Averatec 3200M Notebook Computer W/802.11 b/g WLAN User Manual

Averatec Inc., Notebook Computer W/802.11 b/g WLAN

User Manual

UUsseerr’’ss MMaannuuaall
ii Table of Contents CHAPTER 1 GETTING STARTED 1 Getting Started ................................................................................... 2 Inventory ............................................................................................. 3 Safety and Maintenance .................................................................... 4 Checklists ........................................................................................... 5 Features .............................................................................................. 6 Where to Look For Information......................................................... 6 Quick Start.......................................................................................... 7 Loading Windows .............................................................................. 8 Adjusting the Volume ........................................................................ 9 Adjusting the Brightness .................................................................. 9 Turning off Your Computer............................................................. 10 Making a Startup Disk...................................................................... 10 Tips for New Owners ....................................................................... 11 CHAPTER 2 GETTING STARTED 13 Hardware and Software ................................................................... 14 Front View......................................................................................... 15 Left View............................................................................................ 16 Right View......................................................................................... 17 Bottom View...................................................................................... 18 LCD Status Indicators...................................................................... 19 Power Indicators .............................................................................. 20 Function Keys .................................................................................. 20 Numeric Keypad............................................................................... 21 Touchpad .......................................................................................... 21 Connecting the Floppy Disk Drive ................................................. 23 Disk Drives........................................................................................ 23 Connecting the Printer .................................................................... 25 The PC Card Slot.............................................................................. 26 Memory.............................................................................................. 27 The Graphics System ...................................................................... 29 Communication Components......................................................... 32
iii CHAPTER 3 MAKING CONNECTIONS 33 Making Connections........................................................................ 34 Left Side Connectors....................................................................... 35 Right Side Connectors .................................................................... 35 Front Side Connectors .................................................................... 36 CHAPTER 4 SYSTEM SOFTWARE 37 System Software .............................................................................. 38 System Recovery ............................................................................. 39 CHAPTER 5 POWER MANAGEMENT 43 Power Management ......................................................................... 44 Monitoring Battery Power ............................................................... 45 Power Saving Modes ....................................................................... 46 Power Saving Tips ........................................................................... 48 When to Replace the Battery .......................................................... 48 Heat Considerations ........................................................................ 49 CHAPTER 6 USING THE BIOS SETUP UTILITY 51 Using the BIOS Setup Utility........................................................... 52 Navigating and Entering Information in BIOS............................... 53 The Main Menu ................................................................................. 54 Standard CMOS Setup..................................................................... 55 Standard Feature Description......................................................... 56 Advanced CMOS Setup ................................................................... 57 Power Management ......................................................................... 59 Auto-Detect Hard Disk..................................................................... 61 Change User Password................................................................... 62 Change Supervisor Password........................................................ 62 Auto Configuration with Optimal Settings .................................... 62 Exiting and Saving........................................................................... 62 APPENDIX A FREQUENTLY ASKED QUESTIONS 63 Frequently Asked Questions .......................................................... 64 APPENDIX B STATEMENTS 67
iv Statements........................................................................................ 68 European Notice............................................................................... 70 UL CAUTION..................................................................................... 70 Canadian Department of Communications ................................... 71 Battery Disposal............................................................................... 72 CAUTION FOR ADAPTER................................................................ 72 BATTERY CAUTION......................................................................... 72 CLASS 1 LASER PRODUCT............................................................ 73 FCC warning statement................................................................... 73 IC warning statement....................................................................... 74
CChhaapptteerr 11 IInnttrroodduuccttiioonn
Chapter 1 — Introduction 2 Getting Started Congratulations on your purchase of the Notebook computer! Your new notebook features the most innovative advances in portable computing technology. It combines state-of-the-art ergonomics with sophisticated architecture to provide you with a personal computer that is compact, powerful, and easy to use. Designed for a wide range of general, business, and personal productivity applications, the notebook is an ideal choice for use in the office, at home, and on the road. For maximum expandability without compromising portability, the notebook accommodates a number of modules, including CD-ROM/DVD/CD-RW/Combo Drive, three USB ports and one PCMCIA card slot. The high capacity hard disk drive provides you with plenty of storage space for multimedia files and applications. This Manual contains all the information you need to set up and use your new notebook. It describes all the features of the notebook in an easy-to-read yet thorough manner.
Introduction — Inventory 3 Inventory This computer system is designed for years of productive and pleasurable computing. Use this section to keep details of your purchase. This information will be required should you need to make repairs to your notebook during the warranty period. Update this section when you add new options. DATE OF PURCHASE: PLACE OF PURCHASE: DEALER'S NAME: DEALER'S ADDRESS: TELEPHONE: E-MAIL ADDRESS/WWW: CONTACT PERSON: MODEL NUMBER: SERIAL NUMBER: BIOS VERSION: The serial number is on the label (with a bar code) on the bottom side of the computer. The BIOS revision number will appear briefly on the screen after turning on the computer, before the graphic BIOS screen appears. Press the Pause key to keep the number on the screen so you can record it.
Chapter 1 — Introduction 4 Safety and Maintenance You can use your computer under a wide range of environmental conditions. However, to ensure long use and continued high performance, consider the following factors when setting up your computer: • Follow all warnings and instructions noted in this documentation and in the Windows Help program. • The first time you use your computer, we recommend that you carefully read the Making Connections section of this manual and initialize the battery to ensure optimum battery performance. • Unplug the computer from the power outlet before cleaning. Use a damp cloth for cleaning. Do not use aerosols, solvents, or strong detergents. • Do not use the computer near open water or other liquids. Never spill liquid onto the computer. • Do not place the computer in an unstable location where it might slip or be knocked over. Serious damage could result from a fall. • Slots and openings in the system cabinet are for ventilation purposes. Do not block or cover these openings or the system could overheat. Do not use or store the computer near a source of heat or dust. • On the base or rear panel of this notebook, there is a label with information on the power requirements of this system. These requirements must be followed. If you are unsure of your local power supply, consult your dealer or local Power Company. • Do not step on or place anything on the power cord. • If you use the computer with an extension cord, ensure that the total ampere ratings of all the devices sharing the extension do not exceed the rating of the extension cord or the rating of the wall outlet. • Never push foreign objects into the computer through any of the slots or openings. Dangerous voltages are present, which could cause electric shock or fire, or damage sensitive components. • For best results, use a power strip with a built-in surge protector. Do not use inferior extension cords as this may result in damage to your computer.
Introduction — Checklists 5 • Set the computer on a flat, stable surface. To prevent damage to the computer’s hard disk drive, avoid using the computer where it will be exposed to strong vibration. Checklists After opening the package, carefully inspect the contents. If any of the items is missing or appear damaged, contact your dealer. The shipping carton should contain the following: STANDARD • An internal battery • A CD-ROM/DVD drive • An AC adapter with power cord • User's Manual • System software CD-ROMs OPTIONS The following items are normally optional, but some vendors may include them in the standard package. Some items may not be available in some countries, or some vendors may choose not to carry all the items. • 128 MB SODIMM memory cards • Carrying bag • An FDD disk Caution: When purchasing any of the accessories listed above, purchase only those accessories that are approved for use with your computer. The above accessories are proprietary items. Your system vendor can obtain these approved accessories. If you use items that are not approved for use with this computer, you may cause your computer to malfunction, or to emit or receive electro-magnetic radiation in excess of local regulations. For non-proprietary accessories such as PC cards or printers, ensure that the accessory functions properly in your computer before making the purchase. Your system vendor may be able to recommend reliable brands and models.
