Avery Dennison Retail Information Services 6037LA3021 2.4 GHz Wireless Scanner/Printer User Manual Corel Ventura 6032EMCV CHP

Avery Dennison Retail Information Services, LLC 2.4 GHz Wireless Scanner/Printer Corel Ventura 6032EMCV CHP

Users Manual

MonarchPathfinder UltraGold PrinterTC6037EM Rev. AA 7/02 ©2002 Paxar Corporation. All rights reserved.FCC ID: GU66037LA3021
Each product and program carries a respective written warranty, the onlywarranty on which the customer can rely. Monarch reserves the right to makechanges in the product and the programs and their availability at any time andwithout notice. Although Monarch has made every effort to provide completeand accurate information in this manual, Monarch shall not be liable for anyomissions or inaccuracies. Any update will be incorporated in a later edition ofthis manual.©2002 Paxar Corporation. All rights reserved. No part of this publication maybe reproduced, transmitted, stored in a retrieval system, or translated into anylanguage in any form by any means, without the written permission of PaxarCorporation.TrademarksMonarch®, Pathfinder®, Ultra®, 6037, 6076, 9462, and 9464 are registered trademarks of Monarch MarkingSystems, Inc.Paxar is a trademark of Paxar Corporation.RBRC® is a trademark of Rechargeable Battery Recycling Corporation.Paxar Corporation170 Monarch LaneMiamisburg, OH 45342
Table of Contents iTABLE OF CONTENTSIntroduction .....................................................................................1-1Getting Started...............................................................................1-1Using this Manual ...........................................................................1-2Using Batteries ................................................................................2-1Using the Main Battery....................................................................2-1Charging the Main Battery............................................................2-2Changing the Main Battery ...........................................................2-2Using the Backup Battery ................................................................2-3Changing the Backup Battery .......................................................2-4Battery and Safety Information.........................................................2-6Using Supplies .................................................................................3-1Loading Supplies ............................................................................3-1Loading for Peel Mode.................................................................3-3Loading for Non-Peel Mode ..........................................................3-6Removing Supplies .........................................................................3-6Basic Operations..............................................................................4-1Using the Keypad ...........................................................................4-1Entering Data .............................................................................4-2Using the Display ...........................................................................4-3Reading the Status Line...............................................................4-3Scanning Bar Codes .......................................................................4-3Certification Note............................................................................4-5Printing .........................................................................................4-6Power Management ........................................................................4-6
ii Table of ContentsRadio Frequency Communications....................................................4-6Attaching the Safety Strap...............................................................4-7Helpful Reminders ..........................................................................4-8Care and Maintenance ......................................................................5-1Cleaning ........................................................................................5-1Printhead ...................................................................................5-2Platen Roller ..............................................................................5-3Pinch and Feed Rollers................................................................5-4Sensors .....................................................................................5-4Scanner Window .........................................................................5-5Clearing Supply Jams .....................................................................5-6Storing the Printer ..........................................................................5-7Troubleshooting...............................................................................6-1Error Codes................................................................................6-2Glossary ..........................................................................................6-1Reference Information ......................................................................6-3Specifications.................................................................................6-3Accessories/Options .......................................................................6-4
Introduction 1-1INTRODUCTIONThe Monarch® Pathfinder® Ultra® Gold 6037™ printer prints,scans bar codes, collects data, and communicates with other devices.Your System Administrator must configure it for you to use.This manual describes how to use these printers.Getting StartedTo start using the printer, you must:1. Charge the main battery. See “Charging the Main Battery” inChapter 2.NOTE: You must charge the battery before using it. For optimal batterylife, charge the battery within three months of receipt.2. Insert the main battery and the backup battery in the printer. See“Changing the Main Battery” and “Changing the Backup Battery” inChapter 2.3. Attach the safety strap found in the documentation package. See“Attaching the Safety Strap” in Chapter 4.1
1-2 Introduction4. Load supplies in the printer. See “Loading Supplies” in Chapter 3.5. Turn on the printer.NOTE: Your System Administrator must load an application in the printerbefore you can use it.Using this ManualFollowing is a summary of the contents of this manual.Chapter Contents1 Introduction Information you should know before using the printer.2 Using the Battery Charging, changing, and using batteries safely.3 Using Supplies Supply loading and removal.4 Basic Operations Everyday printer usage.5Care andMaintenanceClearing supply jams and cleaning the printer.6 Troubleshooting Common problems and their solutions.A Glossary Printer terms and their definitions.BReferenceInformationPrinter specifications and accessories/options.The printer’s end user should read this manual. This person uses theprinter to print and scan bar codes.In addition to this manual, you also have a printed, quick-referenceversion of this manual. Other documentation is available on our Web site(www.monarch.com).
