Authinx XC18A Video Camera with Built-In 2.4GHz Transmitter User Manual Exhibit D Users Manual per 2 1033 b3

Authinx Inc. Video Camera with Built-In 2.4GHz Transmitter Exhibit D Users Manual per 2 1033 b3

Contents

Exhibit D Users Manual per 2 1033 b3

Download: Authinx XC18A Video Camera with Built-In 2.4GHz Transmitter User Manual Exhibit D Users Manual per 2 1033 b3
Mirror Download [FCC.gov]Authinx XC18A Video Camera with Built-In 2.4GHz Transmitter User Manual Exhibit D Users Manual per 2 1033 b3
Document ID163823
Application IDhkXIK/meB8cTx5lT8NBkoA==
Document DescriptionExhibit D Users Manual per 2 1033 b3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1.84kB (23024 bits)
Date Submitted2001-08-09 00:00:00
Date Available2001-08-09 00:00:00
Creation Date2001-07-24 21:08:04
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2001-07-24 21:08:07
Document TitleExhibit D Users Manual per 2 1033 b3

XCam2 ™ InstantON Video Camera
● Extremely small size.
● Built-in 2.4 GHz Video Sender.
● Can be turned on and off remotely (remote controlled power supply included).
● Use it outdoors to monitor your front door, back yard, etc.
Model XX16A
● Use it indoors to monitor a child’s bedroom, etc.
The XX16A includes the XC18A camera and XM13A remote controlled power supply. The XC18A is a very small
and compact color video camera with built-in 2.4 GHz transmitter. You can attach it to a wall anywhere you want to
monitor. The XC18A transmits video and sound to the VR31A, or video only to the VR36A receiver which is
connected to your TV located anywhere in your home (up to 100 ft. away). The XM13A power supply lets you turn
the camera on and off remotely, from X10 remote controls (sold separately).
1. Refer to the setup and operating instructions that came
with the 2.4 GHz Video Receiver, Model VR31A or
VR36A (sold separately) to set up the Receiver.
2. Mount the camera in a suitable location with the antenna
on top so the camera is the right way up. If you install
it outdoors, run the small cable adapter through a hole
in the wall so you can plug the power supply into an
AC outlet indoors.
3. Plug the power supply’s jack into the adapter cable on
the camera.
4. Set the Housecode and Unit Code. (See instructions
included with X10 remote controls).
5. Plug the power supply into any 120V AC outlet.
6. Set the channel switch on the camera to the same setting
as the one on the VR31A or VR36A Video Receiver.
7. Adjust the antenna on the camera if necessary to aim
it in the direction of the VR31A/VR36A Receiver that
you have connected to your TV or monitor.
7 Adjust antenna.
Remove clear cap
and turn lens to
focus (replace cap
for outdoor use).
the
2 Attach
to a wall.
XC18A
LIMITED 1-YEAR WARRANTY
Outdoors
X10 Wireless Technology, Inc. (X10WTI) warrants X10
products to be free from defective material and workmanship
Indoors
for a period of one (1) year from the original date of purchase
at retail. X10WTI agrees to repair or replace, at it’s sole
Plug power
discretion, a defective X10 product if returned to X10WTI
within the warranty period and with proof of purchase.
supply in
If service is required under this warranty:
here.
1. Call 1-800-675-3044 or e-mail sales@x10.com for
details on how to return your unit(s).
2. Enclose a check for $4.00 for postage and handling.
3. Enclose a dated proof of purchase.
Set the code used to turn
4. X10 is not responsible for shipping damage.
on an off from X10
Units to be returned should be packed carefully.
remote controls.
5. For additional warranty information, contact X10.
Set channel
switch to
match setting
on VR31A or
VR36A
Receiver. (A is
at bottom, D is
at top).
Cable adapter.
Plug into
any AC
outlet
XM13A
F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: NO
CHANGES OR MODIFICATIONS MAY BE MADE TO THE UNITS. ANY CHANGES MADE TO THE UNITS WILL VOID THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
X10.com, a Div. of X10 Wireless Technology, Inc.
For additional help, visit www.x10.com/support
XX16A-07/01

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2001:07:24 21:08:04
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:07:24 21:08:07-04:00
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: B4SXC18A

Navigation menu