Authinx OR14A Remote Control Transmitter User Manual OR14A IS pmd

Authinx Inc. Remote Control Transmitter OR14A IS pmd

Exhibit D Users Manual per 2 1033 b3

Set Up and Operating Instructions forRemote Control Model OR14A(Part # 5000026900)Install batteries:Open the battery compartment on the back of the remote and insert 2 AAA alkaline batteries (notsupplied). Observe polarity.OperationPress TV, DVD, or Web to access desired function. Follow the on-screen prompts and select help fromthe on-screen menu for more information.F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATIONIS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSEHARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCERECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.This equipment generates and uses radio frequency energy, and if not installed and used properly, that is, instrict accordance with the manufacturers instructions, may cause interference to radio and televisionreception. It has been type tested and found to comply with the limits for remote control security devicesin accordance with the specifications in Sub-Part B of Part 15 of FCC Rules, which are designed toprovide reasonable protection against such interference in a residential installation. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does cause interferenceto radio or television reception, which can be determined by unplugging the equipment, try to correct theinterference by one or more of the following measures.o Reorient the antenna of the radio/TV experiencing the interference.o Relocate the product with respect to the radio/TV.o Move the product away from the radio/TV.o Plug the product into an outlet on a different electrical circuit from the radio/TV experiencingthe interference. If necessary, consult your local dealer for additional suggestions.NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADE TO THE UNITS. ANYCHANGES MADE TO THE UNITS WILL VOID THE USER'S AUTHORITY TO OPERATETHE EQUIPMENT.ATI Technologies, Inc.,33 Commerce Valley Dr. E,Thornhill, Ont, Canada L3T 7N6 OR14A-7/04

Navigation menu