Authinx HR13A PalmPad Remote Control User Manual HR13A IS pmd

Authinx Inc. PalmPad Remote Control HR13A IS pmd

USERS MANUAL

X10 Wireless Technology, Inc. LIMITED 1-YEAR WARRANTYX10.com, a division of X10 Wireless Technology, Inc. (X10) warrants X10 products to befree from defective material and workmanship for a period of one (1) year from the originaldate of purchase at retail. X10 agrees to repair or replace, at it’s sole discretion, a defectiveX10 product if returned to X10 within the warranty period and with proof of purchase.If service is required under this warranty:1. Call 1-800-675-3044 or visit www.x10.com, or e-mail sales@x10.com to obtain aReturn Merchandise Authorization (RMA) number.2. Return the defective unit postage prepaid to X10 (see address on back).3. Enclose a check for $4.00 to cover postage and handling.4. Enclose a dated proof of purchase.5. X10 is not responsible for shipping damage. Units to be returned should be packedcarefully.Please visit www.x10.com/warrantyto complete your on-line warranty registration. Thank you.For help or more information on setup, please visit: www.x10.com/supportInstallation and operating instructions for HR13A PalmPadThe HR13A PalmPad Remote Control sends Wireless RadioFrequency (RF) signals to an X10 Transceiver (RR501 or TM751)or any X10 security system base receiver. The receiver then passesthe signals onto your house wiring to control lights or appliancesaround your home. You plug lights and appliances into X10 Modules(sold separately). The PalmPad also works with the CM15AActiveHome Pro Two-Way Computer Interface to initiate macros(routines) so you can set up a “coming home” routine which isinitiated when you press a button on the PalmPad.1. Install 4 AAA alkaline batteries (sold separately) in the PalmPad’sbattery compartment.2. Use a dime to set the Housecode dial to match the X10 Modulesand Transceiver you want to control.3. Plug in an X10 Transceiver (RR501 or TM751, sold separately).4. Set the Palm Pad’s slide switch to 1-8 to control X10 Modulesset to Unit Codes 1 thru 8.5. Set the slide switch to 9-16 to control X10 Modules 9 thru 16.6. Press the corresponding ON or OFF button to turn X10 Moduleson and off.7. To brighten or dim lights connected to X10 Lamp Modules andWall Switch Modules, first press the corresponding numberbutton, then press the UP or DOWN (blue) buttons.HR13A-12/05F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THEFCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWOCONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFULINTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANYINTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAYCAUSE UNDESIRED OPERATION. NOTE: NO CHANGES ORMODIFICATIONS MAY BE MADE TO THE UNITS. ANY CHANGESMADE TO THE UNITS WILL VOID THE USER'S AUTHORITY TOOPERATE THE EQUIPMENT.

Navigation menu