Autonet Mobile ANMHLORTR-01 Mobile Router User Manual Users Guide

Download:
Mirror Download [FCC.gov]
Document ID	1682746
Application ID	ALBwcmvzW9WrDJrMIPWicA==
Document Description	Users Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	45.51kB (568921 bits)
Date Submitted	2012-04-24 00:00:00
Date Available	2012-04-24 00:00:00
Creation Date	2009-05-06 11:00:51
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2009-05-06 14:14:47
Document Title	Users Guide
Document Creator	Adobe InDesign CS4 (6.0.1)

Autonet Mobile customer support line:
1-800-977-2107
© 2009 Autonet Mobile, Inc.
P/N: 186-1100-001 Rev. 01
Important Product Information Guide
Important Product Information Guide
Welcome
Quickstart Guide
Configuring the In-Car Router
Configuring Wireless Settings
Configuring Wireless Security Settings
Configuring Login Screen
10
Changing the Password on Your In-Car Router
11
Checking the Connection Status of the In-Car Router
12
Troubleshooting Guide
13
Safety Policy
14
Acceptable Use Policy
20
Autonet Mobile Software License
24
Autonet Mobile Limited Warranty and Liability
26
Legal Disclosure
27
Welcome to Autonet Mobile
To activate your account with Autonet Mobile, please
submit a completed service agreement online or by fax.
Online
Go to https://signup.autonetmobile.com
Fax
Download the service agreement from:
https://signup autonetmobile.com and fax the completed
agreement to 415-840-1725.
If you have any questions please call 1-800-977-2107.
For technical support call the Autonet Mobile customer
service center: 1-800-977-2107.
Autonet Mobile assumes no responsibility for the
configurations, security, or data files on your wireless
device resulting from connection to Autonet Mobile’s
network. Anti-virus, privacy and security protection is the
responsibility of the user.
Do not operate the In-Car Router while driving or
perform any function that takes your attention away from
safely driving your vehicle. Any function that requires
prolonged attention should be performed after coming to
a complete stop. Always stop the vehicle in a safe location
before performing these functions. Failure to do so may
result in an accident.
If the In-Car Router is found, please call: 1-800-977-2107.
The router is automatically disabled if lost.
Quickstart Guide
Step 1
Configuring the In-Car Router
It is highly recommended that the user enable WEP security and change the default
password on the Autonet Mobile In-Car Router.
Configuring the WiFi interface on your In-Car Router
Turn your car to power up Autonet Mobile. Shortly “autonet”
will appear in your wireless network list.
Step 2
In your wireless network list connect to the wireless network
that contains the name “autonet”.
Step 3
Open your web browser. Click on the login button.
The unit’s serial number is is a ten digit hexadecimal number located in 2 places. It is located:
1. On the back of the In-Car Router
2. On the front of the quickstart guide.
Step 4
If you have trouble locating the serial number of the router please call our customer support line at 1-800-977-2107 for assistance.
Happy surfing!
unit’s serial number as the password. (e.g. 0024C76258 ) and click on the “login” button.
or
Open a web browser and go to the URL: http://www. autonetrouter.com/admin login as username “autonet” and use the
Configuring Wireless Settings
Radio Mode
Click on “Wireless Settings”
This allows you to select whether the radio is in 802.11b, 802.11g and 802.11a mode. Not all routers support all modes, so
only the supported modes for your In-Car Router are shown.
ESSID
Channel
Extended Service Set ID. The ESSID is the identifying name of a wireless network - strictly it is the identifying name of a
wireless access point. It allows one wireless network to be clearly distinguishable from another. The default ESSID is autonetXXXX, where XXXX is the last 4 digits of the In-Car Router’s serial number. It is recommended that you keep this ESSID in
order to distinguish your router from other routers that may be in the area.
Direct communication between an 802.11 Radio card and an access point occurs over a common channel frequency. The
FCC allows channels 1 through 11 within the U.S. An important concept to note regarding channel assignments is that the
channel actually represents the center frequency that the transceiver within the radio and access point uses (e.g., 2.412 GHz
for channel 1 and 2.417 GHz for channel 2). There is only 5 MHz separation between the center frequencies, and an 802.11b
signal occupies approximately 30 MHz of the frequency spectrum. The signal falls within about 15 MHz of each side of the
center frequency. As a result, an 802.11b signal overlaps with several adjacent channel frequencies. This leaves you with only
three channels (channels 1, 6, and 11 for the U.S.) That you can use without causing interference between access points.
