Avaya Bogen Pcm Paging Control System Installation And Use Manual

2015-06-01

• Table of Contents
• 1. Introduction
  • 1.1. Voice Channel
  • 1.2. Background Music
  • 1.3. Signaling Channel
  • 1.4. Other Features
• 2. Before You Start
  • 2.1. Select Options
  • 2.2. Package Contents
• 3. Installation
  • 3.1. Adding PCMZPM Modules
  • 3.2. Mounting the PCM System
  • 3.2.1. Wall Mounting
  • 3.2.2. Rack Mounting
• 4. LUPCMALL Feature Callouts
  • Descriptions and Locations
• 5. System Wiring Connections
  • 5.1. Telephone System Connections
  • 5.2. PBX Loop Start Trunk Port
  • 5.3. PBX Ground Start Trunk Port
  • 5.4. PBX Page Port
  • 5.5. PBX Analog Station Port
  • 5.6. Night Ringer
  • 5.7. Over Ride Input
• 6. Paging Amplifier Connections
• 7. Background Music
  • 7.1. Helpful Hints When Connecting Background Music to the Paging Control System
  • 7.2. Background Music Continuously Supplied To All Zones Not Being Paged
  • 7.3. Background Music Supplied By Same Amplifier That Supplies Paging, Music Input Available On Amplifier
  • 7.4. Background Music Supplied by Same Amplifier Supplying Paging, No Dedicated Music Input Available On Amplifier
  • 7.5. Background Music Or Different Background Music Supplied To A Select Group Of Zones
  • 7.5.1. Zone Modules Working With 70V Speakers
  • 7.5.2. Zone Modules Working With Self-Amplified Speakers
  • 7.6. Inhibiting Background Music In Select Zones
• 8. Zone Speaker Wiring and Setup
  • 8.1. Wiring to 70V Speakers
  • 8.2. Wiring to Self-Amplified Speaker or Dedicated Amplifier
  • 8.3. Setting a Zone for Talk Back Operation
• 9. Optional Wiring
  • 9.1. CPU to Emergency Signaling
  • 9.2. CPU to Re-Synch (Master Clock)
  • 9.3. Relay Drivers
• 10. Power-Up of PCM and Associated Equipment
  • 10.1. Power-Up Sequence
  • 10.2. Priority Order
• 11. System Programming
  • 11.1. Programming Paging Zone Groups
  • 11.1.1. To Erase A Zone Paging or Signaling Group
  • 11.2. Programming Signaling Zone Groups
  • 11.3. Interface Default Timer
  • 11.4. Interface VOX Timer
  • 11.5. Dialing Timeout
  • 11.6. Single Amp BGM Enable
  • 11.7. Programming the Real Time Clock
  • 11.7.1. Clock Synchronization
  • 11.8. Time-Triggered Events
  • 11.9. Setup Tone
  • 11.10. Reset Default Values
  • 11.11. Relay Contacts
• 12. Feature Codes and Defaults
• 13. Paging: How To Use The PCM
  • 13.1. Paging Zones
  • 13.2. How To Page Zones
  • 13.3. How To Make An All-Call Page
  • 13.4. How To Page A Zone Group
  • 13.5. How To Make A Code Call
  • 13.6. How To Make A Pattern Code Call
  • 13.7. How To Make An Echo Code Call
• 14. Testing and Troubleshooting
  • Functional Test Guide
    • Procedure A
    • Procedure B
• A. Applications
  • Typical Connections
  • Connecting to an External Audio Source
• B. Tones
• C. Glossary of Programmable Features
• D. Configuration Forms