Axesstel PX330 Fixed WLL Telephone (PCS CDMA) User Manual PX300 Manual v1 0 Eng

Axesstel Inc Fixed WLL Telephone (PCS CDMA) PX300 Manual v1 0 Eng

Users Manual

 1
 2 INTRODUCTION      The Fixed Wireless phone operates through a wireless connection instead of a landline     phone cable, enabling the subscriber to set up the phone anywhere wireless service     is available.       Axesstel CDMA 2000 Fixed Wireless Phone provides high quality and     superior performance with many features such as excellent voice quality, packet data     service, speaker phone, world clock, calculator, short message service, etc.     A large 3-line liquid crystal display provides a user-friendly interface for quick and easy-to-understand information display.               FEATURES                1.  Speaker Phone with Hands-Free Dialing        2.  Signal Strength Indicator         3.  Redial         4.  Volume Control         5.  Rubber Keypad with Backlit        6.  Battery Power Backup         7.  Graphic LCD Screen with Backlit        8.  Speed Dialing 9.  Automatic Sending         10. Phonebook         11. Short Message Service 12. World Clock and Calculator 13. Data Call Service with Speed up to 153kbps 14. Fax service (PC fax)
 3   TABLES OF CONTENTS                                                                                 Advanced Features Safety Precautions………………………                Changing Greeting Message………..  Checking the Parts  ………………………              System Reset ………………………...  Setting up Your Phone  ……….………..                Restricting Use of the Phone ……….  Getting to Know Your Phone  ……….…                Locking / Unlocking the Phone ……..  Display Icons …………………………….                Changing the Lock Code……………   Function Keys…………………………...                 World Clock …………………………                    Calculator…………………………… Basic Operation                        Making Calls ....…………………………               Optional Features Redial…………………………………….               Call Forwarding ……………………....  Receiving Calls …………………………               Call Waiting ………………………….. Adjusting Volumes ……………………..               Three-Way Calling…………………… Choosing the Ring Tone ………………               Data Call Service……………………… Message Service  ..…………………….                FM Radio(Optional) …………………….              Miscellaneous Menu Table  …………………………… Phone Book                                                       Specification  ………………………….. Internal Phone Book……………………  Storing in phonebook ………………….  Searching for Entries in Phonebook….  Erasing an Entry in Phonebook ….…..  Erasing All Entries in Phonebook ....…  One-Touch Dialing ………………….… Two-Touch Dialing ………………….…   Useful Features Call History..........................................  Displaying Your Phone Number..........  Setting up Your LCD…………….……. Mute……………………………….…….  Selecting Time Mode………………….  Setting the Alarm………………………  Checking and Clearing Call Times…..  Setting Warning Alerts………………...         4568910  12121314141518  20202123232424  262727282828293032 32 33 33 34 34 34   36 36 36 36   38 39
 4   SAFETY PRECAUTIONS       1. Avoid placing the phone in a dusty location, or near a source of gas or fire.    2. Don't Shake, hit or drop the phone.    3. To clean the outside of the phone, use only a soft, dry cloth. The chemicals           in alcohol, benzene or acetone can damage the surface of the phone.     4. Do not twist or pull the cord out of the phone.     5. Do not disassemble the phone.     6. Do NOT use the power adapter if:          - The power cord is damaged.          - The phone has been dropped or damaged in any way.     7. Use only the AXESSTEL provided adapter for the phone. Do not use the AXESSTEL adapter for any other purpose.     8. Use only the AXESSTEL provided antenna. Do not use the antenna for any            other purpose.     9. Frequency and length of use can affect the life of the self-charging battery.         Contact your customer service if the battery is not operating properly.     10. Use only the designated self-charging battery. Dispose of exhausted batteries           properly. Never discard a battery in or near fire or flame.     11. Do not place the telephone near water, for example, near a bathtub, sink, wet           basement, or swimming pool.       NOTE 1: The input and output voltages are indicated on the adapter.                    (Input: AC 100~240V, 50~60 Hz, Output: DC 5.5V, 1A)
 5   CHECKING THE PARTS      Once you have unpacked your phone, make sure that you have all the parts shown      below. If any piece is missing or broken, please call your customer service.        1. Main Unit                                                     4. User Manual     2. Handset                                                       5. Antenna     3. Power Adapter                                            6. Battery     7. Data cable (USB - optional)      *USB cable is optional
 6   SETTING UP YOUR PHONE                       Installing the phone            This phone operates by receiving DC power from the AXESSTEL power adapter            that connects to an electrical outlet. The phone is equipped with a rechargeable            battery as a back up in case of an AC power failure.             Desktop installation        Connect the antenna   Attach the handsetON/OFF power switch is located  on the bottom side of the phone.      Please turn on the power switch to   "ON" for operation And Press and Hold Power key  on the front side of the phone. Plug the Power adapter into anappropriate Wall outlet Open the battery cover and  connect the battery
 7  SETTING UP YOUR PHONE            Service Status Check            Display in the Service Area           When the power cord is connected properly,                     all segments of the LCD window will turn on briefly.           The number of bars of signal strength indicator                                  (antenna icon) indicates the strength of service signal           of the area. The display will show the greeting with date           and time.           You can change the greeting. (See page 31)               Display in area with no service            When there is no service signal detected in your area,            no antenna bar appears. Contact your service provider            for the coverage area information.                                            Also check if the antenna is connected        AXESSTEL THU 10/09 5:24PAXESSTEL
 8  GETTING TO KNOW YOUR PHONE  1. Antenna: Adjusting the position of antenna improves the sound quality of the call.  2. Menu/FM: Press to access the phone's menus.                       Press and hold the key for a few seconds to start FM Radio.                       (FM is optional. PX310F/PX320F/PX330F only)                        3. Message: Press to retrieve messages.  4. Volume Key(-, +): Let you adjust sound levels and scroll through the menu options  and displays.  5. OK: Stores phone numbers, and any settings you select in the menu within the             phone's memory  6. Clear: Lets you clear your last entry.   7. Redial: Allows you to redial the last number  8. Power On/Off: Press and hold the key for a few seconds to turn on or off your phone 9. Speaker Phone: Turn on or off the speaker phone feature