WEP key
The WEP key is not shown if it is set. You do not have to set it, if you want it to remain the same. To set the current encryption
key, just enter the key in hex digits as XXXXXXXXXX. The key must be 10 hex digits, (e.G. 1234567890 ) You can also enter
the key as an ASCII string by using the s: prefix. The ASCII string must be five characters, (e.g. s:smile ). To disable WEP, enter
“off” as the WEP key.
Configuring Wireless Security Settings
Bit rate
Click on “Wireless Security”
This allows you to set the bit rate in Mbs. The bit rate is the speed at which bits are transmitted over the medium. The user
speed of the link is lower due to medium sharing and various overhead. Select a value to lock the card to a particular bit
rate. If you specify auto, the driver will use all bit rates to find an optimum rate.
RTS threshold
RTS/CTS adds a handshake before each packet transmission to make sure that the channel is clear. This adds overhead, but
Increases performance in case of hidden nodes or a large number of active nodes. This parameter sets the size of the smallest
packet for which the node sends rts; a value equal to the maximum packet size disables the mechanism. You may also set this
parameter to off.
Fragmentation threshold
Fragmentation allows to split an IP packet in a burst of smaller fragments transmitted on the medium. In most cases this adds
overhead, but in a very noisy environment this reduces the error penalty and allow packets to get through interference bursts.
This parameter sets the maximum fragment size. You may also set this to off to disable the mechanism.
TxPower
This allows you to set the transmit power of the radio. Setting a lower value limits the range of the radio and reduces
Interference with other access points.
The Wireless Security Settings allow you to control which wireless-equipped devices may communicate with the router
depending on their MAC addresses. By default these MAC filters are disabled. If you turn MAC filters on, you should be
sure and include the MAC address of the device that you are using to communicate with. Otherwise, the machine that
you’re using will lose its connection to the In-Car Router.
This page will show you all of the wireless devices currently attached to the In-Car Router..
To enable MAC filters, change the MAC filters option to “on” and then check the “Allowed” box next to the MAC addresses
that you wish to allow to join the network.
If you would like to have devices connect that are not currently attached to the In-Car Router you may add them in the
box. You can add multiple devices by separating them with a space.
Select “commit changes” when you are finished.
Configuring Login Screen
Changing the password on your In-Car Router
Click on “login control”
Click on “Password”
Normally a device that connects to the Autonet Mobile network must first click through the login screen that comes up on
your web browser. However, there are some devices that do not have a web browser (cameras, music players, etc.) So
we’ve created a method for disabling the login page for those devices.
This page will show you all of the wireless devices currently attached to the In-Car Router.
To bypass the login screen for a device, check the box under “no login required” next to the MAC address of that device.
Click on the user name “autonet”
Enter a new password and click on “Save Changes”
If you would like to add devices that are not currently attached to the In-Car Router, then you may add them in the box.
You can add multiple devices by separating them with a space.
Select “Commit Changes” when you are finished.
If you ever forget your password, please contact the Autonet Mobile customer service center to have it reset.
10
11
Checking the Connection Status of the In-Car Router
Troubleshooting Guide
In your web browser open the URL http://www.autonetrouter.com to see the current connect status of your In-Car Router.
The solid blue light on top of the In-Car Router indicates the internet connection is currently connected. If there are no WiFi
users currently connected to the In-Car Router, the connection will be dropped and the blue light will start blinking to indicate
that it is in idle mode. When a WiFi user attempts to connect to the internet, the In-Car Router will automatically set up the
connection and the blue light will go solid when the internet connection is ready.
A flashing blue light on top of the In-Car Router indicates the unit is attempting to connect to the internet or is in idle mode. If
the light doesn’t stop flashing after three minutes, try the following steps:
1. Ensure the antennas on the In-Car Router are screwed on tightly.
2. Unplug/plug in the In-Car Router.
If the light continues to flash, it is likely that you are in an area that has no coverage.
Link Connected
W-Fi Connections:1
If you receive the “limited or no connectivity” status after connecting wirelessly to the In-Car Router:
Connection Type: EVDO-0
1. Click the disconnect button.
Ethernet: NoLink
2. Click the connect button to reconnect.
Signal Strength: 68%
Help
Copyright © 2009 www.autonetmobile.com All rights reserved.
If Autonet does not appear in the list of wireless networks window, try the following steps:
1. Refresh your available wireless networks window.
2. Disable and then Enable your wireless interface.
3. If autonet still does not appear in this list, consult the configuration instructions provided by your WiFi device manufacturer,
or call the Autonet Mobile customer service center. Please have your serial number available when you call.
