Axesstel AI303 ISM 433MHz Remote Keyfob User Manual Axesstel AI303 Remote Keyfob

Download:
Mirror Download [FCC.gov]
Document ID	2258058
Application ID	Ku/GP5tnpVwnVJHQBNv+ew==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.79kB (47419 bits)
Date Submitted	2014-05-05 00:00:00
Date Available	2014-05-05 00:00:00
Creation Date	2014-05-05 17:06:34
Producing Software	GPL Ghostscript 8.70
Document Lastmod	2014-05-05 17:06:34
Document Title	Axesstel AI303 User manual _Remote Keyfob_
Document Creator	PDFCreator Version 1.0.2
Document Author:	lindyli

User manual of ISM-433 Remote Keyfob
Model No.: AI303
The wireless Remote Keyfob are widely used in security alarm system and matched with master unit for usage. The user
can hold the Remote Keyfob by hand. When press the related button, it will send RF signal to the master unit for alarming,
disarming or other function.
Specification：
1. Operating voltage：12VDC
2. Static current ：0µA
3. Operating current ≤15mA
4. Transmitting distance : 60-80m (Out Space)
5.Operating frequency：433.92MHZ+/-0.2MHz
6.Encode IC：EV1527
7. Modulation Mode: ASK
8. Operating Temp：-20℃ ~ +50℃
9. Battery: 12V27A
10. LED: Transmitting indication
Installing Battery in the Remote Keyfob
The Remote Keyfob adopts 1 pc of 12V27A battery for power. Follow these steps to install the battery.
Step 1: Get screws out of the housing cover and move out the housing cover.
Step 2: Take out the battery's insulating piece and install the battery normally. Please pay more attention to the polarity.
Step 3: Replace the cover and fasten the screws.
Notes:
Do not place objects on top of the Remote Keyfob. This can press down keys and reduce battery life and button life.
When the Remote Keyfob’s battery voltage less than 10V or the range decreases significantly, please replace the battery.
Operation:
There are four keys on the Remote Keyfob and marked different symbol (refer to the picture).
Press the related key for the function you want to realize.
Attentions:
a. Dust or humidity may cause the module fall off.
b.
c.
Keep the product dry.
Try not to make the concrete wall or electrical equipments between the Remote Keyfob and the receiver (alarm panel)
in order to prevent the signal being cut off.
FCC STATEMENT
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed an used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turing the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operations is subject to the following two condictions:
1)
This device may not cause harmful interference and
2)
This device must accept any interference received, including interference that may cause undesired operation.
---------------------------------------- END ----------------------------------

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : 140647e8-d690-11e3-0000-99dd41343624
Producer                        : GPL Ghostscript 8.70
Keywords                        : ()
Modify Date                     : 2014:05:05 17:06:34+08:00
Create Date                     : 2014:05:05 17:06:34+08:00
Creator Tool                    : \376\377\000P\000D\000F\000C\000r\000e\000a\000t\000o\000r\000 \000V\000e\000r\000s\000i\000o\000n\000 \0001\000.\0000\000.\0002
Document ID                     : 140647e8-d690-11e3-0000-99dd41343624
Format                          : application/pdf
Title                           : \376\377\000A\000x\000e\000s\000s\000t\000e\000l\000 \000A\000I\0003\0000\0003\000 \000 \000U\000s\000e\000r\000 \000m\000a\000n\000u\000a\000l\000 \000_\000R\000e\000m\000o\000t\000e\000 \000K\000e\000y\000f\000o\000b\000_
Creator                         : \376\377\000l\000i\000n\000d\000y\000l\000i
Description                     : ()
Author                          : lindyli
Subject                         : 

EXIF Metadata provided by EXIF.tools