Avery Dennison Retail Information Services 9485BT Mobile Printer User Manual LK P12B
Avery Dennison Retail Information Services, LLC Mobile Printer LK P12B
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1801217 |
| Application ID | NlC/Yn3zvDO1GS8SnCuulw== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 376.81kB (4710181 bits) |
| Date Submitted | 2012-09-25 00:00:00 |
| Date Available | 2012-09-28 00:00:00 |
| Creation Date | 2012-07-11 19:37:17 |
| Producing Software | Haansoft PDF 1.3.0.410 |
| Document Lastmod | 2012-07-11 19:37:50 |
| Document Title | User Manual (LK-P12B).pdf |
| Document Creator | Haansoft PDF 1.3.0.410 |
| Document Author: | effect |
All spemkauons are subject to mange wmmm mice (aution Disposal of Old ElectricalEaEIectroni: Equipmeanlitable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling or electrical and electronic equipment. For more detailed iniornration about recycling ol this product, please contact your local city oflice, your household waste disposal service or the shop where you purchased the product 1. Unpacking 2. Product overview 3. Installation & Usage 3-1. Display 3-2. Installing the Battery 3-3. Removing the Battery 3-4. Charging the Battery 3-5. Using the Vehicle Charger 3-6. Installing Belt Clip Loouxraacn4>4>ww 3-7. Stock Installation ._. 3-8. Peel Mode ._. 3-9. Shoulder Strap Installation ,_. 3-10. Diagnostic Test ._t 4. Peripherals Connection ._. ul 4-1. Bluetooth connectionfion ._t 4-2. Interface Cable Connection ._. 5. Printer Cleaning ,_. \l 5-1. PrintHead Cleaning ._a \r 5-2. Platen Roller Cleaning ._a 00 6. Product Specification ,_. so 6-1. Specification ._a so 7. CPCL Command Compatibility ,_t Front PEELERWING PEELER BODY DISPLAY SERIAL Rear BATTERY COVER BELT CLIP CONNECTOR SHOULDER STRAP RING CHARGER CONNECTOR 3-1. Control Panel Usage Paper Feed! Down button Advances the supply. Clears error message. Moves down through menu options. 3-2. Installing battery Enter button Selects the highlighted menu option. Up button Moves up through menu options. Power button Turns the printer on and off. Press for two seconds to turn power on. Press for three seconds to turn power off. Wakes the printer irom sleep mode. Replace the battery door. NOTE 3-3. Battery remove! 3-4. Battery Charging 1. Turn off the primer. 2. Be sure that the AC plug is correct. if AC plug is wrong, change the plug to the correct one. 3. Open the DC jack by pulling on the rubber cover and insert DC jack into the printer. 4. Plug the AC plug into an electrical outlet. 5. The charge indicator LED (located on the AC charger as shown) shows red or green according to the status. Remove the battery door. Lift out the battery. 1Th f m in char in Charging Lamp “ Green NOTE 3-5 Usage of Cigar Jack Charger 3-6. Belt clip Usage Connect the vehicle charger to the printer. 2 ~ 24V .4V 0.8 N LZA NOTE NOTE 3-7. Roll Paper Installation Open the Paper cover by pressing the Open button and set the width of paper guide by turning the knob with finger. Put the star: In so it unrolls from the bottom. Remove the stock core when it is empty. Pull a short length of stock out of the printer. Press the Feed Key once to arrange the paper. 3-8. Peel Mode With a roll of stock installed, slide the peeler body towards the back of the printer. Lift the peeler wing and slide the peeler body towards the front of the printer. Press the feed button. 3-9. Shoulder Strap lnstallatlor Press and hold the feed Insert the strap into the hook on the printer. button and power button. I!“ NOTE Place the end of the strap into After pulling out the end 0f the The information label prints. the hook at shuulder strap. 51730 tightly, put it into the din to be fastened. The sum Ie of self test rintout p p This printer can communicate with Peripherals device via Bluetooth and cables. 4-1 Bluetooth Connection 1. Printer can be connected to the PDA and PC which can do wireless communication. 2. By using Bluetooth function supported in PC, printer can be connected. Upon initial installation or for troubleshooting, you can run the diagnostic test to get information about: Firmware version, emulation, codepage. sensor settings, interface settings, etc. NOTE _ _ Refer to the Bluetooth Manual for more details on connection. If no issues are found with diagnostic test. examine other devices and software. The diagnostic test is working independent 01 devices and softvimre. 0 Do not overheat the motor 4-2. Int rf I nn ti n e ace Cab 9 Co ec o If the interior of the printer is dusty, printing quality can be lowered. In this case, follow the instructions below to clean the printer. 5-1. PrintHead Cleaning 1. Use an applicator swab moistened with an isopropyl alcohol to clean the print head and remove any dusts. 