12
13
Safety Policy
Warning
Pacemakers
Please read this Safety Policy concerning the use of a wireless router suitable for use in motorized vehicles (“Autonet Mobile”)
before operating the In-Car Router. Retain this Safety Policy for your future reference.
Accessories
Use only accessories manufactured by Autonet Mobile, Inc. with the In-Car Router. The use of any accessories not
manufactured by Autonet Mobile, Inc. for use with the In-Car Router may be dangerous.
If you have a pacemaker, you should consult a physician or the manufacturer of your pacemaker if you have questions
regarding the effect of RF signals on your pacemaker. If you have a pacemaker, ensure that you are using the In-Car Router
in accordance with the safety requirements for that particular pacemaker, which may Include the following:
1. Always keep the In-Car Router more than 20 cm (7 Inches) from the pacemaker when the In-Car Router is turned on;
2. Do not carry the In-Car Router in any breast pocket; and if you have any reason to believe that the In-Car Router is
Interfering with the proper functioning of your pacemaker, turn the In-Car Router off immediately.
Driving
Do not use the In-Car Router when driving a motor vehicle because driving safely is your first responsibility and
requires your full attention. If you find it necessary to use the In-Car Router while driving a motor vehicle, please pull
off the road and park in a safe place before using the In-Car Router.
Hearing Aids
Some digital wireless devices may interfere with the normal operations of some hearing aids. In case of such interference,
consult your service provider or contact the manufacturer of your hearing aid to determine alternatives.
For vehicles equipped with air bags
Other Medical Devices
An air bag inflates with great force. Do not place objects, including the In-Car Router, in the area adjacent to any air bag or
in any air bag deployment area. If the In-Car Router is improperly installed and an air bag inflates, serious injury could result.
If you use any other personal medical devices, consult the manufacturer of that device to determine if it is adequately
shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
Electronic Devices
Medical Facilities
Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may
not be shielded against the RF signals from the In-Car Router. It is your responsibility to determine any effects that your use
of the In-Car Router may have on other electronic equipment. In particular, consult the manufacturer of any motor vehicle in
which you intend to use the In-Car Router to determine if the electronic equipment in that vehicle is adequately shielded from
the RF energy emitted by your In-Car Router. You should also consult the manufacturer of any electronic equipment that you
have added to that vehicle to ensure that it is adequately shielded from the RF energy emitted by the In-Car Router. You are
responsible for any affects that your use of the In-Car Router may have on the electronic equipment in any vehicle in which it
is operated.
Turn the In-Car Router off in hospitals and other health care facilities when any regulations posted in these facilities tell you to
do so. Hospitals and other health care facilities may be using equipment that could be sensitive to external RF energy.
Posted Facilities
Turn the In-Car Router off in any facility where posted notices so require.
Blasting Areas
To avoid interfering with any blasting operations, turn the In-Car Router off when in any “blasting area” or in any area
posted: “turn off two-way radio.” Obey all signs and instructions.
14
15
Potentially Explosive Atmospheres
Foreign Objects and Liquids
Turn the In-Car Router off when in any area with a potentially explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire and result in bodily injury or death.
Never push objects of any kind into the In-Car Router or any accessories because such insertion may cause parts to short
out and result in a fire or electric shock. Do not use the In-Car Router or any accessories near or in water or if wet. Never
spill liquid of any kind on the In-Car Router or any accessories. Disconnect the In-Car Router and any accessories before
cleaning them.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They Include fueling areas, like a
gasoline/petrol station, fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane
and butane); areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other area
where you would normally be advised to turn off your vehicle engine.
Power Cord
Protect any power cord from being walked on or pInched, and such protection especially should be afforded at any plugs,
receptacles, and the point where they exit from the In-Car Router;
1. Unplug the power cord during lightning storms to avoid electrical shock or fire;
2. Unplug the power cord prior to cleaning the In-Car Router;
3. Keep the minimum required amount of space between the power cord and any heat sources;
Stability
Do not place the In-Car Router or any accessories on any unstable suRFaces. They may fall, thereby potentially causing
serious injury to a person or animal, and/or serious damage to the In-Car Router or any accessories.
Care
Do not use liquid or aerosol cleaners or solvents on or near your In-Car Router, or any accessories. Clean your In-Car Router,
or any accessories only with a dry cloth. If you use harsh chemicals, like alcohol, benzene, or thinners, to clean the In-Car
Router, there is a risk of causing a fire.
