Avantronics AS6P Bluetooth Stereo Headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2277575
Application ID	l06XLg12EsPhDhN4ZPH1QQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.97kB (224649 bits)
Date Submitted	2014-05-27 00:00:00
Date Available	2014-05-27 00:00:00
Creation Date	2017-11-01 06:07:52
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-01 06:07:52
Document Title	Microsoft Word - user manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	elena

1. Product Description
Avantree Jogger Pro (AS6P) is a lightweight Bluetooth stereo headphone with
integral microphone. It is great for use during active pursuits, such as jogging and
exercising. It has a trendy, fashionable sports design and is splash proof. The
headset is equipped with Bluetooth 4.0 technology, so you can connect two
devices simultaneously and enjoy excellent sound quality from the aptX codec.
Immerse yourself in rich audio from your smartphone, Bluetooth enabled MP3
player or tablets. Jogger Pro is the perfect companion for your workout routine.
2. 1Product Overview
(1). Speaker
(2). Next
(3). Led indicator
(4). Previous
(5). Headband
(6). Charging socket
(7). Multi-function button(MFB)
(8). Microphone
(9). Volume down
(10). Volume up
What’s in the box:
z Avantree Jogger Pro
z USB charging cable
z Silicone ear buds
z Carrying pouch
z User manual
z Gift card
Optional:
z Travel charger/Car charger/Armband
3. Charging
Avantree Jogger Pro uses a 2.0mm jack charging socket.
1) For the first charge, please charge the device for at least 2.5 hours to make
sure the headset is fully charged and the battery reaches its full capacity.
2) Afterwards, each charge cycle will take up to 2.5 hours.
3) The LED will indicate red when charging and will turn off when charging is
complete.
4) If you have not used the item for a few months, the LED might not
immediately light red when first charging. In this case, it may take 15-35
minutes before the LED lights red.
Notice:
Use an Avantree certified charger only. Or consult Avantree support before
z
using any other third party charger.
When battery power is low, the red indicator LED will flash red once every 10
seconds and a “DUDU” sound will come up every one minute.
4. Turn on / off
Turn on: From o ff, pre ss and hol d “MFB” for around 4 seconds, un til the LED
indicator shows blue.
Turn off: From on , pre ss and hol d “ MFB” for arou nd 4 se conds un til the LED
indicator shows red.
5. Working with mobile phone (Tutorial online)2
It is important to pair the headset with your Bluetooth enabled mobile phone for
first time use.
5.1 Pairing procedure:
A. Ensure the headset is off.
B. Press and hold the MFB button (about 7-10 seconds) until the LED blinks
blue and red alternately.
C. Search for the headset from your phone.
D. Once “Avantree Jogger Pro’’ is found in the search list, follow the
indicated steps and enter pin code 0000 to pair (some phones do not
request the pin code).
E. Connect the headset to your phone.
F. Your headset is now ready for use.
Once paired and connected, the headset will be automatically connected to your
phone whenever you turn the headset on again, provided your phone is within
range.
We find most of the online technical support questions are caused by improper
pairing between the headset and the Bluetooth device. Please follow the above
instructions step-by-step.
5.2 Basic Operations:
● Answer a call:
To answer a call: Press “MFB” once to answer the call.
To answer a second call: Press “MFB” once to answer a second call and end
the first call simultaneously.
● End a call: Press the “MFB” button once to end a call.
● Reject a call:
Reject a call: Press and hold the “MFB” button for 3 seconds to reject a call.
Reject a second call: Press the “Previous” button once to reject a second
call.
● Voice Dial: Short press both ”V+” and “V-” whilst in standby mode, then say
the voice tag you wish to call. (Note: Make sure your phone supports voice
dialing.)
● Last number redialing: In standby mode, double click the “MFB” button.
● To Switch a call between headset and mobile phone:
From Headset to Mobile Phone: During a call, press and hold “MFB” for 2
seconds to transfer the call to your mobile phone.
From Mobile Phone to Headset: During a call, press and hold “MFB” for 2
seconds to transfer the call to your headset.
● To Mute & Unmute during a conversation:
Mute the microphone: Press and hold the “Next” button until you hear a short
beep. In mute status, you will hear two short beeps every 3 seconds.
Unmute the microphone: Press and hold the “Next” button again until you
hear a further short beep.
● To Restore Default Settings: In standby mode (just turn it on), press and
hold “Next” button for 8 seconds until the indicator flashes blue and red. The
headphone has now been reset to its original settings. After being powered on
again, it will enter pairing mode automatically.
5.3 Music Streaming
Please activate your phone’s music player before listening to music on the
headset. For some phones, music will automatically be heard on your headset,
other phones you will need to manually transfer music from your phone to the
headset.
z Volume Up: Press and hold the “Volume +” button, or for small incremental
increases, short press the “Volume +” button.
z Volume Down: Press and hold the “Volume -“ button, or for small
incremental decreases, short press “Volume-“ button.
z To Play Music : Press the “MFB” button.
z
Pause : Press the “MFB” button again.
Previous Track: Press the “Previous” button.
Next Track: Press the “Next” button.
Notes: 1) Some functions are dependent on the mobile phone being used with
the headset. Therefore, certain features might not work with all phones
as some phones do not support them.
2) For some phones, when power saving mode is activated with animated
moving images, music output may be interrupted. If this happens, try
changing the power saving mode to a non-moving image.
