Axesstel AXWL1900 Fixed WLL Phone (PCS CDMA) User Manual PH7AXWL1900 USM 12192005 0340071

Axesstel Inc Fixed WLL Phone (PCS CDMA) PH7AXWL1900 USM 12192005 0340071

Users Manual 2

Download: Axesstel AXWL1900 Fixed WLL Phone (PCS CDMA) User Manual PH7AXWL1900 USM 12192005 0340071
Mirror Download [FCC.gov]Axesstel AXWL1900 Fixed WLL Phone (PCS CDMA) User Manual PH7AXWL1900 USM 12192005 0340071
Document ID615550
Application IDC0gkANFOWpomUsPl5MK6cw==
Document DescriptionUsers Manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize182.93kB (2286566 bits)
Date Submitted2005-12-27 00:00:00
Date Available2005-12-27 00:00:00
Creation Date2005-12-27 17:24:57
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2005-12-27 17:25:03
Document TitlePH7AXWL1900_USM_12192005_0340071.pdf
Document CreatorPScript5.dll Version 5.2
Document Author: Courtenay

Basic Operation
Making Calls
Redial
Receiving Calls
Adjusting Volume
Choosing the Ring Tones
Message Service
SMS Services
Wire/m lem'
WAKING CALLS
. Make sure your phone is turned on
2. Plck up the handset to hear a diai tone
When the phone tails to acquire servlce signal, you wili PLEASE
hear "N0 Sen/Ice" lune (intermitlent tone) D|AL
3 Dial the number to call The LCD window dispiays
the number m“ fillii (
4. Wait for a moment for auto caiiing or press O .
. When the other person answers, begin conversation
a. To end the caii. replace the handset on the main unit.
CALLING....
02255558282
NOTE1: Modifying a phone numberwhile diaiing.
- To erase me iest digit entered: Press "W
- To erase me entire number: Press 6 and hoid
NOTEZ: Automatic cailing
The phone is set to piaoes a caii automaticaiiy 4-10 seconds after last digit
entry from the lactory To disable automatic calling or change the deiay time.
1. Press O (B.
2. Press 41) to seiect '0FF'. then press “6 to save
enoe automatic caning is disebied, you have to dial the number and press
(5 to place a oaii
Wire/en I’Imm'
EEDlAL
Redial the last number you dialed.
1. Pick up the handset or press .
2. Press O‘ .
NOTE : You may not redial when there is no last number dialed stored
in the memory. “NO LAST CALL!" message is displayed on the LCD
EECEIVING CALLS
When there is an incoming call, the phone rings and blinks
"Incoming Call" message on the display.
1 Simply pick up the handset er press.to answer the M r
call.
2. Te disconnect, replace the handset or press .. INCOMING CALL
123-456-7890
NOTE: When the ringer volume is set (0 Silent" the
phone does not ring Only the "incoming Call"
message blinks.
When the Caller ID service is activated.
caller ID Display
The Caller lD feature displays the caller‘s numberwhen the
“i"
phone receives a call. lithe callers name and number are
stored tegether in the phene book, the caller's name is INCOMING CALL
displayed Contact your sewice provider to activate this AMlT
team re
ml
NOTE: lithe call is not answered. the phone displays the
"Missed Call" message with the call arrival date and MlSSED 1 CALL
time THU 10/09 2:56P
a X e S S 't e | AXW-Luoo
Wirt‘lmx I’Imm'
DJUSTING VOLUMES
You can control the sound volumes including the key tone, earpiece,
speaker and the ringer
d Adjusting key tone volume m”
Press O repeatedly unlll lt reacnes propervolume.
KEV VOLUME
6 Adjusting external speaker volume In”
P tdld'hdl tht
ressO repeae y urlng an s ree ca 0a lus SPEAKER VOLUME
external speaker volume
d Adjusting earpiece volume In” (-
PlCK up the nanuset and press 0 repeatedly durlng EARPIECE VOLUME
a phone call to adjust earpiece velume
d Adjusting ring volume
‘l Press 0
2 Press E],@ to adjust rlngervelume.
3 Press 0 to save
Illll
RING VOLUME