Magnetic Items
4. Clean the power plug when it is dirty;
Do not place items with magnetic components, like credit cards, phone cards, bank books, or subway tickets, near your
In-Car Router.
5. Do not bend, twist, pull, or heat the power cord because such actions may damage the power cord;
Extreme Temperatures
6. Do not use the power plug if it is loose as it may cause a fire or electric shock;
Never expose your In-Car Router to excessively hot or cold temperatures because the In-Car Router may malfunction or be
damaged. The In-Car Router and any accessories should be located away from any heat sources.
7. Wash hands after handling the power cord;
8. To reduce the risk of damage to the cord or the plug, pull the plug instead of the cord when disconnecting
from a receptacle.
16
Storage
Store your In-Car Router in a clean, dust-free environment when not in use. Store your In-Car Router out of reach of small
children and animals.
17
Service
Antenna Care
Disconnect your In-Car Router, any charging unit, or any accessory and, if necessary, refer them to qualified service personnel if:
Only use any supplied integral antenna with the In-Car Router. Unauthorized antenna modifications, or attachments could
damage the In-Car Router and may violate U.S. Federal communications commission (FCC) regulations. No one should hold
the antenna or let it come into contact with his or her body when the In-Car Router is in use. Do not use the In-Car Router if
the antenna is damaged. If a damaged antenna touches skin, it may cause a slight burn.
1. The power supply, plug, or connector to your In-Car Router is damaged;
2. Liquid has been spilled or objects have fallen into your In-Car Router, any charging unit, or any accessory;
Local Laws
3. Your In-Car Router, any charging unit, or any accessory has been exposed to rain or water;
4. Your In-Car Router or any accessory becomes very hot to the touch;
5. Your In-Car Router, any charging unit, or any accessory has been dropped or damaged in any way;
Drivers and their passengers are responsible for determining and complying with any local laws affecting the use of the
In-Car Router. Accordingly, you should familiarize yourself with any applicable laws in jurisdictions where you use the In-Car
Router. Always obey those laws.
Exposure to Radio Frequency Signals
6. Your In-Car Router or any accessory does not operate normally in accordance with the instructions contained in any guide
Provided by Autonet Mobile, Inc.;
7. Your In-Car Router or any accessory exhibits a distInct change in performance.
The In-Car Router is a low power radio transmitter and receiver. When it is turned on, it sends out and receives RF signals.
The In-Car Router complies with FCC guidelines respecting safe levels of RF exposure for handled wireless devices, which in
turn are consistent with the following safety standards previously set by certain standards bodies:
All servicing of the In-Car Router or any accessory should be undertaken only by qualified service personnel. Do not attempt
to disassemble, modify, or repair the In-Car Router or any accessory yourself.
1. ANSI/IEEE C95.1-1999, IEEE standard for safety levels with respect to Human Exposure To Radio Frequency
Adjustments
2. National Counsel On Radiation Protection And Measurements (NCRP) report 86, - 1986, Biological Effects and Exposure
Electromagnetic Fields, 3 Khz to 300 GHz;
Criterion for Radio Frequency Electromagnetic Fields; and
Adjust only those controls for the In-Car Router that are discussed in the instructions contained in any guide provided by
Autonet Mobile, Inc. An improper adjustment of other controls for the In-Car Router may result in damages and may require
extensive work by a qualified technician to restore the In-Car Router or any accessory, as the case may be.
3. International Commission on Non-Ionising Radiation Protection (ICNIRP) 1988, guidelines for limiting exposure to
time-varying Electric, magnetic, and electromagnetic fields (up to 300 GHz).
Rough Treatment
Do not drop, strike, or shake severely the In-Car Router. Such actions may damage its internal circuit boards.
18
To maintain compliance with FCC exposure guidelines, use only accessories supplied or approved by Autonet Mobile, Inc.
19
Specific Absorption Rate Data
The In-Car Router meets U.S. Government requirements for exposure to radio waves. The In-Car Router is a radio transmitter
and receiver. It is designed and manufactured not to exceed the emission limits for exposure to RF energy set by the FCC.
These limits are part of comprehensive guidelines and establish permitted levels of exposure to RF energy for the general
population. These guidelines are based on standards that were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The standards Include a substantial safety margin designed to assure
the safety of all persons, regardless of age and health.
certain proprietary websites. However, in accordance with our internet Service Agreement, we may remove any materials
that, in our sole discretion, may be illegal, may subject us to liability, or which may violate this AUP. Autonet Mobile, Inc may
cooperate with legal authorities and/or third parties in the investigation of any suspected or alleged crime or civil wrong.
