through Bluetooth communication 6. Ethernet LED - illuminates solid green when connected with the MaxiSys display tablet or an existing LAN via the Ethernet serial cable 7. USB Status Light - illuminates solid green when the device is properly connected and communicating with the MaxiSys display tablet or the PC via the USB cable 8. Vehicle LED - flashes green when communicating with the vehicle’s network IMPORTANT: Do not disconnect the reprogramming device while this status light is on! If the flash reprogramming procedure is interrupted while the vehicle’s ECU is blank or only partially programmed, the module may be unrecoverable. 9. Bluetooth Antenna 10. DC Power Supply Input Port 7
General Introduction VCI – J2534 ECU Programming Device 11. Vehicle Data Connector (DB26-Pin MVCI) 12. External Programming Voltage Output Port 13. A/D Input Port J2534 Reprogramming Capability The J2534 ECU Programming Device is a SAE J2534-1 & -2 compliant PassThru reprogramming interface device. Using the updated OEM software, it is capable of replacing the existing software/firmware in the Electronic Control Units (ECU), programming new ECUs and fixing software-controlled drivability issues and emission issues. Communication The J2534 ECU programming device supports Bluetooth, Ethernet and USB communication. It can transmit vehicle data to the MaxiSys display tablet with or without a physical connection. The working range of the transmitter through Bluetooth communication is 755 feet (about 230 m). A signal lost due to moving out of range automatically restores itself when the display tablet unit is brought closer to the VCI unit. 2.2.2 Power Sources The J2534 programming device can receive power from both of the following sources:  Vehicle Power  AC/DC Power Supply Vehicle Power The J2534 programming device operates on 12-volt vehicle power, which it receives through the vehicle data connection port. The device powers on whenever it is connected to an OBD II/EOBD compliant data link connector (DLC). For non OBD II/EOBD compliant vehicles, the device can be powered from a cigarette lighter or other suitable power port on the test vehicle using the auxiliary power cable. AC/DC Power Supply The J2534 programming device can be powered from a wall socket using the AC/DC power adapter.8
General Introduction Docking Station 2.2.3 Technical Specifications Item Description Communications  Ethernet: RJ45 Ethernet connection  Bluetooth  USB 2.0 Input Voltage Range 6 VDC to 26 VDC Supply Current 300 mA @ 6 VDC 200 mA @ 12 VDC 110 mA @ 24 VDC Operating Temperature 0°C to +60°C (ambient) Storage Temperature -65°C to +100°C (ambient) Dimensions (L x W x H) 183.8 x 135.5 x 41 (mm) Weight 0.54 kg (1.20 lb) NOTE: For additional please refer to the accompanied user manual for the J2534 ECU Programming Device. 2.3 Docking Station 2.3.1 Functional Description Figure 2-5 Docking Station 9
General Introduction Accessory Kit 1. DC Power Supply Input Port – connects to the AC/DC adapter for power supply 2. Charging Dock – holds the MaxiSys tablet while providing optimum visibility and convenient charging NOTE: Please make sure no small metal or other conductive parts are around the Charging Dock to avoid short circuit damage to the device. 2.3.2 Technical Specifications Item Description Input Voltage DC/12V/3A Operating Temperature -10°C to +55°C (ambient) Storage Temperature -40°C to +85°C (ambient) Dimensions (L x W x H) 326.5 x 128.5 x 49 (mm) Weight 0.79 kg (1.74lb) 2.4 Accessory Kit 2.4.1 Main Cable The VCI device can be powered through the Main Cable when connected to an OBD II/EOBD compliant vehicle. The Main Cable connects the VCI device to the vehicle’s data link connector (DLC), through which the VCI device can transmit vehicle data to the MaxiSys display tablet. Figure 2-6 Main Cable – 1.5 m in length 10
General Introduction Accessory Kit 2.4.2 OBD I Adapters The OBD I adapters are for Non-OBD II vehicles. The adapter used depends on the type of vehicle make being tested. The most common adapters are shown below. VW/Audi-2+2 Chrysler-16 BMW-20 Kia-20 Nissan-14 GM/Daewoo-12 Honda-3 Fiat-3 PSA-2 Benz-38 Mitsubishi/Hyundai-12+16 2.4.3 Other Accessories Standard 2.0 USB Cable Connects the display tablet to the VCI unit. Mini USB Cable Connects the display tablet to the PC. AC/DC External Power Adapter Connects the display tablet to the external DC power port for power supply. 11
General Introduction Accessory Kit Compact Disc (CD) Includes the User Manual, Printing Services Program and Update Application, etc. Ethernet Serial Cable Connects the display tablet to the VCI unit. Cigarette Lighter Provides power to the display tablet or the J2534 programming device through connection to the vehicle’s cigarette lighter receptacle, as some non-OBD II vehicles cannot provide power via the DLC connection. Clipper Cable Provides power to the display tablet or the J2534 programming device, through connection to the vehicle’s battery. Lighter Fuse A safety device for the cigarette lighter. Screwdriver Unscrews the rear cover of the display tablet for easy replacement of the battery or Mini SD card. 12
Chapter 3 Getting Started Make sure the MaxiSys Display Tablet has a charged battery or is connected to the DC power supply (see 2.1.2 Power Sources on page 5). 3.1 Powering Up Press the Lock/Power button on the top right side of the display tablet to switch the unit on. The system boots up, and shows the lock screen. Press and drag the inner ring to the edge of the circle to unlock the screen; the MaxiSys Job Menu is shown. Figure 3-1 Sample MaxiSys Job Menu 1. Application Buttons 2. Locator and Navigation Buttons 3. Status Icons NOTE: The screen is locked by default when you first turn on the display tablet. It is recommended to lock the screen to protect information in the system and reduce battery usage. Almost all operations on the display tablet are controlled through the touch screen. The touch screen navigation is menu driven, which allows you to quickly locate the test procedure, or data that you need, through a series of choices and questions. Detailed descriptions of the menu structures are found in the chapters for the various applications. 13
Getting Started Powering Up 3.1.1 Application Buttons The Application buttons configure the MaxiSys for the type of operation or activity to be performed. The table below gives brief descriptions of the available applications. Use the stylus pen or your finger tip to select an application from the Job Menu. Table 3-1 Applications Name Button Description Diagnostics Configures the unit to operate as a diagnostic tool. See Diagnostics Operations on page 19. Data Manager Opens the organization system for saved data files. See Data Manager Operations on page 63. MaxiFix Launches the MaxiFix platform which provides the most compatible and abundant repair techniques and diagnostics database. See MaxiFix Operations on page 68. Settings Allows you to set the MaxiSys system settings, and to view the general information about the Display Tablet. See Settings Operations on page 78. Shop Manager Allows you to edit and save workshop information and customer data, as well as reviewing test vehicle history records. See Shop Manager Operations on page 83. Update Checks for the latest update available for the MaxiSys system, and performs updating procedures. See Update Operations on page 91. VCI Manager Establishes and manages Bluetooth or wired connections to the VCI device. See VCI Manager Operations on page 93. Remote Desk Configures your unit to receive remote support using the TeamViewer application program. See Remote Desk Operations on page 97. Support Launches the Support platform which synchronizes Autel’s on-line service base station with the MaxiSys tablet. See Support Operations on page 99. 14
Getting Started Powering Up Name Button Description Training Allows you to store and play technical tutorial and training videos about the device usage or vehicle diagnostic techniques. See Training Operations on page 109. Quick Link Provides associated website bookmarks to allow quick access to product update, service, support and other information. See Quick Link Operations on page 111. Digital Inspection Configures the unit to operate as a video scope device by connecting to an Imager head cable for close vehicle inspections. See Digital Inspection Operations on page 112. 3.1.2 Locator and Navigation Buttons Operations of the Navigation buttons at the bottom of the screen are described in the table below: Table 3-2 Locator and Navigation Buttons Name Button Description Locator Indicates the location of the screen. Swipe the screen left or right to view the previous or next screen. Back Returns to the previous screen. Home Returns to Android System’s Home screen. Recent Apps Displays a list of applications that are currently working. To open an app, touch it. To remove an app, drag it downwards. Chrome Launches the Chrome browser. Camera Opens the camera with short press; takes and saves screenshot image with long press. The saved files are auto-stored in the Data Manager application for later reviews. See Data Manager Operations on page 63. Display & Sound Allows you to adjust the brightness of the screen and the volume of the audio output. 15
Getting Started Powering Down Name Button Description VCI Opens the VCI Manager application. The tick icon at the bottom right corner indicates the display tablet is communicating with the VCI device, otherwise a cross icon displays. MaxiSys Shortcut Returns to the MaxiSys operation interface from other Android applications. Multi Task Tapping this button opens up a Multi Task menu, on which displays the active running application bookmarks. Tapping a specific bookmark enables you to switch directly to the selected application screen.  To use the camera: 1. Tap the Camera button. The camera screen opens. 2. Focus the image to be captured in the view finder. 3. Tap the inner blue circle. The view finder now shows the captured picture and auto-saves the taken photo. 4. Tap the thumbnail image on the top right corner of the screen to view the stored image. 5. Tap the Back or Home button to exit the camera application. Refer to Android documentation for additional information. 3.1.3 System Status Icons These are the standard status icons of the Android operating system. Your MaxiSys display tablet is a fully functional Android Pad. Refer to Android documentation for additional information. 3.2 Powering Down All vehicle communications must be terminated before shutting down the MaxiSys display tablet. A warning message displays if you attempt to shut down while the VCI unit is communicating with the vehicle. Forcing a shut down while communicating may lead to ECM problems on some vehicles. Exit the Diagnostics application before powering down. 16
Getting Started Install Computer Software  To power down the MaxiSys tablet: 1. Press and hold the Lock/Power Button. 2. Tap OK; the tablet will turn off in a few seconds. 3.2.1 Reboot System In case of system crash, press and hold the Lock/Power button for 8 seconds to reboot the system. 3.3 Installing Computer Software The MaxiSys Elite Diagnostic Platform allows you to realize some of its functions on a computer to enhance capabilities and improve user experience. To realize these functions on a computer, you need to install certain software. There are two Setup.exe program packages contained in the CD provided with the MaxiSys Elite tool kit. The package includes the following applications: 1. PC Link - launches a Printing Services program which receives and allows editing the files sent from the MaxiSys tablet for printing 2. Driver Program - setup driver program for the VCI device 3. Network Configuration Program and Update Agent - network configuration program and firmware update agent for the VCI device  To install the Setup.exe program 1. Insert the CD into the CD-ROM of the computer. The driver installation wizard will load momentarily. 2. Click on Next on the welcome page. 3. Click the Change button, and select a destination folder to install the program, and click Next to continue. Or directly click Next to continue without changing the default installation folder. 4. Click Install and the Setup.exe program will be installed onto the computer. 3.3.1 Printing Operation This section describes how to receive file from the MaxiSys tablet and perform 17
Getting Started Install Computer Software printing through the computer:  To perform printing through the computer 1. Install the PC Link (Printing Services program) to the computer. 2. Make sure the display tablet is connected to the computer network, either via Wi-Fi or LAN, before printing. See 7.1.3 Printing Setting on page 79 for more information. 3. Run the Printing Services program on the computer. 4. Tap the Print button on the toolbar displayed in various applications of the MaxiSys system. A temporary file will be created and sent to the computer for printing. 5. Click the Printer Server tab on the top of the program interface on the computer, and wait for the printing file to load. 6. Click the Print button to start printing. NOTE: Make sure the computer installed with the Printing Services program is connected to a printer. Refer to the accompanied user manual for the corresponding VCI device for detailed information about the operation of the network configuration program and/or the update agent. 18
Chapter 4 Diagnostics Operations By establishing a data link to the electronic control systems of the vehicle being serviced through the VCI device, the Diagnostics application allows you to retrieve diagnostic information, view live data parameters, and perform active tests. The Diagnostics application can access the electronic control module (ECM) for various vehicle control systems, such as engine, transmission, antilock brake system (ABS), airbag system (SRS) and more. 4.1 Establishing Vehicle Communication The Diagnostics operations require connecting the MaxiSys Elite Diagnostic Platform to the test vehicle through the VCI device using the main cable, and test adapters (for non-OBD II vehicles). To establish proper vehicle communication to the MaxiSys display tablet, you need to perform the following steps: 1. Connect the VCI device to the vehicle’s DLC for both communication and power source. 2. Connect the VCI device to the MaxiSys display tablet via Bluetooth pairing, USB connection, or Ethernet connection. 3. When these are done, check the VCI navigation button at the bottom bar on the screen, if the button displays a green tick icon at the lower right corner, the MaxiSys Elite diagnostic platform is ready to start vehicle diagnosis. 4.1.1 Vehicle Connection The method used to connect the VCI device to a vehicle’s DLC depends on the vehicle’s configuration as follows:  A vehicle equipped with an On-board Diagnostics Two (OBD II) management system supplies both communication and 12-volt power through a standardized J-1962 DLC.  A vehicle not equipped with an OBD II management system supplies communication through a DLC connection, and in some cases supplies 12-volt power through the cigarette lighter receptacle or a connection to the vehicle battery. 19
Diagnostics Operations Establishing Vehicle Communication OBD II Vehicle Connection This type of connection only requires the main cable without any additional adapter.  To connect to an OBD II vehicle 1. Connect the main cable’s female adapter to the Vehicle Data Connector on the VCI device, and tighten the captive screws. 2. Connect the cable’s 16-pin male adapter to the vehicle’s DLC, which is generally located under the vehicle dash. NOTE: The vehicle’s DLC is not always located under the dash; refer to the user manual of the test vehicle for additional connection information. Non-OBD II Vehicle Connection This type of connection requires both the main cable and a required OBD I adapter for the specific vehicle being serviced. There are three possible conditions for Non-OBD II vehicle connection:  DLC connection supplies both communication and power.  DLC connection supplies communication and power is to be supplied via the cigarette lighter connection.  DLC connection supplies communication and power is to be supplied via connection to the vehicle battery.  To connect to a Non-OBD II Vehicle 1. Connect the main cable’s female adapter to the Vehicle Data Connector on the VCI device, and tighten the captive screws. 2. Locate the required OBD I adapter and connect its 16-pin jack to the main cable’s male adapter. 3. Connect the attached OBD I adapter to the vehicle’s DLC. NOTE: Some adapters may have more than one adapter or may have test leads instead of an adapter. Whatever the case, make the proper connection to the vehicle’s DLC as required. 20
Diagnostics Operations Establishing Vehicle Communication  To connect the cigarette lighter 1. Plug the DC power connector of the cigarette lighter into the DC power supply input port on the device. 2. Connect the male connector of the cigarette lighter into the vehicle’s cigarette lighter receptacle.  To connect the clipper cable 1. Connect the tubular plug of the clipper cable to the male connector of the cigarette lighter. Figure 4-1 Connection between Cigarette Lighter and Clipper Cable 2. Plug the DC power connector of the cigarette lighter into the DC power supply input port of the J2534 programming device. 3. Connect the clipper cable to the vehicle’s battery. NOTE: After the VCI device is successfully connected to the vehicle, the Power LED on the device illuminates, and a brief beep sound will be heard. 4.1.2 VCI Connection After the VCI device is properly connected to the vehicle, the Power LED on the VCI device illuminates solid green light, and is ready to establish communication with the MaxiSys display tablet. The J2534 ECU Programming Device, which comes with the MaxiSys Elite tool kit, supports 3 communication methods with the MaxiSys display tablet: Bluetooth, USB, and Ethernet connection. 21
