Avantree Technology BTTC-318 Wireless Adapter User Manual Z PKMN TC318 BLK V3

Avantree Technology Co., Ltd. Wireless Adapter Z PKMN TC318 BLK V3

User manual

Avantree Priva IIUSB port of TVWall chargerUSB port of computerMicro USB charging cable1 2Hold for 1 second until LED flashesblue and red.Press and hold the MFB button for 5s, then you will see the BLUE LED is on for 2s.Enter pairing mode ResetCatalogue1. Features & AptX Low Latency 2. What’s in the box?3. Product Overview4. Power ON / Power OFF 5. Pair and connect to 1st Bluetooth headphone/receiver6. Pair and connect to 2nd Bluetooth headphone/receiver7. Reconnection8. Connect Priva III to an audio source9. Use for PC / Laptop 10. Locating Priva III11. Restore Factory Default Settings12. LED indications13. Product Specifications1. Features & AptX Low LatencyAvantree Priva III is a Bluetooth audio transmitter incorporating the latest “aptX Low Latency” technology, for CD-like quality sound with virtually no delay. With multipoint receiver support, Priva III allows you to share the fun and enjoyment of audio with others.Note: Priva III supports true stereo headsets rather than mono A2DP headsets.Note: Audio delay for Fast stream codec is almost the same as aptX Low Latency codec, "but the audio quality of the latter is much higher."Dual link codecUnder Dual Link Mode (connecting with 2 headphones / receivers simultaneously), the transmission codec will be the one with longer latency, eg: If one device supports aptX LL and the other only supports aptX, then the final transmission codec will be aptX; If both headphones supports aptX LL, the final transmission codec will be aptX LL.2. What's in the box:A. Avantree Priva IIIB. Magnetic baseC. 3.5 mm audio cableD. RCA audio cableE. Micro USB charging cableF. User manualG. Quick start guide3. Product Overview 4. Power ON / Power OFF Power ON: Step 1 Power Priva III (no battery attached) via the supplied micro USB cable to your own USB chargers (wall charger / travel charger, etc.) with 5V/500mA~2A, or PC/TV USB port.Step 2 Slide the button to “ON”.Power OFF: Slide the button to “OFF” or unplug the charging cable.5. Pair and connect to 1st Bluetooth headphones/receiverThe first time you turn on Priva III, it will automatically go into pairing mode - the LED flashes BLUE and RED alternately.Step 1 Set your headphones / receiver to pairing mode.Step 2 Keep the devices close and wait until the LEDs on both devices slow down. Now Priva III is ready for use.6. Pair and connect to 2nd Bluetooth headphones/receiverStep 1 Connect your first device as above.Step 2 Set second headphones / receiver to pairing mode.Step 3 Set Priva III to pairing mode again – press and hold MFB for 1 seconduntil the LED flashes BLUE and RED alternately.Step 4 Keep the devices close and wait until the LEDs on both devices slow down.7. ReconnectionThere is no need to pair Priva III each use. It will auto reconnect to the last paired headphones / receiver once you power on both devices and wait for 5~10s. For other paired headphones / receivers, they may auto reconnect to Priva III after waiting 5~10s once powered on. Otherwise, please put both devices into pairing mode.How to get Priva III into pairing mode manually-Under standby mode (except dual link mode), press and hold MFB for 1 second until the LED flashes BLUE and RED alternately.8. Connect Priva III to an audio sourcePriva III supports ANALOG audio output (3.5mm / RCA audio jack or via Digital to Analog Audio Converter). Please connect Priva III to correct audio output on your TV or any other device.How to verify the correct audio output: Simply plug in wired earphones to test the sound. If they can work with the socket, you can connect Priva III to it.OptimalAvoidFront