Avaya Ip Line Users Manual Description, Installation, And Operation

2015-06-01

• Title page
• Revision history
• Contents
• About this document
  • Subject
    • Structure
  • Applicable systems
  • Conventions
  • Related information
• Description
  • Contents
  • Introduction
    • Features
    • Voice Gateway Media Cards
  • Interworking
  • Applicable systems
    • Unsupported products
  • System requirements
    • OTM 2.2 and Element Manager
  • System configurations
    • Meridian 1
    • CS 1000 systems
  • Software delivery
  • Required packages
  • IP Line package components lists
    • CS 1000 and Meridian 1 package components
    • IP Line 4.0 Media Card 8-port card package components
    • Documentation
  • Voice Gateway Media Cards
    • Capacity
    • Media Card controls, indicators, and connectors
    • ITG-P 24-port card controls, indicators, and connectors
    • Functional description of the Voice Gateway Media Cards
    • IP Phone registration
    • Virtual Terminal Manager
    • Interactions with IP Phones
    • Signaling and messaging
    • Signaling protocols
    • ELAN TCP transport
  • Virtual superloops, virtual TNs, and physical TNs
    • Virtual TNs
  • Licenses
    • License limits
  • Zones
  • Administration
    • IP Line 4.0 application in OTM 2.2
    • Element Manager
    • Command Line Interface
    • Overlays
• Features
  • Contents
  • Introduction
  • NAT Traversal feature
    • Echo Servers
    • Mapping
    • NAT Mapping Keep Alive
    • Mute and Hold considerations
    • NAT and VLANs
    • NAT Traversal and Proactive Voice Quality Management
    • Configuring NAT Traversal in Element Manager
    • Configuring NAT Traversal in LD 117
    • CLI commands
  • Firmware download using UNIStim FTP
    • CLI commands
  • Personal Directory, Callers List, and Redial List
  • IP Call Recording
    • Administration
  • pbxLink connection failure detection
    • Displaying pbxLink information
  • LD 117 STAT SERV enhancement
    • pbxLink information
    • Application information
  • IP Phone support
    • IP Phone Key Expansion Module
  • Corporate Directory
  • Element Manager support
    • BOOTP and CONFIG.INI
  • Call Statistics collection
    • Counting IP Phones
    • IP Phone Zone Traffic Report 16
  • User-defined feature key labels
  • Private Zone configuration
    • Shared Zone
    • Private Zone
    • LD 117
  • Run-time configuration changes
  • Network wide Virtual Office
  • Branch Office and Media Gateway 1000B
  • 802.1Q support
    • Configuration of 802.1Q on IP Phones
    • Control of the IP Phone’s 802.1Q
    • 802.1Q and the Voice Gateway Media Cards
  • Data Path Capture tool
  • IP Phone firmware
    • Minimum firmware version
    • Firmware download
    • Meridian 1
    • CS 1000 systems
  • Graceful Disable
    • Operation of the LTPS DISI
    • Feature operation of the Voice Gateway DISI
  • Hardware watchdog timer
    • Watchdog Timer and Voice Gateway Media Card firmware
  • Codecs
  • Set type checking and blocking
  • Enhanced Redundancy for IP Line nodes
• Personal Directory, Callers List, and Redial List
  • Contents
  • Introduction
    • Virtual Office
    • Media Gateway 1000B
    • User key for Personal Directory, Callers List, and Redial List
  • Personal Directory
  • Callers List
    • Call log options
  • Redial List
  • IP Phone Application Server configuration and administration
    • Configure the IP Phone Application Server and remote backup
    • Configure IP Phone Application Server on a separate Signaling Server
    • Alarms
  • IP Phone Application Server database maintenance
    • IP Phone Application Server database backup
    • Full database recovery
    • Selective database recovery for a single user
    • Fault clearance
  • Call Server configuration
  • Password administration
    • Initial password
    • Password guessing protection
    • Forgotten password
  • User profile management
    • User profile management in Element Manager
