Azden WM-PRO WIRELESS MICROPHONE TRANSMITTER User Manual USERS MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	363807
Application ID	p8P8G82OWNPtA7zv69KRTA==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	176.45kB (2205657 bits)
Date Submitted	2003-10-09 00:00:00
Date Available	2003-10-09 00:00:00
Creation Date	2003-10-03 08:55:59
Producing Software	Hewlett-Packard Intelligent Scanning Technology 3
Document Lastmod	0000-00-00 00:00:00
Document Title	USERS MANUAL
Document Author:	summer [ PC54 ]

~ ~ yfiAZDEN’
WL/T —PRO LAPEL MICROPHONE AND TRANSMITTER
WSW MARIN.
Thank you for nurchesing the AZDEN WL/T-PRO WIRELESS LAPEL MICROPHONE AND
TRANSMITTER. Read these instructions carefully for correct use and retain it for future
reference.
USAGE: The WL/T—PRO is designed tor use with the AZDEN WR—PRO receiver used with
our WHX—PRO system.
. Thil evetem opium in the VHF bend in which interference is" very low. Either at two transmission
frequencies can be selected (PH 174 M or (F2216 for clearest transmission and reception.
O Thifi eyetem conforms to Part of FCC rulee Contact FCC office tor necessary tilino forms.
0 Do not use or store the wireles microphone syatem at an extremely hiuh temperature or humidity.
Q Do not use the system near a broodcaatim etation, airport or on an airolane. If you ere interfering
with other trenemieeions, you must switch frequencies or turn off the set.
WL/T—PRO SET UP
(1) LOADING THE BATTERY: (see dieoram)
Insert one (1) 9V battery Into the Trammitter. BEING CAREFUL NOT TO FORCE THE BATTERY
COMPARTMENT CLOSED. If it doesn't close easily, take the battery out and turn it around.
(2) MICROPHONE :
Film the EX—503 (IaDCl mic) into the mil: fleck Extend the cord as much as possible, it doubles
as the transmitters antenna.
(3) POWER/FREQUENCY SWITCH:
This elide switch is used to turn the eyetem on and of! and to select a frequency. Turn on the
WM—PRO to F], the LED will liaht uD indicating that the battery is good and the transmitter is
functionina Droperly. I1 you find reception to be noisy an F1. change position of switch to F2 Make
sure that the Receiver is on the same frequency as the transmitter.
(4) MOUNTING :
The trenemitter can be mounted to a belt using the clip provided or placed in a pocket.
Loedlna Battery
WM — PRO TRANSMlTl'ER
Open the battery compartment ild by eliflirw It
down and rlilina the lid. Ineert a 9 volt battery
into the battery compartment with the correct
polarity. Directiena are on the inside left of the
battery compartment.
Notee:
Q The transmitter will work continuously for about 10 hours with one ALKALINE battery. When the
trensmieeion strength weaken: or the reception uneitivity dacreaeee or the quality of the received sound
is degraded. replace the battery
0 When the transmitter and recerver are not to be used for a long period of time. remove the battery
to oravant acid Ieakeoe.
SPECIFICATIONS
Trenemieeien frequency: F1 171. MHZ Power continuation: 30mA
F2 216 MHZ Dimeneione: BS(h)xSO(n)x21.5(d)mm
Modulation eyeum: FM modulat'on Weight: 989 (including battery)
Modulation eeneltivity: WE SPL et 22.5KH1 Dev Mien-when: Electret condenser EX-503
Battery: One 9V (not included)
Design and specifications subject to change without notice
AZDEN CORPORATION AlDEN GORPORATION
|— i2— 17, KAMIRENJAKUt MIYAKA ”7 NEW eyes PARK Pow
mayo, |8| JAPAN mmrtun seuanzmy Hero
TEL 516-328-7500

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 1
Producer                        : Hewlett-Packard Intelligent Scanning Technology.3
Author                          : summer [ PC54 ]
Create Date                     : 2003:10:03 08:55:59

EXIF Metadata provided by EXIF.tools