Back9. Use for PC / Laptop Priva III also supports Micro USB audio input, and the sound quality is much greater than the ANALOG audio input. You can use it in this way on PC / Laptop (but most TVs will not support this) 10. Locating Priva IIITo achieve greater operational range, please don’t hang Priva III behind TV.11. Restore Factory Default SettingsYou may need to reset Priva III if it is not working as expected, such as not pairing, wrong LED indication, audio issues, etc. When Priva III is reset to factory default settings, all the paired device information will be erased.Step 1 Get Priva III into pairing mode – press and hold MFB for 1 second until the LED flashes BLUE and RED alternately. Step 2 Press and hold the MFB button for 5s, then you will see the BLUE LED is on for 2s.Step 3 Then it will enter pairing mode automatically Dispose of the packaging andthis product in accordance withthe latest provisions. FCC ID: 2AITF-BTTC-318Z-PKMN-TC318-BLK-V3www.avantree.comsupport@avantree.com1161514131110987645To take advantage of the better performance of the APTX Low Latency Codec, the receiver must support the same codec. If the receiver only supports the normal AptX codec, or the SBC one, those codecs will be used instead. Audio delay when paired with different headphones/receiver-Headphones/receiver support - The audio delay will beaptX Low Latency codec ~ 40msaptX codec ~ 70msFast Stream codec ~ 40msSBC codec (most standard Bluetooth audio) ~ 220ms- 5 -- 3 -- 7 - - 8 - - 9 - - 10 -- 4 -- 1 -- 6 -- 2 -Connect 1st headphoneConnect 1st headphone as aboveConnect to TV’s audiooutput port EnjoyConnect 2nd headphonePress & hold for 1 secinto pairing mode again,wait until connected- 11 - - 12 - - 13 - - 14 -- 15 - - 16 - - 17 -12. LED indications 13. Product Specifications• Bluetooth version: 4.2• Bluetooth profile: A2DP • Audio codec: SBC, Fast Stream, AptX, AptX-LL• Operating Range: Up to 30 meters• Weight: Body approx. 16 g; Base approx. 7 g• Size: 48 mm(L) x 48 mm(W) x 15 mm(H)Declaration of ConformityThis device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.FCC ID: 2AITF-BTTC-318 To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.EABCGD Hwww.avantree.comUser ManualGVZ>2U]2GZKTI_3[RZOVUOTZ(R[KZUUZN:XGTYSOZZKXPrivaSimply ConvenientFwww.avantree.comUser ManualWireless Adapter621 !"# "$%&&'543FUNCTIONSet Priva III to pairing mode – Hold for 1 seconds until flashes BLUE and RED alternatelyReset Priva III – In pairing mode, Hold for 5 seconds until BLUE LED is on for 2sPower on / off Priva IIIAnalog Audio inputConnect to USB charger for powerMicro USB Audio input25()*"")+,7 For more detailed information, please refer to included Quick User Guide.EnjoyConnect to TV’s audiooutput port ConnectedWait for 5~15 secs, both LEDs slow downPairingGet headset into pairing modeTurn on, wait until LED blinks blue & red9IGTSKLUX]GXXGTZ_XKMOYZXGZOUT3.5mm audio jack RCA audio jack Optical outputStatus LED indicatorPower on Blue LED on for 1 secondPairing mode Connected with SBC codec Blue LED flashes once every 5 secondsConnected with Faststream codec Blue LED flashes twice every 5 secondsConnected with aptX codec White LED flashes once every 5 secondsConnected with aptX-LL codec White LED flashes twice every 5 secondsReconnect Restored factory default settings Blue LED on for 2 secondsLEDs blink blue and red alternatelyBlue LED flashes once every 2 secondsON OFFNote: ,!&!-!.,./#)(#0)8.*0(#09):-(((:)-!99;! ,<=!!>"#?$::-(((=!89!$Avantree Priva IIAvantree Priva III43*!!9!&!@!:)A:;-$>.-:-(((?>@-?$More FAQs on support.avantree.comVideo user guide: Search “Avantree Priva III” on Youtube.comTelephone support refer to http: //www.avantree.com/contact-usEmail support: support@avantree.comB$%.("C.)+3"# "(::)

Navigation menu