• Codecs
  • Contents
  • Introduction
    • Pre-defined codec table
    • Codec selection
  • Codec configuration
    • Codec selection in OTM 2.2
    • Codec selection in Element Manager
  • Codec registration
    • Codec registration for IP Phones
    • Codec registration for DSPs
    • Voice Gateway codec registration
  • Codec negotiation
    • Codec sorting
  • Codec selection
    • H.323’s Master/Slave algorithm
    • Best Bandwidth Codec Selection algorithm
• Installation and configuration summary
  • Contents
  • Introduction
  • Before you begin
  • Installation summary
  • Voice Gateway Media Card installation summary sheet
• Installation and initial configuration of an IP telephony node
  • Contents
  • Introduction
    • Installation and configuration procedures
  • Equipment considerations
    • Required equipment
    • Optional equipment
  • Install the hardware components
    • Summary of installation steps
    • Identify the IPE card slots on a CS 1000M or Meridian 1
    • Installing and cabling the ITG-P 24-port line card
    • Installing and cabling the Media Card 8-port and 32-port line cards
    • Installing the NTCW84JA ITG-specific I/O Panel filter connector for a Large System
    • Voice Gateway Media Card ELAN and TLAN network interfaces
  • Initial configuration of IP Line 4.0 data
    • Summary of procedures
    • Configure IP address for the system active ELNK Ethernet interface (LD 117)
    • Configure VoIP bandwidth management zones (LD 117)
    • Element Manager for Zone Configuration
    • Configure physical TNs (LD 14)
    • Using Element Manager for Voice Gateway channels
    • Configure virtual superloops for IP Phones (LD 97)
    • Configure IP Phone features in LD 11
    • Configure the IP Phone KEM
    • IP Phone dedicated soft keys
  • Node election rules
• Configuration of IP telephony nodes using OTM 2.2
  • Contents
  • Introduction
  • Configure IP Line data using OTM
    • Launch OTM and the IP Line 4.0 application
    • Add a site, system, and customer
    • Manually add an IP Telephony node
    • Configure the card properties of the Voice Gateway Media Card
    • Configure DSP profile data
    • Configure SNMP traps and ELAN gateway routing table
    • Configure node synchronization with the Call Server
    • Configure the Call Server ELAN IP address and the TLAN voice port
    • Configure security for SNMP access
    • Configure SNMP access and community name strings
    • Configure SNMP trap destinations for an IP Telephony node
    • Configure file server access
    • Configure QoS
    • Configure SNTP
  • Transmit node configuration from OTM 2.2 to the Voice Gateway Media Cards
    • Set the Leader 0 IP address
    • Transmit node and card properties to Leader 0
    • Transmit card properties to all cards in the node
  • Upgrade the Voice Gateway Media Card software and IP Phone firmware
    • IP Phone firmware installation and upgrade
    • IP Phone firmware upgrade from a new Voice Gateway Media Card
    • Verify card software and IP Phone firmware
    • Upgrade options
    • Upgrade Voice Gateway Media Card software
    • Upgrade the Voice Gateway Media Card software
    • Upgrade the IP Phone firmware
  • Configure OTM Alarm Management to receive IP Line SNMP traps
  • Assemble and install an IP Phone
  • Change the default IPL> CLI Shell password
  • Configure the IP Phone Installer Passwords
• Configuration of IP Telephony nodes using Element Manager
  • Contents
  • Introduction
    • Upgrade the ITG-P 24-port line cards to IP Line 4.0
  • Configure IP Line 4.0 data using Element Manager
    • Internet Explorer browser configuration
    • Launch Element Manager
    • Summary of procedures
    • Manually add an IP Telephony node
    • Configure SNMP trap destinations and community name string access
    • Configure Voice Gateway Profile data
    • Configure Quality of Service
    • Configure ELAN IP address (Active ELNK), TLAN voice port, and routes (Small Systems and CS 1000S only)