Diagnostics Operations Establishing Vehicle Communication Pairing Up via Bluetooth Among all methods, Bluetooth pairing is recommended as the first choice for the communication between the MaxiSys display tablet and the VCI device. The working range for Bluetooth communication is about 755 feet (230 m); this means you can perform vehicle diagnosis freely around the workshop with greater convenience. If you use more than one VCI device to connect to the test vehicles when customers are many, you can perform vehicle diagnosis on various vehicles conveniently, by pairing the MaxiSys display tablet separately to each of the VCI devices connected to the different test vehicles, via Bluetooth, without the need to repeat the plugging and unplugging procedure, which is unavoidable through traditional wired connection, thus saves you more time and provides more efficiency.  To pair up the MaxiSys display tablet with the VCI device via Bluetooth 1. If not already done, power up the MaxiSys display tablet. 2. Select the VCI Manager application from the MaxiSys Job Menu. 3. When the VCI Manager application is opened, the device automatically starts scanning for available VCI devices around for Bluetooth pairing. The found devices are listed in the Setting section on the right side of the screen. NOTE: If no VCI device is found, this may indicate that the signal strength of the transmitter is too weak to be detected. In this case try to get closer to the device, or reposition the VCI device, and remove all possible objects that causes signal interference. When these are done, tap the Scan button at the top right corner to start searching again. 4. The device name may display as Maxi suffixed with a serial number. Select the required device for pairing. 5. When paring is successfully done, the connection status displayed to the right of the device name is shown as Paired. 6. Wait for a few seconds, and the VCI button on the system Navigation bar at the bottom of the screen shall display a green tick icon, indicating the display tablet is connected to the VCI device, and is ready to perform vehicle diagnosis. Refer to 10.1 Bluetooth Pairing on page 94 for additional information. 22
Diagnostics Operations Establishing Vehicle Communication USB Cable Connection The USB cable connection is a simple and quick way to establish communication between the MaxiSys display tablet and the VCI device. After properly connecting the USB cable from the tablet to the VCI device, the VCI navigation button at the bottom bar of the screen shows a green tick icon in a few seconds, and the USB LED on the VCI device illuminates solid green light, indicating the connection between the devices is successful. The MaxiSys Elite diagnostic platform is now ready to perform vehicle diagnosis. NOTE: Since the USB connection provides the most stable and fastest communication, it is highly recommended to apply this communication method when operating ECU programming or coding. When all the three communication methods are applied at the same time, the MaxiSys system will use the USB communication as the default priority. Wired Connection via Ethernet This section describes the general procedure to connect the tablet with the J2534 ECU programming device via Ethernet connection. To establish successful communication, you need to set up the network configuration on the display tablet.  To connect the MaxiSys display tablet with the VCI device via Ethernet 1. If not already done, power up the MaxiSys display tablet. 2. Connect the MaxiSys Display Tablet to the J2534 ECU programming device with the accompanied Ethernet serial cable. 3. Select the VCI Manager application from the MaxiSys Job Menu. 4. Select the Wired Network option on the Connection Mode list. The Ethernet Setting screen displays on the right section. 5. Select a connection type:  DHCP – obtains the LAN IP address automatically  Manual – allows you to enter IP address manually 23
Diagnostics Operations Establishing Vehicle Communication 6. If Manual is selected, you need to set the IP address on your own. NOTE: If you are not sure about the specific IP address values, please contact your network administrator. 7. Tap Apply to set up the wired network connection. When the wired network is successfully connected, the connection status is displayed as Connected, and the two status lights at the corners alongside the Ethernet Ports on the display tablet illuminate. The solid amber light indicates steady connection, and the flashing green light indicates active communication, between the units. The VCI navigation button at the bottom bar shall display a green tick icon after a few seconds, indicating the MaxiSys Elite diagnostic platform is ready to perform vehicle diagnosis. Refer to 10.2 Wired Network Connection on page 95 for additional information. NOTES: After the MaxiSys Elite diagnostic platform has successfully established communication with the vehicle, the VCI device makes a long beep sound for confirmation. 4.1.3 No Communication Message A. If the MaxiSys Display Tablet is not connected to the VCI device, an “Error” message displays. An “Error” message indicates the display tablet is not communicating with the VCI device, and so cannot gain access to the vehicle control module. In this case, you need to do the following check-ups:  Check if the VCI device is powered on.  In case of wireless connection, check if the network is configured correctly, or if the right device has been paired.  If during the diagnosis process, the communication is suddenly interrupted due to the loss of signal, check if there is any object that causes signal interruption.  Check if the VCI device is properly positioned. It is recommended to put the VCI device with the front side up.  Try standing closer to the VCI device to obtain more stable signals, and faster communication speed.24
Diagnostics Operations Getting Started  In case of wired connection, check the cable connection between the display tablet and the VCI device.  Check if the green LED on the VCI device is illuminated for Bluetooth, Ethernet, or USB.  Check if the Error LED on the VCI device is on, this may indicate there is a communication error between the devices, in this case try re-establishing the connection again; if this does not work, there may be a hardware problem with the device, in this case contact for technical support. B. If the VCI device is unable to establish a communication link, a prompt message displays with check instructions. The following conditions are the possible causes for this massage to display:  The VCI device is unable to establish a communication link with the vehicle.  You’ve selected a system for testing that the vehicle is not equipped with.  There is a loose connection.  There is a blown vehicle fuse.  There is a wiring fault on the vehicle, or the data cable or adapter.  There is a circuit fault in the data cable or adapter.  Incorrect vehicle identification was entered. 4.2 Getting Started Prior to first use of the Diagnostics application, the VCI device must be synchronized with the MaxiSys Display Tablet to establish a communication link. See VCI Manager Operations on page 93. 4.2.1 Vehicle Menu Layout When the VCI device is properly connected to the vehicle, and paired to the MaxiSys Display Tablet, the platform is ready to start vehicle diagnosis. Tap on the Diagnostics application button on the MaxiSys Job Menu, the screen then opens the Vehicle Menu. 25
Diagnostics Operations Getting Started Figure 4-2 Sample Vehicle Menu Screen 1. Top Toolbar Buttons 2. Manufacturer Buttons Top toolbar Buttons The operations of the Toolbar buttons at the top of the screen are listed and described in the table below: Table 4-1 Top Toolbar Buttons Name Button Description Home Returns to the MaxiSys Job Menu. VIN Scan Touching this button opens a dropdown list; tap Auto Detect for auto VIN detection; tap Manual Input to enter VIN manually. All Displays all the vehicle makes in the vehicle menu. History Displays the stored test vehicle history records. This option provides you direct access to the previously tested vehicle recorded during previous test sessions. See 8.1 Vehicle History on page 84. USA Displays the USA vehicle menu. 26
Diagnostics Operations Vehicle Identification Name Button Description Europe Displays the European vehicle menu. Asia Displays the Asian vehicle menu. Domestic Displays the Domestic vehicle menu. Search Touching this button opens the virtual keyboard, allowing you to manually enter the specific vehicle make required. Cancel Touching this button exits the search screen, or cancels an operation. Manufacturer Buttons The Manufacturer buttons display the various vehicle logos and the brand names. Select the required manufacturer button after the VCI device is properly connected to the test vehicle to start a diagnostic session. The small envelop icon displays beside the vehicle brand name is tappable, touching which displays an attached PDF file, showing relevant information, such as vehicle coverage, function list, and so on for the corresponding vehicle make. 4.3 Vehicle Identification The Maxisys Elite diagnostic system supports four methods for Vehicle Identification. 1. Auto VIN Scan 2. Manual VIN Input 3. Manual Vehicle Selection 4. OBD Direct Entry 4.3.1 Auto VIN Scan The MaxiSys Elite diagnostic system features the latest VIN-based Auto VIN Scan function to identify CAN vehicles in just one touch, which allows the technician to quickly detect vehicles, scan all the diagnosable ECUs on every vehicle and run diagnostics on the selected system. 27
Diagnostics Operations Vehicle Identification  To perform Auto VIN Scan 1. Tap the Diagnostics application button from the MaxiSys Job Menu. The Vehicle Menu displays. (Figure 4-2) 2. Tap the VIN Scan button on the top toolbar. 3. Select Auto Detect. The tester starts VIN scanning on the vehicle’s ECU. Once the test vehicle is successfully identified, the system will guide you to the Vehicle Diagnostics screen directly. Figure 4-3 Sample Vehicle Diagnostics Screen 4.3.2 Manual VIN Input For some vehicles that do not support the Auto VIN Scan function, the MaxiSys Elite diagnostic system allows you to enter the vehicle VIN manually, or simply take a photo of the VIN sticker for quick vehicle identification.  To perform Manual VIN Input 1. Tap the Diagnostics application button from the MaxiSys Job Menu. The Vehicle Menu displays. (Figure 4-2) 2. Tap the VIN Scan button on the top toolbar. 3. Select Manual Input. 4. Tap the input box and enter the correct VIN. 28
Diagnostics Operations Vehicle Identification Figure 4-4 Manual VIN Input 5. Tap Done. The vehicle will be identified in a few seconds, and once the matching is successful, the system will guide you to the Vehicle Diagnostics screen directly. (Figure 4-3) 6. Tap Cancel to exit Manual Input. 4.3.3 Manual Vehicle Selection When the vehicle’s VIN is not automatically retrievable through the vehicle's ECU, or the specific VIN is unknown, you can choose to select the vehicle manually. There are generally three ways to enter the vehicle information: A. Step-by-step Vehicle Selection This mode of vehicle selection is menu driven; you simply follow the screen prompts and make a series of choices. Each selection you make advances you to the next screen. A Back button at the lower right corner of the screen returns you to the previous screen. Exact procedures may vary somewhat by various vehicles being serviced. 29
Diagnostics Operations Vehicle Identification B. Manual Vehicle Entry This mode allows you to manually enter and save specific vehicle information, such as PCM Part Number, Vehicle Calibration Number, or Tear Tag. This function enables direct access to the vehicle's ECM and saves your time of doing step-by-step entry selections.  To perform Manual Vehicle Entry - take Ford for example 1. Tap the Diagnostics application button from the MaxiSys Job Menu. The Vehicle Menu displays. (Figure 4-2) 2. Tap the USA or the All button on the top toolbar. 3. Select the Ford button from the vehicle menu. 4. Select Manual Vehicle Entry from the Vehicle Selection Menu. (Figure 4-5) A series of information screen displays, tap Yes to continue. Figure 4-5 Sample Vehicle Selection Menu 5. Select one of the three entries in the option screen - PCM Part Number, Calibration Number or Tear Tag. 6. Take the PCM Part Number entry for example; you need to fill up the accurate vehicle information in the input boxes. 30
Diagnostics Operations Vehicle Identification Figure 4-6 PCM Part Number Input Screen 7. Tap OK to continue when the input is done. A confirming screen showing the Vehicle Information displays. 8. Check if the vehicle information is correct, and then from the confirming screen, select: a) Yes to continue. b) No to return to the vehicle selection menu. 9. Select Yes and the vehicle diagnostics screen displays.(Figure 4-3) C. Auto Vehicle Entry Some vehicles provide an auto scan feature, which allows you to skip the step-by-step vehicle identification procedure and retrieve the specific vehicle information from the vehicle’s ECU directly.  To perform Auto Vehicle Entry - take Ford for example 1. Tap the Diagnostics application button from the MaxiSys Job Menu. The Vehicle Menu displays. (Figure 4-2) 2. Tap the USA or the All button on the top toolbar. 3. Select the Ford button from the vehicle menu. 4. Select Start New Session from the vehicle selection menu. A confirming screen showing the Vehicle Information displays.31
Diagnostics Operations Navigation 5. Check if the vehicle information is correct, and then from the confirming screen, select: a) Yes to continue. b) No to return to the vehicle selection menu. 6. Select Yes and the Vehicle Diagnostics screen displays. (Figure 4-3) 4.3.4 Alternative Vehicle Identification Occasionally, you may identify a test vehicle that the tester does not recognize; the database does not support, or has some unique characteristics that prevent it from communicating with the tester through the normal channels. In these instances, you are provided with the OBD direct entry, through which you can perform generic OBD II or EOBD tests. See 4.9 Generic OBD II Operations on page 57 for additional information. 4.4 Navigation This section describes how to navigate the Diagnostics interface and select test options. 4.4.1 Diagnostics Screen Layout The Diagnostics screens typically include four sections. (Figure 4-7) Figure 4-7 Sample Diagnostics Screen 32
Diagnostics Operations Navigation 1. Diagnostics Toolbar 2. Status Information Bar 3. Main Section 4. Functional Buttons Diagnostics Toolbar The Diagnostics toolbar contains a number of buttons that allow you to print or save the displayed data and make other controls. The table below provides a brief description for the operations of the Diagnostics toolbar buttons: Table 4-2 Diagnostics Toolbar Buttons Name Button Description Home Returns to the MaxiSys Job Menu. Vehicle Swap Touching this button allows you to exit the diagnostic session of the currently identified test vehicle, and returns you to the vehicle menu screen to select another vehicle for testing. Settings Opens the setting screen. See Settings Operations on page 78. Print Saves and prints a copy of the displayed data. See 3.3.1 Printing Operation for additional information on page 17. Help Provides instructions or tips for operations of various diagnostic functions. Save Tapping this button opens a submenu, on which there are 3 options available to save the displayed data.  Tap Save This Page to take a screenshot image  Tap Save All Data to save a PDF file (mostly used to save data that cover more than 1 page)  Tap Start Saving to record a video clip (only available for recording Live Data or special graph data) All saved data are stored in the Data Manager application for later reviews. See Data Manager Operations on page 63. 33
Diagnostics Operations Navigation Name Button Description Data Logging Records the communication data and ECU information of the test vehicle. The saved data can be reported and sent to the technical center via the internet. You can go to the Support application to follow up the processing progress, see Data Logging on page 104 for detailed information. Send Tapping this button submits the Data Logging report to the technical center via the internet.  To perform data printing in Diagnostics 1. Tap the Diagnostics application button from the MaxiSys Job Menu. The Print button on the diagnostic toolbar is available throughout the whole Diagnostics operations. 2. Tap Print whenever you want to make a printing. A drop-down menu appears. a) Print This Page – prints a screenshot copy of the current screen b) Print All Page – prints a PDF copy of all displayed data 3. A temporary file will be created and sent to the computer for printing. 4. When the file is transferred successfully, a confirmation message displays. NOTE: Make sure the display tablet is connected to the computer network, either via Wi-Fi or LAN, before printing. For more instructions on printing, see 3.3.1 Printing Operation on page 17 for detailed information.  To submit Data Logging reports in Diagnostics 1. Tap the Diagnostics application button from the MaxiSys Job Menu. The Data Logging button on the diagnostic toolbar is available throughout the whole Diagnostics operations. 34
Diagnostics Operations Navigation 2. Tap the Data Logging button whenever you want to commit recording for the system communication data. The button displays blue during the active recording process. 3. Tap the button again to finish recording. A submission form will display to let you fill in the report information. 4. Tap the Send button to submit the report form via the internet, a confirmation message displays when sending is successful. Status Information Bar The Status Information Bar at the top of the Main Section displays the following items: 1. Menu Title – indicates the menu subject of the Main Section 2. VCI Icon – indicates the communication status between the tablet and the VCI device 3. Battery Icon – indicates the battery status of the VEHICLE Main Section The Main Section of the screen varies depending on the stage of operations. The main section can show vehicle identification selections, the main menu, test data, messages, instructions and other diagnostic information. Functional Buttons The displayed Functional Buttons at this section of the screen varies depending on the stage of operations. They can be used to navigate, save or clear the diagnostic data, exit scanning as well as make other functional controls. The functions of these buttons will be introduced respectively in the following sections of the corresponding test operations. 4.4.2 Screen Messages Screen messages appear when additional input is needed before proceeding. There are mainly three types of on-screen messages as to their purposes: Confirmation, Warning, and Error.35