Chapter 1 — Introduction 6 Features High Capacity Hard Disk Drive The computer has a high capacity hard disk drive, to store your favorite programs and large multimedia files. Built-in Modem/LAN Capability/WLAN Module A built-in 56k modem and 10/100 Mbps Ethernet port allows you to access the Internet or a local area network (LAN). Large LCD Your computer has an easy-to-view XGA LCD panel. Built-in Stereo Speakers The stereo speakers enable you to run a variety of multimedia applications. Convenient Audio Control The conveniently located audio control knob enable you to easily adjust the volume to the stereo speakers. Function Keys Function keys give you easy control of power management and your monitor. Scrolling Area Comfortably scroll through documents with the ergonomically designed scrolling area within the touch pad. Where to Look For Information About Your Computer This User’s Manual describes the key elements of your computer. New users can find a simple step-by-step orientation in the Quick Start section of this chapter. About Windows The Windows Manual provides an overview of the Windows operating System. Windows Online Help, found on the Start menu, offers extensive Windows assistance. Welcome to Windows offers an online orientation for new Windows users. Find it in: Start / Programs / Accessories / System Tools.
Introduction — Quick Start 7 Quick Start Turning on the Computer for the First Time 1. Connect the AC adapter power cord to the AC adapter. 2. Connect the AC adapter to the DC power port on the right side of your computer. 3. Connect the AC adapter power cord to an AC outlet. 4. Slide the cover latch in the direction of the arrows to open the LCD. 5. Open the LCD panel to a comfortable viewing angle. 6. Press the power button to turn on the power. Note: The battery is not fully charged. Allow your battery to fully charge before using it (i.e., before disconnecting AC power). Calibrating the battery before use is also highly recommended. Refer to Chapter 5, Power Management, for further information. Use the touchpad to move the cursor on the screen. Move your finger across the pad to control the cursor, and press the right and left buttons beneath with your thumb. These buttons have the same functions as the right and left buttons of a standard mouse. You can also click or double-click by tapping on the touchpad.
Chapter 1 — Introduction 8 Loading Windows The following section is for installing the Windows operating system only. If you are installing a different operating system, please check with your vendor for installation details. Product key number Your computer will begin loading Windows once you turn on the power. Wait a few seconds for Windows setup to load. The Windows setup will prompt you for the product key number, shown to the right: Note: The product key is on a sticker attached to the bottom of the Notebook. 1. Type your name, and, if applicable, the name of your company. 2. Read the End User's License Agreement. Click Next to accept it. 3. Enter the product key number. You can find this on the Certificate of Authenticity on a sticker attached to the computer. Click Finish. 4. The Start Wizard will prompt you to set the date, and your local time. After the Start Wizard updates your system settings, the Welcome to Windows screen will appear. You may disable this feature by clearing the check box labeled show this screen each time Windows starts. Some software comes preloaded with Windows. New users can familiarize themselves with this software by selecting Programs from the start menu, then clicking on programs to run them.
Introduction — Adjusting the Volume 9 Adjusting the Volume You can adjust the volume with the volume control knob located below the touchpad. Volume control button Alternatively, you can adjust the volume with the Windows volume control applet located on the taskbar. Adjusting the Brightness Use the following hot key combinations to adjust the LCD panel brightness: • Fn + F6 decreases the brightness • Fn + F7 increases the brightness
Chapter 1 — Introduction 10 Turning off Your Computer Turning off the computer properly is important to maintaining your computer. 1. On the Start menu, click Shut Down. 2. Click the radio button next to Shut Down in the Shut Down Windows screen, and then click OK. If you are going to be away from the computer for a short period, there are ways of conserving power without shutting down the system. See Chapter 5, Power Saving Modes, for details. Warning: Shutting off the computer improperly may result in data loss. Making a Startup Disk If you have trouble starting Windows, the startup disk can be used to start your computer and fix many problems. Refer to the Windows user manual for instructions.
Introduction — Tips for New Owners 11 Tips for New Owners Take responsibility for backup Back up files often. Users who need to manage large amounts of data may wish to use backup devices such as a tape backup unit or a ZIP drive. If you use your notebook as a networked workstation with system backup, talk to the system administrator about backup procedures for your notebook. Don't leave passwords anywhere on your notebook or carrying case Be careful when placing your notebook on an airport security conveyor belt In most airports, security conveyor belts are safe for computers. If you are not sure, ask the security staff. You should keep a close eye on your computer. When you are in a hurry, make sure that you walk away with the correct notebook computer! Tape your business card to the notebook and accessories In the workplace, notebooks and accessories may often look exactly alike, leading to equipment mix-ups. Prevent such mix-ups by placing your name on your equipment. Develop ergonomic work habits The science of ergonomics studies the relationship between health and a suitable work environment. For more information on ergonomics, contact your nearest computer bookstore, or local library. The Internet also has information on this and other related subjects. Never take the notebook anywhere without the carrying case A broken screen or case can be costly to repair. Prevent accidents by carrying the computer in a suitable carrying case.
Chapter 1 — Introduction 12 Consider using a lock For added security, consider purchasing a Kensington lock to put into the Kensington lock hole on the left side of your computer (see Chapter 2, Left View). Use the Kensington lock to secure the computer to a desk or table. Note: Using a computer for extended periods of time with a poor workstation setup and incorrect work habits can cause health problems.
CChhaapptteerr 22 GGeettttiinngg SSttaarrtteedd
Chapter 2 — Getting Started 14 Hardware and Software This chapter introduces the different components and controls of your notebook computer, including the hardware components, the software, and the audio and video systems. Getting Started Before you begin using your computer, read this chapter to familiarize yourself with the main components installed in the system. Slide the screen latch on the front edge of the cabinet towards the right to release the cover latch and open up the computer.
Getting Started — Front View 15 Front View 1. LCD release latch 2. LCD panel 3. Battery 4. Keyboard 5. Status indicators 6. Speakers 7. Touchpad 8. Touchpad buttons 9. Volume control knob 10. Microphone-in jack 11. Audio-out jack for external speakers or headphones 12. Power indicators 13. WLAN switch 14. Power button 6 6 21345 7 8910111213 14
Chapter 2 — Getting Started 16 Left View 123456 1. Kensington lock hole 2. VGA port external video display 3. Phone jack for internal modem 4. LAN RJ-45 jack 5. PCMCIA card slot 6. PCMCIA card eject button
Getting Started — Right View 17 Right View 1. USB ports 2. CD-ROM/CD-RW/DVD-ROM drive 3. CD-ROM/CD-RW/DVD-ROM eject button 4. DC-adapter port 1234
Chapter 2 — Getting Started 18 Bottom View 1. Ventilation slots 2. SO-DIMM SDRAM compartment 3. Battery release button 4. Battery 1234
Getting Started — LED Status Indicators 19 LED Status Indicators The status indicators in the upper left corner of the keyboard light up when a particular function of the computer is active. Each indicator is marked with a symbol. CD ROM Drive The computer is reading information from the CD-ROM, CD-RW or the DVD ROM drive. HDD The computer is reading from, or writing to the built-in hard disk. Number-Lock The keyboard is in Num-Lock mode. Caps-Lock The keyboard is in Caps-Lock mode. Scroll-Lock The keyboard is in Scroll-Lock mode.
