Authinx UR28A User Manual UR28Ainst pm6

Authinx Inc. UR28Ainst pm6

manual

Download: Authinx UR28A User Manual UR28Ainst pm6
Mirror Download [FCC.gov]Authinx UR28A User Manual UR28Ainst pm6
Document ID28343
Application IDQD1WWebNR395MySXEse9ug==
Document Descriptionmanual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize0.51kB (6350 bits)
Date Submitted1999-03-19 00:00:00
Date Available1999-04-23 00:00:00
Creation Date1999-02-26 13:30:22
Producing SoftwareAcrobat Distiller 3.01 for Windows
Document Lastmod0000-00-00 00:00:00
Document TitleUR28Ainst.pm6
Document CreatorPageMaker 6.0
Document Author: daverye

Set Up and Operating Instructions for Remote Control Model UR28A
Home Control - When this button is pressed, the remote control is set to RF mode. The remote can then be used to
control X-10 RF home control modules.
To Setup for Home Control:
Plug in an X-10 Transceiver (sold separately) and set it to Housecode A. You can control it and other X-10 modules (set
to Housecode A) as follows:
1. Press and release the Home Control button.
2. Use the number buttons to enter the Unit Code number of the chosen module. (You do not need to enter ‘0’ first for a
single digit number.)
3. Press the appropriate button for the function you require (see below).
X-10 Functions:
On:
CHANNEL +
Off:
CHANNEL –
Bright:
VOLUME +
Dim:
VOLUME –
All Lights On: POWER
All Modules Off: MUTE
Note: You cannot dim or brighten an Appliance Module. If the module was off and you press its number followed by
Bright or Dim (VOLUME+ or VOLUME-) this will simply turn the module on. All Lights On only works with Lamp
Modules. (Appliance Modules do not respond to this command).
Changing the X-10 House Code:
The UR28A Remote defaults to Housecode A, and in most cases you will not need to change this unless you are
experiencing interference from a neighboring X-10 system.
1. Press and release the X-10 button.
2. Press and hold SETUP until the LED indicator lights steadily. Release the Setup button.
3. Use the number buttons to enter the number equivalent to the chosen Housecode (1=A, 2=B ..16=P).
4. Press the ENTER button to confirm the Housecode. The LED turns off.
Note: The Housecode you choose must match the Housecode on the Transceiver and X-10 Modules you are using it
with.
F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
This equipment generates and uses radio frequency energy, and if not installed and used properly, that is, in strict accordance
with the manufacturers instructions, may cause interference to radio and television reception. It has been type tested and
found to comply with the limits for remote control security devices in accordance with the specifications in Sub-Part B of
Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential
installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause interference to radio or television reception, which can be determined by unplugging the equipment, try to
correct the interference by one or more of the following measures.
o Reorient the antenna of the radio/TV experiencing the interference.
o Relocate the product with respect to the radio/TV.
o Move the product away from the radio/TV.
o Plug the product into an outlet on a different electrical circuit from the radio/TV experiencing the interference.
If necessary, consult your local dealer for additional suggestions.
NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADE TO THE UNITS. ANY CHANGES MADE TO THE
UNITS WILL VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
X-10 (USA) Inc., 91 Ruckman Rd., Closter, NJ 07624. ww.x10.com
UR28A-2/26/99

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 1
Create Date                     : 1999:02:26 13:30:22
Producer                        : Acrobat Distiller 3.01 for Windows
Author                          : daverye
Creator                         : PageMaker 6.0
Title                           : UR28Ainst.pm6
EXIF Metadata provided by EXIF.tools
FCC ID Filing: B4SUR28A

Navigation menu