Diagnostics Operations Main Menu Confirmation Messages This type of messages usually displays as an “Information” screen, which informs you when you are about to perform an action that cannot be reversed or when an action has been initiated and your confirmation is needed to continue. When a user-response is not required to continue, the message displays briefly before automatically disappearing. Warning Messages This type of messages informs you when completing the selected action may result in an irreversible change or loss of data. The typical example for this is the “Erase Codes” message. Error Messages Error messages inform you when a system or procedural error has occurred. Examples of possible errors include a disconnected cable or communication interruption due to certain reasons. 4.4.3 Making Selections The Diagnostics application is a menu driven program that presents a series of choices one at a time. As you select from a menu, the next menu in the series displays. Each selection narrows the focus and leads to the desired test. Use your fingertip or the stylus pen to make menu selections. 4.5 Main Menu The Diagnostics application allows you to establish a data link to the electronic control system of the test vehicle via the VCI device for vehicle diagnosis, service or programming. You can operate functional tests, retrieve vehicle diagnostic information such as trouble codes, event codes and live data, and perform ECU reprogramming, for various vehicle control systems, such as engine, transmission, ABS and more. 36
Diagnostics Operations Diagnosis The Vehicle Diagnostics screen (Figure 4-3) has three main options: 1. Diagnosis – a comprehensive section which includes all available functions: reading, clearing, saving and printing diagnostic information, as well as performing active tests and special functions 2. Service – a separate section designed to perform vehicle scheduled service and maintenance, such as to reset the service lights and perform calibration for various systems 3. Programming/Coding – a separate section designed for quick access to ECU reprogramming operations After a section is selected and the tablet establishes communication with the vehicle via the VCI device, the corresponding function menu or selection menu displays. 4.6 Diagnosis There are two options available when accessing the Diagnosis section: 1. Auto Scan – starts auto scanning for all the available systems on the vehicle 2. Control Units – displays a selection menu of all available control units of the test vehicle Auto Scan The Auto Scan function performs a comprehensive scanning over all the systems on the vehicle’s ECU in order to locate fault systems and retrieve DTCs. The sample operation interface of Auto Scan displays as below: 37
Diagnostics Operations Diagnosis Figure 4-8 Sample Auto Scan Operation Screen 1. Navigation Bar 2. Main Section 3. Functional Buttons  Navigation Bar 1. List Tab – displays the scanned data in list format 2. Tree Tab – display the scanned data in system distribution diagram format 3. Progress Bar – indicates the test progress  Main Section A. List Tab Column 1 - displays the system numbers Column 2 - displays the scanned systems Column 3 - displays the diagnostic marks indicating different conditions of the test result: -!-: Indicates that the scanned system may not support the code reading function, or there is a communication error between the tester and the control system. 38
Diagnostics Operations Diagnosis -?-: Indicates that the vehicle control system has been detected, but the tester cannot accurately locate it. Fault | #: Indicates there is/are detected fault code(s) present; “#” indicates the number of the detected faults. Pass | No Fault: Indicates the system has passed the scanning process and no fault has been detected. B. Tree Tab The tree tab screen displays a system distribution diagram of the vehicle control modules. The scanned system which has passed scanning with no fault is shown in blue font; whereas the scanned system that has been detected with fault present is shown in red font.  Tab the ○>E A button to the right of the system item, on which you want to perform further diagnosis and other test activities. A Function Menu screen (Figure 4-9) shall then display.  Functional Buttons The table below provides a brief description of the Functional Buttons’ operations in Auto Scan: Table 4-3 Functional Buttons in Auto Scan Name Description Back Returns to the previous screen or exit Auto Scan. Pause Suspends scanning and changes to show the Continue button. OK Confirms the test result, and continues to the system diagnosis after selecting the required system by tapping the item in the Main Section. Quick Erase Deletes codes. A warning message screen will display to inform you of possible data loss when this function is selected. Report Displays the diagnostic data in the report form. Save Saves the diagnostic session as a history record, this allows you to quickly restore access to the test systems. 39
Diagnostics Operations Diagnosis Control Units This option allows you to manually locate a required control system for testing through a series of choices. You simply follow the menu driven procedure, and make proper selection each time; the program will guides you to the diagnostic function menu after a few choices you’ve made. Figure 4-9 Sample Function Menu Screen The Function Menu options vary slightly by different vehicles. The function menu may include:  ECU Information – provides the retrieved ECU information in detail. Selecting opens an information screen.  Read Codes – displays detailed information of DTC records retrieved from the vehicle control module.  Erase Codes – erases DTC records and other data from the ECM.  Live Data – retrieves and displays live data and parameters from the vehicle’s ECU.  Active Test – provides specific subsystem and component tests. This selection may appear as Actuators, Actuator Test, or Function Tests, etc., and the tests options vary depending on the manufacturer and model. 40
Diagnostics Operations Diagnosis  Special Functions – provides component adaptation or variant coding functions for custom configurations, and also allows you to reprogram adaptive values for certain components after making repairs. Depending on the test vehicle, this selection may sometimes appear as Control Unit Adaptations, Variant Coding, Configuration or something similar. NOTE: With the diagnostic toolbar on top of the screen throughout the whole diagnostic procedures, you are allowed to make various controls of the diagnostic information at anytime, such as printing and saving the displayed data, get help information, or perform data logging, etc.  To perform a diagnostic function 1. Establish communication with the test vehicle via the VCI device. 2. Identify the test vehicle by selecting from the menu options. 3. Select the Diagnosis section. 4. Locate the required system for testing by Auto Scan or through menu driven selections in Control Units. 5. Select the desired test from the Function Menu. 4.6.1 ECU Information This function retrieves and displays the specific information for the tested control unit, including unit type, version numbers and other specifications. The sample ECU Information screen displays as below: Figure 4-10 Sample ECU Information Screen 41
Diagnostics Operations Diagnosis 1. Diagnostics Toolbar Buttons – see Table 4-2 Diagnostics Toolbar Buttons on page 33 for detailed descriptions of the operations for each button. 2. Main Section – the left column displays the item names; the right column shows the specifications or descriptions. 3. Functional Button – In this case, only a Back (or sometimes an ESC) button is available; tap it to exit after viewing. 4.6.2 Read Codes This function retrieves and displays the DTCs from the vehicle’s control system. The Read Codes screen varies for each vehicle being tested, on some vehicles, freeze frame data can also be retrieved for viewing. The sample Read Codes screen displays as below: Figure 4-11 Sample Read Codes Screen 1. Diagnostics Toolbar Buttons – see Table 4-2 Diagnostics Toolbar Buttons on page 33 for detailed descriptions of the operations for each button. 2. Main Section  Code Column – displays the retrieved codes from the vehicle. 42
Diagnostics Operations Diagnosis  Status Column – indicates the status of the retrieved codes.  Description Column – detailed descriptions for the retrieved codes.  Snowflake Icon – only displays when freeze frame data is available for viewing; Selecting displays a data screen, which looks very similar to the Read Codes interface, therefore same operation method may be applied. 3. Functional Button – in this case, only a Back (or sometimes an ESC) button is available; tap it to return to the previous screen or exit the function. 4.6.3 Erase Codes After reading the retrieved codes from the vehicle and certain repairs have been carried out, you can decide to erase the codes from the vehicle using this function. Before performing this function, make sure the vehicle’s ignition key is in the ON (RUN) position with the engine off.  To erase codes 1. Tap Erase Codes from the Function Menu. 2. A warning message displays to inform you of data loss when this function is applied. a) Tap Yes to continue. A confirming screen displays when the operation is successfully done. b) Tap No to exit. 3. Tap ESC on the confirming screen to exit Erase Codes. 4. Check the Read Codes function again to ensure the operation is successful. 4.6.4 Live Data When this function is selected, the screen displays the data list for the selected module. The items available for any control module vary from one vehicle to another. The parameters display in the order that they are transmitted by the ECM, so expect variation between vehicles. 43
Diagnostics Operations Diagnosis Gesture scrolling allows you to quickly move through the data list. Simply touch the screen and drag your finger up or down to reposition the parameters being displayed if the data covers more than one screen. The figure below shows a typical Live Data screen: Figure 4-12 Sample Live Data Screen 1. Diagnostics Toolbar Buttons – tap the drop-down button at the top center of the screen displays the toolbar buttons. See Table 4-2 Diagnostics Toolbar Buttons on page 33 for detailed descriptions of the operations for each button. 2. Main Section  Name Column – this column displays the parameter names. a) Check Box - tap the check box at the left side of the parameter name to make selection of an item. Tap the check box again to deselect the item. b) Drop-down Button – tapping the drop-down button at the right side of the parameter name opens a submenu, which provides various choices for data display mode.  Value Column – displays the values of the parameter items.  Range Column - displays the minimum and the maximum limit value.  Unit Column – displays the unit for the parameter values. 44
Diagnostics Operations Diagnosis  To change the Unit mode, tap the Setting button on the top toolbar and select a required mode. See 7.1.1 Unit on page 78 for more information. 3. Display Mode There are 4 types of display modes available for data viewing, allowing you to view various types of parameters in the most suitable way for better data check-ups. Tapping the drop-down button on the right side of the parameter name opens a submenu. There are 4 buttons to configure the data display mode, plus one Help button on the right, tappable when additional information is available for your reference. Each parameter item displays the selected mode independently. Analog Gauge Mode – displays the parameters in form of an analog meter graph Text Mode – this is the default mode which displays the parameters in texts and shows in list format NOTE: Reading of status parameters, such as a switch reading, which are mostly in word form, like ON, OFF, ACTIVE, and ABORT, etc., can only be displayed in Text Mode. Whereas reading of value parameters, such as a sensor reading, can be displayed in text mode and other graph modes. Waveform Graph Mode – displays the parameters in waveform graphs When displaying this mode, three control buttons will appear on the right side of the parameter item, allowing you to manipulate the display status.  Text Button – resumes Text Display Mode  Scale Button – changes the scale values, which are displayed below the waveform graph. There are 4 scales available: x1, x2, x4 and x8.  Zoom-in Button – tap once to display the selected data graph in full screen Digital Gauge Mode– displays the parameters in form of a digital gauge graph Full Screen Display – this option is only available in the waveform graph mode, and mostly used in Graph Merge status for data comparison. There are three control buttons available on the top right side of the screen under this mode. 45
Diagnostics Operations Diagnosis  Edit Button – tapping this button opens an edit window, on which you can set the waveform color and the line thickness displayed for the selected parameter item.  Scale Button - changes the scale values, which are displayed below the waveform graph. There are 4 scales available: x1, x2, x4 and x8.  Zoom-out Button – exits full screen display.  To edit the waveform color and line thickness in a data graph 1. Select 1 to 3 parameter items to display in Waveform Graph mode. 2. Tap the Zoom-in Button on the right to display the data graph in full screen. 3. Tap the Edit Button, an edit window appears. 4. Select a parameter item on the left column. 5. Select a desired sample color from the second column. 6. Select a desired sample line thickness from the right column. 7. Repeat step 4-7 to edit the waveform for each parameter item. 8. Tap Done to save the setting and exit, or tap Cancel to exit without saving. 4. Functional Buttons The operations of all the available functional buttons on Live Data screen are described below: Back – returns you to the previous screen or exit the function. Record – starts recording the retrieved live data; the recorded data is then stored as a video clip in the Data Manager application for future reviews. This function could be triggered automatically at preset threshold value or manually as you choose, and the triggering mode and record duration can be configured in the Setting mode of Live Data. Freeze – displays the retrieved data in freeze mode.  Previous Frame – Moves to the previous frame in the freeze data.  Next Frame – Moves to the next frame in the freeze data. Resume – this button appears when the Record or Freeze function is applied. Tapping this button stops data recording, or exit freeze data mode, and resumes normal data display mode. 46
Diagnostics Operations Diagnosis Flag – this button appears when the Record function is applied. Tapping this button sets flags for the recorded data at points wherever you choose, when playing back the recorded video clip later in Data Manager, the preset flag will enable a popup to allow input of text to take notes. Clear Data –tapping which clears all previously retrieved parameter values at a cutting point whenever you choose. To Top – moves a selected data item to the top of the list. Graph Merge – tap this button to merge selected data graphs (for Waveform Graph Mode only). This function is very useful when making comparison for different parameters. NOTE: This mode supports Graph Merge for 2 to 3 parameter items only, so select no less than 2 or more than 3 items each time when making graph merge.  To cancel Graph Merge mode, tap the drop-down button on the right side of the parameter name, and select a data display mode. Show Selected/Show All – tap this option to exchange between the two options; one displays the selected parameter items, the other displays all the available items. Setting – tapping this button opens a setting screen, which allows you to set the trigger mode, recording duration, and various threshold values for data recording, and make other controls. Figure 4-13 Sample Setting Mode in Live Data 47
Diagnostics Operations Diagnosis There are 4 navigation buttons on top of the Setting mode screen.  Range Button – displays the configuration screen on which you can set the threshold values, an upper limit and a lower limit, for triggering the buzzer alarm. This function is only applied to the Waveform Graph display mode. a) MIN – tapping which opens a virtual keyboard, allows you to enter the required lower limit value b) MAX – tapping which opens a virtual keyboard, allows you to enter the required upper limit value c) Buzzer Alarm – switches the alarm on and off. The alarm function makes a beep sound as a reminder whenever the data reading reaches the preset minimum or maximum point  To set threshold limits for the parameter values 1. Tap the Setting functional button at the bottom of the Live Data screen. 2. Tap the Range navigation button. 3. Select a parameter item on the left column, or enter the item name in the Search bar. 4. Tap on the right side of the MIN button, and enter the required minimum value. 5. Tap on the right side of the MAX button, and enter the required maximum value. 6. Tap the ON/OFF button on the right side of the Buzzer Alarm button to turn it on or off. 7. Tap Done to save the setting and return to the Live Data screen; or tap Cancel to exit without saving. If the threshold limits are successfully set, two horizontal lines now appear on each of the data graphs (when Waveform Graph Mode is applied) to indicate the alarming point. The threshold lines are shown in different colors than the waveform of the parameters for distinction.  Record Button – displays the configuration screen for Record Setting, on which you can set the trigger type, duration and trigger point for the data recording function. 48
Diagnostics Operations Diagnosis a) Trigger Type – sets the trigger mode for data recording, mainly of two kinds: Manual and Auto. There are four options available: 1) Manual – allows you to manually start and stop data recording 2) DTC – auto triggers data recording when any DTC is detected 3) DTC Check Mode – auto triggers data recording when certain pre-selected DTC types are detected 4) Parameter – auto triggers data recording when any parameter value reaches the preset threshold b) Duration – sets the recording time (for Auto trigger mode only) c) Trigger Point – reserves a relative percentage of a record length before the data recording start point for reference (for Auto trigger mode only)  To perform setting for live data record 1. Tap the Setting functional button at the bottom of the Live Data screen. 2. Tap the Record navigation button. 3. Tap the A○>E A button on the right of Trigger Type bar and select the required trigger mode. 4. Tap the A○>E A button on the right of Duration bar and select a length of time. 5. Tap the A○>E A button on the right of Trigger Point bar and select a relative percentage of a record length to be reserved before the data recording start point. 6. Tap Done to save the setting and return to the Live Data screen; or tap Cancel to cancel without saving and exit Setting.  Done Button - confirms and saves the setting, and returns you to the Live Data screen.  Cancel Button – cancel the setting operation, and returns you to the Live Data screen. 49
