Avantree Technology BTSP-750-B Wired & Wireless Speakers User Manual Harman Kardon HMI Brand

Avantree Technology Co., Ltd. Wired & Wireless Speakers Harman Kardon HMI Brand

Contents

User Manual

Wired & Wireless SpeakersGGEC Hong Kong Limited, Tel: +852 25861700 P.1/4 AVANTREE  BTSP-750-B  UI Specification Document Table of Revisions: Revision Description Date Changes Checked 0.1 Initial Draft 2016-11-29 Wilson Wong 0.2 Change Power On LED status 2016-12-09 Wilson Wong 0.3 Update Power consumption data 2016-12-29 Wilson Wong
GGEC Hong Kong Limited, Tel: +852 25861700 P.2/4 Preliminary Specification: 1.0 Introduction “AVANTREE PC+BT” is a Computer and Bluetooth dual-function stereo speakers, support for electrical adaptor for the local power supply. Using blue LED lights to display playback and work of the state, the CSR8630 low-power stereo Bluetooth chip, Compliant with Bluetooth V4.0 specification, fully downward compatible with Bluetooth versions. 2.0 Electrical description: 1. External AC Power supply to DC 12VDC, and 1.0A2. Driver 8 ohm speakers Dia. 58mm, and passive Radiator Dia.65.5mm3.0 UI description: 1. Tone notice for BT: Power On(Tone), Power Off(Tone), Connected(Tone), Dis-connected(Tone)2. LED indicator: FF=Fast Flash [100ms/100ms off], SF=Slow Flash [500mS/500mS off],3. Power On slow flashing (BT Waiting), fast flashing (BT Pairing), Solid Blue (BT Connected)LED status BLUE Pairing name : Avantree SP750 SW-ON BT Waiting(SF), Press BT button to BT Pairing(FF) BT Waiting(PC mode) SF BT Pairing FF BT Connected ON SW-OFF X 4. Blue LED flash fast, it means that is under Pairing mode, if no one pairs within 1 mins, the unit will changeto Standby mode, press MFB button to wake-up & auto connecting last paired device. User can play withmobile phone/ pad again.5. When unit at BT mode, user can press and hold MFB button 2 seconds switch to Pairing mode, press andhold MFB button 2 seconds again to Standby mode4.0 Product Highlights: Connectors 1x Fixed 3.5 mm(0.14”) AUX-In cable 1x 3.5 mm(0.14”) Headphone Jack Bluetooth Supported Bluetooth Profiles:A2DP, AVRCP Supported Codec: SBC Operating Range: (2.402GHz-2.480GHz) Up to 10 meters measured in line of sight. Wired & Wireless Speakers
GGEC Hong Kong Limited, Tel: +852 25861700 P.3/4 Controls Volume control with ON/OFF function (Power ON, Volume adjustment) Ideal Application Bluetooth-enabled mobile phones, computers, iPads, iPods, and other handheld devices Phone Function NO 5.0 Power consumption test ELECTRICAL CHARACTERISTICS MINIMUM TYPICAL MAX UNIT Distribution range of input voltage 9 10 12 VDC Standby current 48 58 70 mA Bluetooth is connected current 58 70 mA Playback Current (1khz, 0dB), (Player Samsung Tab2) 400 (1/2volume) 1000 mA SNR 80 dB Speaker output frequency response range 100-20K HZ Distortion + Noise (8 ohm speakers) 10 % Frequency Range 2.4-2.48 GHZ Transmission distance (Class 2) 10 Meter 6.0 Electro-acoustic test, Speaker Test Curve Wired & Wireless Speakers
GGEC Hong Kong Limited, Tel: +852 25861700 P.4/4 7.0 Key definition, Operations and user interface definitions Function Before operation Status switch Volume Knob Multi Function Button LED Description Remark Description Power ON OFF Clockwise to turn ON Blue light On with a tone 6S automatically back to the connection, such as no matching records, will go to standby mode Power OFF ON Anti-clockwise to turn OFF Blue light Off a tone Bluetooth state connected Blue light On Automatic back connection, a tone Connected re-pairing Long press 2s The blue light flashes Manually enter the pairing, a tone. If no connect & matching records, will go to standby mode after 1 min Clear the memory pair Long press 5s Blinking blue light, clear Memory pairing There are beeps, manually re-boot Exit pairing mode Long press 2s Blue light On Manually enter the pairing, a tone Volume + Turn clockwise to increase the volume Volume - Turn anti clockwise to decrease the volume Wired & Wireless SpeakersThe device has been evaluated to meet general RF exposure requirement. The device can be used in portableexposure condition without restriction.FCC ID: 2AIF5-EM200
GGEC Hong Kong Limited, Tel: +852 25861700 P.4/5This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used in portableexposure condition without restriction.FCC ID: 2AITF-BTSP-750-B

Navigation menu