Chapter 2 — Getting Started 20 Power Indicators The power indicators show which power source the system is using. They also show battery status and low battery power alerts. The power indicators remain active and viewable even when the LCD panel is closed. Icon Light Description Blue Power is on and the AC adapter is in use T Blue Wireless LAN Green Power is on and the battery is in use Flashing Green Power is in suspend mode Function Keys Hold the Fn key while pressing the numbered function key. Function key Description Fn + F3 Toggles display on/off Fn + F4 Suspend to RAM/HDD Fn + F5 Toggles between LCD/CRT displays Fn + F6 Decreases LCD brightness Fn + F7 Increases LCD brightness
Getting Started — Numeric Keypad 21 Numeric Keypad The embedded numeric keypad consists of ten keys that make number intensive input more convenient. Press <NumLock> to enable or disable the numeric keypad. Touchpad The touchpad is a pressure sensitive pointing device that provides all the features of a two-button mouse. Its primary function is to move the cursor around the screen. The instructions listed below describe how to use the touchpad. 1. First, place your fingers on the keyboard in the normal typing position. The touchpad is easily accessible by moving either your left or right thumb off the space bar and on to the touchpad. 2. Gently move your thumb across the pressure-sensitive touchpad in the direction you want the cursor to move. The pad detects the change in pressure and moves the cursor in the corresponding direction. 3. The touchpad offers another method of making selections in a software program. It is called double-tapping. This function corresponds to double-clicking with a mouse. Once the cursor has been moved to the object you want to select, lightly double-tap the pressure sensitive touchpad. This double-tapping on the touchpad will select the desired item and prompt the software to perform the related operation. 4. The buttons located directly below the touchpad are the same in function as those on a two-buttoned mouse. Clicking these buttons makes selections, drags objects, or performs a variety of other functions depending on the software. To select an object, first move Touchpad buttons Touchpad buttons Scrolling area
Chapter 2 — Getting Started 22 the pointer over the object you want to select, and then press the left button one time. The functions of these buttons are software specific. 5. Double-clicking is a common technique for selecting objects or launching programs from icons. Once you have moved the pointer over the object you wish to select, rapidly press the left button two times. This action is commonly referred to as “double-clicking” an object. Dragging There are two ways to drag: • Move the pointer to the desired location then press down the left button. While still holding down the left button, move the pointer to the desired location. Release the button. • Move the pointer to the desired location. Tap the touchpad twice quickly as if you were double-clicking, however do not remove your finger after the second tap. Move the cursor to the desired location. Lift your finger to finish dragging. Adjust the touchpad settings by selecting Settings/Control Panel/Mouse/Buttons. These settings allow you to change the orientation of the touchpad from right-handed to left-handed, and fine tune the pointer movement and timing of clicks. Touchpad Precautions The Touchpad is a pressure-sensitive device. If not properly cared for, it can be easily damaged. Please take note of the following precautions. • Make sure the touchpad does not come into contact with dirt, liquids or grease. • Do not touch the touchpad if your fingers are dirty. • Do not rest heavy objects on the touchpad or the touchpad buttons. Scrolling Area If you are scrolling through a document, you may find that using the scrolling area is more restful to your hand than holding down a mouse button. The scrolling area is located both on the right and lower touchpad panel. Gently move your finger across the arrow signal by the direction to scroll up or down, left or right in a document or Web page.
Getting Started — Connecting the Floppy Disk Drive 23 Connecting the Floppy Disk Drive Your notebook computer comes with a USB port 1.44 MB floppy disk drive (option). The FDD is “hot pluggable,” so you do not have to power down the notebook to connect it. Disk Drives Your computer comes with several components for reading and writing (recording) information. Floppy Disk Drive The floppy disk drive provides a convenient way of storing and transferring small files. The disk drive uses standard 3.5-inch, 1.44 MB disks. To use the disk drive, insert a disk (label side up) into the drive slot and slide it all the way in. To eject the disk from the drive, press the eject button. When the computer is reading from or writing to a disk, the disk indicator light will flash. Do not try to eject the disk when this light is active or you may lose data. Hard Disk Drive The hard disk provides high-capacity storage and fast access. Windows and most programs are stored here. Your notebook identifies the hard disk drive as drive C. Floppy disk drive USB connector
Chapter 2 — Getting Started 24 The CD-ROM, CD-RW, or DVD Drive Your computer comes with a pre-installed CD-ROM, CD-RW, or DVD drive. The CD-ROM drive is a read-only drive. It cannot be used to write data to a recordable CD. The CD-ROM drive can read data from CDs, including audio or video CDs. The CD-RW can perform these same functions, as well as record information to writeable CD's. The DVD drive can read both DVDs and CDs. Your notebook identifies the drive with the letter following the hard drive letter. If your hard drive is D, then the CD-ROM drive will be E. Inserting a Disk 1. Press the button on the front of the drive to open the disk tray and pull the tray open. 2. Place the disk on the tray, label side up. 3. Place the disk on the central spindle and press gently until the disk clicks into place. 4. Slide back the tray until it clicks shut. Removing a Disk 1. Make sure the computer is not accessing the CD-ROM drive. 2. Press the eject button and pull the tray all the way out. 3. Pick up the CD by the edges and remove the CD-ROM from the tray. Push the tray into the computer until it closes fully. Warning: When the computer is reading from a CD-ROM/CD-RW/DVD, the indicator light for the CD-ROM will flash on. Do not attempt to remove a disk while this light is active.
Getting Started — Connecting the Printer 25 Precautions for Handling CD-ROM Discs Keep these precautions in mind when handling CD-ROM discs. • Always hold the disc by the edges; avoid touching the surface of the disc. • Use a clean, dry, cloth to remove dust, smudges, or fingerprints. Wipe from the center outward. • Do not write on the surface of the disc. • Extremes in temperature may damage discs. Store discs in a cool dry place. • Do not use benzene, thinners, or cleaners with detergent. Only use CD-ROM cleaning kits. • Do not bend or drop the discs. • Do not place objects on top of discs. Warning: Do not insert any foreign objects into the disc tray. Do not force the tray to open or close manually. When not in use, keep the tray closed to prevent dust or dirt from entering the drive unit. If you experience difficulty when removing a CD disc, stretch a paper clip (or use a pin or a thin metal rod) and insert it into the emergency eject hole located on the front panel: The CD disk tray should eject immediately. This procedure can also be used to remove a CD from the drive when the notebook is powered off. Connecting the Printer To connect a printer to your notebook via the USB port, use the supplied USB to printer adapter cable. Note: Before use, you must install the driver for the adapter cable.