Diagnostics Operations Diagnosis 4.6.5 Active Test The Active Test function is used to access vehicle-specific subsystem and component tests. Available test vary by manufacturer, year, and model, and only the available tests display in the menu. During an active test, the tester outputs commands to the ECU in order to drive the actuators. This test determines the integrity of the system or parts by reading the engine ECU data, or by monitoring the operation of the actuators, such as switching a solenoid, relay, or switch, between two operating states. Selecting Active Test opens a menu of test options that varies by make and model. Selecting a menu option activates the test. Follow all screen instructions while performing tests. How and what information is presented on the screen varies according to the type of test being performed. Some toggle and variable control tests display Active Test Controls at the top of the screen with data stream information below, or vice versa. Figure 4-14 Sample Active Test Screen The functional buttons at the lower right corner of the Active Test screen manipulate the test signals. The operational instructions are displayed on the main section of the test screen. Simply follow the on-screen instructions and make appropriate selections to complete the tests. Each time when an operation is successfully executed, message such as “Command Finished”, “Activation Successful”, or something similar displays. Tap the ESC functional button to exit the test when finished. 50
Diagnostics Operations Diagnosis 4.6.6 Special Functions These functions perform various component adaptations, allowing you to recalibrate or configure certain components after making repairs or replacement. The main section of the Adaptation Operation screen displays a list of operational and vehicle status information, which mainly consists of four parts: 1. The first part in the top line shows the description of the operation being performed, and the execution status is displayed on the right, such as Completed, or Activated, etc. 2. The second part shows the preconditions or requirements for executing the operation being selected. 3. The third part displays the current conditions of the vehicle control module being learned for comparison to the preconditions suggested by the second part. If the current condition of the control module is out of the suggested limit value, you must adjust the vehicle condition to meet the requirement. 4. The last part displays the instruction of how to use the functional button at the lower right corner of the screen to manipulate the teach-in operations. Figure 4-15 Sample Adaptation Operation Screen 51
Diagnostics Operations Service Read the information carefully and check the vehicle condition accordingly, when you are sure that the vehicle is ready to perform the adaptation, simply follow the instruction provided to make appropriate selections. When the operation is done, an execution status message such as Completed, Finished or Successful, displays. Tap the ESC button to exit the function. 4.7 Service The Service section is specially designed to provide you quick access to the vehicle systems for various scheduled service and maintenance performances. The typical service operation screen is a series of menu driven executive commands. By following the on-screen instructions to select appropriate execution options, enter correct values or data, and perform necessary actions, the system will guide you through the complete performance for various service operations. The most commonly performed service functions include:  Oil Reset Service  TPMS Programming Service  EPB Service  ABS/SRS Services  SAS Calibration Service  DPF Regeneration Service 4.7.1 Function Descriptions This section describes the main functions for vehicle service: Oil Reset Service This function allows you to perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depend on the vehicle driving conditions and climate. The Oil Life Reminder must be reset every time the oil is changed, so the system can calculate when the next oil change is required. Tire Pressure Monitor System (TPMS) Service This function allows you to quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS programming and reset procedures after tire sensors are replaced.52
Diagnostics Operations Programming and Coding Electric Parking Brake (EPB) Service This function has a multitude of usages to maintain the electronic braking system safely and effectively. The applications include deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc. ABS/SRS Services This function allows you to perform various bi-directional tests to check the operating conditions of both the Anti-lock Braking System and the Supplemental Restraint System, such as Automated Bleeding, Pump Motor Test, and checking Module information, etc. Steering Angle Sensor (SAS) Service This service function allow you to perform calibration for the Steering Angle Sensor, which permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM. On successful completion of the calibration, the steering angle sensor fault memory is automatically cleared. DPF Regeneration Service The Diesel Particulate Filter service function performs the regeneration procedure which is the DPF cleaning operation to clear the blockage through continuous burning of the particulate matter captured in the DPF filter. If the DPF light on the vehicle comes on and you successfully complete a DPF regeneration cycle, you will notice that the DPF light will automatically turn off. 4.8 Programming and Coding Since the introduction of OBD II and leading up to modern Hybrids and EVs, computers and software in cars have been expanding at an exponential rate. In-car software is becoming one of the leading needs for service, and updating software may be the only way to fix some of these issues:  Drivability  Fuel Efficiency  Power Loss  Fault Codes  Durability of Mechanical Parts 53
Diagnostics Operations Programming and Coding The Programming and Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. NOTE: The programming function can only be applied through connection with the J2534 programming device, which serves as a PassThru interface to establish communication with and transfer data to the vehicle’s ECU. Available programming or coding operations vary by the test vehicle, and only the available operations display in the menu. There are two general types of programming operations: A. Coding – also known as Teach-in Program, Component Adaptation or something similar, is used to reprogram adaptive data for vehicle control modules after repairs or replacements of vehicle parts. B. Reprogramming Operations – downloads new version of software subscription from the on-line server database through internet access (this procedure is done automatically when the MaxiSys display tablet is connected to the internet, so there is no need to check for software subscriptions yourself), and reprograms the newest software version to the vehicle’s ECU. NOTE: Ensure that the display tablet is connected to the Internet before applying the ECU programming function, so that the display tablet is able to obtain access to the manufacturer’s server for update service. Selecting the Programming or Coding function opens a menu of operation options that varies by make and model. Selecting a menu option either shows a programming interface or opens another menu of additional choices. Follow all screen instructions while performing the programming or coding operations. How and what information is presented on the screen varies according to the type of operation being performed. 54
Diagnostics Operations Programming and Coding Variant Coding Figure 4-16 Sample Variant Coding Screen The main section of the Variant Coding screen displays a list of vehicle components and the coding information which mainly consists of three parts: 1. The top line on the list displays the instruction of how to use the functional button at the lower right corner of the screen to manipulate the coding operations. 2. The second part under the top line of the list displays all available systems for coding on the left side, and the coding data or value on the right side. 3. The bottom line of the main section displays the functional buttons, which allow you to manipulate the operation. Check the vehicle condition and the coding information carefully, and use the functional button to edit Codes for the corresponding components, tap Send when you finish edit for all the items. When the operation is done, an execution status message such as Completed, Finished or Successful, may display. Tap the ESC button to exit the function. 55
Diagnostics Operations Programming and Coding Reprogramming Operation Typical reprogramming operations require you to input and validate VIN number first. Tap the input box and enter the correct number, the programming interface then displays. Figure 4-17 Sample Reprogramming Operation Screen The main section of the reprogramming interface provides you certain hardware version, and current software versions’ information, as well as the information of the newest software versions to be programmed to the control units. Throughout the programming procedure, a series of on-screen operational instructions will display to guide you through. Carefully read the on-screen information and follow the instruction to execute the programming procedure. Re-flash Errors IMPORATANT: When reprogramming onboard, always make sure the vehicle battery is fully charged and in good working condition. During reprogramming there is a risk of having the operation failure if voltage falls below the proper operation voltage. Sometimes a failed operation can be recovered, but there is a chance that failed reprogramming could ruin the control module. We recommend connecting an external battery charger to the vehicle to ensure a successful operation.56
Diagnostics Operations Generic OBD II Operations Occasionally a flash update procedure may not complete properly. Common causes of flash errors include poor cable connections between the display tablet, VCI, and vehicle, turning off the vehicle ignition switch before the flash procedure is complete, or low vehicle battery voltage. If the process crashes, recheck all the cable connections to assure good communications and reinitialize the flash procedure. The programming procedure will automatically repeat if the previous operation does not succeed. 4.9 Generic OBD II Operations A fast-access option for OBD II/EOBD vehicle diagnosis is available on the Vehicle Menu screen (Figure 4-2). This option presents a quick way to check for DTCs, isolate the cause of an illuminated malfunction indicator lamp (MIL), check monitor status prior to emissions certification testing, verify repairs, and perform a number of other services that are emissions-related. The OBD direct access option is also used for testing OBD II/EOBD compliant vehicles that are not included in the Diagnostics database. Functions of the diagnostics toolbar buttons at the top the screen are the same as those available for specific vehicle diagnostics. See Table 4-2 Diagnostics Toolbar Buttons on page 33 for details. 4.9.1 General Procedure  To access the OBD II/EOBD diagnostics functions 1. Tap the Diagnostics application button from the MaxiSys Job Menu. The Vehicle Menu displays. 2. Tap the EOBD button. There are two options to establish communication with the vehicle.  Auto Scan – When this option is selected the diagnostic tool attempts to establish communication using each protocol in order to determine which one the vehicle is broadcasting on.  Protocol – When this option is selected the screen opens a submenu of various protocols. A communication protocol is a standardized way of data communication between an ECM and a diagnostic tool. Global OBD may use several different communication protocols. 57
Diagnostics Operations Generic OBD II Operations 3. Select a specific protocol if the Protocol option is selected. Wait for the OBD II Diagnostic Menu to appear. Figure 4-18 Sample OBD II Diagnostic Menu NOTE: The A○iE A button displayed beside the function name is tappable, tapping which opens a bubble with additional function information. 4. Select a function option to continue.  DTC & FFD  I/M Readiness  Live Data  O2 Sensor Monitor  On-Board Monitor  Component Test  Vehicle Information  Vehicle Status NOTE: Some functions are supported only on certain vehicle makes. 58
Diagnostics Operations Generic OBD II Operations 4.9.2 Function Descriptions This section describes the various functions of each diagnostic option: DTC & FFD When this function is selected, the screen displays a list of Stored Codes and Pending Codes. When the Freeze Frame data of certain DTCs are available for viewing, a snowflake button will display on the right side of the DTC item. The Erase Codes function can be applied by tapping the functional button at the lower bottom of the screen. Figure 4-19 Sample DTC & FFD Screen  Stored Codes Stored codes are the current emission related DTCs from the ECM of the vehicle. OBD II/EOBD Codes have a priority according to their emission severity, with higher priority codes overwriting lower priority codes. The priority of the code determines the illumination of the MIL and the codes erase procedure. Manufacturers rank codes differently, so expect to see differences between makes.  Pending Codes These are codes whose setting conditions were met during the last drive cycle, but need to be met on two or more consecutive drive cycles before the DTC actually sets. The intended use of this service is to assist the service technician after a vehicle repair and after clearing diagnostic information, by reporting test results after a single driving cycle. 59
Diagnostics Operations Generic OBD II Operations a) If a test failed during the driving cycle, the DTC associated with that test is reported. If the pending fault does not occur again within 40 to 80 warm-up cycles, the fault is automatically cleared from memory. b) Test results reported by this service do not necessarily indicate a faulty component or system. If test results indicate another failure after additional driving, then a DTC is set to indicate a faulty component or system, and the MIL is illuminated.  Freeze Frame In most cases the stored frame is the last DTC that occurred. Certain DTCs, those that have a greater impact on vehicle emission, have a higher priority. In these cases, the highest priority DTC is the one for which the freeze frame records are retained. Freeze frame data includes a “snapshot” of critical parameter values at the time the DTC is set.  Erase Codes This option is used to clear all emission related diagnostic data such as, DTCs, freeze frame data and manufacturer specific enhanced data from the vehicle’s ECM, and resets the I/M Readiness Monitor Status for all vehicle monitors to Not Ready or Not Complete status. A confirmation screen displays when the clear codes option is selected to prevent accidental loss of data. Select Yes on the confirmation screen to continue, or No to exit. I/M Readiness This function is used to check the readiness of the monitoring system. It is an excellent function to use prior to having a vehicle inspected for compliance to a state emissions program. Selecting I/M Readiness opens a submenu with two choices:  Since DTCs Cleared – displays the status of monitors since the last time the DTCs are erased.  This Driving Cycle – displays the status of monitors since the beginning of the current drive cycle. 60
Diagnostics Operations Generic OBD II Operations Live Data This function displays the real time PID data from ECU. Displayed data includes analog inputs and outputs, digital inputs and outputs, and system status information broadcast on the vehicle data stream. Live data can be displayed in various modes, see 4.6.4 Live Data on page 43 for detailed information. O2 Sensor Monitor This option allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer. The O2 Sensor Monitor test function is not supported by vehicles which communicate using a controller area network (CAN). For O2 Sensor Monitor tests results of CAN-equipped vehicles, refer to On-Board Monitor. On-Board Monitor This option allows you to view the results of On-Board Monitor tests. The tests are useful after servicing or after erasing a vehicle’s control module memory. Component Test This service enables bi-directional control of the ECM so that the diagnostic tool is able to transmit control commands to operate the vehicle systems. This function is useful in determining how well the ECM responds to a command. Vehicle Information The option displays the vehicle identification number (VIN), the calibration identification, and the calibration verification number (CVN), and other information of the test vehicle. Vehicle Status This item is used to check the current condition of the vehicle, including communication protocols of OBD II modules, retrieved codes amount, status of the Malfunction Indicator Light (MIL), and other additional information may be displayed. 61
Diagnostics Operations Exiting Diagnostics 4.10 Exiting Diagnostics The Diagnostics application remains open as long as there is an active communication with the vehicle. You must exit the diagnostics operation interface to stop all communications with the vehicle before closing the Diagnostics application. NOTE: Damage to the vehicle electronic control module (ECM) may occur if communication is disrupted. Make sure the all connections, such as data cable, USB cable, and wireless or wired network, are properly connected at all times during testing. Exit all tests before disconnecting the test cable or powering down the tool.  To exit the Diagnostics application 1. From an active diagnostic screen, tap the Back or ESC functional button to exit a diagnostic session step-by-step; Or 2. Tap the Vehicle Swap button on the diagnostics toolbar to return to the Vehicle Menu screen. 3. From the vehicle menu screen, tap the Home button on the top toolbar; or tap the Back button on the navigation bar at the bottom of the screen. Or 4. Tap the Home button on the diagnostics toolbar to exit the application directly to the MaxiSys Job Menu. Now, the Diagnostics application is no longer communicating with the vehicle and it is safe to open other MaxiSys applications, or exit the MaxiSys Elite Diagnostic System and return to the Android System’s Home screen. 62