 9  DISPLAY ICONS  Icons display on the screen to indicate what features you are using, e.g. signal strength, battery status and etc...                                           Indicate the strength of the signal. More bars indicates                                 stronger signal.    Indicates that a voice or data call is in progress.                                     Indicates that you are using the phone's menu.                                     Indicates that the alarm has been set.                                     Indicates that you are in the Phonebook menu.                                     Indicates that you have text message or a voice mail message.         Indicates the level of battery power. The more bars, the                                 more power. When the battery is low, the icon blinks,                                 and an alert tone sounds. AXESSTEL THU 10/09 5:24P
 10  FUNCTION KEYS       Press this key to retrieve messages.    Press this key to display the phone's main menu.                                  Press and Hold this key to turn on or off the FM radio.  If there is an incoming call or if the user attempts to make  an outgoing call while the FM radio is on, the FM radio turns off  automatically                                   Press this key to control the volume of keypad, earpiece                                  and speaker. In the menu mode, use this key to scroll through                                  the menu items.                                    Clears information from display screen.                                  - To erase one character from the display screen, press it once.                                  - To erase all characters on the screen, press and hold.                                  - To go back one step in the menu mode, press it once    Press this key to store a phone number in the phone book or to save                                  menu settings.     The Speaker button is used to place or receive a call without                                  using the handset. The integrated microphone and speaker on the                                  Main unit allows hands free conversation.    Press and hold this key for a few seconds to turn on or off your phone                                       Press this key to redial the last number called or to connect a                                  call right after dialing the number without waiting until the call                                  is connected automatically.
 11                              Basic Operation   Making Calls Redial Receiving Calls Adjusting Volumes Choosing the Ring Tones Message Service FM Radio(Optional)
 12  MAKING CALLS  1. Make sure your phone is turned on. 2. Pick up the handset to hear a dial tone.            When the phone fails to acquire service signal, you will  hear "No Service" tone (intermittent tone). 3. Dial the number to call. The LCD window displays   the number. 4. Wait for a moment for auto calling or press <REDIAL>. 5. When the other person answers, begin conversation. 6. To end the call, replace the handset on the main unit. NOTE1: Modifying a phone number while dialing. - To erase the last digit entered: Press <CLEAR>. - To erase the entire number: Press <CLEAR> and hold. - To input symbol “+” : Press <0> and hold NOTE2: Automatic calling               The phone was programmed to place a call automatically 4~10 seconds after last digit entry. To disable automatic calling or change the delay time.               1. Press <MENU> , <0> , <1>.               2. Press <VOLUME KEY>(or <*>, <#>) to select different time or 'OFF',  then press <OK> to save.  Once automatic calling is disabled, you have to  dial the number and press <REDIAL> to place a call.       REDIAL       Redial the last number you dialed.      1. Pick up the handset or press <SPEAKER>.    2. Press <REDIAL>.    NOTE: You may not redial when there is no last number dialed stored                 in the memory. "NO LAST CALL!" message is displayed on the LCD.           CALLING....  02255558282PLEASE DIAL
 13   RECEIVING CALLS      When there is an incoming call, the phone rings blinks     "Incoming Call" message on the display.     1. Simply pick up the handset or press <SPEAKER> to answer  the call.    2. To disconnect, replace the handset or press <SPEAKER>.    NOTE: When the ringer volume is set to 'Silent', the  phone does not ring. Only the "Incoming Call“   message blinks.   When the Caller ID service is activated.    Call ID Display    The Caller ID feature displays the caller's number when the  phone receives a call. If the caller's name and number are  linked together in the phone book, the caller's name is     displayed. Contact your service provider to activate this  feature.    NOTE: If the call is not answered, the phone displays the    “Missed Call" message with the call arrival date and   time.                        INCOMING CALL 123-456-7890INCOMING CALLAMIT MISSED   1CALL THU 10/09 2:56P
 14   ADJUSTING VOLUMES  You can control the sound volumes including the key tone, Earpiece, speaker and the ringer  Adjusting key tone volume    Press <VOLUME KEY> repeatedly until it reaches proper volume.  Adjusting external speaker volume Press <VOLUME KEY> repeatedly during hands free call to  adjust external speaker volume.  Adjusting earpiece volume    Pick up the handset and press <VOLUME KEY> repeatedly  during a phone call to adjust earpiece volume.  Adjusting ring volume    1. Press <MENU> , <5> , <3>.    2. Press <VOLUME KEY>(or <*> , <#>) to adjust ringer volume.    3. Press <OK> to save.    NOTE: If 'Silent' is selected, the phone does not ring  when an incoming call comes in. Only the "INCOMING CALL" message blinks on the display.    CHOOSING THE RING TONES  You can choose from twenty different ring tones.     1. Press  <MENU> , <5> , <2>.    2. Press <VOLUME KEY> (or  <*>, <#> ) to select ring type.    3. Press  <OK>  to save.KEY VOLUMESPEAKER VOLUME EARPIECE VOLUME RING VOLUMERING TONE▶ TONE # 1
 15    MESSAGE SERVICE  Message service is a network dependent feature and is available only when your service provider supports it.  Check with your service provider to ensure it is providing message service before using this function. Message memory is available up to 20 INBOX, 10 SAVED MSG, 10 DRAFT MSG.   Sending New Text Messages    1. Press  <MESSAGE> . Press  <1>(New Message).    2. Write message using the keypad. Toggle between uppercase,  Lowercase, and numeric by pressing  <MESSAGE> button.    3. Press <OK>. Press <2> (Send).    4. Enter destination number and press <OK>.    5. Once the destination number has been entered, the message  will be sent.    NOTE: To change default message options, access Message  option menu.      Sending Saved Text Messages    1. Press <MESSAGE> , <5>(Saved MSG).    2. Select message to resend with <VOLUME KEY> (or <*>, <#>)  and  press <OK>.    3. To edit the message press <MESSAGE>.   Sending New Text Messages using Templates 1. Press <MESSAGE>. Press <4> (Templates). 2. Press <VOLUME KEY>(or  <*>, <#>) to view and select the desired template. 3. Press <OK> to insert that template into the message body. 4.  Continue to type in the rest of the message. 5. Press <OK>. Press <2> (Send). 6.  Enter destination number and press <OK>.           1: NEW MESSAGE 2: INBOXPHONE NUMBER123_ HELLO_SENDING... PLEASE WAIT...