Chapter 2 — Getting Started 26 The PC Card Slot The PC card slot can be used as an interface between your computer and a variety of communications devices, such as network adapters, SCSI adapters, fax/modems, or provide additional data storage capacity. Your computer's PC card slot supports PCMCIA Type II, 32-bit CardBus, and Zoomed Video cards. Installing a Card 1. The top side of a PC card is usually identified with a label. Insert the card into the slot with the label side up and the edge with pinhole contacts going in first. 2. Insert the card into the slot. You will feel some resistance as the card slides into the back of the slot. 3. PC cards require drivers, or a program that allows the operating system to use a specific device. Many drivers are included with Windows, but if not, you will be prompted to install the driver included with your card. 4. The computer will beep twice to indicate successful installation. A single beep means that there was a problem recognizing the card. Note: Please read the instructions included with individual PC cards. Some cards may be inserted with power on, while others require that the computer be turned off. Removing a Card 1. If a card is in use, you must shut down the card before removing it. Or you can click the PCMCIA icon on the right side of the taskbar, then click Stop. 2. Press the eject button on the card slot to release the button. 3. Press again to release the card. Slide the card into the slot. Push the button to eject the card.
Getting Started — Memory 27 Memory Adding memory allows the computer to operate faster, handle more tasks simultaneously, and work more smoothly with large files. Users who increase memory demands - by adding additional programs, for example - may notice a slowdown in operating speed, and wish to increase memory. The notebook includes a memory card slot for adding additional memory. Note: Use only 1-inch DDR SODIMM (200 pin) modules. Replacing a Memory Card Warning: Memory modules can be easily damaged by static electricity. Leave the module inside its static-proof bag until it is ready for installation. Removing a Memory Card 1. Turn off the computer and disconnect the AC adapter. Turn the computer upside down and lay it on a flat surface. 2. Carefully remove the two RAM compartment cover screws and remove the RAM compartment cover. 3. Gently pull tabbed latched in the direction of the arrows (1). The card will pop up slightly. 4. Pull upwards on the card and then slide the card out (2).
Chapter 2 — Getting Started 28 Inserting a Memory Card 1. Hold the memory card by its edges with the edge-connector side towards the slot. 2. Hold the card at a shallow angle (about 25 degrees) and insert the edge connector into the connector slot (3). The “gold teeth” of the edge connector should no longer be visible when the card is fully inserted. 3. Press the card downwards so that it is flat inside the compartment (4). You may hear an audible click as the latches of the connector lock the card in place. 4. Replace the RAM compartment cover and secure it with the two screws. Your notebook computer will automatically detect the change in RAM capacity when it restarts.
Getting Started — The Graphics System 29 The Graphics System Your computer has a high-performance graphics system, which can easily handle the demands of today's multimedia computing. Screen Controls Brightness Function keys can increase or decrease the brightness of the monitor. • <Fn> + <F6> decreases the LCD panel brightness • <Fn> + <F7> increases the LCD panel brightness Resolution 1. Click My Computer/Control Panel/Display/Settings. Click the Settings tab. The dialog box indicates the monitor resolution. 2. Use the slide bar to adjust the resolution. Normally, you should use the resolution the LCD or monitor was designed for. Note: Using a lower resolution than the screen was designed for will reduce the area of the display. Using the computer in DOS mode may produce the same effect, because it uses a 640 by 480 resolution by default. You can stretch these low resolution displays to full screen size by selecting either the Expanded Display or Display Expansion Mode features in the BIOS utility. However, the stretching may cause distortion, especially to fonts. High Resolution with an external monitor Higher resolution modes may be used, as long as the monitor supports them. Connecting to an External Monitor The notebook has a VGA monitor port to connect your computer to an external monitor. Using the VGA monitor port 1. Locate the 15-pin VGA monitor port on the left side of your notebook and connect the video signal cable from the external monitor (or the VGA adapter) to the monitor port. 2. Connect the power cable from the external monitor to a power outlet and turn on the monitor.
Chapter 2 — Getting Started 30 3. On your notebook, click the right touchpad button on the Windows desktop to open the desktop menu. Click Properties to open the Display Properties window. 4. In the Display Properties window, click Advanced in the Settings tab. Click the Display Modes tab. 5. Under Driver mode, you can select the appropriate options to change the display to an external monitor. 6. Adjustments to screen resolution and color depth can also be made in this dialog box. Dual Displays With Windows system, you may use an external monitor simultaneously with your notebook’s LCD. You may also use the external monitor only and disable the LCD or only use the LCD. To do this you may first need to enable the multiple display settings in Windows 98. 1. Open the Control Panel. 2. Double-click Display. The Display Properties window opens. 3. Click the Settings tab. 4. Click the Advanced button. 5. Click the Display Modes tab. The screen shown at the right appears.
Getting Started — The Graphics System 31 Under Display Modes, there is a drop-down list with tow options: Single and Mirror. These options are described below. Single In Display Combination, there are two options available: VGA1 or LCD2. You can choose which device to apply as the Primary display. VGA1 is the default value for Primary if an external CRT is available. If an external CRT is not connected to the notebook, only LCD2 is available. In Single mode, the video display hot key combination is available—you can cycle the video output by pressing the Fn + F5 keys. Mirror In Display Combination, there is no Primary display option available. Only LCD2 is available as Secondary display even when an external CRT is connected. In Mirror mode, the video display hot key combination is available—you can cycle the video output by pressing the Fn + F5 keys. If the external CRT is connected, the display on the LCD and the CRT is the same. Tip: To ensure trouble-free video output, the first time you use an external monitor, change the output in the Display Properties dialog box. After successfully switching modes, you may use the video function keys. Note: Light or dark dots may appear on the LCD due to technical limitations of LCD manufacturing. This will not effect normal operation of the LCD.
Chapter 2 — Getting Started 32 Communication Components This system provides powerful communication functions, including built-in Fax/Modem, WLAN module and PCMCIA card slot. Fax/Modem/WLAN A phone jack on the left side of the computer allows you to connect to the Internet to send and receive data. When used with fax software, it can be used as a fax. When using this function, first plug the phone cord into the jack. And the Wireless LAN function allows you to connect to the Internet if you stay in the place with an Access Point. Anti-electromagnetic wave clip To eliminate electromagnetic waves, it is strongly recommended that you thread the phone line or LAN cable through the clip provided as shown below when connecting to a phone line or LAN cable. Attention: When using the data communications function, please do not plug the phone cord into the ISDN or PBX jack to avoid an electrical surge that will cause the MDC module to burn.
CChhaapptteerr 33 MMaakkiinngg CCoonnnneeccttiioonnss
Chapter 3 — Making Connections 34 Making Connections Your computer is equipped with a full array of ports and connectors, including standard input/output (I/O) ports for quickly and easily adding peripheral devices such as printers, keyboards, and mice. Refer to documentation included with individual devices for details on connecting these devices to your computer. Along with the standard ports found on most computers, your computer also includes three USB ports, modem and LAN ports, offering advanced communications technology. Left Side Connectors 1. Kensington Lock Your computer includes a Kensington lock hole to be used with a standard Kensington lock. You can connect the notebook to a large object with the Kensington lock to prevent theft of your notebook. See the documentation that comes with your Kensington lock for more information. 2. VGA Out (External Video) Port The 15-pin VGA port can be used to connect your computer to an external monitor. (See the Graphics System in chapter 2 for more information). 1 2 3 4
Making Connections —Right Side Connectors 35 3. Fax/modem RJ-11 Jack The fax/modem can transmit data using the 56 Kbps V.90 protocol, and send and receive faxes at 14.4 Kbps. In some countries, local regulations may not permit the use of the fax/modem designed for this system. In this case, you may use a PCMCIA modem. 4. LAN RJ-45 Jack With the built-in Ethernet LAN combo, you can make LAN connections without installing PC cards. Connection speed is 10/100 Mbps. When using the LAN function, wrap your LAN cable around the EMI ferrite suppression box to inhibit electromagnetic interference. Right Side Connectors 12 1. USB (Universal Serial Bus) Ports The Universal Serial Bus (USB) is the latest standard for attaching monitors, input devices, scanners, and other devices to a PC. USB devices can be chained together on a single cable. 2. DC-in Jack Connect the DC power cable from the AC adapter to this jack. Warning: Plug your modem into an analog telephone jack only. Most homes use analog lines. Do not use digital lines, such as the PBX and ISDN systems found in many offices. Digital lines may damage your modem.