Chapter 5 Data Manager Operations The Data Manager application is used to store, print, and review the saved files. Most operations are controlled through the toolbar. Selecting the Data Manager application opens the file system menu. Different file types are sorted separately under different options, there are six types of information files to be viewed or played back. Figure 5-1 Sample Data Manager Main Screen 5.1 Operations Data Manager Operations are based on toolbar controls, details are explained in the following sections. 5.1.1 Image Files The Image section is a JPG database containing all captured screenshot images. 63
Data Manager Operations Operations Figure 5-2 Sample Image Database Screen 1. Toolbar Buttons – used to edit, print and delete the image files. See Table 5-1 Toolbar Buttons in JPG Database on page 64 for detailed information. 2. Main Section – displays the stored images. Table 5-1 Toolbar Buttons in JPG Database Name Button Description Back Returns to the previous screen. Enter Edit Touching this button shows the editing toolbar to print, delete or view image information. Cancel Touching this button close the editing toolbar or cancels file search. Search Quickly locates the image file by entering the vehicle name, test path, file name or file info. Info Touching this button opens a window displaying the detail information of the image. Print Touching this button prints the selected image. Delete Touching this button deletes the selected image. 64
Data Manager Operations Operations  To edit image information 1. Select Data Manager application from the MaxiSys Job Menu. 2. Select Image to access the JPG database. 3. Select an image to display it in full screen. 4. Tapping the screen once displays the editing toolbar. 5. Tap the Info button to open a window displaying the image information. 6. Tap the Edit button on the top right corner of the window. The editing screen displays. 7. Edit the image information by entering the new file name, and file information. 8. Tap Done to save the information and exit, or tap Cancel to exit without saving.  To delete selected images 1. Select Data Manager application from the MaxiSys Job Menu. 2. Select Image to access the JPG database. 3. Tap the Enter Edit button to display the editing toolbar. 4. Select the images that need to be deleted by tapping the thumbnail images, the selected thumbnail displays a tick icon at the bottom right corner. 5. Tap the Delete button, and then Delete Selected, now the selected images are deleted. 5.1.2 PDF Files The PDF section stores and displays all PDF files of saved data. After entering the PDF database, select a PDF file to view the stored information. This section uses the standard Adobe Reader application for file viewing and editing, please refer to the associated Adobe Reader manual for more detailed instructions. 65
Data Manager Operations Operations 5.1.3 Review Data The Review Data section allows you to playback the recorded data frames of live data streams. On the Review Data main screen, select a record file to playback. Figure 5-3 Sample Data Playback Screen 1. Drop-down Toolbar – tap the button at the top center of the screen to open the Drop-down Toolbar 2. Main Section – displays the recorded data frames 3. Navigation Toolbar – allows you to manipulate data playback Use the Navigation Toolbar buttons to playback the record data from frame to frame. Tap Back to exit data playback. 5.1.4 Apps Manager This section allows you to manage the firmware applications installed on the MaxiSys Elite Diagnostic System. Selecting this section opens a managing screen, on which you can check all the available vehicle diagnostic applications. 66
Data Manager Operations Operations Select the vehicle firmware you want to delete by tapping on the car brand icon, the selected item will display a blue tick at the upper right corner. Tap the Delete button on the top bar to delete the firmware from the system database. 5.1.5 Data Logging The Data Logging section allows you to launch Support platform directly to view all records of every sent or unsent (saved) data logging on the diagnostic system. For more details, please refer to 12.5 Data Logging on Page 104. 67
Chapter 6 MaxiFix Operations The MaxiFix application launches the on-line troubleshooter database, which not only provides you virtually all common diagnostic trouble code (DTC) database for most vehicles, but also serves as a forum allowing you to network with other MaxiSys users, and gives you access to a vast database of repair and diagnostic tips along with proven filed fixes. While the MaxiFix provides the abundant troubleshooter information available, the database keeps growing with daily troubleshooting resources by recording the reported solution cases, and the advisory reports of the MaxiSys users from all over the world. Information in the MaxiFix database is organized into a series of diagnostic tips that are designed to quickly lead you to the root cause of a particular problem on the test vehicle, which will help you quickly find solution for various diagnostic problems. 6.1 Navigation You need to register the device to your online account before launching the MaxiFix platform, see 12.1 Product Registration on page 99 for details. Figure 6-1 Sample MaxiFix Home Page 68
MaxiFix Operations Navigation The MaxiFix interface has 3 main areas: 1. Header Bar – located across the top of the page, is used to select vehicles and perform keyword searches. 2. Navigation Bar – located along the left-hand side of the page is used to access the main features of MaxiFix. 3. Main Screen – The center portion of the page presents content based on the vehicle attributes and keywords selected. The main screen also has tabs that allow you to switch between functions. Which tabs are available depend on which function is selected on the Navigation Bar. Header Bar The Header Bar, which runs across the top of the page, features:  A Select Vehicle button to open the vehicle identification window, and vehicle information bar displaying the active vehicle information, for example “2013 > Honda > Crosstour > EX”.  A search field used for entering keywords, codes, or symptoms. Select Vehicle Button The “Select Vehicle” button, located on the Header Bar, is used to identify which vehicle you want to reference on MaxiFix. Vehicle attributes are selected from a sequence of option lists. Make a selection to advance through the lists. This data is used to filter searches so that only information that applies to the identified vehicle is shown.  To select a vehicle 1. Tap the Select Vehicle button on the Header Bar at the top of the page. 2. Select the year of the vehicle from the list that displays. 3. Select the make of the vehicle from the list that displays. 4. Select the model of the vehicle from the list that displays. 5. Select the submodel of the vehicle from the list that displays. 6. Select the engine of the vehicle from the list that displays. 7. After making a full selection by choosing all vehicle attributes, the screen refreshes and the selected vehicle is now shown on the Header Bar. 69
MaxiFix Operations Navigation 6.1.1 Terminology MaxiFix Tip MaxiFix Tips are concise and complete descriptions of a real fix for a particular vehicle repair issue. A MaxiFix Tip is a combination of proven fixes and vehicle specific data we have collected and analyzed into an all-in-one information source to help you fix vehicle problems quickly and easily. On MaxiFix you can search for Tips or enter your own Tip to help other community members resolve vehicle issues. MaxiFix Tips consist of 3 types of Tips: 1. Autel Certified Tips – these tips have gone through rigorous review by experts. 2. Real Fix Tips – these tips are gathered from actual shop repair orders and are presented in an easy to understand Complaint, Cause, Correction format. 3. MaxiFix Community Tips – these are Tips that have been created by the MaxiFix Community Members.  To search for a MaxiFix Tip 1. Tap the Select Vehicle button on the Header Bar at the top of the page to select a specific vehicle. 2. Enter a search term into the input field of the search bar which is located on the Main Screen. 3. The search results are displayed in a list. Find a subject that interests you; tap it to view the full details. Fixed It! The “Fixed It!” designation that appears in the head line of a Tip indicates that the Tip in question has actually helped at least one technician in the community repair a vehicle. Anytime you read a Tip you are given the opportunity to add to the Fixed It! count if the Tip helped you repair a problem. Each time someone taps “Fixed It!” in the tip, one is added to the total number of Fixed It! for the tip. The Fixed It! count lets you easily see what tips are actually helping to resolve vehicle issues. 70
MaxiFix Operations Operations 6.2 Operations The Navigation Bar is on the left side of the screen. Buttons on the Navigation Bar launch the main sections of MaxiFix. Available Navigation Bar selections include:  Home – shows the recently viewed questions and fixes, the Leaderboard, along with a link to your profile information.  My MaxiFix – shows all your posts including Questions and Tips in the community, and allows you to ask a question and enter a tip.  Search Fix – allows you to search for information from all available resources on MaxiFix, including: Open Questions, Tips, and Real Fixes, and displays search results.  All Questions – displays the latest questions and fixes.  My Messages – shows a list of message notifications which is relevant to your activities in the Question section.  Support – opens the FAQ page, or a message box for contacting Customer Service by email. 6.2.1 Home Home, is the first option on the Navigation Bar along the left side of the screen, opens the home page on MaxiFix. There are three functions available.  Leaderboard – shows the top ranked MaxiFix community members.  My Recently Viewed – shows a list with links to the Questions, Tips, and Real Fixes that you recently visited.  Profile Information – quick link to your profile information page. Leaderboard The Leaderboard shows the top ranked MaxiFix community members. Community members are awarded points for answering questions, and those who gather the most points show on the MaxiFix Leaderboard. The more points you have the better the chance you have to get on the Leaderboard. 71
MaxiFix Operations Operations To show on the Leaderboard the community members must answer questions to get points. Points System  3 points are awarded when you close a question.  2 points are awarded if your closed question is picked as "Fixed it!" by no less than 20 community members.  4 points are awarded if your answer is rated as the “Best Answer”.  1 point is awarded if your answer is rated as the "Best Answer" for a closed question which is picked as "Fixed it!" by no less than 20 community members.  1 point is awarded to each of the first three respondents. Edit Profile Information You can view or edit your personal profile by clicking on your account ID or portrait where applicable, and visit other community members’ profile by clicking their portrait. Information that include in your profile determines how you are presented to the community, and what type of information will be sent to you from the community. There are four tabs in your profile screen: 1. User Profile – allows you to manage your Autel account profile information including: your Autel ID, personal information, MaxiFix points, level, phone number, and register time. 2. Vehicle Selection – used to set up a list of preferred vehicles. The preferred list allows you to limit the choices that display on the “Select Vehicle” list to specific years, and makes. Click “Set Year” or “Set Make” to set your preferred models. 3. Expert Subscriptions – allows you to share your knowledge by alerting you when there is a question related to an indicated area of your expertise. Select the “Expert Subscriptions” tab on the main page to open a menu for identifying your areas of expertise. Your expert subscription can be limited to specific makes, models, years, and engine. You will receive an email whenever a question posted is related to your area(s). Click the link in the email which directs to the question. This lets you quickly respond to questions and build Leaderboard points. 72
MaxiFix Operations Operations 4. Communication – lets you manage your communication preferences. Here you can choose which email notifications you would like to receive from MaxiFix. 6.2.2 My MaxiFix My MaxiFix, the second option on the Navigation Bar along the left side of the screen, opens your personal MaxiFix page. To access the features on My MaxiFix page you can either select from the tabs or use the links on the top of the page:.  Questions – opens a list with links to the opened questions that you have posted to the community  Stuff – opens a list with links to the closed questions and tips that you have contributed to the community.  Follow – opens a list with links to Tips and discussions that you are actively participating in.  Library – provides PID Graphs and/or Waveforms associated with the Tip and the vehicle you have selected. This is a comprehensive collection of test results gathered through actual on-vehicle tests, so you know exactly what to look for. Data graphs and scope waveforms provide a point of reference to help you verify faulty parts.  Ask the Experts – allows you to post a question to the community.  Enter a Tip – allows you to share your personal repair experience with the community Tap My MaxiFix on the Navigation Bar along the left side of the screen, to display all questions and tips that you have contributed to the community.  To ask a question on MaxiFix 1. If not already done, tap Select Vehicle on the Header Bar and enter the identifying attributes of the vehicle you would like to ask a question about. 2. Tap My MaxiFix on the Navigation Bar along the left-side of the screen to open the My MaxiFix page. 3. On the My MaxiFix page find Ask the Experts; tap this link to open the Question Page. 73
MaxiFix Operations Operations The Question page has 4 sections:  Subject – this is where you enter a brief subject for the question.  Symptoms – this is where you describe how the vehicle is behaving.  Diagnostics Steps Performed/Parts Replaced – include any previous diagnostic tests that you performed, including the results of the tests. Also list any parts that were replaced during previous diagnostic work.  Your Question – ask a clear and concise question that you want to ask the community. Be sure to be descriptive and concise when asking your question. 4. Tap the Cancel button at the right-side bottom of the page to cancel your question and return to the My MaxiFix page. Or, 5. Tap the Submit button at the right-side bottom of the page to ask your question of the community. “Best Answer” Rating Rating answers is one way to give back to the MaxiFix community. The member that originally asked the question gets to select a “Best Answer” from all of the responses. The community member that provided the Best Answer to a question is recognized for their contribution. About Best Answer:  Only one answer can be rated “Best Answer”.  Only the MaxiFix community member who asked the question can rate the answers. Close a Question Questions that you post to the community need to be closed once the vehicle repair issue has been resolved. You are encouraged to document the fix, and an important part doing so is providing information on what actually fixed the vehicle so that other MaxiFix community members can use the information as well. To close a question you need to pick the “Best Answer” from the answers at the “Question” page first. It is strongly recommended to share your fix 74
MaxiFix Operations Operations experience before closing a question. Your question will be converted to a MaxiFix Community Tip after closing. Create a Tip If you have a new fix to a specific vehicle problem please share! Create a MaxiFix community Tip to share your expertise with other technicians in the MaxiFix community. A MaxiFix community Tip is a short yet complete description of the repair for a particular vehicle problem.  To create a new MaxiFix Tip 1. Select My MaxiFix from the Navigation Bar. 2. Tap Select Vehicle from the Header Bar and enter the identifying attributes of the vehicle you are writing the Tip about. 3. On the My MaxiFix page find Enter a Tip; tap this link to open the Tip Page. 4. Enter the Tip Title in the Title field. 5. Compose your Tip in the Content field. Includes as much information as possible, while keeping the information concise and to the point. A Tip should provide accurate information that is easy to read, understand, and follow. 6. Tap the Cancel button at the right-side bottom of the page to cancel your tip and return to the My MaxiFix page. Or, 7. Tap the Submit button at the right-side bottom of the page to contribute your tip to the community. 6.2.3 Search Fix Search Fix, the third option on the Navigation Bar along the left side of the screen, presents search results for the active vehicle. Search results are listed in various categories:  All – includes all search results, including related Questions, Tips, and Real Fixes to your search.  Questions – presents a list of open Question discussed in the community that may be pertinent to your search. 75
MaxiFix Operations Operations  Tips – presents a list of Tips that directly correlate to your search criteria. Select a Tip from the list to open and review the complete Tip.  Real Fixes – presents a list of Tips that have been gathered from actual shop repair orders and are presented in an easy to understand Complaint, Cause, Correction format. 6.2.4 All Questions All Questions, the fourth option on the Navigation Bar along the left side of the screen, presents the latest updated questions and tips in MaxiFix community. There are two tabs available to look up:  Latest Questions – displays a list of latest posted questions. Select a question from the list to join the discussion or submit an answer to contribute your expertise.  Latest Tips – displays a list of latest posted tips. Select a tip from the list to find out the repair advice and tip contributed by a community member. If you find the tip is helpful to solve your repair problem, you can give the tip one “Fixed It!" point by tapping it. You can configure your main screen to display questions only related to the vehicle models you are interested, by clicking the Filter button on the main page of All Questions, and select the desired vehicle models. This filter can be canceled anytime by clicking the Remove All Filters button, and the default setting will be recovered to display questions about all vehicle models. 6.2.5 My Messages My Messages, the fifth option on the Navigation Bar along the left side of the screen, shows a list of message notifications which is relevant to your activities in the Question section. A notification icon will appear on the top-right corner of the “My Messages” tag when you launch the MaxiFix application when there is any new or unread message in the Question section. The number on the notification icon indicates the total number of the new and unread messages. The displayed number will be reduced correspondingly after viewing. The message notification will appear in the following two cases: 1. Your question or answer is replied by other MaxiFix community members. 76