 16MESSAGE! 10/12 4:04 P1: NEW MESSAGE 2: INBOX ▶ 1: SUNNY      2: 012345678910/12  4 : 04 PM FROM:0123456789 ERASE MSG?        ▶          YESTHE MESSAGE IS ERASED VOICE MSG 10/12 4:05A3: VOICE MSG    ▼ 4: TEMPLATES    Received Text Message    1. When text message arrives, e.g. 'MESSAGE! 10/12 4:04PM'  displays shortly and appears in the icon line.    2. Press  <MESSAGE> ,<2>(Inbox).    3. Press <VOLUME KEY> (or <*>, <#>) to select message you  want to see and  press <OK>.    4. The message, arrival time and call back number (if available) Is displayed. If the message is long, it will be scrolled down  in 3 seconds automatically.        To scroll up and down manually,  press <VOLUME KEY> (or <*>, <#>).    5. If the message contains call back number and you want to  make a call to that number.        press  <REDIAL> if you want to call back.    NOTE: If the call back number is stored in the phonebook  with a name, the name will display instead of the  phone number.    6. To forward the received message to another number,  press  <MENU>.    7. To write a reply to the sender, press <MESSAGE>.     Delete Text Message    1. After reading the <MESSAGE>, Press <VOLUME KEY>  to erase the message.    2. Press <OK> to confirm erase.        Retrieving Voice Messages    1. When voice messages arrive, e.g. "VOICE MSG“  10/12 4:04 PM" shortly appears and <SMS ICON> appears  in the icon line.    2. Press  <MESSAGE> ,<3>(Voice MSG) or press <OK>  to view  message directly.    3. Press  <REDIAL> to dial voice mail service center.
 17ERASE ALL?        ▶          YESMESSAGE ALERT ▶                      ON   Erasing All Messages    1. Press  <MESSAGE> ,  <7>(Erase MSG).    2. Select  'YES' with <VOLUME KEY> (or <*>, <#>).    3. Press  <OK>.  Setting/Releasing Message Alert    1. Press  <MESSAGE>,  <8>(MSG Option),  <1>(MSG Alert).    2. Select ON or OFF with <VOLUME KEY>(or <*>, <#>).    3. Press <OK>.    NOTE: While the message alert is set, the phone will alert                 user when messages arrive.  Saving Sent Message    1. Press   <MESSAGE>, <8> (MSG Option),  <5> (Save Sent MSG).     2. Select  "ON" or "OFF" with <VOLUME KEY> (or <*>, <#>).    3. Press <OK>.        While this option is turned on, outgoing new messages will be automatically         saved. Retrieve the saved messages by accessing Saved Message Menu.  Setting Message Priority Type    1. Press  <MESSAGE> , <8> (MSG Option),  <4> (MSG Priority).    2. Select  "NORMAL" or "URGENT”  with <VOLUME KEY> (or <*>, <#>).    3. Press  <OK>.  Setting Message Auto Delete    1. Press  <MESSAGE> , <8> (MSG Option),  <6> (Auto Delete).    2. Select  "ON" or "OFF“ with <VOLUME KEY> (or <*>, <#>).    3. Press  <OK>.        When Auto Delete is enabled, the phone will automatically delete oldest received        messages in INBOX in case of full memory.