Chapter 3 — Making Connections 36 Front Side Connectors 1. Audio-out Jack Connect a stereo headset or external speakers to this jack to listen to multimedia. 2. Microphone-in Jack Connect a microphone this jack to record audio. 1 2
CChhaapptteerr 44 SSyysstteemm SSooffttwwaarree
Chapter 4 — System Software 38 System Software Software List Operating System Your hard drive already contains all the software you need to operate the computer. Audio and Video Drivers These utility programs and drivers are included for the PC Card drive, the sound system, and the graphics sub-system. DVD Player Application The DVD player application will let you watch DVD movies on your notebook (for DVD-ROM module only).
System Software —System Recovery 39 System Recovery Before you start Your system includes two Recovery CD-ROMs. Follow the steps in the appropriate section below to reinstall the operating system, the system software, or add a new hard disk. • The factory has pre-partitioned your system's hard disk, so you may directly install the system software; however, if you change a new hard disk, you must first partition it. • If you reinstall your operating system, all of the data originally on the hard disk will be overwritten. Before reinstalling the operating system, carefully backup any important data. • Your system is shipped with two different Recovery CD-ROMs. Before reinstalling, note the CD-ROM labels. Caution: When you re-install operating system by Recovery CD for Windows, we STRONGLY recommend connecting the AC adapter（ do NOT use battery alone ）to avoid warning message.
Chapter 4 — System Software 40 Recovering Windows and Original Software If your Windows operating system is lost or damaged, use the Recovery CD (Windows). Enter BIOS setup. Set first boot device to “CD-ROM.” (See Chapter 6: BIOS Settings.) Put the Windows Recovery CD into the CD-ROM drive and reboot the computer. Hard disk partitioned? YES. Follow steps under Recovering Windows. NO Follow the instructions in the sections below: • Partitioning the hard drive • Recovering Windows • Creating a Suspend-to-Disk Partition (Windows 98SE only) • Recovering original software
System Software —System Recovery 41 Partitioning the Hard Drive Hard drive is not partitioned. When the Microsoft Windows startup menu appears, select (2) Go to MS-DOS PROMPT. Press Enter to repartition your hard disk. At the A:\ prompt, type fdisk and press Enter. Note: If your computer is set to boot from the CD-ROM drive, “A” refers to your CD-ROM. If you see the message: “Do you wish to enable large disk support (Y/N),” Select “Y.” On the first screen select “Create DOS partition or logical DOS drive.” On the next screen select “Create Primary DOS partition.” This will create the largest possible partition as the C drive. Then press “ESC” back to the first screen, and select “2. Set active partition”. After finishing you will see the question “Enter the number of the partition you want to make active…” Please continue with keyin “1”, then press ENTER. After completing disk partitioning, press ESC to exit fdisk. Press <Alt>, <Ctrl>, and <Del> to reboot your computer. Follow steps under Recovering Windows.
Chapter 4 — System Software 42 Windows XP/ 2000 Pro. Reinstallation Enter BIOS setup. Set first boot device to “CD-ROM.” (See Chapter 6: BIOS Settings.) Put the Recovery CD for Windows XP/ 2000 Pro. Disc#1 into the CD-ROM drive and reboot the computer. While starting Windows, reenter the Windows information as prompted. When the Microsoft Windows XP/ 2000 Pro. Menu appears, choose option 1: Recovery CD for Windows XP/ 2000 Pro. When prompted, insert the Disc#2. It will take approximately five minutes to complete the installation. Remove the CD-ROM from the drive when the installation is complete. Press <Alt>, <Ctrl>, and <Del> to reboot the computer. Enter the BIOS Setup Utility and select Boot priority. Reset the boot priority to either A: or C:
CChhaapptteerr 55 PPoowweerr MMaannaaggeemmeenntt
Chapter 5 — Power Management 44 Power Management Battery Calibration The first time you use a battery, you should calibrate it. The calibration process empties and charges the battery one time. This allows the Windows battery gauge to accurately monitor battery status. To calibrate a battery, follow these steps: 1. Plug in the AC adapter. 2. Restart the computer and when the startup screen appears, press Del key to enter the BIOS Setup Utility. 3. In the BIOS Setup Utility, select Power Management Setup , choose Battery Auto Calibration, then press <Fn><PgDn>. Please make sure that AC adapter & Battery are present? Would you to do battery auto-learning? Yes. No. (System Reboot) 4. Press <Y> at the above Battery Auto Calibration dialog to begin the battery calibration. Please press [Space Bar] to select option, and [Enter] to continue. Battery Calibration will take from 8 to 10 hours, depending on how much power the battery may already contain. Note: For optimum performance, we recommend calibrating the battery again every three months. Each time you charge and discharge a battery, it loses a tiny part of its storage capacity, so that, over time, it will store less than its potential charge. Similarly, if you do not use the battery for a few days, it will slowly self-discharge, and when it is recharged, it will hold less than 100% of the potential charge.
Power Management —Monitoring Battery Power 45 Monitoring Battery Power There are two ways to monitor how much power the battery has left. 1. Click start/Settings/Control Panel/Power Options; then click Power Meter. 2. Moving the cursor to the battery icon on the taskbar is the simplest way to check on battery power status. If you do not see the battery icon, enable it in Start/Settings/Control Panel/Power Options. Choose the Advanced tab and click “Always show icon on the taskbar.” Low Battery Alarms How your computer responds to a low battery condition is set under Start/Settings/Control Panel/Power Options/Alarms. Two different power alarms can be enabled or disabled: the Low Battery Alarm, and the Critical Battery Alarm. Use the slidebar to set the power level at which the alarms are activated. Click on the Alarm Action button to choose whether the alarm sounds, displays a message, or both. Warning: When battery power is low, the battery indicator will flash red, and the alarm will beep or display a warning on your screen. Take immediate action, such as saving files or connecting to the AC adapter, or data may be lost. When the computer alerts you that the battery is low, immediately do one of the following: • Connect the AC power adapter • Save your work, and suspend to disk <Fn> + <F4>
Chapter 5 — Power Management 46 • Save your work, then select Shut Down from the Start menu • Turn off or suspend the computer and replace the discharged battery with a charged battery (See Changing the Battery below). Do not restart the computer until you have connected to an AC adapter, or replaced the discharged battery with a charged battery. Battery Charging When you use the AC adapter to connect your Notebook to a power outlet, the internal battery will automatically begin to recharge. While the battery is charging, the Battery Charge icon on the Indicator panel will be active. When the battery is fully charged, the Battery Charge icon will turn off. If your computer is turned off, a fully discharged battery will take about 2.5 hours to recharge. If your computer is turned on and is not in suspend mode, it twill take about 3 hours to recharge the battery. Refer to the following table: Charging Discharging System On 3 hours 3.5 hours System Off (suspend to RAM) 2.5 hours — Note: A fully charged Li-Ion battery can run the Notebook for approximately 3.5 hours. Power Saving Modes Adjust the default power management settings in the Power Options/ Advanced dialog box in the Control panel. The Power Options Properties dialog box allows you to set different actions to take when the computer is left idle for a certain amount of time. Suspend Mode There are several possible settings for suspend mode, which can be selected in the Power Management dialog box: You may have the notebook standby, hibernate, or you can power off the computer altogether.
