Azden 30XT HANDHELD WIRELESS MICROPHONE User Manual AZDEN CORPORATION

Download:
Mirror Download [FCC.gov]
Document ID	777289
Application ID	j1IwWUfCF79eRQleNyldhg==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.6kB (32507 bits)
Date Submitted	2007-04-05 00:00:00
Date Available	2007-04-05 00:00:00
Creation Date	2007-04-05 09:54:34
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2007-04-05 09:54:46
Document Title	AZDEN CORPORATION
Document Creator	Acrobat PDFMaker 7.0.7 for Word
Document Author:	WA

147 New Hyde Park Road ~ PO Box 10 ~ Franklin Square, NY 11010
Phone 516-328-7500 ~ Fax 516-328-7506 ~ Website: www.azdencorp.com ~ E-mail: walonso@azdencorp.com
30XT Transmitter Instructions
(1) Open the battery compartment lid by sliding it down and lifting it up.
(2) Insert one 9 volt battery into the compartment. Make sure the battery polarity is
correct as marked inside the battery compartment.
(3) Power
Switches the transmitter “On” or “Off”.
(4) Audio
Prior to first turning the 30XT ON it is best to set the AUDIO switch to OFF. When you are
ready to begin transmitting, switch to ON. The OFF position acts as a “mute” that
maintains the RF signal but turns off the audio.
(5) Mic Connector/Locking Ring
This 3-pin XLR connector is the microphone input. Any low impedance microphone with
a corresponding connector can be attached here.
Once the microphone is plugged into the 30XT the locking ring should be rotated
clockwise until snug. To remove the microphone, first rotate the locking ring
counterclockwise and then, while pressing the XLR release, pull the microphone away
from the 30XT.
(6) Mic Input Level Control
The mic input level control enables you to adjust the input level of the connected
microphone. Using the supplied tool, turn the dial clockwise to increase, or
counterclockwise to decrease the input level.
(7) LCD Display:
The display will light up when the power is turned “On”. The LCD displays show the
following information.
Channels numbered 1 to 240.
Battery Condition: Using a 3 step indicator. (1 Low to 3 High)
To change the channel number, use the tip of the tool provided and press the UP or
Down button to the desired channel, numbered from 1 to 240. Once the desired channel
number has been selected on the transmitter, set the receiver to the same channel
number.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Company                         : AZ
Source Modified                 : D:20070328153347
Create Date                     : 2007:04:05 09:54:34-04:00
Creator Tool                    : Acrobat PDFMaker 7.0.7 for Word
Modify Date                     : 2007:04:05 09:54:46-04:00
Metadata Date                   : 2007:04:05 09:54:46-04:00
Document ID                     : uuid:21c328e7-4dbc-4e75-a59d-46dbf4f23492
Instance ID                     : uuid:a58ae71d-cc32-46c2-bfbc-8cf14ba9d780
Version ID                      : 3
Format                          : application/pdf
Title                           : AZDEN CORPORATION
Creator                         : WA
Subject                         : 
Headline                        : 
Page Count                      : 1
Page Layout                     : OneColumn
Language                        : EN-US
Author                          : WA

EXIF Metadata provided by EXIF.tools