 18  FM Radio (Optional, PX310F/PX320F/PX330F only)  Using FM Radio     1. Press and hold <MENU/FM> to turn on the Radio. 2. Entering Radio Mode, Preset Channel and Frequency     display      on the screen.     3. Press <*> or <#> lightly to move the preset channel.     4. Press<VOLUME KEY> to change the volume.     5. To stop FM Radio, Press <CLEAR>. NOTE 1: If the phone FM radio is  ON  and  you lift the phone handset or there is an  incoming call, the FM Radio stops automatically, switching to the phone mode. Also pressing <SPEAKER> to use Speaker phone stops the FM Radio. NOTE 2: Power cord acts as FM Radio Antenna. For best reception, plug in the power              cord to the phone while listening to FM Radio.  PROGRAMMING and USING PRESET   10 programmable presets are available.    1. Press<MENU/FM> to toggle between normal and preset modes.     2. In ”Preset Mode”  the preset channel number and frequency appear.    3. In “Preset Mode”, press <*> or <#> to change from one preset channel to another 4. In “Normal Mode”, only the channel frequency appears.  Press<*> or <#> to increase or decrease the frequency. Press and hold <*> or <#> to scan the next channel frequency.   5. In “Normal Mode”, press and hold Number key to store the radio channel  at the Number position.  Auto Preset Press <REDIAL> button for automatic scan of available stations. Once the scan is Performed, the phone will automatically store detected stations to 10 presets.                Ch  0       107.1 MHz                107.1 MHz
 19                               Phonebook  Internal phonebook Storing in phonebook Searching for Entries in Phonebook Erasing an Entry in Phonebook Erasing all Entries in Phonebook One-Touch Dialing Two-Touch Dialing
 20NAME ? _PHONE NUMBER ? _ MEMORY LOCATION SPEED DIAL : [01]OVERWRITE ? 01 : SUNNY CONFIDENTIAL ?                        NO   INTERNAL PHONEBOOK  Your phone has an internal "Phonebook" in which you can store up to 150 frequently used names and numbers.    STORING IN PHONEBOOK     1. Press <MENU>, <1>.    2. Enter the name by pressing the alphanumeric keypad   and pressing <OK> after completed.    NOTE1: If you do not want to enter a name. just press  <OK> here. The number will be saved as  "No Name".     NOTE2: Name entry is limited to maximum of 16 letters.     How to Enter &Edit Texts    You can enter letters using the alphanumeric keypad.    Each button has 3 to 4 letters assigned. Each stroke on the button scrolls the assigned     alphabet letters and the numeric value. Stop pressing when the letter you want appears.    You can switch between uppercase, lowercase, and numeric characters by pressing    <MESSAGE>.   To enter special characters. Press <1> repeatedly.   For space, press <#>. To go back, press <*>.   A single stoke on <CLEAR> will erase the last letter in line.  3. Enter the telephone number and press <OK>.        Up to 32 digits can be saved.    4. An empty location displays automatically.  Press <OK> to save the number in the location.    5. To assign a different location, enter 2 digit location number and press <OK>.    NOTE:  If you select the location in which a number   has already been stored, “OVERWRITE?” will be  displayed. Press <OK> to overwrite or press                 to go back to automatic location. 6. “CONFIDENTIAL?” will be displays. Press <OK>  if no secret feature is necessary. To store the number in  secret, select ’YES’ by pressing  <VOLUME KEY> (or <*>, <#>) and press <OK> .    NOTE: Secretly saved number will not be displayed unless   the lock code is entered. One or two touch-dialing  secretly saved number will prompt lock code entry.
 21NAME ? _▶ 01 : LATA 02 : VISHAL LATA         022255558282ENTER LOCK CODE _ _ _ _   SEARCHING FOR ENTRIES IN PHONEBOOK  You can search information stored in the phone book in various way and make a call directly from the phonebook.  Searching by Name    1. Press <MENU>, <1>(Phone book), <1> (Search),  <1> (Name).        2. Enter all or part of the name and press <OK>.    Example) Enter A and press <OK> to find all names         3. The phone displays the memory location numbers along        with the name of the first match.     NOTE: “NO NAME MATCHES” appears when there is no  name matching with your entry.   4. Press <VOLUME KEY> (or <*>, <#>) to search for the name  you’re looking for and press <OK> to display the  number.     NOTE: “ENTER LOCK CODE” appears when you try to  Access secretly saved number. Enter lock code and press <OK>.   5. Press <REDIAL> to dial the number displayed to make  a call.            CALLING....  02255558282
 22PHONE NUMBER ?_ LOOK UP LOCATION         ?? Searching by Phone Number    1. Press <MENU> (Phone book), <1>(Search),  <2>(Number).    2. Enter all or part of the number you remember and  press <OK>.    3. The phone displays the memory location and names  which contain your entry. NOTE: “NO NAME MATCHES” appears when there is no number  matching your entry.    4. Press <VOLUME KEY> (or <*>, <#>) to search for the name  you’re looking for and  press <OK> to display the number.    NOTE: “ENTER LOCK CODE” appears when you try to                 access secretly saved number. Enter lock code and press <OK>.    5. Press <REDIAL> to dial the number displayed.  Searching by Memory Location    1. Press <MENU> , <1> (Phonebook), <1> (Search),  <3> (Location)    2. Enter the three-digit memory location. The phone  displays the information of the memory location.    NOTE: “INVALID LOCATION!” displays when you enter  location number that is empty.    3. Press <OK> to display the number.    NOTE: “ENTER LOCK CODE” appears when you try to   access secretly saved number. Enter lock code and press <OK> .    4. Press <REDIAL> to dial the number displayed.
