Authinx XC21A Pan Tilt Zoom camera User Manual Exhibit D Users Manual per 2 1033 b3

Authinx Inc. Pan Tilt Zoom camera Exhibit D Users Manual per 2 1033 b3

Exhibit D Users Manual per 2 1033 b3

HOUSEACEGIKMO........UNIT13579111315 ........1. Refer to the setup and operating instructions that camewith the Video Receiver, (VR31A or VR36A) and CR15Aremote control (all sold separately)..2. Install the camera in a suitable location. If you install itoutdoors, run the jack through a hole in the wall, or througha window, so you can plug the power supply into an ACoutlet indoors.3. Plug the XM15A power supply’s jack into the cable on thePan/Tilt/Zoom camera.4. Set the Housecode dial to a letter between A and P thatmatches the Housecode dial on the X10 remote controlsyou want to use it with. Set the Unit Code dial to a numberbetween 1 and 4. This lets you turn the camera connectedto the XM15A on and off by remote control, using theCR15A remote.5. Plug the power supply into any 120V AC outlet.6. Set the channel switch on the camera to the same setting asthe one on the VR31A or VR36A Video Receiver (A, B, C, orD).7. Adjust the antenna if necessary to aim it in the direction ofthe TV that you will view the camera on.See CR15A remote control’s instructions for Pan ‘n Tilt, andzoom operation.F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15OF THE FCC RULES. OPERATION IS SUBJECT TO THEFOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAYNOT CAUSE HARMFUL INTERFERENCE, AND (2) THISDEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,INCLUDING INTERFERENCE THAT MAY CAUSEUNDESIRED OPERATION.NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADETO THE UNITS.  ANY CHANGES MADE TO THE UNITSWILL VOID THE USER'S AUTHORITY TO OPERATE THEEQUIPMENT.●Built-in 310 MHz Receiver to work with CR15A Remote (sold separately).●CR15A Remote lets you Pan the camera from side to side, Tilt it up and down, and Zoom in remotely.●Can be turned on and off remotely (remote controlled power supply included).●Use it outdoors to monitor your front door, back yard, or indoors to monitor a child’s bedroom, etc.ModelXX21AXX21A-03/02The XX21A includes the XC21A Pan/Tilt/Zoom Camera and XM15A remote controlled power supply. You can remotelycontrol the camera’s position, etc.,  using a CR15A remote control (sold separately). The camera sends the picture and soundto a receiver that you connect to your TV, up to 100 ft. away. (Receivers and Remote Controls sold separately).Pan/Tilt/Zoom CameraX10.com, a Div. of X10 Wireless Technology, Inc.For additional help, visit www.x10.com/supportXC21APlug power supplyin here.3Cableadapter.Indoors orOutdoorsIndoors5Plug into any AC outletSet the code used toturn on and off fromX10 remote controls.4XM15ALIMITED 1-YEAR WARRANTYPlease visit www.x10.com/warrantyto complete your on-line warranty registration. Thank you.For help or more information on setup, please visit:Point the raised dimpleon the antenna towardsthe Receiver’s location.76Set ABCD channelswitch (underneath)to match setting onVR31A or VR36AReceiver.

Navigation menu