Using Batteries 2-1USING BATTERIESThe 6037 printer uses two batteries: a main battery and a backupbattery. Both are located in a compartment at the bottom of the printer’shandle.Battery UseMain Running the printer. Several other Monarch printers alsouse this battery, which is rechargeable.Backup Maintaining the system settings.Using the Main BatteryThe printer’s main power source is a 7.4V lithium-ion battery.NOTE: The printer takes only this battery. Do Not substitute batteriesfrom any other manufacturer.You must charge the battery when you receive the printer, even if you donot use it right away.2
2-2 Using BatteriesCharging the Main BatteryTo charge the main battery, use either the Monarch 9462™ single-stationor 9464™ four-station battery chargers. See the documentation for thosechargers for more information. Charging time is approximately 1.5 – 3hours.WARNING: The battery might explode if placed on a different charger.Changing the Main BatteryTo change the main battery:1. Turn the printer over and press the button on the battery compartmentdoor (at the bottom of the printer’s handle) and slide it open (the doorstays attached). The main battery pops out slightly.BatteryCompartmentDoorButton
Using Batteries 2-32. Pull the main battery out of the compartment. Or, place your handbeneath the printer, turn it upright, and catch the battery in your handas it slides out.3. Insert a new battery into the compartment (non-ribbed end first).4. Slide the compartment door shut. You will have to press the batteryin slightly so the door fits over it. When the door shuts, you hear itclick into place.Using the Backup BatteryThe backup battery is a 3-volt lithium coin cell.You can buy additional backup batteries at moststores.You must switch backup batteries when you receivea CMOS error.MainBattery
2-4 Using BatteriesChanging the Backup BatteryTo change the backup battery:1. Turn the printer over and press the button on the battery compartmentdoor (at the bottom of the printer’s handle) and slide it open (the doorstays attached). The battery pops out slightly.2. Pull the main battery out of the compartment. Or, place your handbeneath the printer, turn it upright, and catch the battery in your handas it slides out.BatteryCompartmentDoorButtonMainBattery
Using Batteries 2-53. Remove the backup battery by turning it slightly counterclockwise,and pulling it out.4. At the same angle, place the new battery (positive side facing awayfrom the main battery) at the edge of the track. As you push it in, itwill straighten itself.5. Replace the main battery.6. Slide the compartment door shut. You will have to press the mainbattery in slightly so the door fits over it. When the door shuts, youhear it click into place.BackupBattery
2-6 Using BatteriesMain Battery Safety Information♦ You must charge the battery before using it. For optimal battery life,charge the battery within three months of receipt.♦ WARNING: The battery might explode if placed on a differentcharger.♦ Take the battery out of the printer when storing the printer for a monthor longer.♦ The optimal battery storage temperature is 50°F – 73°F (10°C – 23°C),with a maximum of 104°F (40°C). The battery may lose its chargecapacity permanently if stored at temperatures less than 32°F (0°C) orgreater than 104°F (40°C). For longest life, the battery should bestored in a cool, dry place.♦ The recommended temperature for charging is 68°F – 77°F (20°C –25°C)♦ Disposal Information – Do not throw in trash. Dispose to your localregulations. The Rechargeable Battery Recycling Corporation(RBRC®) is a non-profit organization created to promote recycling ofrechargeable batteries. For more information about how to recyclebatteries in your area, visit www.rbrc.org. Batteries can also bereturned postage-paid to: ERC; 200 Monarch Lane Door #39;Miamisburg, OH 45342.CAUTIONDo Not disassemble, short-circuit, heat above80°C, or incinerate the battery. It may explode.♦ The battery should be charged immediately for either long-termstorage or after the battery has been exhausted from a printingsession. Frequent charging will actually prolong battery life and hasno negative effects such as memory issues.♦ Do not let the battery come into contact with metal objects.♦ Do not use a battery with a cracked case.