2. Once cleaning is complete, allow lite printer to dry then install the stock and close the cover. 1. Connect USB or Serial cable into the cable connector on the printer. NOTE Use the cable offered by the manufacturer (USB, Serial) 2. Connect the interface cable into the USB or Serial port of the device (PDA, PC. etc.) 6-1. Specification Printing Method Direct Thermal 5-2. Platen Roller Cleaning 1.Clean the platen roller with a clean soft cloth moistened with isopropyl alcohol or a cleaning pen. puma Speed 30mm/sec 2. Turn the platen roller with your finger to clean the entire surface. RESOMiOn 203 DPI X 103 DPI Character ALPHA NUMERIC Character. Extension Character Balcode OnerDimensional UPCA +2l+5, UPCE +2I+5, EANS +2/+5, EAN13 Barcodes +ll+5, EAN 123, Interleaved 1 ol 5, Extended Code 39, Codabar (NW7L Code 118, Code 93. PostNet Two-Dimensional PDF417, Maxitude,Aztec, QR Code (Quick Earcodes Response), Datamatrix Stacked One- 651 Databar (RSS or Composite Code) Dimensional Barcodes Emulation CPCL, MPCL Driver Window CE 4186.0. Window Mobile 5.0 Sensor Black-Mark Upper/Lower. Gap, (over open. Peeler Detect. Peeler SIW, Media-Width Detect Paper paper type Thermal Paper width 56mm thirkness 65ml External Diameter Max. 47 56mm Internal Diameter 12.5mmt05mm Reliability TPH 1DUkm Battery Continuous Printing 54min Standby for “hours Printing length: 249.8M Communications SerialmS-ZZIC). USB Bluetooth Classl, Wireless Lan '802.11hlg Baneiy Charger input ACIOD-Z40V, 50/5 HZ output 8.4V , 800-1 400nm Battery Bmw type Lirinn output 7.4V, 18.9WII Charging time 3.7 Hrs Charging WXDXH(mm) ID4X85X158 WXDXH ' 3.9X3.3X6.Z Primer Commands Compatibility Weight 5809 (Bluemoth,Witi not included) PRINT Environmental seal Ing IP54 FORM JOURNAL Temperature operation 5~40‘C UNITS storage -20~60"C Comments Humidity operation 35 - 80% TEXT Compatibility storage 10-90% TEXT FONT—GROUP(FG) TEXT CONCATENATION MULTILINE(ML) COUNT SETMAG SCALABLE TEXT Linear Bar Codes Compatibility BARCODE BARCODE-TEXT TwoDimensionaI Bar Codes Compatibility PDF417 (PORTABLE DATA FILE) MAXICODE QRCODE DATAMATRIX GS1(RSS) Graphics Compah‘bility BOX Line Print Mode Compatibility LINE SETLP INVERSE-LINE SETLF PATTERN Moving with X andY Coordinaies GRAPHICS LMARGIN PCX SETBOLD Advanced Commands Compaiibility SETSP CONTRAST SpecialASCll Characters TONE SETFF JUSTIFICATION SET-TDF PAG E-WI DTH SETLP-TIMEOUT 000000000 PACE ND-PACE WAIT REWIND TENSION SPEED SETSP ON-OUT-DF-PAPER ON-FEED PREFEED POSTFEED PRESENT-AT COUNTRY/CODE PAGE FORMAT FILES BEEP CUT PATIAL—CUT MCR .XXOOOXOOOXOOXXOOOOOOO FCC Inform ation This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions: (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. This Class [B] digital apparatus complies with Canadian ICESVOOS. Cet appareil numerique de la classe [B] est conforme a la norme NMBVOO3 du Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. NOTE This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Ruies.1hese limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial enVironment. This equipment generates, uses and can radiate radio frequency energy and, if riot installed and used in accordance with the instuctions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: 1.1. Reorient or relocate the receiving antenna, 1.2 increase the separation between the equipment and receiver. 1.3, Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4, Consult the dealer or experienced radio/TV technician for help. AWARNING Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. ACAUTION Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit. The device meets the FCC requirements for radio frequency (RF) radiation exposure in the standard body worn configuration with no minimum configuration. In this configuration, which applies whether the belt clip or shoulder strap is used, the face of the printer from which paper is transported is facing away from the user's body. The standard configuration must always be used when the printer is body worn.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Tagged PDF : No XMP Toolkit : 3.1-701 Producer : Haansoft PDF 1.3.0.410 Creator Tool : Haansoft PDF 1.3.0.410 Create Date : 2012:07:11 19:37:17+09:00 Modify Date : 2012:07:11 19:37:50+09:00 Metadata Date : 2012:07:11 19:37:50+09:00 Format : application/pdf Creator : effect Title : User Manual (LK-P12B).pdf Date : 2012:07:11 19:37:17+09:00 Document ID : 6ED3CD15-9803-4167-885F-837B948D728E Instance ID : uuid:3489f84c-030e-4e17-b1b5-82cce4ef3028 Part : 1 Conformance : B PDF Version : 1.4 Page Count : 14 Page Layout : SinglePage Language : ko-KR Author : effectEXIF Metadata provided by EXIF.tools