MaxiFix Operations Operations 2. Your answer is rated as the “Best Answer” by the MaxiFix community member who asked the question. Tap My Message, select the message notification you want to read in the list. If your answer is rated as the “Best Answer”, the prompt “Best Answer + 4” will be displayed permanently. Tap Clear to delete all message notifications in the list. 6.2.6 Support Support, the last option on the Navigation Bar along the left side of the screen, opens a page that provides 2 ways to gain support from MaxiFix: 1. A message form to contact the administrator of MaxiFix. 2. A Frequently Asked Questions (FAQ) link that answers the most frequent questions we hear from MaxiFix community members. If you wish to contact the administrator of this site please use the contact form. Select “Support” from the Navigation Bar to open the comment window. To allow the administrator to respond to your question or issue, the following information should be provided:  Your name  A contact email address  A contact phone number 77
Chapter 7 Settings Operations Selecting Settings application opens a setup interface, on which you can adjust default setting and view information about the MaxiSys system. There are eight options available for the MaxiSys system settings:  Unit  Language  Printing Setting  Wired Network  Notification Center  Multitask  About  System Settings 7.1 Operations This section describes the operation procedures for the settings. 7.1.1 Unit This option allows you to adjust the measurement unit for the diagnostic system.  To adjust the unit setting 1. Tap the Settings application on the MaxiSys Job Menu. 2. Tap the Unit option on the left column. 3. Select the required measurement unit, Metric or English. A tick icon will display to the right of the selected unit. 4. Tap the Home button on the top left corner to return to the MaxiSys Job Menu. Or select another setting option for the system setup. 78
Settings Operations Operations 7.1.2 Language This option allows you to adjust the display language for the MaxiSys Elite system.  To adjust the language setting 1. Tap the Settings application on the MaxiSys Job Menu. 2. Tap the Language option on the left column. 3. Select the required language. A tick icon will display to the right of the selected language. 4. Tap the Home button on the top left corner to return to the MaxiSys Job Menu. Or select another setting option for the system setup. 7.1.3 Printing Setting This option allows you to print any data or information anywhere and anytime either via PC network or Wi-Fi. For more information about printing, see 3.3.1 Printing Operation on page 17.  To setup the printer connection 1. Tap the Settings application on the MaxiSys Job Menu. 2. Tap the Printing Setting option on the left column. 3. Tap Print via Network to activate the printing function, which enables the device to send files to the printer through the PC via Wi-Fi or Ethernet connection. 4. Tap the Home button on the top left corner to return to the MaxiSys Job Menu. Or select another setting option for the system setup. 7.1.4 Wired Network This option allows you to enable or disable the wired network connectivity, as well as to perform Ethernet configuration.  To operate Ethernet configuration 1. Tap the Settings application on the MaxiSys Job Menu. 79
Settings Operations Operations 2. Tap the Wired Network option on the left column. 3. Tap the ON/OFF button to enable the Wired Network connection. If the connectivity is enabled the button turns blue, or if disabled the button turns gray. 4. Tap the A○>E A button to the right of the Ethernet Configuration option, a setup window displays. 5. Select a connection type:  DHCP – obtains the LAN IP address automatically  Static IP – allows manual input of IP address 6. If Static IP is selected, you need to enter the IP values manually. NOTE: If you are not sure about the specific IP address values, please contact your network administrator. 7. Tap Save to save the Ethernet configuration setting; or tap Cancel to exit without saving. 8. Tap the Home button on the top left corner to return to the MaxiSys Job Menu. Or select another setting option for the system setup. 7.1.5 Notification Center This option allows you to turn the Notification Center function on or off. The Notification Center function configures the MaxiSys tablet to receive regular on-line messages from the server for system update notifications or other service information via the Internet. It is highly recommended to keep this function on all the time, so you won’t miss out any new update for MaxiSys or event from Autel. Internet access is required for receiving on-line messages.  To enable the Push Message function 1. Tap the Settings application on the MaxiSys Job Menu. 2. Tap the Notification Center option on the left column. 3. Tap the ON/OFF button to enable or disable the Notification Center function. If the function is enabled the button turns blue, or if disabled the button turns gray. 80
Settings Operations Operations 4. Tap the Home button on the top left corner to return to the MaxiSys Job Menu. Or select another setting option for the system setup. When the Notification Center function is turned on, and new messages are received by the MaxiSys device, a notification message displays on the MaxiSys Job Menu. Press on the message bar and drag it down, and the received messages are shown in the list, slide the list up or down to view all if the message list covers more than one screen. Tapping a specific message launches the corresponding application. For example, if you tap on an Update notification message, the Update application will be launched. 7.1.6 Multitask The Multitask option allows you to turn Multitask function on or off. The Multitask feature enables you to browse and navigate more freely among different applications on the MaxiSys system. By simply tapping the Multi Task button, the Multi Task menu displays all bookmarks of the active applications allowing you to switch from one app to another in just 1 second.  To enable the Multitask function 1. Tap the Settings application on the MaxiSys Job Menu. 2. Tap the Multitask option on the left column. 3. Tap the ON/OFF button to enable or disable the Multitask function. If the function is enabled the button turns blue, or if disabled the button turns gray. 4. Tap the Home button on the top left corner to return to the MaxiSys Job Menu. Or select another setting option for the system setup. 7.1.7 About The About option provides information of the MaxiSys Elite diagnostic device regarding the product name, version, hardware, and serial number, etc. 81
Settings Operations Operations  To check the MaxiSys product information in About 1. Tap the Settings application on the MaxiSys Job Menu. 2. Tap the About option on the left column. The product information screen displays on the right. 3. Tap the Home button on the top left corner to return to the MaxiSys Job Menu, or select another setting option for the system setup, after viewing. 7.1.8 System Settings This option provides you a direct access to the Android background system setting interface, on which you can adjust various system settings for the Android system platform, regarding wireless and networks settings, various device settings such as sound and display, as well as system security settings, and check the associated information about the Android system, etc. Refer to Android documentation for additional information. 82
Chapter 8 Shop Manager Operations The Shop Manager application helps you to manage the workshop information, customer information records, and keep test vehicle history records, which can be a great assist in dealing with daily workshop business and improves customer service. There are three main functions available:  Vehicle History  Workshop Information  Customer Manager The operations of these functions of the Shop Manager application are mainly manipulated by the toolbar buttons, which are listed and described in the table below: Table 8-1 Top Toolbar Buttons in Shop Manager Name Button Description Back Returns to the previous screen. Diagnostics Touching this button directs you to the vehicle’s Diagnostics screen to activate a direct test session. Enter Edit Touching this button shows the editing toolbar to print or delete the selected file. Delete Touching this button deletes the selected vehicle record item from the list. Search Quickly locates the vehicle record by entering the vehicle name or test path. Cancel Touching this button to cancel edit or file search. Edit Touching this button allows you to edit information for the displayed file. Add Account Touching this button to create a new customer account file. 83
Shop Manager Operations Vehicle History Name Button Description History Notes Touching this button opens a note form, which allows you to create audio record, attach picture or video, or edit text notes, etc. Vehicle History Touching this button opens the Vehicle History screen which displays the correlated test vehicle records. Done Saves the file when complete editing. 8.1 Vehicle History This function stores records of test vehicle history, including vehicle information and the retrieved DTCs from previous diagnostic sessions, and displays all information in an easy-to-check table list, on which you can view summarized details and manually input other information about the test vehicle and diagnostic loggings, etc. The Vehicle History also provides direct access to the previously tested vehicle and allows you to restart a diagnostic session without the need to do vehicle identification again. Figure 8-1 Sample Vehicle History Screen 1. Top Toolbar Buttons – navigates and makes various controls of the application. 2. Main Section – displays all the vehicle history records information. 84
Shop Manager Operations Vehicle History  To activate a test session for the recorded vehicle 1. Tap the Shop Manager application on the MaxiSys Job Menu. 2. Select Vehicle History 3. Tap the Diagnostics button at the bottom of the thumbnail of a vehicle record item. Or, 4. Select a vehicle record item by tapping the thumbnail. 5. A Historical Test record sheet displays, check the recorded information of the recorded test vehicle, and tap the Diagnostics button on the upper right corner. 6. The vehicle’s Diagnostics screen displays, now a new diagnostic session is activated, see 4.6 Diagnosis on page 37 for detailed instructions on vehicle diagnostic operations. 8.1.1 Historical Test Record The Historical Test record sheet of the tested vehicle is a detailed data form, which includes all general information of the vehicle such as vehicle year, make and model, etc., and the diagnostic trouble codes retrieved from the previous test sessions, as well as other service details which can be added manually by the technician himself. Figure 8-2 Sample Historical Test Record Sheet85
Shop Manager Operations Workshop Information  To edit the Historical Test record sheet 1. Tap the Shop Manager application on the MaxiSys Job Menu. 2. Select Vehicle History. 3. Select the specific vehicle history record thumbnail from the main section. The Historical Test record sheet displays. 4. Tap the Edit button to start editing. 5. Tap on each item to input the corresponding information or add attaching files or images. NOTE: The vehicle VIN number, or license and the customer information account are correlated by default. Adding one of the information will automatically associate the other item in the record sheet, provided that the later one exists. 6. Tap Add to Customer to correlate the Historical Test record sheet to an existing customer account, or add a new associating account to be correlated with the test vehicle record. See 8.3 Customer Manager on page 87 for more information. 7. Tap Done to save the updated record sheet, or tap Cancel to exit without saving. 8.2 Workshop Information The Workshop Information form allows you to edit, input and save the detailed workshop information, such as shop name, address, phone number and other remarks, which, when printing vehicle diagnostic reports and other associated test file, will appear as the header of the printed documents. 86
Shop Manager Operations Customer Manager Figure 8-3 Sample Workshop Information Sheet  To edit the Workshop Information sheet 1. Tap the Shop Manager application on the MaxiSys Job Menu. 2. Select Workshop Information. 3. Tap the Edit button on the top toolbar. 4. Tap on each field to input the appropriate information. 5. Tap Done to save the updated workshop information sheet, or tap Cancel to exit without saving. 8.3 Customer Manager The Customer Manager function allows you to create and edit customer accounts. It helps you to save and organize all customer information accounts that are correlated with the associated test vehicle history records, which is a great support for the arrangement of daily workshop business.  To create a customer account 1. Tap the Shop Manager application on the MaxiSys Job Menu. 2. Select Customer Manager. 3. Tap the Add Account button. An empty information form displays, tap each field to input the appropriate information. NOTE: The items that must be filled are indicated as required fields. 87
Shop Manager Operations Customer Manager 4. Tap the A□+E A photo frame beside the Name chart to add a photo. A sub menu displays, select Take Photo to take a new photo for the account, or select Choose Photo to choose from the existing files. 5. Some customers may have more than one vehicle for service; you can always add new vehicle information to the account to be correlated. Tap Add New Vehicle Information, and then fill in the vehicle information. Tap the A○xE A button to cancel adding. 6. Tap Done to save the account, or tap Cancel to exit without saving.  To edit a customer account 1. Tap the Shop Manager application on the MaxiSys Job Menu. 2. Select Customer Manager. 3. Select a customer account by tapping the corresponding name card. A Customer Information sheet displays. 4. Tap the Edit button on the top toolbar to start editing. 5. Tap on the input field where needs to be altered or supplemented, and enter updated information. 6. Tap Done to save the updated information, or tap Cancel to exit without saving.  To delete a customer account 1. Tap the Shop Manager application on the MaxiSys Job Menu. 2. Select Customer Manager. 3. Select a customer account by tapping the corresponding name card. A Customer Information sheet displays. 4. Tap the Edit button on the top toolbar to start editing. 5. Tap the Delete Customer Information button. A confirmation message displays. 6. Tap OK to confirm the command, and the account is deleted. Tap Cancel to cancel the request. 88
Shop Manager Operations Customer Manager 8.3.1 History Notes The History Notes function allows you to add audio and video records, text notes and photos, to keep multi-media work logs for the associated customer account, which can be very helpful when dealing with repeat customers. Keeping notes for each vehicle serviced for each customer will keep you always on track and well organized in business.  To access History Notes 1. Tap the Shop Manager application on the MaxiSys Job Menu. 2. Select Customer Manager or Vehicle History. 3. Select a customer account by tapping the corresponding name card. A Customer Information sheet displays (if Customer Manager is selected). Or, select a vehicle history record item to open the Historical Test record sheet (if Vehicle History is selected). 4. Tap the History Notes button on the top bar. Now the History Notes screen displays. Figure 8-4 Sample History Notes Screen 1. Functional Buttons – navigates and make various controls of the function 2. Main Section – displays the note list on the left column and the detail information of the selected note on the right column 89
Shop Manager Operations Customer Manager Table 8-2 Function Buttons in History Notes Name Button Description Back Returns to the previous screen. Delete Touching this button deletes the selected note. Search Quickly locates the required note by entering the note title. Cancel Touching this button to cancel edit or file search. Edit Touching this button opens an edit window allowing you to edit notes and attach files. Add Notes Touching this button to add new note in History Notes. Audio Record Performs audio recording and creates audio files. Add Photos Opens the image file for selection, and adds the selected photos to History Notes. Take a Video Records a video and adds the file to History Notes. Take a Photo Takes photos and adds the files to History Notes. Save Saves notes.  To add a note in History Notes 1. Access History Notes. 2. Tap the Add Notes button. An edit window displays. 3. Tap on the Title bar to input a note title. 4. Tap on the blank space below to edit a text note or remark. 5. Select a function button on the top to add files in any form you choose. 6. Tap Save to save the note; tap Discard or Cancel to exit without saving. 90
Chapter 9 Update Operations The internal programming of the MaxiSys Elite Diagnostic System, known as the firmware, can be updated using the Update application. Firmware updates increase the MaxiSys applications’ capabilities, typically by adding new tests, new models, or enhanced applications to the database. The display device automatically searches for available updates for all of the Maxisys components when it is connected to the internet. Any updates that are found can be downloaded and installed on the device. This section describes installing an update to the MaxiSys Elite Diagnostic System firmware. A notification message displays if an update is availaable when the Push Message function is enabled in the Settings application (See 7.1.5 Notification Center on page 80 for details). Figure 9-1 Sample Update Screen 1. Navigation and Controls  Home Button – returns to the MaxiSys Job Menu  Update All – updates all available updates  Search Bar – search specific update item by inputting the file name, for example: a vehicle make 2. Status Bar  Left Side – displays the MaxiSys device model information and serial number  Right Side – displays an update progress bar indicating the completion status 91
