Azlan Logistics TC-HDMIW30 HDMI Wireless Extender User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3821353
Application ID	4tJhKLn12MFNkFa9ioEGwA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	60.98kB (762242 bits)
Date Submitted	2018-04-19 00:00:00
Date Available	2018-04-19 00:00:00
Creation Date	2017-06-21 10:17:43
Producing Software	Corel PDF Engine Version 16.1.0.843
Document Lastmod	2018-04-16 10:53:51
Document Title	未命名 -1
Document Creator	CorelDRAW X6
Document Author:	Administrator

· Important Safety Notice
Please read below safety instructions carefully before installation and
· Panel Description
· Features
1. HDMI Extender TX sender
1. Support HDMI1.3, compatible with HDCP1.2.
operation:
2. Highest resolution up to 1080p full HD.
1. Please pay attention to all the warnings and hints on this device.
3. Strong anti-interference ability by running at 5GHz
2. Do not expose this unit to rain, moisture and liquid.
3. Do not put any stuff into the device.
4. Do not repaire the device or open the enclosure without professional
person guidence to avoid electronic shock .
5. Make sure good ventilation openings to avoid product overheating
Antenna
4. Support point to point wireless configuration.
5. Support IR passback with 20-60KHz frequency.
6. 50 meters long range transmission distance.
HDMI input
7. Plug and play, easy installation.
Connect with HDMI source device
· Package Contents
to avoid cables damage.
Power input
Connect with USB power cable
Power indicator
LED indicator turn on when power on
IR blaster extension
cable interface
8. Use DC5V/2A only. Make sure the specification matched if using 3rd party
DC adapters.
HDMI Extender RX
receiver x1pcs
DC5V/2A power
adapter x1pcs
USB Cable
x1pcs
2) Connect HDMI output to HDMI display device and connect IR
receiver extension cable to IR IN interface.
3) Power on the device (power led lights) and it works.
wirelessly, it has strong anti-interference ability by running at 5GHz
Note:
operation frequency, and supports point to point connection. IR passback
Power input
with 20-60KHz frequency helps to remote control the source device
conference, home entertainment and multi-media education etc.
IR blaster extension
cable x1pcs
IR receiver extension
cable x1pcs
User manual x1pcs
Note:
1) Transmission distance will be different due to the environment.
2) Wall, brick or glass will shorten the signal cover range or cause big
signal loss.
Connection instruction:
1) Connect HDMI input to HDMI source device and connect IR blaster
extension cable to IR OUT interface of the sender (TX).
HDMI Extender TX
sender x1pcs
allows to transmit and extend HDMI signal up to 50 meters long away
from the receiver side. It is really a ver y good solution for meeting,
HDMI display
Connect with IR blaster extension cable. Please
put the IR blaster close to source device to best
transmit the IR signal from receiver
2.HDMI extender RX receiver
This HDMI wireless extender includes transmitter unit and receiver unit,
· Connection
Wireless connections It’s on when the transmitter and the receiver
connect well with each other, otherwise, it’s off
indicator
6. Shut off power and make sure environment is safe before installation.
· Introduction
Receive wireless signal
operation frequency .
damage.
7. Do not plug-in/out the network cables and IR cables when it is in using
Connect with IR receiver extension cable. Please
IR receiver extension
make sure the remote control is within the required
cable interface
range of IR receiver
· Installation Requirement
1. HDMI source device (DVD, PS3, Set top box, PC etc)
2. HDMI display device like SDTV, HDTV, and projector with HDMI port.
Connect with DC5V/2A power adapter
Wireless connections It’s on when the transmitter and the receiver
connect well with each other, other wise, it’s off
indicator
Data transmission
indicator
Led blinks slowly when it is building connection.
Led blinks fast when it is successfully connected
and transmitting data
HDMI output
Connect with HDMI display device
1) When the wireless signal transmits through wall, glass or other
obstacles, it will cause signal loss. Please install this device in
good environment with few obstacles.
2) The external environment wireless signal will affect transmission,
such as micro waver, wireless mouse and keyboard etc.
· FAQ
Q: Transmitter and receiver can't be connected with each other?
IR
performance IR remote control
and interface
A: 1)Please check if the wireless connection light on product blinks
properly.
Audio formats Supported
L/R stereo audio
HDMI Wireless Extender
10.2Gbps
HDMI
Input and output TMDS signal 0.7～1.5Vp-p(TMDS)
performance
5Vp-p(TTL)
and interface Input and output DDC signal
Input cable length supported ≤5m(AWG26 HDMI1.3cable standard)
Maximum transfer rate
2) Restart the receiver.
Q: The wifi LED indicator of the transmitter keeps on, but no signal output
on display/monitor?
Output cable length supported ≤5m(AWG26 HDMI1.3cable standard)
A: 1) please check if there is an HDMI signal input of sender TX
2) Tr y to connect the signal source directly to display device to see if
there is signal output from source device or change the signal
source, HDMI cables and tr y again.
Transmission method
Wireless
performance Transmission distance
and interface
Latency
Protection
level
Electrostatic protection
of the whole machine
5G Wireless transmission
50 Meters
≤200 ms
1a Contact discharge level 3
1b Air discharge level 3
Standard: IEC61000-4-2
Q: Display not fluent and stable
A: 1) Please move the position of sender (TX) and receiver (RX) and make
sure the device is within the signal coverage.
2) Restart the eceiver.
Working temperature
0～40℃
Operating
-20～70℃
Storage temperature
Environment
Humidity (no condensation) 0～90%
3) Remove other wireless signal disturbance and reduce the
obstacle on the way.
Body
properties
· Specification
Reliability
Power
Supply
Support IR passback with
20-60KHz frequency
Voltage/Current
DC5V/2A
Power consumption
T X＜2 W
HDMI compliance
HDMI1.3
R X＜5 W
HDCP compliance
HDCP1.2
HDMI
480i@60Hz、480p@60Hz、
Performance
And Interface HDMI resolution supported 576i@50Hz、576p@50Hz、
720p@50/60Hz、1080i@50/60Hz、
1080p@50/60Hz
Dimension
TX: 88.90(W) x 38.99(D) x15.17(H)mm
RX: 131.65(W) x 95(D) x 19.90(H)mm
Material
TX: Plastic
RX: Iron alloy material + cr ystal panel
Finishing
Grit blast
Color
Black
Weight
TX：30g， RX：220g
Mean time between failures
(MTBF)
>30000 Hours
This product can only be used indoors
antenna type only allows use of
columnar Antenna and PIFA Antenna
Disclaimer
The product name and brand name may be registered trademark of
related manufacturers. TM and ® may be omitted on the user manual.
The pictures on the user manual are just for reference, and there may be
some slight difference with the real products.
We reser ve the rights to make changes without further notice to a
product or system described herein to improve reliability, function or
design.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : Administrator
Create Date                     : 2017:06:21 10:17:43+08:00
Modify Date                     : 2018:04:16 10:53:51+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Administrator
Title                           : 未命名 -1
Creator Tool                    : CorelDRAW X6
Metadata Date                   : 2018:04:16 10:53:51+08:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Document ID                     : uuid:88aa1716-710b-486f-80e4-ef43e924a74d
Instance ID                     : uuid:7b8d809a-2b81-4515-80ed-533e148e7c7b
Page Count                      : 3
Profile CMM Type                : Linotronic
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : Hewlett-Packard
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : Hewlett-Packard
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)

EXIF Metadata provided by EXIF.tools