Using Batteries 2-7♦ Do not let the battery get wet.♦ The operating temperature for the battery is the same as for theprinter. See “Specifications.”♦ It is normal for battery capacity to decrease up to 20% over the first300 cycles of use.♦ The battery should be charged immediately for either long-termstorage or after the battery has been exhausted from a printingsession. Frequent charging will actually prolong battery life and hasno negative effects such as memory issues.♦ The printer uses battery power even when the printer is not printing.Remove the printer’s battery and place on a charger when the printeris not in use.♦ Many factors affect your battery’s performance, including the quantityof labels printed, intervals of batches printed, percentage of black perlabel, and power maangement.
2-8 Using Batteries
Using Supplies 3-1USING SUPPLIESThe printer can use three types of supplies:♦ Labels♦ Tags♦ Receipt PaperThere are two print modes. The way you load the supplies depends onthe print mode you use.♦ Peel mode removes the backing paper from the supplies as it printsthe labels. This mode allows you to apply the label immediately. It isonly for labels. If you have purchased and selected the on-demandsensor, you must press the trigger between labels. Otherwise, thenext label prints only when the previous one is applied.♦ Non-Peel mode does not remove the backing paper. It is for labelsprinted in a continuous strip, tags, and receipt paper.Loading SuppliesTo load supplies:1. Turn on the printer. (The power key is at the top right of the keypad.)The application starts running.2. Maneuver to the point where you are prompted to load the supplies.3
3-2 Using Supplies3. Press the latch buttons and open the supply cover completely.4. Remove the seal from the supply roll.5. Spread the spring-loaded supply holder tabs apart.Supply HolderTabsLatchButtonsSupply Cover
Using Supplies 3-36. Place the supply roll in the supply holder so it feeds labels from thebottom. The black marks on the labels should face down.NOTE: Specialty paper has no black marks.7. Load the supplies for the print mode you want. See “Loading for PeelMode” or “Loading for Non-Peel Mode.”Loading for Peel ModeTo load supplies for peel mode:A. Peel and discard the first four inches of labels from the backingpaper.NOTE: Do Not tear the supplies at the four-inch point; just peel thelabels.
3-4 Using SuppliesB. Hold the printer upright and gently press down on the label deflector.It may be stiff.C. Feed all four inches of the backing paper over the peel bar and underthe applicator roller and the label deflector.D. Push the label deflector up until it snaps into place.LabelDeflectorPeel BarLabel DeflectorApplicator Roller
Using Supplies 3-5E. Partially close the supply cover to the first position.NOTE: Do Not close the cover completely at this step or label jams mayoccur.F. Hold the supply edge between the feed and pinch rollers (located justabove the trigger), and press the trigger. Discard the extra labelsthat feed.G. Close the supply cover completely.H. Press the trigger or key assigned by your System Administrator toremove all slack. Discard the extra labels that feed.Pinch Roller(Feed Roller isbehind it)
3-6 Using SuppliesLoading for Non-Peel ModeTo load supplies for non-peel mode:A. Feed the supply under the applicator roller and over the labeldeflector.B. Close the supply cover completely.C. Press the trigger or key assigned by your System Administrator toremove all slack. Discard the extra labels that feed.Removing SuppliesTo remove supplies:1. Peel mode only. Tear the backing paper just above the pinch roller.2. Open the supply cover completely.Applicator RollerLabel Deflector
Using Supplies 3-73. Spread the supply holder tabs apart with one hand and remove thesupply roll.4. Peel mode only. Carefully pull out the supply backing paper still inplace between the pinch and feed rollers.
3-8 Using Supplies
Basic Operations 4-1BASIC OPERATIONSThis chapter explains the printer’s features and how to use them.Using the KeypadThe printer keypad appears below.Key(s) DescriptionEnter Accepts data or a menu selection.Ctrl For future use.Alt Displays a special character when pressed with a 3-digitnumber. Your System Administrator will tell you what numberto use.Tab For future use.Fct Performs a specially-defined function when pressed with asingle-digit number.Delete Clears the entire line that the cursor is currently on.4
4-2 Basic OperationsKey(s) DescriptionBksp Moves the cursor one space to the left and deletes thecharacter in that position. Or, deletes the current line whenpressed with Shift.Shift ♦ Displays a letter.♦ Deletes all data on the current line when pressed with Bksp.Esc Moves to the previous menu, or exits the current module orprogram.Arrows Moves between items in a menu.On/Off Turns the printer on and off.Space Enters a space character.Numeric/AlphabeticDisplays a numeric digit or letter.Symbols Displays the character shown on the face of the key.Entering DataThere are three data entry modes:♦ Numeric/Symbol mode – Default. Press the key to display whatappears on the face of the key.♦ Alphabetic mode – Press Shift to display letters or delete the currentline.♦ Special Key mode – Press a special key (Fct or Alt) to accessfunctions or display special characters).