Your violation of this AUP may result in the suspension or termination of either your access to the services and/or your Autonet
Mobile, Inc account or other actions as detailed in section 3. This AUP should be read in conjunction with our internet Service
Agreement and other policies.
2. Violations of Autonet Mobile’s Acceptable Use Policy
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense. Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
A. Illegal use. Using the services to transmit any material (by e-mail, uploading, posting, or otherwise) that, intentionally or
unintentionally, violates any applicable local, state, national or international law, or any rules or regulations promulgated
there under.
B. Harm to minors. Using the services to harm, or attempt to harm, minors in any way.
C. Threats. Using the services to transmit any material (by e-mail, uploading, posting, or otherwise) that threatens or encourages
bodily harm or destruction of property.
D. Harassment. Using the services to transmit any material (by e-mail, uploading, posting, or otherwise) that harasses another.
Acceptable Use Policy
1. Introduction
Autonet Mobile, Inc’s Acceptable Use Policy (“AUP”) is intended to help enhance the use of the internet by preventing
unacceptable use. All users of Autonet Mobile, Inc’s internet services (the “services”) those who access some of our services
but do not have accounts (“visitors”), as well as those who pay a monthly service fee to subscribe to the services (“members”)
must comply with this AUP. We support the free flow of information and ideas over the internet and do not actively monitor
use of the services under normal circumstances. Similarly, we do not exercise editorial control over the content of any web
site, electronic mail transmission, newsgroup, or other material created or accessible over or through the services, except for
20
E. Fraudulent activity. Using the services to make fraudulent offers to sell or buy products, items, or services or to advance any
type of financial scam such as “pyramid schemes,” “ponzi schemes,” and “chain letters.”
F. Forgery or impersonation. Adding, removing, or modifying identifying network header information in an effort to deceive
or mislead is prohibited. Attempting to impersonate any person by using forged headers or other identifying information
is prohibited. The use of anonymous remailers or nicknames does not constitute impersonation. Using deliberately misleading
headers (“munging” headers) in news postings in order to avoid spam e-mail address collectors is allowed.
G. Unsolicited commercial e-mail/unsolicited bulk e-mail. Using the services to transmit any unsolicited commercial e-mail or
unsolicited bulk e-mail. Activities that have the effect of facilitating unsolicited commercial e-mail or unsolicited bulk e-mail
whether or not that email is commercial in nature, are prohibited.
21
H. Unauthorized access. Using the services to access, or to attempt to access, the accounts of others, or to penetrate, or attempt to
N. Long connections and multiple logins. Using a personal account for high volume or commercial use is prohibited. The
penetrate, security measures of Autonet Mobile, Inc’s or another entity’s computer software or hardware, electronic
services are intended for periodic, active use of e-mail, newsgroups, file transfers, internet chat, games, and browsing the
communications system, or telecommunications system, whether or not the intrusion results in the corruption or loss of data.
world wide web. Users may stay connected so long as they are actively using that connection for the above purposes.
Users may not use the services on a standby or inactive basis in order to maintain a connection. Pinging is expressly
I. Copyright or trademark infringement. Using the services to transmit any material (by e-mail, uploading, posting, or otherwise) that
Infringes any copyright, trademark, patent, trade secret, or other proprietary rights of any third party, Including, but not limited
to, the unauthorized copying of copyrighted material, the digitization and distribution of photographs from magazines, books,
or other copyrighted sources, and the unauthorized transmittal of copyrighted software. Autonet Mobile, Inc. is registered under
prohibited. Accordingly, Autonet Mobile, Inc maintains the right to terminate any member’s connection following any
extended period of inactivity as determined by Autonet Mobile, Inc.
3. Reporting Violations of Autonet’s AUP
the digital millennium copyright act of 1998.
J. Collection of personal data. Using the services to collect, or attempt to collect, personal information about third parties without
their knowledge or consent.
Autonet Mobile, Inc requests that anyone who believes that there is a violation of this AUP direct the information to director
abuse department, at: abuse@ autonetmobile.com. If available, please provide the following information:
1. The IP address used to commit the alleged violation
K. Reselling the services. Reselling the services without Autonet Mobile’s authorization.
L. Network disruptions and unfriendly activity. Using the services for any activity which adversely affects the ability of other people
or systems to use Autonet Mobile, Inc services or the internet. This Includes “denial of service” (dos) attacks against another network
host or individual user. Interference with or disruption of other network users, network services or network equipment is prohibited.