NOTE: It 'Si|ent' is selected, tne pnene does not rlrlg
when an incoming call comes ln. Only lne
"INCOMING CALL" message blinks on the
display
HOOSING THE RING TONES
You can choose from twelve different ring tones.
Illll
2. Press 0‘ (erg. Ho select ring type RING SELECT
3. Press 6 to save V TONE fl
AXW-L800 axess-tel
Wire/en Plume
MESSAGE SERVICE
Message Service is network dependent teature and is available only when your
service provider supports it. Check your service provider is providing message
service belore using this function.
In”
0] Sending New Text Messages 1: NEW MESSAGE
1 Press Q“ Press New Message) 2: INBoX
2 Write message using tne keypad. Toggle between uppercase,
lowercase. and nurnenc by pressing “6“ button. m”
3 Press 5655. PHONE NUMBER
1237
NOTE: See page 18 lbr more information on text edit.
4 Enter destinatibn number and press “m
5 Once the destination number has been entered, the message
. HELLO
le be sent —
NOTE: To change defaull message uplluns, access Message
Options menu In”
SENDING...
PLEASE WAIT...
0] Sending Saved Text Messages
1. Pressmé“,@(5aved MSG)
2 Select message to resend wllh Q‘ (or@.@) and
press 0
3 To send tne message again. press Q
To edit the message press 0
axess-tel AXW-Le’llll
W7/(‘h’ Phnnc
6 Received Text Message
‘I. When lext message arrlves,'MESSAGEI1O/1Z 4 04 PM‘
nenly and g appears In the Icon line
lNBox I
E) to select message you want
In see and press 0“
4. The message. amval time and caII back number (rl
avallabIe) display if the message Is long, it will be
scrolled down in 3 seconds aulumallcaIIy
To scrcII up and down manually, press 0' (or@,@)
5 If the message contains caII back number and you want to
make a caII to that number
Press 6‘ ilyau wanl to caII back
NOTE: If the caII back number is stored in me phunebpek
with a name. the name will display instead ollhe
phone number
6 To Forward the recall/ed Text Message to another number,
press 0. W
7. To wrlle a repIy la sender. press
6 Delete Selected Text Message
‘I. Press O , [EMERAGE MSG ).
2. Press 5 (er@,@) to select message you want
Io deIeIe and press
3. Press O again
4. Select 'YES‘ wrth
(or®.®) and press 5 .
01 Retrieving Voice Messages
I.When voice messages arrive, "VOICE MSG
10/12 4 04 PM“ shortly appears and E appears
in the iCDI’I line
2. Press “6“,@ (Voice MSG) or press 0 to View
message directly
3 Press "5 lo dlaI Voice mall service cenler
MI E
MESSAGE!
10I12 4:04 P
IllII E
1: NEW MESSAGE
2: INBOX
MI E
> 1: SUNNY
2: 022255558282
IllII B
10/12 4 ' 04 PM
FROM 1022255558252
WI
ERASE MSG?
> VES
‘flllll
THE MESSAGE
IS ERASED
‘fillll E
VOICE MSG
10/12 4:05A
WI
3: SMS SERVICES V
4: VOICE MSG
AXW-Lfllm
axess-tel
Wire/m I’lmm'
d Erasing All Messages
1 Press 0 Erase MSG) Illll
2. SelecI‘YES wlth (“j (cr II?)- ERASE ALL?
3. Press 0 . > YES
01 SeningIReIeasing Message Alert
1. Pressqu. (MSG Opllon), MSG Alerl). “I“
2. Selecl ‘ON' or 'OFF‘ Wlth O‘ (or @,@)
3. Press 0
While the message alefl is set. the phone will alerl the
MESSAGE ALERT
> ON
userwhen messages arrlve.
Saving Sent Message
1 Press O .-(MSG Oplie ),@(5ave Sent MSG)
2 Seleel“0N"ur'OPP‘Wlln(j (or E1)
3. Press O
Whlle lrns opllen ls turned on, omgolnq new messages wlll be aulomalleally
saved Retrleve Ihe saved messages by accesslng Saved Message Menu.
Setting Message Priurity Type
Press O ..(MSG Opllon) mes Prlollly)
Select “NORMAL" or “URGENT with Q (or [3 , (3).
Press 0 .
Sem 5 Message Aule Delete
Press O .(MSG Option), Eleule Delele).
Select”ON or“OFF“wlth O‘ (er@,@).
Press N“
When Aulo Delele ls enabled, Ihe phone wlll aulamalically delete oldesl
received messages m INEOX m case or lull memory
