Avantree Technology BTHSAH8 Avantree Apico User Manual Z PKQG AH8 V0

Avantree Technology Co., Ltd. Avantree Apico Z PKQG AH8 V0

User Manual

- 1 - - 2 - - 3 -- 4 -- 5 - 1. Product overview1). LED indicator2). Multi-function button (MFB)3). Charging socket4). Mic 2. AccessoriesA. Avantree Apico headsetB. USB charging cableC. Silicone ear budsD. Carry CaseD. User manual 3. Pairing / ConnectingStep 1 Ensure the headset is off.Step 2 Press and hold the MFB for about 3 seconds until LED blinks BLUE and RED alternately.Step 3 Activate Bluetooth on your phone and search the new devices.Step 4 Select “Avantree Apico” to pair and connect. Step 5 Once paired and connected, you will hear “Pairing Completed”.Note:A、Once paired and connected, the headset will automatically connect to your phone whenever you turn the headset on again, provided it is in range.B、The headset will automatically switch itself off if disconnected over 5 minutes.4. Multipoint – Connect with two phones simultaneouslyStep 1 Pair and connect headset with the first phone as above. Then turn headset off.Step 2 Turn on the headset and let it go into pairing mode again by pressing and holding the “MFB” button untill the LED blinks blue and red alternatively. Step 3 Pair and connect headset with the second phone as above.Step 4 Connect with the first phone manually.Note: Once paired and connected, the headset will automatically connect the last paired device firstly and you need to manually connect with another devices. 5. How to use6. LED Indicator LED Indicator Apico Status Blue LED flash 3 times Red LED on 1 second Power off The Red and Blue LED flash alternate Pairing in progress Red LED flash twice Low Battery Red LED steady on Charging in progress Red LED off Charging completed7. How to reset TadpoleStep 1 Get the headset into pairing mode.Step 2 In pairing mode, double click MFB button to restore Apico to default setting.8. How to chargeWhen the battery power is low, the LED will flash red twice and “Battery Low” voice prompt was given every 20 seconds. Please charge the headset via the supplied USB to AC adapter or PC - 6 -www.avantree.comsupport@avantree.comDispose of the packaging andthis product in accordance withthe latest provisions.Z-PKQG-AH8-V0Avantree Technology CO.,Ltd.The 4th Floor, Yurpeng Building, NO.1019 Jiabin Rd, Luohu District, Shenzhen, Guangdong, China.This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help. For a Beer Experiencewww.avantree.com For a Beer ExperienceUser ManualSmallest Bluetooth HeadsetApicoPower on Press and hold the MFB for about 2 seconds until the Blue LED flashes 3 timesPower off Press and hold the MFB for about 3 seconds until the Red LED stay on 1secondGet into pairing mode Press and hold MFB until the LED blinks alternatively BLUE and REDMusic Play Press MFB onceMusic Stop ButtonMFBFunction Press MFB once when playing musicOperation Power on3.Charging socket4.Mic1.LED indicator2.Multi-function Button (MFB) AB C DFCC ID：2AITF-BTHSAH8USB port. It normally takes about 2 hours to fully charge. The LED will stay red when charging and will turn off when charging is complete.Note: AC adapter requirement 5V / 500mA-2A.9. Product Specification • Bluetooth compliance: Bluetooth 4.1• Support profiles: HSP, HFP and A2DP profile• Stand-by time: 80 hours• Talk time: up to 3 hours• Battery charging Time: about 2 hours• Battery type: rechargeable lithium battery• Dimensions: 23 x 20 x 23mm• Input:5V ,500mA• Weight: 3.8gNote: The talk time, music time and standby time may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, music formats and environments. For more FAQ information, please refer to support.avantree.comThe device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu