Authinx XC14A XCam III Motion Controlled Camera User Manual Exhibit D users manual per 2 1033 b 3

Authinx Inc. XCam III Motion Controlled Camera Exhibit D users manual per 2 1033 b 3

Contents

Exhibit D users manual per 2 1033 b 3

1. Refer to the setup and operating instructions that camewith the 2.4 GHz Video Receiver, Model VR31A (soldseparately) to set up the Receiver.2. Mount the camera in a suitable location with the antennaon top so the camera is the right way up. If you installit outdoors, run the small cable adapter through a holein the wall so you can plug the power supply into anAC outlet indoors.3. Plug the camera’s power jack into the adapter cableon the power supply.4. Set the Housecode and Unit Code. (See instructionsincluded with X10 remote controls).5. Plug power supply into any 120V AC outlet.6. Set the channel switch on the camera to the same settingas the one on the VR31A Video Receiver.7. Adjust the antenna on the camera if necessary to aimit in the direction of the VR31A Receiver that you haveconnected to your TV or monitor.8. Adjust angle of motion detector for best coverage.X10 Wireless Technology, Inc., Limited One Year WarrantyX10 Wireless Technology, Inc. (X10) warrants X10 products to befree from defective material and workmanship for a period of one (1)year from the original date of purchase at retail. X10 agrees to repairor replace, at it’s sole discretion, a defective X10 product if returnedto X10 within the warranty period and with proof of purchase. Ifservice is required under this warranty:1. Call 1-800-675-3044 or e-mail sales@x10.com for details onhow to return your unit(s).2. Enclose a check for $4.00 to cover postage and handling.3. Enclose a dated proof of purchase.4. X10 is not responsible for shipping damage.Units to be returned should be packed carefully.Please visit www.x10.com/warrantyto complete your on-line warranty registration.1-800-675-3044 sales@x10.com●Built-in motion detector.●Built-in 2.4 GHz Video Sender.●Powered from a plug-in power supply (included).●Use it outdoors to monitor your front door, back yard, etc.●Use it indoors to monitor a child’s bedroom, etc.Model XX14AXC14A-02/01The XX14A includes the XC14A camera and XM13A power supply. The XC14A is a very small and compact colorvideo camera with built-in 2.4 GHz Video Sender. You can attach it to a wall anywhere you want to monitor. TheXC14A transmits video and sound to the VR31A 2.4 GHz receiver (sold separately) which is connected to your TVlocated anywhere in your home (up to 100 ft. away). The built-in motion detector turns the camera on only whenthere is motion, to conserve power. The motion detector also sends a wireless signal to an X10 transceiver which canthen turn on an X10 remote chime, etc.XCam III Motion Controlled Indoor/Outdoor Color CameraAdjust antenna.XC14A™(with built-in 2.4 GHz transmitter)25Plug intoany ACoutletAttach theto a wall.637Set channel switch tomatch setting on theVR31A Receiver.F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWINGTWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPTANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: NOCHANGES OR MODIFICATIONS MAY BE MADE TO THE UNITS. ANY CHANGES MADE TO THE UNITS WILL VOID THEUSER'S AUTHORITY TO OPERATE THE EQUIPMENT.OutdoorsIndoors8Set the code used toturn on an off fromX10 remote controls.4XM13A

Navigation menu