Update Operations Operations 3. Main Section  Left Column – displays vehicle logos and update firmware version information; tap the About button displays a function list in PDF showing more details about the firmware  Middle Column – displays a brief introduction about the new changes to the firmware operation or capabilities. Tap A○iE A button to open an information screen to view more details, and tap the dim area around to close the window.  Right Column – according to the operation status of each firmware item, the button displays differently. a) Tap Update to update the selected item. b) Tap Pause to suspend the updating procedure. c) Tap Continue to go on updating the suspended update.  To update the firmware 1. Power up the MaxiSys Display Tablet, and ensure that it is connected to a power source and with steady internet connection. 2. Tap the Update application button from the MaxiSys Job Menu; or tap the update notification message when received one. The Update application screen displays. 3. Check all available updates:  If you decide to update all the items, tap the Update All button.  If you only want to update some individual items, tap the Update button on the right column of the specific item. 4. Tap the Pause button to suspend the updating process. When you tap Continue to renew the update, the updating process will resume from the break point. 5. When the updating process is completed, the firmware will be installed automatically. The new version will replace the original version if there is one. 92
Chapter 10 VCI Manager Operations This application allows you to pair up the MaxiSys Display Tablet with J2534 Programming Device, and to check the communication status. Figure 10-1 Sample VCI Manager Screen 1. Connection Mode – there are three connection modes available for selection. The connection state is displayed alongside.  Bluetooth Paring – when paired to a Bluetooth device, the connection state displays as Paired; otherwise it displays as Unpaired.  Wired Network Connection – when connected to a Local Area Network, the connection status displays as Connected; otherwise it displays as Disconnected.  Update (for VCI software only) – Update VCI software via internet through the MaxiSys tablet network using USB connection  Select a connection mode to manage and set up connection. 2. Settings – this section allows you to manage wireless pairing or set up network connection.  Bluetooth Setting – searches and displays the type and a partial serial 93
VCI Manager Operations Bluetooth Pairing number for all of the devices available for pairing. Tap a required device to start pairing. The Bluetooth status icon displayed to the left of the device name indicates the received signal strength.  Ethernet Setting – allows you to perform network configuration. 10.1 Bluetooth Pairing The VCI device needs to be either connected to a vehicle or to an available power source, so that it is powered up during the synchronization procedure. Make sure the MaxiSys Display Tablet has a charged battery or is connected to an AC/DC power supply.  To pair the VCI device with the Display Tablet 1. Power on the MaxiSys Display Tablet. 2. Connect the 26-pin end of the data cable to the J2534 ECU Programming Device’s vehicle data connector. 3. Connect the 16-pin end of the data cable to the vehicle data link connector (DLC). 4. Tap the VCI Manager application on the MaxiSys Job Menu of the display tablet. 5. Select Bluetooth from the connection mode list. 6. Tap the Scan button at the top right corner. Now the device starts searching for available pairing units. 7. Depending on the VCI type you use, the device name may display as Maxi suffixed with a serial number. Select the required device for pairing. 8. When paring is successfully done, the connection status displayed to the right of the device name is shown as Paired. 9. Wait a few seconds, and the VCI button on the system Navigation bar at the bottom of the screen shall display a green tick icon, indicating the display tablet is connected to the VCI device.10. Tap the paired device again to unpair it. 94
VCI Manager Operations Bluetooth Pairing 11. Tap the Back button on the top left to return to the MaxiSys Job Menu. NOTE: A VCI device can be paired to only one Display Tablet each time, and once it’s been paired, the device will not be discoverable for any other unit. 10.2 Wired Network Connection The Wired Network is applied for connecting the MaxiSys Display Tablet with J2534 ECU Programming Device or to an existing LAN. This section describes connecting the display tablet with the J2534 ECU Programming Device through the Ethernet cable. The J2534 ECU Programming Device needs to be either connected to a vehicle or to an AC/DC power source, so that it is powered up when communicating with the display tablet. Make sure the MaxiSys Display Tablet has a charged battery or is connected to an AC/DC power supply.  To connect the display tablet with the J2534 ECU Programming Device through wired network 1. Power on the MaxiSys Display Tablet. 2. Connect the 26-pin end of the data cable to the J2534 ECU Programming Device’s vehicle data connector. 3. Connect the 16-pin end of the data cable to the vehicle data link connector (DLC). 4. Connect the MaxiSys Display Tablet to the programming device with the accompanied Ethernet serial cable. 5. Tap the VCI Manager application on the MaxiSys Job Menu of the display tablet. 6. Select Wired Network from the connection mode list. Now the Ethernet Setting interface displays. 7. Select a connection type:  DHCP – obtains the LAN IP address automatically  Manual – allows you to enter IP address manually8. If Manual is selected, you need to set the IP address on your own. 95
VCI Manager Operations Bluetooth Pairing NOTE: If you are not sure about the specific IP address values, please contact your network administrator. 9. Tap Apply to set up the wired network connection. 10. Tap the Back button on the top left to return to the MaxiSys Job Menu. When the wired network is successful connected, the connection status is displayed as Connected, and the two status lights at the corners alongside the Ethernet Ports on the display tablet illuminate. The solid amber light indicates steady connection, and the flashing green light indicates active communication, between the units. The VCI navigation button at the bottom bar shall display a green tick icon after a few seconds, indicating the MaxiSys Elite diagnostic platform is ready to perform vehicle diagnosis. 10.3 Update Before updating the VCI software, please make sure the MaxiSys tablet network connection is stable.  To update the VCI device software 1. Power on the MaxiSys display tablet. 2. Connect the VCI device to MaxiSys tablet via USB. 3. Tap the VCI Manager application on the MaxiSys Job Menu of the display tablet. 4. Select Update from the connection mode list. 5. The current version number and the latest version number of the VCI software will be displayed after a few seconds, click Update Now to update the VCI software if available. 96
Chapter 11 Remote Desk Operations The Remote Desk application launches the TeamViewer Quick Support program, which is a simple, fast and secure remote control interface. You can use the application to receive ad-hoc remote support from Autel’s support centre, colleagues, or friends, by allowing them to control your MaxiSys tablet on their PC via the TeamViewer software. 11.1 Operations If you think of a TeamViewer connection as a phone call, the TeamViewer ID would be the phone number under which all TeamViewer Clients can be reached separately. Computers and mobile devices that run TeamViewer are identified by a globally unique ID. The first time the Remote Desk application is started, this ID is generated automatically based on the hardware characteristics and will not change later on. Make sure the MaxiSys Display Tablet is connected to the Internet before launching the Remote Desk application, so that the Display Tablet is accessible to receive remote support from the third party. Figure 11-1 Sample Remote Desk Screen 97
Remote Desk Operations Operations  To receive remote support from a partner 1. Power on the MaxiSys Display Tablet. 2. Tap the Remote Desk application on the MaxiSys Job Menu. The TeamViewer interface displays and the device ID is generated and shown. 3. Your partner must install the Remote Control software to his/her computer by downloading the TeamViewer full version program online (http://www.teamviewer.com), and then start the software on his/her computer at the same time, in order to provide support and take control of the display tablet remotely. 4. Provide your ID to the partner, and wait for him/her to send you a remote control request. 5. A popup displays to ask for your confirmation to allow remote control on your device. 6. Tap Allow to accept, or tap Deny to reject. Refer to the associated TeamViewer documents for additional information. 98
Chapter 12 Support Operations This application launches the Support platform which synchronizes Autel’s on-line service base station with the MaxiSys display tablet. In order to synchronize the device to your on-line account, you need to register the product through the Internet when you use it for the first time. The Support application is connected to Autel’s service channel and on-line communities which provides the quickest way for problem solutions, allowing you to submit complaints or sent help requests to obtain direct services and supports. 12.1 Product Registration In order to get access to the Support platform and obtain update and other services from Autel, you are required to register the MaxiSys Elite Diagnostic Device the first time you use it.  To register the diagnostic device 1. Visit the website: http://pro.autel.com. 2. On the Sign In page, input your account ID and other information to log in, if you already have an account. 3. If you are a new member to Autel and do not have an account yet, click the Create Autel ID button on the left side. 4. Enter the required information in the input fields, read through Autel’s Terms and Conditions and tick on Agree, and then click Create Autel ID at the bottom to continue. 5. The online system will automatically send a confirmation email to the registered email address. Validate your account by clicking the link provided through the mail. A product registration screen opens. 6. Find out the device’s serial number and password from the About section of the Settings application on the MaxiSys Display Tablet. 7. Select the product model of your device, enter the product serial number and password on the Product Registration screen, and click Submit to complete the registration procedure. 99
Support Operations Support Screen Layout 12.2 Support Screen Layout The Support application interface is navigated by 4 simple buttons on the top navigation bar, operation of each is described below in turn from left to right:  Home Button – returns to the MaxiSys Job Menu.  Back – returns to the previous screen, each press takes you back one step.  Forward – each press moves forward one screen until you’ve reached the last screen visited.  Refresh – reload and update the screen. Figure 12-1 Sample Support Application Screen The main section of the Support screen is divided into two sections. The narrow column on the left is the main menu; selecting one subject from the main menu displays the corresponding functional interface on the right.100
Support Operations My Account 12.3 My Account The My Account screen displays the comprehensive information of the user and the product, which is synchronized with the on-line registered account, including User Info, Device Info, Update Info and Service Info. Personal Info The User Info and Device Info are both included under the Personal Info section.  User Info - displays detailed information of your registered on-line Autel account, such as your Autel ID, Name, Address and other contact information, etc.  Device Info – displays the registered product information, including the Serial Number, Registration Date, Expire Date, and Warranty Period. Update Info The Update Info section displays a detailed record list of the product’s software update history, including the product serial number, software version or name, and the update time. Service Info The Service Info section displays a detailed record list of the device’s service history information. Every time the device has been sent back to Autel for repair, the device’s serial number and the detailed repair information, such as the fault type, changed components, or system reinstallation, etc., will be recorded and updated to the associated online product account, which will be synchronized to the Service Info section. 12.4 User Complaint The User Complaint screen allows you to establish a new complaint case, as well as to view historical complaint records. 101
Support Operations User Complaint Screen Layout Figure 12-2 Sample Complaint Screen The User Complaint screen consists of two parts. 1. Option Bar  Period Filter – displays only the complaint records within the defined period on the list  Status Filter – displays the corresponding complaint records according to the selected case status  New Complaint Button – starts a new complaint case. 2. Complaint List The complaint list normally displays all the complaint records of all time and all status by default. The summary information for each complaint item includes the Subject Name, Ticket ID, User’s Account ID, Date, and the Case Status. There are four kinds of the case status:  Open – indicates the complaint case has been started but not processed yet  Suspended – indicates the complaint case is being processed 102
Support Operations User Complaint  Waiting Customer Reply – indicates the complaint has been replied by the service personnel, and requires feedback from the customer  Closed – indicates the complaint case has been processed, solved, and ended  To view the detailed complaint session, tap the A○>E A button on the right side of the case item.  To establish a new complaint session 1. Register the product online. 2. Tap the Support application on the MaxiSys Job Menu. The device information is automatically synchronized with the online account. 3. Tap Complaint on the Main Menu. 4. Tap the New Complaint button at the upper right corner. A selection menu with a category of service channels displays. 5. Select your target service channel and click Next to continue. A standard complaint form displays, on which you are allowed to enter detailed information, such as personal information, vehicle information, and device information, you can also attach image or PDF files with the form. 6. Enter in each input field the appropriate information, in order to settle the complaint more efficiently, it is recommended to fill out the complaint form as detailed as possible. 7. Select the required processing time on the last section according to the urgency of the case. 8. Tap Submit to send the completed form to Autel’s online service center, or tap Reset to refill it. The submitted complaints will be carefully read and handled by the service personnel, and the respond speed may depend on the processing time you’ve required.  To make a reply in a complaint session 1. Register the product online. 2. Tap the Support application on the MaxiSys Job Menu. The device information is automatically synchronized with the online account.103
Support Operations Data Logging 3. Tap Complaint on the Main Menu. 4. Select an existing complaint case item on the record list by tapping the A○>E A button on its right side. The screen displays the complaint session details. 5. Tap the Post Reply button on the upper right side after viewing, to make a reply. An edit screen displays. 6. Input the content in the input field, and if necessary, upload an attaching file. 7. Tap Submit to post the reply. 8. Tap the States selection drop-down menu to reset a case state. 9. Tap the Update button to commit the newest update. 12.5 Data Logging The Data Logging section keeps records of all sent or unsent (saved) data loggings on the diagnostic system. The support personnel receive and process the submitted reports through the Support platform, and send back problem solutions within 48 hours to the corresponding Data Logging session, on which you are also allowed to have a direct conversation with the support personnel. Figure 12-3 Sample Data Logging Screen 104
Support Operations Communities  To make a reply in a Data Logging session 1. Tap on the Sent tag to view a list of submitted data loggings. 2. Select a specific item to view the latest update of the processing progress. 3. Tap on the input field at the bottom of the screen, and enter the texts. Or tap the Audio button to record a voice message, or camera button to take a picture. 4. Tap Send to deliver your message to the technical center. 12.6 Communities The Communities section launches and synchronizes with the Technical Forums on Autel’s official website www.autel.com, where you are allowed to discuss technical topics or share information with, as well as ask for technical advices or offer technical supports to all other members in Autel’s online support communities. Figure 12-4 Sample Communities Home Screen  To start a discussion 1. Tap Start a discussion on the Communities Home screen. A list of the major forums is displayed. 105
Support Operations Communities 2. Select a desired group according to the subject you are about to discuss. For example, if you are going to ask a question about the MaxiSys Elite tablet, tap MaxiSys to start a discussion. 3. Enter your topic and the discussion content in the appropriate input field. 4. Select a category or edit tags for the discussed post. This will help other members with similar interest to find your post. 5. Tap OK to submit the post.  To join and reply to a discussion post 1. Select a forum group that you are interested in, whether by the product or the features, on the Communities Home screen. A list of the latest posts is displayed. 2. Select a specific category on the Categories menu to better pinpoint the topics you are most interested with. 3. Tap the A○>E A button on the right side of the topic item to view the discussion. The posts contents are displayed. 4. Browse through all the posts by sliding the screen up and down. Tap Go to original post when reaching the end of the discussion to return to the first post. 5. Tap Reply to reply a specific post, or tap Reply to original post to join and continue the whole discussion. 6. Enter your comment in the input field, and tap OK to submit your post. User Profile The User Profile section allows you to set personal Avatar, check your member status and other information, as well as to review your personal posts in the communities. Tap the Avatar image on the Communities screen to open the User Profile.106