1.
2.
3.
‘6.
2.
3.
axess-tel ammo
Phonebook
Internal Phonebook
Storing Number in Memory
Searching For An Entry in Phonebook
Erasing An Entry in Phonebook
Erasing All Entries in Phonebook
One-touch Dialing
Two-touch Dialing
Wirt'lmw Plume
“NTERNAL PHONE BOOK
Your phone has an internal "Phone Book" in which you can store
up to 99 frequently used names and numbers.
ETORING IN THE PHONEBOOK
WP'ESSO‘Q' MI W
2 Enter the name by pressing the alphanumerrc keypad
and pressan 0" afler completed. NAME ?
NOTE1: If you do not want to enter a name, yust press —
‘ "‘ here The number wlII be saved as
We Name“ ‘flrlll mm D]
NOTEZ: Name entry is limited (0 maxlmlml 0716 letters PHONE NUMBER
How to Enter & Edlt TEXTS
You can enter letters using the alphanumeric Keypad
Each button has 3 to 4 letters assigned. Each stroke on
the button scrolls the assigned alphabet letters and the
numeric value. Stop pressing when the letter you want
appears You can switch between uppercase. lowercase
and numeric characters by pressrng b
To enter special characters. pres repeatedly.
For space, press® To go back, press Q.
Asingle stoke on 2) will erase the last letter rh Ilne
3 Enlerthe telephone numberand press 0 . W m
Up to 32 drgrts can be saved.
4 An empty locatrpn drsplays automatrpally Press ‘O
to save the number m the locatren
MEMORY LOCATION
SPEED DIAL : [01]
5 T0 assign a drfferent lucatrpn, enter 2 drgrt lucatron number
and press 0
axess-tel AXW-st
.i Phtmt'
NOTE: llyoii select the location in which a number
has already been stored. "OVERWRITE’!" wili be
displayed. Press “O” to overwrite or press 8
to go back to automatic location.
a "CONFIDENTIAL?" will be displayed. Press ”mo“ it no
secret teature is necessary To store trie number in
secret, select ‘YES' by pressing 5 (or@
press 0
NOTE: Secretly saved number will not be displayed unless
ttie lock code is entered One or two touchadiallng
secretly saved number will prompt iock code entry.
“ii” CD
OVEHWRITE ?
D1 : SUNNY
Illli ID
CONFIDENTIAL ?
NO
EEARCHING FOR AN ENTRY IN PHONEBOOK
You can Search information stored in the phone book in several ways
and make a call directly from the phonebook.
d Searching by Name
‘i Press (Pnonebook).
2 Enler all or part of ttie name and press 0
Example) EnterA and press 6 to find all names tnat
start With A.
3 Ttie pnone displays the memory location numbers along
Witn ttie name oltne first match.
NOTE: "NO NAME MATCHES" appears wtien ttiere is no
name matching with your entry
4 Press ‘d tor@,@)to searcn fortne name you're
looking tar and press O to display the number
NOTE: "ENTER LOCK coma" appears wtien you try to
access secrelly saved number. Enter lock code
and press “55
5 Press 6 to dial the number displayed to make a call
AX W-LUflfl
Illli CU
NAME 7
ml” CD
> 01 : SUNNV
05 :VISHAL
“ii” CD
LATA
02255558282
ml” CD
ENTER LOCK CODE
mlIi f
CALLING...
02255558282
axess-tel

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Modify Date                     : 2005:12:27 17:25:03-05:00
Create Date                     : 2005:12:27 17:24:57-05:00
Metadata Date                   : 2005:12:27 17:25:03-05:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : PH7AXWL1900_USM_12192005_0340071.pdf
Creator                         : Courtenay
Document ID                     : uuid:3574b6ad-3b72-4311-911b-a058e0a805f7
Instance ID                     : uuid:ed061c50-7574-4f0b-a5a0-2a480a0f6a8e
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Page Count                      : 10
Author                          : Courtenay
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PH7AXWL1900

Navigation menu