Authinx UR86A Remote Control User Manual UR86A IS pm6

Authinx Inc. Remote Control UR86A IS pm6

Exhibit D Users Manual per 2 1033 b3

Set Up and Operating Instructions forRemote Control Model UR86AInstall batteries:Open the battery compartment on the back of the remote and insert 4 AAA alkaline batteries(not supplied). Observe polarity.Setup1. Turn on the device you want to control (TV, VCR, cable box, etc.).2. Press and hold SETUP until the LED indicator lights steadily. Release the SETUP button.3. Press and release mode button for the device you want to control. The LED blinks once.4. Enter the 3 digit Code from the Library Code Table (separate sheet). The LED turns off afterthe last digit entered.5. Point the remote at the device and press the POWER button. Your device should turn off.6. Turn your device on and press CHANNEL+. If the device responds, setup is complete.PC OperationDownload and install the software from www.x10.com/software. Run the program and pressthe PC button to access Mouse Remote features. Follow the on screen prompts in the softwareand select help from the on-screen menu for more information.X10 (USA) Inc.400 Forge Way, Suite 412Rockaway, NJ 07866973-625-9355 UR86A-10/01TVVCR AUXPOWERCBLPLAYSTOPPAUSERECREW F.F.2134567890MENU E XITX1OABCDPCMLLRF.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TOTHE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAYCAUSE UNDESIRED OPERATION.This equipment generates and uses radio frequency energy, and if not installed and used properly, that is, in strict accordancewith the manufacturers instructions, may cause interference to radio and television reception. It has been type tested andfound to comply with the limits for remote control security devices in accordance with the specifications in Sub-Part B ofPart 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residentialinstallation. However, there is no guarantee that interference will not occur in a particular installation. If this equipmentdoes cause interference to radio or television reception, which can be determined by unplugging the equipment, try tocorrect the interference by one or more of the following measures.o Reorient the antenna of the radio/TV experiencing the interference.o Relocate the product with respect to the radio/TV.o Move the product away from the radio/TV.o Plug the product into an outlet on a different electrical circuit from the radio/TV experiencing the interference. Ifnecessary, consult your local dealer for additional suggestions.NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADE TO THE UNITS. ANY CHANGES MADE TOTHE UNITS WILL VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

Navigation menu