 23NAME ? _▶ 01 : AMIT 03 : SUNNY AMIT           02255558282ERASE?       #01 02255558282ENTER LOCK CODE _ _ _ _   ERASING AN ENTRY IN PHONEBOOK  To Erase a Specific Number    1. Press <MENU>, <1> (Phonebook) and <3> (Erase).    2. Press one of search options, <1> (Name),  <2> (Number) or <3> (Location).    3. Enter name, address, or phone number according to  search option.    4. Select an item to erase by pressing <VOLUME KEY>  (or  <*>, <#>)   and pressing  <OK>.    NOTE: “ENTER LOCK CODE” appears when you try to   access a secretly saved number.                 Enter the lock code and press <OK>.     5. Press <OK>. again to erase.    6. Press <OK>. again to confirm.        To cancel, press <CLEAR>.           ERASING ALL ENTRIES IN PHONEBOOK  To Erase All Numbers in Phonebook    1. Press <MENU>, <8> (Security)    2. Enter lock code.    NOTE: Lock code is set as 0000 from the factory.  To change lock code see page 33.    3. Press <7>(Erase Names).    4. Press <OK> to confirm.         - ERASED - ERASE ALL NAMES  YES
 24MEMORY 1 AMIT MEMORY 23 AMIT    ONE-TOUCH DIALING  Memory locations 01 ~ 09 are special one-touch dialing locations. You can dial the numbers stored in 01~09 by pressing just one key.    1. Pick up the handset or press <SPEAKER>.    2. Press and hold the number of the location (1~9)  containing the number to be called for a moment.    3. The name and the phone number will appear and the phone dials the number automatically.    NOTE: Location 1 may be preprogrammed as emergency  number or voice mail. Please check with your  service provider.   TWO-TOUCH DIALING  Memory locations 10 ~ 99 are two-touch dialing locations. You can dial the numbers stored in 10~99 by pressing the first digit and pressing and holding the second digit.    1. Pick up the handset or press <SPEAKER>.    2. Briefly press the first digit of the memory location  number, then press the second digit and hold it down  for a moment.    Example) To dial location 23, briefly press the <2>,  Then press <3> and hold for a moment.    3. The phone number stored displays and dials    automatically.    NOTE1: When you try one-touch or two-touch dialing  for the number secretly saved, the phone will  prompt for Lock code entry.  Enter the lock code to make a call.    NOTE2: “EMPTY LOCATION” displays when you try one-touch or two-touch dialing with                   empty location number.  CALLING....  02255558282CALLING....  02255558282
 25                              Useful Features  Call History Displaying Your phone Number Setting up Your LCD Mute Selecting Time Mode Setting Time Mode Checking and Clearing Call Times Setting Warning Alerts
 261 : MISSED CALL 2 : INCOMING ▶ 01 : AMIT 02 : SUNNY FRI  10/09   9: 45P AMIT CALLING.... 02255558282  CALL HISTORY  Your phone stores the last 100 outgoing calls, 100 incoming calls, and 100 missed calls combined (only when Caller ID function is activated). You can display and redial these numbers.  Redialing Outgoing Calls 1. Press <MENU>, <3> (Call History), <3> (Outgoing) NOTE: If there’s no outgoing call history. “OUTGOING CALL MEMORY EMPTY!” displays. 2. Press <VOLUME KEY>(or <*>, <#>) to select number  to redial. 3. Press <REDIAL> to redial the number. NOTE1: Press <OK> to see time and date of the call  made. Then press <REDIAL> to redial the number  or press <OK> again to save the number in memory NOTE2: To redial the last number called. Just pick up the  handset and press <REDIAL>.  Redialing Incoming Calls 1. Press <MENU>, <3> (Call History), <2> (Incoming). NOTE: If there’s no incoming call record.              “INCOMING CALL MEMORY EMPTY!” displays. 2. Press <VOLUME KEY> or <*>, <#> to select number to  redial. 3. Press <REDIAL> to redial the number. NOTE1: Press <OK> to see time and date of the call arrival.  Then press <REDIAL> to redial the number or press  <OK> again to save the number in memory. NOTE2: Incoming history is available only when caller ID is activated.  Redialing missed Calls  To display a list of missed received calls. 1. Press <MENU>, <3> (Call History), <1>(Missed Call). NOTE: If there’s no missed call record, ‘MISSED CALL MEMORY EMPTY!” displays. 2. Press <VOLUME KEY>(or <*>, <#>) to select number to redial. 3. Press <REDIAL> to redial the number. NOTE1: Press <OK> to see time and date of the call arrival. Then press <REDIAL>                to redial the number or press <OK> again to save the number in memory. NOTE2: Missed history is available only when caller ID is activated.
 27ENTER LOCK CODE _ _ _ _ MY PHONE NUMBER02255558282 BACK LIGHT ►    10 SECONDS CONTRAST   Erasing Call History    1. Press <MENU>, <8> (Security).    2. Enter lock code.    NOTE: Lock code is set as 0000 from the factory.  To change lock code see page 33    3. Press <6> (Erase Logs).    4. Press <1> (Outgoing Clear).    5. Press <OK> to confirm.       Erasing missed and all logs use the same steps.    Call Timer Display    1. Toggle Call Timer Display.    2. Press <MENU>. Press <7> (Configuration).    3. Press <1> (Call Timer).    4. Scroll to select ON or OFF.    5. Press <OK> to confirm.   DISPLAYING YOUR PHONE NUMBER  Displaying Your Phone Number    1. Press <MENU>, <7> (configuration).    2. Press <6> (My phone Number).   SETTING UP YOUR LCD  Set Timing for your LCD Back Light    1. Press <MENU>, <7> (configuration).    2. Press <3> (Back Light).    3. Press <VOLUME KEY>(or <*>, <#>) to set how long       your phone waits before the backlight turns off.     Setting your LCD Contrast    1. Press <MENU>, <7> (configuration).    2. Press <4> (Contrast).    3. Press <VOLUME KEY> or <*>, <#> to select contrast.       ERASE OUTGOING YES
 28MUTE 02255558282 TIME MODE ▶                  AM/PM ALARM ▶    ON07 : 00am 22 : 32pm ALARM MODE ▶             DAILY ALARM SOUND TIME 1 MINUTE  MUTE  This feature lets you mute the microphone, so that the other party cannot  hear your voice or the sound of your surroundings. This function is only available  during conversation.    1. Press <MENU>, <1>(Mute / Un-Mute) during conversation.       The message ‘MUTE’ blinks to indicate the function is working.       The other party can no longer hear you, but you can hear them.    2. Press <MENU>, <1> again to resume the conversation.   SELECTING TIME MODE     1. Press <MENU>, <4>(Time), <5>(Time Mode).    2. Select the time display mode by pressing  <VOLUME KEY> (or  <*> , <#> ).   AM/PM: Display 0~12 hours with A or P indicator        24 Hour: Display 00~24 hours    3. Press <OK> to save the change.    SETTING THE ALARM  You can set the alarm sound daily or one time only.    1. Press  <MENU>, <4>(Time), <1>(Alarm).    2. Select “ON” by Pressing <VOLUME KEY>  (or <*>, <#>)  and Press <OK>.    3. Enter alarm time and press <OK>.    4. Select alarm mode by pressing <VOLUME KEY>   (or <*>, <#>) and press <OK>.        Daily: Alarm sounds daily.        One time: Alarm sounds once.    5. Enter the duration of the alarm by pressing <VOLUME KEY>   (or <*>, <#>) and  press <OK>.        A bell icon appears in icon line. On alarm time,  the icon and “ALARM TIME” message blinks and alarm  activates. Press any key to stop the alarm.  Canceling the Alarm Time    1. Press <MENU>, <4>(Time), <1>(Alarm).    2. Select “OFF” by pressing <VOLUME KEY>  (or <*>, <#>) and press <OK> to store the setting.