It is the user’s responsibility to ensure that their network is configured in a secure manner. A user may not, through action or inaction,
allow others to use their network for illegal or inappropriate actions. A user may not permit their network, through action or inaction,
to be configured in such a way that gives a third party the capability to use their network in an illegal or inappropriate manner.
M. News. Autonet Mobile users should use their best judgment when posting to any newsgroup. Many groups have charters,
published guidelines, faqs, or “community standards” describing what is and is not considered appropriate. Usenet can be a
valuable resource if used properly. The continued posting of off-topic articles is prohibited. Commercial advertisements are off- topic
in most newsgroups, especially regional groups not specifically named for such. The presence of such articles in a group is not
indicative of the group’s “intended” use. Please familiarize yourself with basic usenet netiquette before posting to a newsgroup.
Autonet Mobile considers “multiposting” to 10 or more groups within a two week sliding window to be excessive. Autonet
Mobile servers currently limit the number of allowable “cross-posts” to 9.
Autonet Mobile users may not cancel messages other than their own messages. A user may cancel posts forged in that user’s
name. We may cancel any postings which violate this AUP.
22
2. The date and time of the alleged violation, Including the time zone or offset from GMT
3. Evidence of the alleged violation
E-mail with full header information provides all of the above, as do syslog files. Other situations will require different
methods of providing the above information.
Autonet Mobile, Inc may take any one or more of the following actions in response to complaints:
1. Issue warnings: written or verbal
2. Suspend the member’s newsgroup posting privileges
3. Suspend the member’s account
4. Terminate the member’s account
5. Bill the member for administrative costs and/or reactivation charges
6. Bring legal action to enjoin violations and/or to collect damages, if any, caused by violations.
23
Autonet Mobile Software License
Important – read carefully. By removing the tamper label or otherwise using the software in your Autonet Mobile In-Car Router,
you agree to be bound by the license terms and conditions below. If you do not agree to these terms and conditions you must immediately return your Autonet Mobile In-Car Router in its original condition and packaging to the point of purchase for a refund of
your purchase price (after inspection).
Subject to these terms and conditions, Autonet Mobile, Inc. grants you a non-exclusive license, with no right to sublicense, to execute
the software included with the Autonet Mobile In-Car Router or subsequently provided to you by Autonet Mobile (together, the
“software”) on your Autonet Mobile In-Car Router solely for your personal use on the intended features and functions of the Autonet
Mobile In-Car Router. The license may be transferred only with the transfer of the Autonet Mobile In-Car Router on which Autonet
Mobile, Inc. has installed the software; any transferee will be subject to the terms and conditions of this license.
This license will terminate automatically, without notice, if you fail to comply with the terms and conditions, including the restrictions,
of this license.
Autonet Mobile, Inc. and its licensors own and retain all proprietary rights, including all patents, copyright, trade secret, trademark, and other intellectual property rights in and to the Autonet Mobile In-Car Router software. You acknowledge that the
license granted above does not provide you with title to or ownership of the software, but only a right of limited use under these
terms and conditions. The software embodies Autonet Mobile, Inc.’s trade secrets and other proprietary information and materials.
Any attempt to modify, enhance, disassemble, decompile, reverse engineer or otherwise gain access to the source code of the
software, to remove or unbundle the software from the Autonet Mobile In-Car Router, or to sublicense or distribute the software
is strictly prohibited, except as expressly set for in the paragraph titled “GPLand lGPL software” and “other open source software”
below or except as may be otherwise agreed by Autonet Mobile, Inc. in writing. Certain components of the software included
with the Autonet Mobile In-Car Router are subject to the GNU general public license (“GPL”), the lesser GNU general public
license (“lGPL”), or other “open source” or “free software” licenses (“open source software”). Some of the open source software
is owned by third parties. The open source software is not subject to the terms and conditions of the section titled “Autonet
Mobile, Inc. software license” above. Instead,each item of open source software is licensed under the terms of the end-user
license that accompanies such open source software. Nothing in this document limits your rights under, or grants you rights that
supersede, the terms and conditions of any applicable end user license for the open source software. In particular, nothing in
this document restricts your right to copy, modify, and distribute that open source software subject to the terms of the GPL and
lGPL. As required by the terms of the GPL and lGPL, Autonet Mobile, Inc. makes the open source software provided under the
GPL and lGPL available to the public in source code form on a CD. To receive a CD, please send $9.00 To Autonet Mobile, Inc.