Support Operations Training Channels Figure 12-5 Sample User Profile Screen  Profile – displays the user’s personal information and member status. The Related links allow you to check the Top Users (ranked according to their points and levels) in the communities, as well as to find out other online users.  Avatar – allows you to select an image to set as your personal Avatar to be displayed in the communities.  Stuff – displays all the discussions you’ve posted at various forums in a list. 12.7 Training Channels The Training section provides quick links to Autel’s online video accounts. Select a video channel by the language to see all the available online tutorial videos from Autel for various technical supports, such as product usage techniques and vehicle diagnostics practice, etc, may be available for your interests. 107
Support Operations FAQ Database 12.8 FAQ Database The FAQ section provides you comprehensive and abundant references for all kinds of questions frequently asked and answered about the use of Autel’s online member account, and shopping and payment procedures.  Account – displays questions and answers about the use of Autel’s online user account.  Shopping & Payment – displays questions and answers about online product purchase and payment methods or procedures. 108
Chapter 13 Training Operations The Training application provides and allows you to play various tutorial videos stored on the device. The stored training materials mainly consists of product usage tutorials and vehicle diagnostic training videos, all produced by top-notch technicians and product experts. The application also allows you to download or watch more associated videos online, by providing quick links to Autel’s online video database. Figure 13-1 Sample Training Application Screen 1. Navigation Buttons – allows you to navigate the application interface.  Home Button – returns to the MaxiSys Job Menu  Online Button – opens the quick link page and provides access to Autel’s online video database  All Button – displays all available video files  Product Button – displays video files for product usage tutorial  Diagnostic Button – displays video files for vehicle diagnostic training class 109
Training Operations Operations 2. Main Section – displays the available video files for watching  To play a video 1. Tap the Support application on the MaxiSys Job Menu. The Training application screen displays. 2. Select a video file from the main section. 3. Tap the Play button on the left side. 4. Select a Player from the popup window if necessary. Now you can watch the video, it is played in full screen mode.110
Chapter 14 Quick Link Operations The Quick Link application provides you with convenient access to Autel’s official website and many other well-known sites in automotive service, which offers you abundant information and resources, such as technical help, knowledge base, forums, training, and expertise consultations, etc. Figure 14-1 Sample Quick Link Screen  To open a quick link 1. Tap the Quick Link application on the MaxiSys Job Menu. The Quick Link application screen displays. 2. Select a website thumbnail from the main section. The Chrome browser is launched and the selected website is opened. 3. Now you can start exploring the website!111
Chapter 15 Digital Inspection Operations The Digital Inspection application configures the MaxiSys Elite Diagnostic Device to operate as a digital video scope by simply connecting the tablet to a Digital Inspection Camera. This function allows you to examine difficult-to-reach areas normally hidden from sight, with the ability to record digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure in a safe and quick way. WARNINGS & IMPORTANTS: Follow these instructions to reduce the risk of injury from electric shock, entanglement and other causes and prevent tool damage.  Do not place the imager head and cable into anything or anywhere that may contain a live electric charge or moving parts, which increases the risk of electric shock or entanglement injuries.  Do not use the imager head cable to modify surroundings, clear pathways or clogged areas.  When inspection is completed, carefully withdraw the imager head cable from the inspection area.  The imager head cable were waterproof to a depth of 3m (10’), greater depths may cause leakage into the imager head cable and cause electric shock or damage the tool.  The working temperature of the imager head is between 32 °F (0 °C) and 113 °F (45 °C). Check-Ups:  FOR AUTOMOBILES: Ensure the automobile is not running during inspection. Metal and liquid under the hood may be hot. Don’t get oil or gas on the imager head.  FOR PIPES: If you suspect a metal pipe could contain an electric charge, have a qualified electrician to check the pipe before using.  FOR WALLS: For inspecting the inside walls, be sure to shut off the circuit breaker to the whole house before using the tool.  WORK AREA: Ensure the work area has sufficient light. 112
Digital Inspection Operations Additional Accessories 15.1 Additional Accessories The Digital Inspection Camera and its fittings are the additional accessories. Both sizes (8.5 mm and 5.5 mm) of the imager head are optional and available for purchase along with the standard MaxiSys Elite tool kit.  Digital Inspection Camera Figure 15-1 Digital Inspection Camera  Removable Imager Head Cable – connects to the tool when performing digital inspections for image and video viewing  Handgrip – ergonomically designed handle for comfortable grips and agile operation  USB Cable – connects the Digital Inspection Camera to MaxiSys tablet 113
Digital Inspection Operations Additional Accessories  Imager Head Accessories Figure 15-2 8.5mm Imager Head Accessories 1. Magnet – picks up small metal objects, such as dropped rings or screws 2. Hook – unclogs obstacles and picks up wires in the pipes or confined areas 3. Mirror – helps to look around corners and see the unreachable areas Figure 15-3 5.5mm Imager Head Accessories 1. Mirror – helps to look around corners and see the unreachable areas 2. Magnet - picks up small metal objects, such as dropped rings or screws  Accessory Assembly For 8.5mm Imager Head The three accessories, including the Magnet, Hook, and Mirror (Figure 15-2), can be attached to the Imager Head with the same manner described below: 114
Digital Inspection Operations Additional Accessories 1. Hold the accessory and the imager head. 2. Slip the end of the accessory over the imager head and then fix the accessory. For 5.5mm Imager Head The two accessories, including the Magnet and Mirror (Figure 15-3), can be attached to the Imager Head with the same manner described below: 1. Hold the accessory and the imager head.115
Digital Inspection Operations Operations 2. Screw the thread part of the accessory over the imager head to fix the accessory. 15.2 Technical Specifications Item Description Optimal Viewing Distance 1" to 14" (2.54cm to 35.56cm) with 8.5mm diameter imager head 3/8" to 12" (0.95cm to 30cm) with 5.5mm diameter imager head Lighting Fully adjustable LED Image Capture JPG images (640x480) AVI videos (320 x 240) Operating Temperature -10°C to 55°C (ambient) Storage Temperature -20°C to 70°C (ambient) Waterproof Imager head and cable to 3m (10') Weight 0.3kg with 8.5mm diameter imager head 0.2kg with 5.5mm diameter imager head 15.3 Operations Before performing the Digital Inspection application, the Imager Head Cable must be connected to the MaxiSys display tablet through the USB port. Install the correct imager head accessories for use in the appropriate application. 116
Digital Inspection Operations Operations NOTE: When in operation, the imager head cable can be bent into a certain shape. This may help you operate the cable into confined areas.  To take pictures using the Digital Inspection application 1. Connect the Imager Head Cable to the USB port on the top side of the MaxiSys Display Tablet. 2. If not already done, power up the MaxiSys Display Tablet. 3. Tap the Digital Inspection application on the MaxiSys Job Menu. The Digital Inspection application interface displays, showing a camera operating screen. The default camera is now the Imager head. 4. Select the camera icon at the lower right corner to take photos. 5. Focus the image to be captured in the view finder by adjusting and properly locating the imager head cable. 6. Tap the blue ring on the operating screen. The view finder now shows the captured picture and auto-saves the taken photo. 7. Tap the thumbnail image on the top right corner of the screen to view the stored image, slide the screen left and right to view the images one by one. 8. Tap on the selected image and the edit toolbar instantly displays. 9. Tap the appropriate button to share, delete, or edit the image. 10. Tap the Back or Home button on the Navigation bar at the bottom of the screen to exit the Digital Inspection application.  To record a video using the Digital Inspection application 1. Connect the Imager Head Cable to the USB port on the top side of the MaxiSys Display Tablet. 2. If not already done, power up the MaxiSys Display Tablet. 3. Tap the Digital Inspection application on the MaxiSys Job Menu. The Digital Inspection application interface displays, showing a camera operating screen. The default camera is now the Imager head. 117
Digital Inspection Operations Operations 4. Select the video icon at the lower right corner to record a video. 5. Properly locate the imager head cable to focus the inspection scene for recording. 6. Tap the red ring on the operating screen to start recording. 7. Tap the red circle again to stop recording. The recorded video is automatically saved to the system Gallery. 8. Tap the thumbnail image on the top right corner to review the recorded video. 9. Tap the Play button to play the video. 10. Tap on the selected video and the edit toolbar instantly displays. 11. Tap the appropriate button to share, delete, or edit the video. 12. Tap the Back or Home button on the Navigation bar at the bottom of the screen to exit the Digital Inspection application.  To configure various settings for the work mode of the imager head 1. Tap button at the bottom edge of the circle. 2. Select each item to make appropriate adjustments. For more tips and detailed information about the camera application, please refer to associated Android documentations.118
Chapter 16 Maintenance and Service To ensure that the MaxiSys Elite diagnostic tablet and the combined VCI unit perform at their optimum level, we advise that the product maintenance instructions covered in this section is read and followed. 16.1 Maintenance Instructions The following shows how to maintain your devices, together with precautions to take.  Use a soft cloth and alcohol or a mild window cleaner to clean the touch screen of the tablet.  Do not use any abrasive cleansers, detergent, or automotive chemicals to the tablet.  Maintain the devices in dry conditions and keep them within normal operating temperatures.  Dry your hands before using the tablet. The touch screen of the tablet may not work if the touch screen is moist, or if you tap the touch screen with wet hands.  Do not store the devices in humid, dusty or dirty areas.  Check the housing, wiring, and connectors for dirt and damage before and after each use.  At the end of each work day, wipe the device housing, wiring, and connectors clean with a damp cloth.  Do not attempt to disassemble your tablet or the VCI unit.  Do not drop or cause severe impact to the devices.  Use only authorized battery chargers and accessories. Any malfunction or damage caused by the use of unauthorized battery charger and accessories will void the limited product warranty.  Ensure that the battery charger does not come in contact with conductive objects.  Do not use the tablet beside microwave ovens, cordless phones and some medical or scientific instruments to prevent signal interference. 119
Maintenance and Service Troubleshooting Checklist 16.2 Troubleshooting Checklist A. When the display tablet does not work properly:  Make sure the tablet has been registered online.  Make sure the system software and diagnostic application software are properly updated.  Make sure the tablet is connected to the Internet.  Check all cables, connections, and indicators to see if the signal is being received. B. When battery life is shorter than usual:  This may happen when you are in an area with low signal strength. Turn off your device if is not in use. C. When you cannot turn on the tablet:  Make sure the tablet is connected to a power source or the battery is charged. D. When you are unable to charge the tablet:  Your charger maybe out of order. Contact your nearest dealer.  You may be attempting to use the device in an overly hot/cold temperature. Try changing the charging environment.  Your device may have not been connected to the charger properly. Check the connector. NOTE: If your problems persist, please contact Autel’s technical support personnel or your local selling agent. 16.3 About Battery Usage Your tablet is powered by a built-in Lithium-ion Polymer battery. This means that, unlike other forms of battery technology, you can recharge your battery while some charge remains without reducing your tablet’s autonomy due to the “battery memory effect” inherent in those technologies. DANGER: The built-in Lithium-ion Polymer battery is factory replaceable only; incorrect replacement or tampering with the battery pack may cause an explosion.120
Maintenance and Service About Battery Usage  Do not use a damaged battery charger.  Do not disassemble or open crush, bend or deform, puncture or shred.  Do not modify or remanufacture, attempt to insert foreign objects into the battery, expose to fire, explosion or other hazard.  Make sure to use the charger and USB cables only that come together in the package. If you use the other charger and USB cables, you might incur malfunction or failure of the device.  Only use the charging device that has been qualified with device per the standard. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard.  Avoid dropping the tablet. If the tablet is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection.  The closer you are to your network’s base station, the longer your tablet usage time because less battery power is consumed for the connection.  The battery recharging time varies depending on the remaining battery capacity.  Battery life inevitably shortens over time.  Since over charging may shorten battery life, remove the tablet from its charger once it is fully charged. Unplug the charger, once charging is complete.  Leaving the tablet in hot or cold places, especially inside a car in summer or winter, may reduce the capacity and life of the battery. Always keep the battery within normal temperatures. 16.4 Service Procedures This section introduces information for technical support, repair service, and application for replacement or optional parts. Technical Support If you have any question or problem on the operation of the product, please:  Call 1-855-288-3587/1-855-AUTELUS (North America), or 0086-755-86147779 (China). 121
Maintenance and Service Service Procedures  Contact the local distributer or agent.  Visit our website http://pro.autel.com or www.autel.com. Repair Service If it becomes necessary to return your device for repair, please download the repair service form from www.autel.com, and fill in the form. The following information must be included:  Contact name  Return address  Telephone number  Product name  Complete description of the problem  Proof-of-purchase for warranty repairs  Preferred method of payment for non-warranty repairs NOTE: For non-warranty repairs, payment can be made with Visa, Master Card, or with approved credit terms. Send the device to your local agent, or to the below address: 6th-10th Floor, Building B1, Zhiyuan, Xueyuan Road, Xili, Nanshan, Shenzhen, 518055, China Other Services You can purchase the optional accessories directly from Autel’s authorized tool suppliers, and/or your local distributor or agent. Your purchase order should include the following information:  Contact information  Product or part name  Item description  Purchase quantity122
Chapter 17 Compliance Information FCC ComplianceThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. SAR: The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to antenna should be minimized.123
Chapter 18 Warranty 12-Month Limited Warranty Autel Intelligent Technology Corp., Ltd. (the Company) warrants to the original retail purchaser of this MaxiSys Elite Diagnostic Device, that should this product or any part thereof during normal consumer usage and conditions, be proven defective in material or workmanship that results in product failure within twelve (12) months period from the date of delivery, such defect(s) will be repaired, or replaced (with new or rebuilt parts) with Proof of Purchase, at the Company’s option, without charge for parts or labor directly related to the defect(s). The Company shall not be liable for any incidental or consequential damages arising from the use, misuse, or mounting of the device. Some states do not allow limitation on how long an implied warranty lasts, so the above limitations may not apply to you. This warranty does not apply to: a) Products subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation or repair or improper storage; b) Products whose mechanical serial number or electronic serial number has been removed, altered or defaced; c) Damage from exposure to excessive temperatures or extreme environmental conditions; d) Damage resulting from connection to, or use of any accessory or other product not approved or authorized by the Company; e) Defects in appearance, cosmetic, decorative or structural items such as framing and non operative parts. f) Products damaged from external causes such as fire, dirt, sand, battery leakage, blown fuse, theft or improper usage of any electrical source. IMPORTANT: All contents of the product may be deleted during the process of repair. You should create a back-up copy of any contents of your product before delivering the product for warranty service.124

Navigation menu