Basic Operations 4-3Using the DisplayThe display has eight lines and one status line.Reading the Status LineThe status line has the following indicators:Indicator DescriptionFYou have pressed the Fct key, and the printer is in Special Keymode. This mode remains in effect through the next key press.To return to Numeric/Symbol mode without accessing a function,press the Fct key again.AYou have pressed the Alt key, and the printer is in Special Keymode. This mode remains in effect until you enter a 3-digitnumber. To return to Numeric/Symbol mode without entering anumber, press the Alt key again.CFor future use.SYou have pressed the Shift key, and the printer is in Alphabeticmode. This mode remains in effect until you press the Shift keyagain.The printer is in Normal mode if no indicator is on the display.Scanning Bar CodesYour printer may have a built-in scanner.When you scan depends on the application the printer is running. It willmost likely prompt you on the display to press a certain key (probably thetrigger). When you press it, you activate the scanner.
4-4 Basic OperationsTo scan a bar code:1. Attach the safety strap to your wrist.2. Point the scanner at a slight angle approximately 4 – 8 inches fromthe bar code symbol.3. Press the trigger or other key specified by your System Administrator.CAUTION: Do Not stare into the beam.The laser scan LED lights green after a successful scan. It lights amberafter an unsuccessful scan. This light is at the upper right of the keypad,to the left of the On/Off key.
Basic Operations 4-5If the bar code does not scan:♦ Change the scanner’s angle slightly and try again.♦ Clean the scanner window. See “Cleaning” in Chapter 5 for moreinformation.♦ Move the scanner 4 – 8 inches away from the bar code. Adjust thisdistance as needed to find the correct distance.♦ Try scanning another bar code that you have scanned successfully. Ifthat scan is successful, the scanning problem is with the bar code.♦ Move to a more dimly lit area.♦ Ensure there are no voids (streaks) in the bar code symbol.If the scan is still unsuccessful, ask your System Administrator to performa scanner test.Certification NoteThis product is certified to be a Class II laser product with the UnitedStates DHHS Center for Devices and Radiological Health. The scanneremits less than 1.3 milliwatt beam of laser light from the scanning window. Laserlight in excess of Class I limits must be inside a protective cover. Nomaintenance is required to keep this product in compliance with IEC 825and DHHS Regulation 21, Subchapter J. No controls are provided foroperation or maintenance.
4-6 Basic OperationsPrintingWhen and how you print depends on your printer’s application. It mayprint♦ only after you press a certain key.♦ automatically as soon as you press a key.♦ automatically with no input from you.♦ one or many labels at once.Power ManagementIf the printer stays on, but you do not use it for a while, it goes into sleepmode to conserve power. The printer wakes up when you start using itagain.Radio Frequency CommunicationsYour printer may be able to communicate with other printers or a basestation via radio frequency (RF) communications. Your SystemAdministrator can tell you if you have this feature and any specialprocedures you need to perform.
Basic Operations 4-7Attaching the Safety Strap1. Turn the printer upside down, resting its top on the table.2. Take the thin end of the safety strap, and push it through the loop atthe bottom of the printer handle (near the battery compartment).3. Push the thick end of the safety strap through the thin end’s loop.4. Pull the strap. It may be necessary to help the thin end’s loop fit overthe plastic piece in the middle of the strap.
4-8 Basic Operations5. Pull the strap tight.Helpful Reminders♦ Always start with a fully-charged battery.♦ Attach the safety strap to your wrist before using the printer.♦ Do Not pound the printer when applying labels printed in peel mode.♦ Switch to a fully-charged battery every time you load a new roll ofsupplies (doing so ensures optimum print quality).♦ Turn the printer off when not using it.♦ Operate and store the printer with the recommended temperature andhumidity ranges. See Appendix B, “Reference Information,” for moreinformation.