    • Configure file server access
    • Configure loss and level plan
    • Add card and configure the card properties of the Voice Gateway Media Card
    • Submit and transfer the node information
  • Transfer node configuration from Element Manager to the Voice Gateway Media Cards
    • Setting the Leader IP address
    • Transmit node properties
    • Configure the Follower cards
  • Upgrade the Voice Gateway Media Card software and IP Phone firmware
    • IP Phone 2001, IP Phone 2002, and IP Phone 2004 firmware requirements
    • Default location of firmware files
    • IP Phone Firmware upgrade from a new Voice Gateway Media Card
    • Determine Voice Gateway Media Card software version
    • Determine the IP Phone firmware version
    • Download the current software and IP Phone firmware
    • Upload the software and firmware files to the file server
    • Upgrade the Voice Gateway Media Card software
    • Reboot the Voice Gateway Media Card
    • Upgrade the IP Phone firmware
    • Upgrade the Voice Gateway Media Card firmware
  • Configure Alarm Management to receive IP Line SNMP traps
  • Assemble and install an IP Phone
  • Change the default IPL> CLI Shell password
  • Configure the IP Phone Installer Passwords
  • Import node configuration from an existing node
• IP Line 4.0 administration
  • Contents
  • Introduction
  • IP Line feature administration
    • Corporate Directory
    • Private Zone configuration
    • Virtual Office
    • e911
    • 802.1Q
  • Password security
    • SNMP community names strings
    • IPL> CLI Shell user name and password
    • Node password synchronization
    • IP Phone Installer Password
    • Default user name and password
  • IP configuration commands
  • TLAN configuration commands
  • Display the number of DSPs
  • Display IP Telephony node properties
  • Display Voice Gateway Media Card parameters
  • Packet loss monitor
  • Transfer files using the CLI
  • Download the IP Line 4.0 error log
  • Reset the Operational Measurements file
• IP Line administration using OTM 2.2
  • Contents
  • Introduction
  • OTM administration procedures
    • Operational Measurement report scheduling and generation
    • Viewing the IP Line log files
  • Back up and restore OTM data
  • Update IP Telephony node properties using OTM
    • Add a Voice Gateway Media Card to the node
    • Delete a Voice Gateway Media Card from the node
    • Delete the Leader Voice Gateway Media Card from the node
    • Change the IP addresses of an IP Telephony node in OTM
  • Update Voice Gateway Media Card card properties
    • Retrieve command
  • Add an IP Telephony node in OTM by retrieving an existing node
  • IP Line CLI access using Telnet or local RS-232 maintenance port
    • Telnet to a Voice Gateway Media Card
• IP Line administration using Element Manager
  • Contents
  • Introduction
  • Element Manager administration procedures
    • Turn off browser caching
    • IP Line Operational Measurement report scheduling and generation
    • View IP Line log files
  • Backup and restore data
    • Backup
    • Restore the backed up files
  • Update IP Telephony node properties
    • Add a Voice Gateway Media Card to the node
    • Delete a Follower Voice Gateway Media Card from the node
    • Delete the Leader Voice Gateway Media Card from the node
    • Change the IP addresses of an IP Telephony node in Element Manager
    • Restart a Voice Gateway Media Card
    • Restart all the Voice Gateway Media Cards
  • Update other node properties
  • Telnet to a Voice Gateway Media Card using Virtual Terminal
  • Check the Voice Gateway Channels
  • Setting the IP Phone Installer Password
• Voice Gateway Media Card maintenance
  • Contents
  • Introduction
  • Faceplate maintenance display codes
  • System error messages
  • IP Line and IP Phone maintenance and diagnostics - LD 32
    • TNs
    • Maintenance commands for the IP Phone
  • IP Line CLI commands
    • General purpose commands