 29 CHECKING AND CLEARING CALL TIMES  Checking the Last call Time    1. Press <MENU>, <4> (Time), <2>(Last Call).    2. Press <CLEAR> to exit the display.  Checking Accumulated Incoming Call Time    1. Press <MENU>, <4> (Time), <3>(Total Time),  <1> (Incoming).    2. Press <CLEAR> to exit the display.  Checking Accumulated Outgoing Call Air Time    1. Press <MENU>, <4> (Time), <3>(Total Time),  <2> (Outgoing).    2. Press <CLEAR> to exit the display.  Reset Accumulated Call Time    1. Press <MENU>, <4> (Time), <4> (Clear Call Time).    2. Press <STORE>. LAST CALL TIME                        3:25INCOMING CALL                        3:25OUTGOING CALL                   12:26:32CLEAR CALL TIME                     YES?
 30   SETTING WARNING ALERTS  You can set your phone to sound warning beeps that indicate:     - Each minute you are on a phone call     - When you are out of the service area  Setting/Releasing 1 Minute Alert    1. Press <MENU>, <5> (Sound), <4> (1 Min Alert).    2. Select ON or OFF by pressing <VOLUME KEY>(or <*>,<#>).    3. Press <OK>.    NOTE: When 1 minute alert is set, the phone gives alert sound        each minute while you are on a phone call.  Setting/Releasing Service Alert    1. Press <MENU>, <5> (Sound), <5>(Service Alert).    2. Select ON or OFF by pressing <VOLUME KEY>  (or <*>, <#>).    3. Press <OK>.    NOTE: When service alert is set, the phone gives alert sound  when the phone is acquiring or loses the service signal.  Setting/Releasing Connection Alert    1. Press <MENU>, <5> (Sound), <7> (Connect Alert).    2. Select ON or OFF by pressing <VOLUME KEY>  (or <*>, <#>).    3. Press <OK>.    NOTE: When service alert is set, the phone gives alert sound  When the call has been connected to the number dialed.  Setting/Releasing Voice Privacy Alert    1. Press <MENU>, <5> (Sound), <8>(VP Alert).    2. Select ON or OFF by pressing <VOLUME KEY>   (or <*>, <#>).    3. Press <OK>.    NOTE: When Voice privacy alert is set, the phone gives alert  sound when the voice privacy is on.         1 MINUTE ALERT   ▶                   OFF SERVICE ALERT   ▶                   OFF CONNECT ALERT   ▶                     ON VOICE PRIV ALERT ▶                       ON
 31                                Advanced Features  Changing Greeting Message System Reset Restricting Use of the Phone Locking / Unlocking the Phone Changing the Lock Code World Clock Calculator
 321: CALL TIMER     ▼ 2: GREETING MY Phon_FACTORY RESET                        YES PHONE INITIALIZATION MY Phone FRI     10/10      1:24A    CHANGING GREETING MESSAGE  This feature lets you change the greeting message that the phone displays during standby mode.     1. Press <MENU>, <7> (Configuration).    2. Press <2>(Greeting). Current greeting displays.    3. Press <OK> to change greeting.    4. Enter your new greeting message with alphanumeric keys    NOTE: Press <MESSAGE> to switch between capital and  lower case                Example) to enter “My Phone”  Press <6>, <9>, <9>, <9>, <#>, <7>, <MESSAGE>, <4>, <4>, <6>, <6>, <6>, <6>, <6>, <3>, <3>.    5. Press <OK> to save change.      SYSTEM RESET  To reset your phone settings to manufacture’s defaults, follow these steps:    1. Press <MENU>, <8> (Security).    2. Enter lock code.    NOTE: Lock code is set as 0000 from the factory.                To change lock code see page 34.    3. Press <8> (Factory Reset).    4. Select “YES” by pressing <VOLUME KEY> (or <*>, <#>).    5. Press <OK>.    6. “PHONE INITIALIZATION” blinks while the phone is  resetting.   To reset your phone settings to manufacture’s defaults and clear all user data, follow these steps:    1. Press <MENU>, <8> (Security).    2. Enter lock code.    NOTE: Lock code is set as 0000 from the factory.                To change lock code, see page 34.    3. Press <9> (Phone Reset).    4. Select “YES” by pressing  <VOLUME KEY> (or <*>, <#>).    5. Press <OK>.    6. “PHONE INITIALIZATION” blinks while the phone is resetting.