24
for the cost of preparing and mailing the CD to you. Requests can be mailed to Source Code CD Request, Autonet Mobile Inc..,
1700 Montgomery Ste. 111, San francisco, CA 94111.
The following open source software is included with the Autonet Mobile In-Car Router. GPL and lGPL software. The Autonet Mobile
In-Car Router is provided with the following software licensed under the GPL and lGPL. A copy of the GNU GPL license is available
from the free software foundation (http://www.GNU.Org).
1. BusyBox from http://www.busybox.net
2. Card Services for Linux from http://pcmcia-cs.sourceforge.net
3. Host AP driver from http://hostap.epitest.
4. fiiptables from http://www.netfilter.org
5. Linux operating system version 2.4.29
6. Openswan (http://www.openswan.org
7. PPP from http://www.samba.org/ftp/unpacked/ppp/
8. dnsmasq from http://www.thekelleys.org.uk/dnsmasq/
9. nocat from http://nocat.net
10. wifiadmin from http://wifiadmin.sourceforge.net/
11. gpsd from http://gpsd.berlios.de/
12. squid from http://www.squid-cache.org/
13. radius from http://www.freeradius.org/
4. Revisions to this Acceptable Use Policy
Autonet Mobile, Inc. reserves the right to revise, amend, or modify this AUP, our internet Service Agreement and our other
policies and agreements at any time and in any manner. Notice of any revision, amendment, or modification will be posted
in accordance with the Internet Service.
25
Other Open Source Software.
(ii) defects, errors or non conformities in the product due to modifications, alterations, additions, or changes to the product not authorized by Autonet Mobile, Inc., In writing in advance; (iii) normal wear and tear; (iv) damage caused by force of nature or act of any third
Autonet Mobile In-Car Router is provided with the following software licensed under bsd licenses or other open source
software licenses. The software and license details are available from the referenced web-sites.
1. net-snmp from the net-snmp project (http://www.net-snmp.org)
2. openssh from the openbsd project (http://www.openssh.com)
3. thttpd from jef poskanzer (http://www.acme.com)
person, including shipping damage; (v) service or repair of product by the purchaser without prior written consent from Autonet Mobile,
Inc.; (Viii) products designated by Autonet Mobile, Inc. As beta site test samples, experimental, developmental, reproduction, sample,
incomplete or out-of-specification products; (viii) returned products if the original identification marks or tamper seals have been
removed from the product or altered; (ix) condensation, water, or liquid damage; (x) damage caused to the user’s computer; (xi) loss of
data; or (xii) damage caused by viruses. The foregoing limitations will apply even if any warranty or remedy provided hereunder fails
of its essential purpose. This warranty gives you specific legal rights, and you may also have other rights that vary by jurisdiction. Some
jurisdictions do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential
damages, so the above warranty limitations may not apply to you.
Autonet Mobile Limited Warranty and Liability
No warranties of any kind are provided by Autonet Mobile, Inc. With respect to this product, except as stated in Autonet Mobile Limited
Warranty below.
Autonet Mobile, Inc. warrants to the original end user purchaser (“you”) that the product shall be free of defects in materials and workmanship
under normal use for one (1) year from the original date of purchase (the “warranty period”). These warranties are expressly in lieu of all
other warranties, express or implied, including, without limitation, all implied warranties of merchantability and fitness for a particular
purpose and any warranties arising from course of performance, course of dealing or trade usage.
Autonet Mobile, Inc.’s exclusive liability and your exclusive remedy hereunder is expressly limited to, at Autonet Mobile Inc.’s sole option
and discretion, (a) exchange, repair or replacement of defective or nonconforming materials, parts or components; or (b) refund of all
amounts paid directly to Autonet Mobile, Inc. For any defective product. Replacement products may be new or remanufactured.
Legal Disclosure
Copyright © 2009 by Autonet Mobile, Inc.
All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work
(such as translation, transformation, or adaptation) without written permission from Autonet Mobile, Inc.
Autonet Mobile, Inc. Reserves the right to revise this publication and to make changes in content from time to time without obligation to
provide notification of such revision or change. Autonet Mobile, Inc. Provides this guide without warranty of any kind, either implied or
expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Autonet Mobile,
Inc. may make improvements or changes in the product(s) and product specifications described in this user guide at any time.
The above shall apply whether Autonet Mobile, Inc.’s liability arises from any breach of its express warranty, breach of any obligation or
otherwise with respect to the manufacture and sale of any units of the product, whether liability is asserted in contract or tort, including
negligence and strict product liability. In no event shall Autonet Mobile, Inc. Be liable for special, indirect, incidental or consequential
damages of any kind or nature due to any cause, regardless of whether Autonet Mobile, Inc. Has been advised of the potential for such
damages or if such damages are foreseeable, or for claims by any third party. Autonet Mobile Inc.’s maximum aggregate liability to
purchaser shall not exceed the amount paid by purchaser for the product.