Power Management —Power Saving Modes 47 Standby All devices are powered up and in suspend mode except for the CPU clock. Hibernate Suspend to Disk is similar to turning off the computer, except that the current state of the computer is copied to the hard disk as a special file. When the computer returns from suspend mode, the desktop appears with the same files and programs open as when the computer was suspended. Suspend to Disk is very useful when you don't want to take the time to shut down all open programs one by one to shut off the computer, only to have to open the same programs and files the next time you use the computer. This mode is also called hibernation mode. Suspend-to-disk Partition/Suspend-to-disk File In order to Suspend to Disk, you must have a special suspend-to-disk partition/file on your hard disk drive. This partition is pre-installed on your computer. The pre-installed partition is large enough to store all system memory. Power Off System is shutdown. Initiating Suspend Mode There are four ways to initiate suspend mode. The settings can be adjusted in the Power Management dialog box: • The computer will automatically enter suspend mode when not used for a set period of time. • Selecting the Stand by button in the Shut Down Windows dialog box. • Closing the screen cover (assuming no external monitor has been connected). • Pressing the power button (if enabled in power settings). • Pressing the suspend function key <Fn> + <F4>. Using the BIOS Utility for Power Management With Windows running in ACPI mode, power can be controlled through the Power Management dialog box only. With operating systems that use ACPI power management, BIOS power settings have no effect.
Chapter 5 — Power Management 48 Power Button Settings The function of the power button can be set to Shutdown or Standby in the Power Management Properties dialog box in the Windows Control Panel. However, holding the power button down for more than four seconds will force a power off while operating under any situation, resulting in the loss of any unsaved information. Power Saving Tips • Avoid operating the fax/modem, or audio and video applications when using battery power. Operating a fax modem, video, or audio equipment increases the computer's power requirements. • Decreasing monitor brightness can also save power. Decrease brightness by pushing <Fn> + <F6>. Increase it by pushing <Fn> + <F7>. When to Replace the Battery Over time, the battery's capacity gradually decreases. We recommend that you replace your battery when you notice that it begins to store significantly less charge. Changing the Battery Change the main battery pack as follows: 1. Turn off the computer. 2. Close the screen cover and turn the computer over. 3. Slide the side battery latch (1) away from the battery. Continue to hold it until the battery is removed. 4. Push in the latch on the battery (2) while lifting the battery out of the compartment. Remove the battery. 5. Make sure the replacement battery is properly orientated. Slide back the side battery latch (1) then insert the battery into the battery compartment. Check that the latch locks back into position.
Power Management —Heat Considerations 49 Heat Considerations The computer's processor has been specially designed to consume little power, and generates very little heat. However, working in a hot environment, or working for long periods may raise the temperature. Your computer takes the following steps to lower temperature: 1. The cooling fan will automatically turn on. You may feel air coming from a vent at the left side when this happens. 2. If the temperature continues to rise, processor activity will be reduced. You may notice a slight loss of performance when this happens.
Chapter 5 — Power Management 50
CChhaapptteerr 66 UUssiinngg tthhee BBIIOOSS SSeettuupp UUttiilliittyy
Chapter 6 — Using the BIOS Setup Utility 52 Using the BIOS Setup Utility Your notebook has a BIOS setup utility which allows you to configure important system settings, including settings for various optional functions of the computer. This chapter explains how to use the BIOS setup utility. BIOS Setup Menu The BIOS setup Utility allows you to configure your computer’s basic settings. When you turn your computer on, the system reads this information to initialize the hardware so that it can operate correctly. Use the BIOS setup utility to change your computer’s start-up configuration. For example, you can change the security and power management routines of your system. Starting the BIOS Setup Utility You can only enter the BIOS setup utility as the computer is booting, that is between the time you turn on the computer and before the Windows interface appears. If your computer is already on, shut down your computer completely (power off) and restart it and then press the Del key to enter the setup utility.
Using the BIOS Setup Utility —Navigating and Entering Information in BIOS 53 Navigating and Entering Information in BIOS Use the following keys to move between fields and to enter information: Key Function Del Press Del to start the BIOS utility after turning on the computer. ESC Press Esc to exit any section. If you wish to exit the BIOS utility without saving changes, go to the main menu, then press Esc. Up, down keys (ÇÈ)Push the up and down arrow keys to move among selections, then press Enter to make a selection. PgUp or PgDn Use the PgUp, PgDn keys to modify a field. Use PgUp to increase a value, such as a date or number, and PgDn to decrease it. For other types of choices, such as “enabled,” or “disabled,” use either key to move between choices. Enter Press enter to make a selection F2 or F3 Pressing either key changes the color of the graphic display. F10 Press F10 to save changes, then exit.