Care and Maintenance 5-1CARE AND MAINTENANCECaring for and properly maintaining your printer protects it andkeeps it running smoothly. This chapter explains how to♦ clean the printhead, platen roller, sensors, and scanner window.♦ clear supply jams.♦ store the printer.CleaningIt is important to keep the printer clean. There are four main areas thatyou must clean:♦ Printhead♦ Platen Roller♦ Sensors♦ Scanner WindowTo clean the printer, you can use♦ Monarch Cleaning Pen #114226♦ Monarch 6076™ Cleaning Kit.♦ a soft cloth moistened with isopropyl alcoholDo Not use sharp objects to clean the printer. Use isopropyl alcohol onthe interior areas only; never on the exterior.5
5-2 Care and MaintenancePrintheadClean the printhead♦ after using 7-10 rolls of supplies.♦ in extreme temperatures, humid conditions, or a dirty environment.♦ when you see voids in the print.♦ after a supply jam.Do Not use silicone to clean or lubricate. Do Not use sharp objects toremove adhesive or label particles from the printhead area. Do Nottouch the printhead with your fingers. These actions may damage theprinthead and void your warranty.To clean the printhead:1. Turn off the printer.2. Open the supply cover and remove the supply roll. See “RemovingSupplies” in Chapter 3.3. Check the supply holder for adhesive buildup, and clean it, ifnecessary.4. Ground yourself by touching metal on something other than theprinter. Grounding prevents electrostatic discharge, which maydamage your printer.
Care and Maintenance 5-35. Clean the printhead area of all adhesive and label particles using oneof the items listed above.6. Reload the supply roll and close the supply cover.Platen RollerTo clean the platen roller:1. Turn the printer off and open the supply cover.2. Remove the supplies. See “Removing Supplies” in Chapter 3.3. Hold the printer upright and gently press down on the label deflector.It may be stiff.4. Clean the platen roller and remove any adhesive buildup.PrintheadPlaten Roller
5-4 Care and Maintenance5. Turn the platen roller with your finger, and then continue cleaning.6. Reload your supply and close the label deflector and supply cover.Pinch and Feed RollersTo clean the pinch and feed rollers:1. Turn the printer off and open the supply cover.2. Remove the supplies. See “Removing Supplies” in Chapter 3.3. Turn the platen roller with your fingers. This action also turns thepinch and feed rollers.4. Clean any adhesive buildup you see as the rollers turn.5. Reload the supplies after the printer dries.SensorsTo clean the on-demand sensor:1. Turn the printer off and open the supply cover.2. Remove the supplies. See “Removing Supplies” in Chapter 3.3. Open the label deflector by gently pressing down with two fingers.4. Clean the on-demand sensor with a soft cloth moistened with water.5. Reload the supplies and close the label deflector and supply cover.On-Demand Sensor
Care and Maintenance 5-5To clean the black mark sensor:1. Turn the printer off and open the supply cover.2. Remove the supplies. See “Removing Supplies” in Chapter 3.3. Clean the black mark sensor with a soft cloth moistened with water.4. Reload the supplies and close the supply cover.Scanner WindowClean the scanner window whenever it appears to be dirty or smeared.To clean it:1. Moisten a soft cloth with water.2. Wipe the window until it is completely clean.Black MarkSensor
5-6 Care and MaintenanceClearing Supply JamsTo clear a supply jam:1. Turn off the printer.2. Open the supply cover completely.3. Open the label deflector by gently pressing down on it with twofingers.4. Remove the supplies. See “Removing Supplies” in Chapter 3.5. Carefully remove any jammed supply and close the deflector.NOTE: Do Not pull the jammed supply out through the front of the labeldeflector. Do Not use sharp objects to remove jammed supplies.6. Carefully remove any jammed supply between the pinch and feedrollers.7. Reload the supplies and close the label deflector.Pinch Roller(Feed Roller isbehind it)
Care and Maintenance 5-7Storing the PrinterDo Not store the printer in or near♦ magnetic fields♦ wet or damp areas♦ dirty or dusty areas♦ areas of intense vibration or shock.