    • File transfer commands
    • IP configuration commands
    • Reset commands
    • DSP commands
    • Upgrade commands
    • IPL> shell commands
    • IP Phone Installer Password commands
    • Voice Gateway commands
    • Data Path Capture Tool commands
    • Translation IP/DN commands
    • Graceful TPS commands
    • IP Phone Loss Plan (UK) commands
    • Patch and Patching Tooling tool commands
    • General trace tool commands
    • Protocol trace tool commands for the Network Connection Service
  • Lamp Audit and Keep Alive functions
    • Maintenance audit
  • Voice Gateway Media Card self-tests
  • Troubleshoot a software load failure
    • Warm reboot of the Voice Gateway Media Card
    • Test the Voice Gateway Media Card DSPs
    • Work with alarm and log files
  • Troubleshoot an IP Phone installation
  • Maintenance telephone
  • Upgrade Voice Gateway Media Card 8051 XAController firmware
    • Upgrade the ITG-P 24-port line card 8051 XAController firmware
    • Upgrade the Media Card 8051 XAController firmware
  • Replace the Media Card’s CompactFlash
• Voice Gateway Media Card maintenance using OTM 2.2
  • Contents
  • Introduction
  • Replace a Voice Gateway Media Card
    • Replace a Leader Voice Gateway Media Card
    • Replace a Follower Voice Gateway Media Card
    • Verify the Voice Gateway Media Card loadware and firmware
    • Transmit card properties to the cards
  • Access the IPL> CLI from OTM
  • Add a “dummy” node for retrieving and viewing IP Telephony node configuration
    • Retrieve IP Line configuration from the IP Telephony node
• Voice Gateway Media Card maintenance using Element Manager
  • Contents
  • Introduction
  • Replace a Voice Gateway Media Card
    • Replace a Follower Voice Gateway Media Card
    • Replace a Leader Voice Gateway Media Card
    • Verify Voice Gateway Media Card software and firmware
  • Add another Voice Gateway Media Card
  • Access CLI commands from Element Manager
    • Sample Output of Element Manager CLI commands
  • Access the IPL> CLI from Element Manager
• Convert IP Trunk Cards to Voice Gateway Media Cards
  • Contents
  • Introduction
  • Before you begin
  • Convert the IP Trunk cards
  • Add the converted cards to an IP Telephony node
    • Manually add converted Voice Gateway Media Cards to the existing IP Telephony node
    • Import all converted Voice Gateway Media Cards into a new IP Telephony node
• Appendix A: NAT router requirements for NAT Traversal feature
  • Contents
  • Description
  • Requirements
    • Cone NAT
    • Time-out configuration
    • Hairpinning
    • Unidirectional packet flow
    • Firmware versions
  • Natcheck output
• Appendix B: I/O, maintenance, and extender cable description
  • Contents
  • Introduction
  • NTMF94EA I/O cable
  • Connector pin assignments
    • Prevent ground loops on connection to external customer LAN equipment
  • NTAG81CA maintenance cable description
  • NTAG81BA maintenance extender cable
  • Replace the NT8D81BA cable with the NT8D1AA cable and install the NTCW84JW special IPE filter
    • Tools list
    • Remove the NT8D81BA cable
    • Install the NTCW84JA filter and NT8D81AA cable
• Appendix C: RM356 Modem Router
  • Contents
  • Introduction
  • RM356 Modem Router security features
  • Install the RM356 Modem Router
  • Configure the RM356 Modem Router from the manager menu
  • RM356 Modem Router manager menu description
• Appendix D: Product integrity
  • Contents
  • Introduction
  • Reliability
    • Mean Time Between Failures (MTBF)
    • Voice Gateway Media Card power consumption
  • Environmental specifications
    • Temperature-related conditions
  • Electrical regulatory standards
    • Safety
    • Electro-Magnetic Containment
• Appendix E: Subnet Mask Conversion from CIDR to Dotted Decimal Format
  • Introduction
• Appendix F: Download IP Line 4.0 files from Nortel Networks web site
  • Contents
  • Introduction
  • Download files from Nortel Networks web site
• Index