Chapter 6 — Using the BIOS Setup Utility 54 The Main Menu The Setup Utility menu bar has nine main screens: Standard CMOS Setup, Advanced CMOS Setup, Power Management Setup, Auto-Detect Hard Disks, Change User Password, Change Supervisor Password, Auto Configuration with Optimal Settings. Save Settings and Exit, and Exit Without Saving are used to exit the Setup Utility. AMIBIOS HIFLEX SETUP UTILITY – VERSION 1.38 (C)2001 American Megatrends, Inc. All Rights Reserved Standard CMOS Setup Advanced CMOS Setup Power Management Setup Auto-Detect Hard Disks Change User Password Change Supervisor Password Auto Configuration with Optimal Settings Save Settings and Exit Exit Without Saving Standard CMOS setup for changing time, date, hard disk type, etc. ESC:Exit ↑ ↓:Sel F2/F3:Color F10:Save & Exit Figure 6-1
Using the BIOS Setup Utility —Standard CMOS Setup 55 Standard CMOS Setup The Standard CMOS Setup page of the Setup Utility has a list of fields that describe the basic configuration of your computer. CMOS is simply a type of random access memory, or RAM, used to store the basic configuration of the computer. AMIBIOS SETUP – STANDARD CMOS SETUP (C)2001 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy): Wed Jan 12,2001 Base Memory: 640 KB Time (hh/mm/ss) : 16:55:24 Extd Memory: 55 MB LBA Blk PIO 32Bit Type Size Cyln Head WPcom Sec Mode Mode Mode Mode Pri Master: Auto On Sec Master: Auto On Boot Sector Virus Protection Disabled Month: Jan – Dec ESC:Exit ↑ ↓:Sel Day: 01 – 31 PgUp/PgDn:Modify Year: 1980 – 2099 F1:Help F2/F3:Color Figure 6-2
Chapter 6 — Using the BIOS Setup Utility 56 Standard Feature Description Field Setting Function System Time & Date Use these fields to set the time and date. The time is displayed in 24-hour format. The date can be set from January 1, 1980 to December 31, 2099. The values set in these two fields take effect immediately. Type Shows type of system installed, including the following options: (Pri. Master) Auto, CD-Rom /DVD, No Installed, User; (Sec. Master) Auto, CD-Rom /DVD, Not Installed, User. Auto CD-ROM/DVD Not Installed Pri. Master User The Default setting is Auto. Auto lets the system automatically read setup information from the device. When set to Auto, the BIOS will automatically detect hard disk capacity. Auto CD-ROM/DVD Not Installed Sec. Master User The Default setting is Auto. Auto lets the system automatically read setup information from the device. Size Hard disk capacity. Cylinders Displays the number of cylinders on the hard disk drive. LBA Mode Only some hard disk drives support Logical Block Addressing. Default depends on the Hard Disk Drive type. Blk Mode Only some hard drives support block (multi-sector) transfer of data PIO Mode The default value Auto lets the system automatically read setup information it needs for setup from hard disk drive. Five explicit values, 0 to 4, are also possible. 32Bit Mode Only some hard disk controllers support 32 bit data transfer Base Memory; Extended Memory These two items are detected automatically at start-up time and cannot be changed
Using the BIOS Setup Utility —Advanced CMOS Setup 57 Advanced CMOS Setup AMIBIOS SETUP – ADVANCED CMOS SETUP (C)2001 American Megatrends, Inc. All Rights Reserved 1st Boot Device CD/DVD 2nd Boot Device USB FDD 3rd Boot Device HDD S.M.A.R.T. for Hard Disks Enabled Password Check Setup TouchPad Support Enabled Share Memory Size 32MB USB 1.1 Device Legacy Support Enabled Display Expansion Support Enabled Available Options: Disabled HDD CD/DVD Intel UNDI, USB FDD ESC:Exit ↑ ↓:Sel PgUp/PgDn:Modify F1:Help F2/F3:Color Figure 6-3
Chapter 6 — Using the BIOS Setup Utility 58 Field Setting Function CD/DVD USB FDD 1st Boot Device 2nd Boot Device 3rd Boot Device HDD 1st Boot Device default is USB FDD. 2nd Boot Device default is CDROM. 3rd Boot Device default is IDE-0. Disabled S.M.A.R.T. for Hard Disks Enabled Only S.M.A.R.T. Hard Disks are supported. The default is Disabled. Disabled Display Expansion Support Enabled If you are using DOS or a 640 x 480 resolution to run windows, the display will not fill the entire screen. Enable this mode to expand the display to the entire screen. The default is Enabled. Setup The default value is Setup, which specifies that a password is only required to enter the setup utility. Password Check Always If Always is selected, the password is required when the system is booted up or resuming from a suspend-to-disk. 8MB 16MB Share Memory Size 32MB This field displays the amount of memory detected by the system during bootup. It allows you to select shared memory size for VGA usage. They are display only fields.
Using the BIOS Setup Utility —Power Management 59 Power Management This section of the BIOS manages` power settings in operating systems other than Windows 98 or above, or operating systems using ACPI power management. In Windows 98 or above, power management is controlled through the Power Management window in My Computer, and BIOS power management settings have NO effect. In other operating systems that use ACPI power management, BIOS settings likewise have no effect. AMIBIOS SETUP – POWER MANAGEMENT SETUP (C)2001 American Megatrends, Inc. All Rights Reserved Cover Close Panel Off Auto DIM Enabled Battery Auto Calibration Disabled FAN Auto Learning Disabled Available Options: Panel Off Stand by ESC:Exit ↑ ↓:Sel PgUp/PgDn:Modify F1:Help F2/F3:Color Figure 6-4
Chapter 6 — Using the BIOS Setup Utility 60 Field Setting Function Panel off The LCD will turn off when the cover is closed. Cover Close Suspend The LCD will turn off and the computer will enter suspend mode when the cover is closed. Enabled When AC adapter is not in use, the monitor is run in power-saving mode. Auto DIM Disabled The monitor does not go into power-saving mode. Disabled Batttery calibration is disabled. Battery Auto Calibration Enabled Battery calibration is endabled. Battery calibration will optimize the battery performance. Disabled FAN learning is disabled. FAN Auto Learning Enabled FAN learning is ensabled. FAN learning will optimize the fan speed.
Using the BIOS Setup Utility —Auto-Detect Hard Disk 61 Auto-Detect Hard Disk When Auto-Detect Hard Disk is selected, the BIOS will automatically detect Pri. Master and Sec. Master settings. AMIBIOS SETUP – STANDARD CMOS SETUP (C)2000 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy): Wed Jan 12,2001 Base Memory: 640 KB Time (hh/mm/ss) : 16:55:24 Extd Memory: 55 MB LBA Blk PIO 32Bit Type Size Cyln Head WPcom Sec Mode Mode Mode Mode Pri Master:User 12073Mb 23392 16 0 63 On On 4 On Sec Master: CDROM 4 On Boot Sector Virus Protection Disabled Month: Jan – Dec ESC:Exit ↑ ↓:Sel Day: 01 – 31 PgUp/PgDn:Modify Year: 1980 – 2099 F1:Help F2/F3:Color Figure 6-5
Chapter 6 — Using the BIOS Setup Utility 62 Change User Password With a User password, you can enter the Setup Utility and change or remove the User password, but you cannot enter the Setup Utility and change or remove the Supervisor password, nor enable diskette access if it has been disabled. Change Supervisor Password A supervisor password must be set before a lower-level user password can be set. After selecting Change Supervisor Password, press Enter. You will be prompted for the new password, and then again to verify it. Type in 6 or fewer keystrokes. If you make an error, press Esc to start over. Auto Configuration with Optimal Settings The Auto Configuration pages reset the computer to default values. The Auto Detect Hard Disks likewise helps users to configure their systems quickly. When you see the following prompt, choose Y to reset the computer to default values. Exiting and Saving Save Settings and Exit Select this option to save changes to the field values, and restart the computer using the new values. (Pressing F10 from any of the menu screens also allows you to save settings and exit.) Exit Without Saving Select this option to discard any changes you have made to the field values, and restart the computer using the old values. Load high performance settings (y/n)? N Enter new supervisor password:
AAppppeennddiixx AA FFrreeqquueennttllyy AAsskkeedd QQuueessttiioonnss
Appendix A — Frequently Asked Questions 64 Frequently Asked Questions Q: My screen seems to time out too quickly. I have to constantly hit a key or move the mouse in order to bring it back. How can I adjust the screen time-out? A: This is part of Windows Power Management. Access Power Management by clicking on Start / Settings / Control Panel / Power Management. Adjust the display time-out by selecting a time next to the Turn off monitor option. You may also select different time-out values for adapter and battery power states. Q: I've heard that cleaning up and rearranging files on the hard drive will improve the startup speed of my programs. How do I do this? A: Hard disk maintenance can improve the startup speed of programs. This maintenance includes deleting unnecessary files, and defragmenting, which rearranges data into more efficient groupings. Windows includes utilities for performing these maintenance tasks. In Windows 98, for example, go to Start/Programs /Accessories /System Tools. Run Disk Cleanup to remove unnecessary files, and Disk Defragmenter to defragment the hard drive. For more information, refer to Windows documentation. Q: The internal fax/modem dial tone sound is too low. How can I increase the volume? A: There are two methods to adjust the volume of the internal fax/modem dial tone: Method 1: Double-click the Volume Control icon on the Windows task bar. Adjusting the slide bar under PCSpkr will adjust the volume of the internal fax/modem dial tone. Method 2: Use the volume control button on the front of the computer. Q: What kind of external microphone can I use with my notebook computer? A: You will need to use a self-amplifying microphone.