 331: OUTGOING     ▼ 2: INTERNATIONAL OUTGOING CALL ▶                ONOUTGOING CALL RESTRICTED INTENATIONAL ▶                ONINTERNATIONAL RESTRICTED- LOCKED - FRI     10/11     2:44P   RESTRICTING USE OF THE PHONE  You can restrict the use of the phone by unauthorized persons  Restricting Outgoing Calls    1. Press <MENU>, <8> (Security).    2. Enter lock code.    NOTE: Lock code is set as 0000 from the factory.                To change lock code, see page 34.    3. Press  <3> (Restrict), <1> (Outgoing).    4. Select ‘ON’ by pressing <VOLUME KEY> (or <*>, <#>).    5. Press <OK> to save change.  In this mode, when you try to call, “OUTGOING  CALL RESTRICTED” displays and no outgoing call  goes through.      Restricting International Calls    1. Press <MENU>, <8> (Security).    2. Enter lock code.    3. Press <3> (Restrict), <2> (International).    4. Select ‘ON’ by pressing <VOLUME KEY> (or <*>, <#>).    5. Press <OK> to save change.        In this mode, when you try to make an international  call (headed by 00), “INTERNATIONAL RESTRICTED”  displays and no outgoing goes through.   LOCKING / UNLOCKING THE PHONE  You can lock your phone so that calls cannot be made by unauthorized Persons. You can still receive incoming calls. Turning the phone off does not unlock the phone; the phone stays in locked mode until you change it.     1. Press <MENU>, <8> (Security).    2. Enter lock code.    3. Press <4> (Auto Lock).    4. Select ‘ON’ or ‘OFF’ by pressing   <VOLUME KEY> (or <*>, <#>).    5. Press <OK> to save the change.    NOTE1: When locked, the phone displays “LOCKED”.    NOTE2: When locked, you have to enter the lock code to make a call.    NOTE3: You can still receive incoming calls.
 34ENTER NEW CODE _ _ _ _ CONFIRM NEW CODE _ _ _ _1: WORLD CLOCK 2: CALCULATOR San Diego FRI     10/10      1:24A253+35 =288 1: WORLD CLOCK 2: CALCULATOR   CHANGING THE LOCK CODE  The lock code is preset to 0000 from the factory.  You can Change the lock code to any 4 digit number.     1. Press <MENU>, <8> (Security).    2. Enter lock code.    3. Press <1> (Change Code).    4. Enter your new lock code.    NOTE: The lock must be four numeric digits.    5. Press <OK>.    6. Re-enter new lock code for verification.    7. Press <OK> to confirm.    NOTE: CODE NOT MATCHED TRY AGAIN!” displays   if the second entry does not match the first entry.    World Clock  Allows you to check the current major cities around the world.  The screen shows the city name, current date and time.     1. Press <MENU>, <6> (Utility), <1> (World Clock).    2. Select <1> (View Clock), the city corresponding  to your time zone by pressing <VOLUME KEY> (or <*>, <#>).    3. The local date and time are displayed.     Calculator  Using this feature, you can use the phone as a calculator. The calculator provides the basic arithmetic functions: addition, subtraction, multiplication and division.    1. Press <MENU>, <6> (Utility), <2> (Calculator). 2. Enter the first number using the numeric keys. 3. Use <*>, <#> to select a sign for calculation. 4. To calculate the result, press the <OK>.
 35                             Optional Features  Call Forwarding Call Waiting Three-Way Calling Data Call Service
 36  Call Forwarding            Call Forwarding is a feature that lets you forward your incoming calls to another phone     number, even if your phone is turned off or is in no service area. Contact your service     provider to activate Call Forwarding.    Call Waiting      Call Waiting alerts you to a second incoming call while you are on the conversation.     When there’s another incoming call, you will hear warning beep. To respond to     the call waiting, press <REDIAL> or hit shortly the hook switch once.     Pressing <REDIAL> again or hitting the hook again will let you go back to the first call.        Contact your service provider to activate Call Waiting.    Three-Way Calling     Three-Way Calling is a feature that lets you set up a three-way conversation    with two different parties. While you’re in conversation with a party, hit the hook    switch and place another call with the third party. Then press <REDIAL> or hit the hook    switch again to connect the three parties together.  Contact your service provider to activate Three-Way Calling.    Data Call Service     Data call Service is a network dependent feature and is available only when your service   provider supports it. Check with your service provider for availability.    Connecting your PC requires optional cable, available separately.    1. Connect the phone to your PC with the provided Axesstel USB data cable.    2. Please refer to the manual provided with the data service kit for setting up  a connection on your PC.