5.4 Advanced Operations - Multipoint
5.4.1 Pairing with two mobile phones
1) From OFF, press and hold button MFB for 7-10 seconds until the LED
indicator blinks blue and red alternately, then pair with the first phone as per
normal (see Section 5.1).
2) Now press and hold the “V-” button until the LED indicator blinks blue
and red again, then pair with the second phone in the normal manner.
3) Power off the headset, and then turn it on again. It will automatically
connect with the last paired phone. Then connect the first phone manually.
5.4.2 Answer a second call during a call (3 way call or two link function)
When a second call is received Press and hold ”V+” button for 2 seconds to hold the first call and answer
the second call.
Press “MFB” once to answer a second call and end the first call
simultaneously.
5.4.3 Reject a second call during acall (3 way call or two link function)
When a second call is received, press the “Previous” button once to reject
the second call.
5.4.4 Switch between 2 phone calls (3 way call or two link function)
When two calls are in progress, press and hold the “V+” button for 2
seconds to switch between each call.
To end the currently active call and switch to the other call, short press the
“MFB” button once.
6. Working with a PC or Laptop (Tutorial online)
For computers running Microsoft Windows with Built-in Bluetooth
supporting A2DP. For other systems, you might need a Bluetooth dongle to
work with your computer. Your Bluetooth headset doesn’t need any special
drivers to set up. For any updated driver information, please refer to your
computer manufacturer or to the dongle manufacturer.
6.1 Pairing procedure:
A. Ensure your computer has built-in Bluetooth as above and that Bluetooth is
turned on.
B. Double click the Bluetooth icon and click “Add a new device”.
C. Once the “Avantree Jogger Pro’’ is found in the search list, follow the steps
indicated by the computer. If asked for a pin code during this process,
enter “0000”.
D. Pair the headset to your PC.
E. Your headset is now ready for use.
6.2 Streaming Music
Before streaming music, you need to change the sound settings. Go to “Control
Panel” – “Sound” – “Playback” and change the audio setting to “Bluetooth
Stereo Audio”.
Controlling music while streaming
● Pause: During music streaming, press the “MFB” button to pause. Press
the button again to resume streaming.
● Volume Up: Press and hold the “Volume +” button, or short press the
button to get small, incremental increases.
● Volume Down: Press and hold “Volume –” button, or short press the
button for small, incremental decreases.
● Next / Previous track: These two functions are dependent on your
computer system - some systems can be controlled from the headset with the
next / previous buttons, some systems cannot.
6.3 For Skype Calls
Some systems can change the required sound settings automatically and
you can make Skype calls immediately.
z Other systems will need changes to the sound settings before you are able
to make Skype calls. Go to “Skype Tools” – “Options” - “Sound Devices”.
Select each of the “Audio in” / “Audio Out” / “Ringing” options and change all
three modes to “Bluetooth AV Audio” then save the settings. You will then be
able to make Skype calls.
7. Product Specification
Bluetooth V4.0 with EDR
Support profiles: Headset, Handsfree, A2DP, AVRCP
Operational range: Class 2, 10 meters
Battery: 170mA rechargeable lithium battery
Talk time: up to 13 hrs
Music time: up to 12 hrs
Standby time: up to 40 days
Headset weight: 23g
Headset size: 85mm(L)x72mm(W)X25.5mm(H)
The talk and standby times may vary when used with different mobile phones or
other compatible Bluetooth devices and are also dependant on different usage
styles, settings and operating environment.
8. Safety Information
To avoid any damage to or malfunction of the device, do not drop it from high
places.
Keep this device away from water, other liquids or high humidity environments.
If the device is exposed to water, other liquids or excessive moisture, do not
operate it. This will avoid risk of electrical shock to yourself and risk of
explosion or further damage to the device.
Do not place or keep this device near any heat source, such as direct sun light,
radiators, stoves or other apparatus which produces heat. It may cause the
battery to explode, or degradation of battery performance and life.
Do not attempt to modify, repair or disassemble this device yourself.
(Especially the battery: Interfering with the battery may cause an explosion).
Attempting to modify or repair the device yourself this will void the warranty.
Do not place heavy objects on this device.
Use only the supplied or other approved chargers.
Replacement or repair must be performed by a qualified service center or by
the manufacturer.
Unplug this device when unused for long periods of time or during lightning
storms.
CAUTIONS: ELECTRIC SHOCK HAZARD
The battery in this device may present a risk of fire or chemical burns if
mistreated.
9. Declaration of Conformity
9.1. EU
This product is CE certified according to the provision of the R&TTE Directive
(99/5/EC).
We declare that this product is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
9.2. Trademark Statement
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
Avantree is a trademark owned by Avantronics limited.
10. Warranty
Please refer the warranty card included in the pack.
Online Tutorial & Technical Support
For more information about this product and other Avantree Bluetooth products,
including video user guides, product tutorials and online technical support, please
visit the www.avantree.com ‘Product Tutorial’ and ‘Download’ pages.
Due to the nature of our products, there may be software updates made without
notice. Please always refer to the Avantree website for the latest information.
Warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : elena
Create Date                     : 2014:05:16 13:31:06+08:00
Modify Date                     : 2014:05:27 09:06:56-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2014:05:27 09:06:56-07:00
Format                          : application/pdf
Title                           : Microsoft Word - user manual.doc
Creator                         : elena
Document ID                     : uuid:ff7348c2-5070-4640-a5bd-fddac7c37433
Instance ID                     : uuid:c9b9e331-a6fb-47f1-867a-538e11056854
Page Count                      : 17

EXIF Metadata provided by EXIF.tools