Product may contain repackaged and/or reconditioned parts. By using this product, you agree to the terms and conditions of the
Autonet Mobile, Inc. Service Agreement.
All trademarks, trade names, product names, service names, and service marks listed in this user guide or with the software are the
exclusive property of their respective owners. Neither Autonet Mobile, Inc. Nor the Autonet Mobile In-Car Router are endorsed by or
affiliated with the respective companies listed above and no such endorsement is implied.
The foregoing warranties do not extend to: (i) nonconformities, defects, or errors in the product due to accident, abuse, misuse, or
negligent use of the product or use in other than a normal and customary manner, environmental conditions not conforming to Autonet
Autonet Mobile, Inc. Autonet mobile In-Car Router, the Autonet Mobile logo, and TRU technology are all trademarks of Autonet Mobile,
Mobile, Inc.’s specification, improper installation, or failure to follow prescribed operating and maintenance procedures;
Inc. All other trademarks, product names or service names, are the property of their respective owners.
26
27
If you have any questions or problems, please call the
Autonet Mobile customer service center at 1-800-977-2107

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2009:05:06 11:00:51-07:00
Creator                         : Adobe InDesign CS4 (6.0.1)
Modify Date                     : 2009:05:06 14:14:47-07:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2009:05:06 14:14:47-07:00
Creator Tool                    : Adobe InDesign CS4 (6.0.1)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 4283 bytes, use -b option to extract)
Instance ID                     : uuid:806d3631-b8ce-4414-b6b1-f2f01b9ee7a9
Document ID                     : xmp.did:F82AF640122068118DBBA8F871F22EFF
Original Document ID            : xmp.did:D871E97722206811871FF83A40DAF6B9
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:D871E97722206811871FF83A40DAF6B9, xmp.iid:D971E97722206811871FF83A40DAF6B9, xmp.iid:DA71E97722206811871FF83A40DAF6B9, xmp.iid:DB71E97722206811871FF83A40DAF6B9, xmp.iid:68F1ED676420681188C68C261CF7E12C, xmp.iid:1298A8B01E20681192B0B4C9A452FB8F, xmp.iid:1398A8B01E20681192B0B4C9A452FB8F, xmp.iid:469A579D3820681192B0B4C9A452FB8F, xmp.iid:479A579D3820681192B0B4C9A452FB8F, xmp.iid:FE7F1174072068118DBBA8F871F22EFF, xmp.iid:FF7F1174072068118DBBA8F871F22EFF, xmp.iid:00801174072068118DBBA8F871F22EFF, xmp.iid:F82AF640122068118DBBA8F871F22EFF, xmp.iid:0A80117407206811847FBD4393B85B45, xmp.iid:01801174072068118F62A0EAF9048269
History When                    : 2009:02:25 19:24:09-08:00, 2009:02:25 19:45:05-08:00, 2009:02:25 19:45:05-08:00, 2009:02:25 19:54:01-08:00, 2009:02:28 17:04:07-08:00, 2009:03:04 19:21:03-08:00, 2009:03:04 19:26:21-08:00, 2009:03:04 21:25:46-08:00, 2009:03:04 21:25:46-08:00, 2009:04:06 15:06:06-07:00, 2009:04:06 15:06:06-07:00, 2009:04:06 15:06:44-07:00, 2009:04:06 15:06:44-07:00, 2009:04:08 23:25:16-07:00, 2009:04:09 10:12:42-07:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /, /, /metadata, /, /metadata, /;/metadata, /metadata, /, /, /
Derived From Instance ID        : xmp.iid:00801174072068118DBBA8F871F22EFF
Derived From Document ID        : xmp.did:FF7F1174072068118DBBA8F871F22EFF
Derived From Original Document ID: xmp.did:D871E97722206811871FF83A40DAF6B9
Derived From Rendition Class    : default
Manifest Link Form              : ReferenceStream
Manifest Placed X Resolution    : 72.00
Manifest Placed Y Resolution    : 72.00
Manifest Placed Resolution Unit : Inches
Manifest Reference Instance ID  : uuid:1f687ec3-fd3a-d84f-8112-f3f5a4af631f
Manifest Reference Document ID  : uuid:F54059D50705DE118459A22F17D56DC7
Doc Change Count                : 151
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Count                      : 16

EXIF Metadata provided by EXIF.tools