 37                                  Miscellaneous  Menu Table Specification
 38  MENU OPTION TABLE  I II  III  Explanation 1. PHONEBOOK SEARCH  NAME  Used when searching for a phone number in the phonebook by name / number / stored memory number NUMBER LOCATION STORE   Used when storing a phone number and name in the phone book ERASE  NAME  Used when erasing a phone number in the phone book NUMBER LOCATION 2. MESSAGES NEW MESSAGE    Send a new message INBOX Received SMS messagesVOICE MSG  SMS Services TEMPLATES   Open pre-saved templates SAVED MSG   Shows sent and failed messages DRAFT MSG    Shows stored new typed messages ERASE MSG    Erase received messages MSG OPTION MSG ALERT  Set message alert MSG ALERT TYPE  Set message alert type SET REMINDER  Set message reminder MSG PRIORITY Set default message prioritySAVE SENT MSG  Auto-save sent messages AUTO DELETE  Auto-Delete received messages If INBOX is full EDIT TEMPLATE  Edit default templates 3. CALL HISTORY MISSED CALL    Stores missed incoming calls INCOMING   Stores phone numbers of calls received recently OUTGOING  Stores phone numbers called recentlyALL CALL LIST    Show all kind of call log 4. TIME ALARM  ON / OFF  Alarm On / Off LAST CALL    Shows time duration of last call TOTAL TIME  INCOMING  Shows accumulated incoming call time OUTGOING Shows accumulated outgoing call timeCLR CALL TIME  Resets accumulated call timeTIME MODE  AM / PM  Time: AM/PM display mode 24 HOURS  Time: 24 Hours display mode 5. SOUND RING TYPE  ON / OFF  Determines whether the phone alerts the incoming call with sound or only with message RING TONE    Selects the ring type RING VOLUME  Adjust ring volume 1 MIN ALERT  ON / OFF  Beeps at one minute interval during conversation SERVICE ALERT  ON / OFF  Beeps when the phone is getting out of or entering service area ALARM TONE    Selects alarm sound CONNECT ALERT  ON / OFF  Beeps when the call is connected VP ALERT  ON / OFF  Beeps when the call is on voice privacy mode 6. UTILITY  WORLD CLOCK  VIEW CLOCK  Shows time around the world SET LOCATION Set your city CALCULATOR    Use the phone as Calculator 7. CONFIGURATION CALL TIMER  ON / OFF  Toggles call timer display GREETING   Change greeting BACK LIGHT  Always off/  Set timing for back light
 3910,30,60 seconds/ Always on CONTRAST   Set LCD Contrast LANGUAGE  ENGLISH / CZECH  Select your language DATE FORMAT  MM/DD, DD/MM  Set date format MY PHONE #  Show your phone number8. SECURITY CHANGE CODE    Change Lock code RESTRICT  OUTGOING Restrict outgoing calls INTERNATIONAL Restrict international calls LONG DISTANCE  Restrict long distance calls AUTO LOCK  ON / OFF  Lock the phone VERSION    Show phone information ERASE LOGS OUTGOING CLR  Erase outgoing calls history INCOMING CLR Erase incoming calls historyMISSED CLEAR Erase missed calls historyALL CALL CLR  Erase all calls history ERASE NAMES    Erase all phonebook entries FACTORY RESET    Reset to default settings PHONE RESET    Reset to default settings and clears user data 9. DATA SERVICE COM PORT  SERIAL / USB  Set port type DATA BAUD  19.2 / 115.2 Kbps  Set data communication speed SET RECEIVE  VOICE ONLY FAX ALWAYS MODEM ALWAYS Set operation mode    SPECIFICATIONS  Frequency Range PX310  PX310F  Rx: 462 ~ 468 MHz Tx: 452 ~ 458 MHz PX320 PX320F  Rx: 869 ~ 894 MHz Tx: 824 ~ 849 MHz PX330 PX330F  Rx: 1930 ~ 1989 MHz Tx: 1850 ~ 1909 MHz Channel Bandwidth  CDMA 1.23 MHz Stability of frequency  0.4 ppm External appearance (mm)  205 x 115 x 37 mm Weight  500 g (with battery) Sending output  maximum 0.23W E.R.P Temperature of operation Relative humidity  -20 ~ +50 degrees Celsius   5% ~ 90% Adapter  Input: AC 100~240V 50~60Hz  Output: DC 5.5V/1A Battery  Standby  16mA (Slot Cycle  Index: 2) 72 hours  Talk 2.5 Hours
 SAR INFORMATION  THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.  Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the when worn on the body , as described in this user guide, is 1.12 W/Kg . (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can
 be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: PH7PX330.  Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements.    SAFETY INFORMATION FOR RF EXPOSURE  Body worm operation  This device was tested for typical body-worn operations with the back of the phone kept 20 mm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain a 20 mm. separation distance between the user’s body and the back of the phone, including the antenna. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.
  Safety Information  1 . SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS .POTE NTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cauls e an explosion or fire resulting in bodily injury or even death.  INTERFERENCE TO MEDICAL DIVICES Certain electronic equipment may be shielded against RF signal from you wireless phone. (pacemakers, Hearing Aids, and so on) Turn your phone OFF in health c are facilities when any regulations posted in these areas instruct you to do so. RF signals may affect improperly installed or inadequately shielded electronic system in motor vehicles.  .EXPOSURE TO RF ENERGY Use only the supplied or an approved replacement antenna. Do not touch the antenna unnecessarily when the phone is in use. Do not move the antenna close to, or couching any exposed part of the body when making a call.  FCC Compliance Information  This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:  (1) This device may not cause harmful interference, and (2) This device must accept any interference received.    Including interference that may cause undesired operation.
 U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT  INFORMATION TO THE USER  NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation This equipment generates, uses, and can radiate radio frequency energy and, if Not installed and used in accordance with the instructions, may cause harmful Interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: *- Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.  *- Connect the equipment into an outlet of a circuit different from that to which the receiver is connected. *- Consult the dealer or an experienced radio/TV technician for assistance. Changes or modification not expressly approved by the party responsible for Compliance  could void the user’s authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables.

Navigation menu