5-8 Care and Maintenance
Troubleshooting 6-1TROUBLESHOOTINGFollowing are some common printer problems and their solutions.Problem SolutionPrinter will not feed. Switch to a fully-charged battery.Close the supply cover completely.Load the supply correctly.Check the platen roller for jammed labels.Printer will not print. Switch to a fully-charged battery.Load the supply correctly.Clean the printhead.Print has voids or is too light. Load the supply correctly.Close the supply cover completely.Switch to a fully-charged battery.Clean the printhead.Check the supply for damage or defects.Printer partially prints on thesupply and fails to respondto the keypad or trigger.Load the supply correctly or load new supplies,if necessary.Clear any supply jams.Clean the printhead.Switch to a fully-charged battery.CMOS Error Replace the backup battery. See “Using theBackup Battery” in Chapter 2.Scanner will not scan a barCode.See “Scanning Bar Codes” in Chapter 4.The display does not turn on. Make sure the power is on.Switch to a fully-charged battery.6
6-2 TroubleshootingError CodesFollowing are some common error codes you may receive and theirmeanings.Code(s) Description004 - 005 Supply size is incorrect. Reload the correct supplies.267 – 271410 - 413Communication error. See your System Administrator.703 - 704 Supply Error. Load supplies or make sure they are loadedcorrectly.750 Printhead is overheated. Turn off the printer to let it cool.751 - 753 The printer sensed a problem with a mark on the supplies.Check the supplies to see if they are loaded correctly.756 The printer is out of supplies. Load supplies.757 Load supplies. The calibrated supply length differs by plusor minus .25 inches from the format.758 Check supply. Either the supply is not seen, or the on-demand sensor is broken (purchase optional). Check for alabel jam. Clear the supply path or reload supplies. Theprinter does not recalibrate after this error.762 Low battery. Recharge the battery.763 Waiting to dispense label. Press Enter.768 Printhead error. See your System Administrator.790 - 791 The printer is busy or has an error pending. Turn off theprinter. Wait two seconds and turn it back on.904 – 911 System error. See your System Administrator.SYSTEMERRORVECTOR ##System error. See your System Administrator.If these solutions do not work or you have a problem or error code notlisted, see your System Administrator or call Service at the number listedon the back of this manual.
Glossary A-1GLOSSARYTo use this printer, you should be familiar with the following terms.Term DefinitionAlphabeticmodeThe print mode where the user presses the Shift key to♦ display a letter.♦ delete all data on the current line when pressed withBksp.Bar code A sequence of vertical black and white bars or a square ofblack and white dots. The spacing and thickness of thesebars or dots is a way of representing data. A scannerreads bar codes.Non-peel mode The print mode that does not remove the backing paper. Itis for labels printed in a continuous strip, tags, and receiptpaper.Numeric/SymbolmodeThe default data entry mode. In it, the user presses a keyto display what appears on the face of the key.Peel mode The print mode that removes the backing paper from thesupplies as it prints the labels. This mode allows you toapply the label immediately. It is only for labels.Platen roller The surface in the printer that the supply is held against. Itrotates, helping to move the supply along.Printhead The surface in the printer where the printing occurs, Thesupply moves across the printhead to get the label printed.RF Radio frequency. A special type of printer communicationin which it “talks” to a base station without a cable.Sensor A device that “sees” a new label has started. It works byusing either black marks on the back of the supplies orsensing when a label ends.Supplies The paper (labels, tags, or receipt paper) printed on.Special keymodeThe data entry mode after the user presses the Fct or Altkeys and then a number to access functions or displayspecial characters.A
A-2 Glossary
REFERENCE INFORMATIONSpecificationsDimensions: Width – 7.75" (197mm)Length – 3.25" (83mm)Height – 6.50" (165mm)Weight – 2.2 lbs. (1 kg)Shipping Weight – 5.86 lbs. (2.66 kg)Printhead: 1.89" (48mm/384 dots) (203 dots per inch)Printing: Thermal direct (no ink /ribbon)Print Speed: Up to 4" (102 mm) per secondMemory: 1MB RAM and 2MB FlashBattery Type: 7.4V Lithium Ion (110V – 240V AC adapter)3V Lithium Coin CellBattery RechargeTime: 1 – 3 hours, depending on the charger used.Supply Sizes: Width 1.2", 1.5", and 2.0" (30mm, 38mm, and 51mm)Lengths .785" – 4.0" (20mm – 102mm)Peel mode supports .785" (20 mm) or greater lengths.Non-Peel mode supports .55" (13.97mm) or greaterlengths.OperatingTemperature: 40°F – 110°F (4°C – 43°C)Humidity (Operating& Storage): 5% – 90% non-condensingB
Accessories/Options♦ On-demand sensor♦ 9462 Single-Station Battery Charger♦ 9464 4-Station Battery Charger♦ AC Power Supply (110V – 240V)—operating range is 95V – 264V♦ Integrated Laser Scanner (regular or high-speed)♦ Memory or Radio Cards♦ Extra Battery♦ Documentation*♦ Wrist Strap♦ Software Development Kit**Available on Web site (www.monarch.com)

Navigation menu