Appendix A — Frequently Asked Questions 65 Q: There is feedback noise coming from my speakers. What can I do? A: Double click on the Speaker icon on the task bar. Then, under Microphone Balance, check the Mute box. Q: Because of a software problem, I was unable to shut down power normally. I pressed the power button to force a power off, but it didn't work. How can I force a power off? A: Make sure you press the power button for at least 4 seconds. Normally, this will force a power off. If this does not work, you can shut down the computer by inserting a needle into the reset button pinhole. (The reset button locate on the computer bottom side.) Q: Why can’t I charge the battery of my portable computer after it was out of use for some time? A: After portable computers have not been used for a long time (more than one month), the batteries will go into the low voltage protection mode due to data back-ups and natural electrical discharge. At that point, restoring normal voltage will require slow charging over a period of several hours. Calibration can be performed after the battery has returned to a normal condition. Q: My computer alerts “CMOS Battery Low”, what can I do? A: If you keep your computer in no power situation (unplug the computer from the power outlet and remove battery at the same) over 45 days, your data in CMOS will be lost. Please reconfigure your CMOS by following steps: 1. Press F1 to enter the BIOS setup utility. 2. Select “Auto Configuration with Optimal Settings”. When you see the following prompt, choose <Y> and then press <Enter>. Load high performance settings (y/n)? Y
Appendix A — Frequently Asked Questions 66 3. Select “Save Settings and Exit”. When you see the following prompt, choose <Y> and then press <Enter> to restart your computer. Save current settings and exit (y/n)? Y 4. When you see the following sentence “FAN never Learned. Do it in BIOS Setup. Otherwise, Smart FAN function is invalid. Press F1 to Run SETUP” then press F1. 5. In the BIOS Setup Utility, select “Power Management Setup”, choose “FAN Auto Learning” then press <PgDn>. It will take about 20 minutes to complete FAN Auto Learning. 6. Press the power button to shut off your computer.
AAppppeennddiixx BB SSttaatteemmeennttss
Appendix B — Statements 68 Statements Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and the receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. Shielded interconnect cables and shielded AC power cable must be employed with this equipment to insure compliance with the pertinent RF emission limits governing this device. Changes or modifications not expressly approved by the system's manufacturer could void the user's authority to operate the equipment. Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: • This device may not cause harmful interference • This device must accept any interference received, including interference that may cause undesired operation.
Appendix B — Statements 69 About The Modem This equipment complies with Part 68 of FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. The modem jack of this equipment complies with Sub-part F of Part 68 of FCC rules. The REN is used to determine the quantity of devices that may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to the line, as determined by the total RENs contact the telephone company to determine the maximum REN for the calling areas. If the terminal equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. However, if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a compliant with the FCC if you believe it necessary. The telephone company may mark changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service. If trouble is experienced with this equipment, please contact the manufacturer for repair and (or) warranty information. If the trouble is causing harm to the telephone network, the telephone company may request you remove the equipment from the network until the problem is resolved. The equipment cannot be used on public coin service provided by the telephone company. Connection to Party Line Service is subject to state tariffs. (Contact the state public utility commission, public service commission or corporation commission for information.) The Telephone Consumer Protection Act of 1991 marks it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual
Appendix B — Statements 70 sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) To program this information, refer to the manual of the communication software. European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms: z EN 55022 ( CISPR 22 ) Radio Frequency Interference z EN 55024 ( EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8,EN61000-4-11, EN61000-3-2, EN61000-3-3 ) Generic Immunity Standard z EN 60950 ( IEC950 ) Product Safety Regulatory statement (R&TTE / WLAN IEEE 802.11b & 802.11g) European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835GHz; In France, the equipment must be restricted to the 2.4465-2.4835GHz frequency range and must be restricted to indoor use. CE Declaration of Conformity !0984 Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. The equipment was passed. The test was performed according to the following European standards: z EN 300 328 V.1.4.1 (2003-04) z EN 301 489-1 V.1.3.1 (2001-09) / EN 301 489-17 V.1.1.1 (2000-09)
Appendix B — Statements 71 z EN 50371: 2002 z EN 60950: 2000 UL CAUTION To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. Do not use the telephone to report a gas leak in the vicinity of the leak. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. Canadian Department of Communications This class B digital apparatus meets all requirements of the Canadian Interference-causing Equipment Regulations. About the Modem The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. The department does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company's inside writing associated with a single line individual service may be extended by means of a certified connector assembly (telephone extension cord). The
Appendix B — Statements 72 customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. "The Load Number (LN) assigned to each terminal device denotes the percentage of the total load to be connected to a telephone loop which is used by the device. To prevent overloading, the termination on a loop may consist of any combination of devise subject only to the requirement that the total of the Load Numbers of all the devices does not exceed 100." Battery Disposal THIS PRODUCT CONTAINS A LITHIUM-ION OR NICKEL-METAL HYDRIDE BATTERY. IT MUST BE DISPOSED OF PROPERLY. CONTACT LOCAL ENVIRONMENTAL AGENCIES FOR INFORMATION ON RECYCLING AND DISPOSAL PLANS IN YOUR AREA. CAUTION FOR ADAPTER THIS NOTEBOOK COMPUTER IS FOR USE WITH MODEL NO. PA-1600-05F7 BATTERY CAUTION DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
Appendix B — Statements 73 CLASS 1 LASER PRODUCT LASERSCHUTZKLASSE 1 PRODUKT TO EN60825 CAUTION: THIS APPLIANCE CONTAINS A LASER SYSTEM AND IS CLASSIFIED AS A "CLASS 1 LASER PRODUCT.” TO USE THIS MODEL PROPERLY, READ THE INSTRUCTION MANUAL CAREFULLY AND KEEP THIS MANUAL FOR FUTURE REFERENCE. IN CASE OF ANY TROUBLE WITH THIS MODEL, PLEASE CONTACT YOUR NEAREST "AUTHORIZED SERVICE STATION.” TO PREVENT DIRECT EXPOSURE TO THE LASER BEAM, DO NOT TRY TO OPEN THIS ENCLOSURE. FCC warning statement 15.105 Federal Communications Commission (FCC) Requirements, Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. Regulatory information / Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference
Appendix B — Statements 74 caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. IMPORTANT NOTE (CO-LOCATION) FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. IC warning statement WLAN “To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.” This Class B digital apparatus complies with Canada RSS-210. Cet appareil numérique de la classe B est conforme à la norme CNR-210 du Canada The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. (DoC) The term “IC:” before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Navigation menu