Azlan Logistics TC-HDMIWM TC-HDMIWM User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3762055
Application ID	BMM+N1WxAqLKOQ7dhnrB2Q==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	163.34kB (2041792 bits)
Date Submitted	2018-02-27 00:00:00
Date Available	2018-02-27 00:00:00
Creation Date	2017-05-26 14:54:46
Producing Software	Corel PDF Engine Version 16.1.0.843
Document Lastmod	2018-02-27 10:41:29
Document Title	未命名 -1
Document Creator	CorelDRAW X6
Document Author:	Administrator

· Important Safety Notice
Please read below safety instructions carefully before installation and
3) It is recommended that the distance between each unit should be more
than 5 meters.
2. Do not expose this unit to rain, moisture and liquid.
2. HDMI display device like SDTV, HDTV, and projector with HDMI port.
· Features
3. Do not put any stuff into the device.
1. Smart portable design, wonderful performance.
4. Do not repaire the device or open the enclosure without professional
2. Highest resolution up to 1080p full HD.
person guidence to avoid electronic shock .
5. Make sure good ventilation openings to avoid product overheating
damage.
· Panel Description
1. HDMI Extender TX sender
4. Support point to point configuration, one to many (1 to 2) configuration
HDMI display
and many to many (2 to 2, 2 to 1) configuration.
5. Support IR passback with 20-60KHz frequency.
Power input
7. Do not plug-in/out the network cables and IR cables when it is in using
6. Supports button control to set channels and IR contoller to switch and
Wireless connections
indicator
to avoid cables damage.
choose input sources from receiver side.
This HDMI wireless extender includes transmitter unit and receiver unit,
· Package Contents
Power input
Connect with DC5V/2A power adapter
HDMI input
Connect with HDMI source device
Wireless connections
indicator
wirelessly, it has strong anti-interference ability by running at 5GHz
operation frequency. This wireless extender not only supports point to
point configuration, but also supports one to many (1 to 2) and many to
many (2 to 2, 2 to 1) configuration. This extender supports wide range IR
passback frequency 20-60KHz to realize remote control of source devices
HDMI Extender TX
sender x1pcs
HDMI Extender RX
receiver x1pcs
DC5V/2A power
adapter x2pcs
Connect with IR blaster extension cable. Please
put the IR blaster close to source device to
better transmit the IR signal from receiver
Antenna
Launch wireless signal
Input CHANNEL
indicator
Indicate the input CHANNEL as a number, and
when the CHANNEL of transmitter as same as
the CHANNEL of receiver, wireless transmission
connected
without running wires simultaneously, perfect for application of
conference, home entertainment and education etc.
Note:
1) Transmission distance will be different due to the environment.
2) Wall, brick or glass will shorten the signal cover range or cause big
signal loss.
IR blaster extension
cable x1pcs
IR receiver extension
cable x1pcs
User manual
x1pcs
Remote controller
×1pcs
It’on
when the transmitter and the receiver
connect well with each other, other wise, it’off
IR blaster extension
cable interface
from receiver side. With both button control and IR controller, makes
or more HDMI source signal to one or more screens in long distance
Data transmission
indicator
HDMI signal indicator HDMI signal input, it always on
allows to transmit and extend HDMI signal up to 50 meters long away
channel setting easily. It is really a ver y good solution for transmitting one
7. 50m long range transmission distance.
DC adapters.
· Introduction
3. Strong anti-interference ability by running at 5GHz operation frequency .
6. Shut off power and make sure environment is safe before installation.
8. Use DC5V only. Make sure the specification matched if using 3rd party
1. Point to Point connection:
1. HDMI source device (DVD, PS3, Set top box, PC etc)
operation:
1. Please pay attention to all the warnings and hints on this device.
2.HDMI Extender RX receiver
· Installation Requirement
Digital control button Display CHANNEL channel parameters
IR remote control
window
Receive IR remote control signal
Connect with DC5V/2A power adapter
It’on
when the transmitter and the receiver
connect well with each other, other wise, it’off
Led blinks slowly when it is building connection.
Led blinks fast when it is successfully connected
and transmitting data
HDMI output
Connect with HDMI display device
IR receiver extension
cable interface
Connect with IR receiver extension cable. Please
make sure the remote control is within the required
range of IR receiver
Antenna
Output CHANNEL
indicator
Receive wireless signal
2. One to two connection:
HDMI display
Indicate the output CHANNEL as a number, and
when the CHANNEL of transmitter as same as
the CHANNEL of receiver, wireless transmission
connected
Digital control button Display CHANNEL channel parameters
IR remote control
window
Receive IR remote control signal
HDMI display
· FAQ
3. Matrix connections
· Specification
Q: Transmitter and receiver can't be connected with each other?
A: 1) Please check and make sure both receiver and transmitter have been
powered on
Dimension
Power
supply
2) Please check and make sure the input channel of the transmitter and
the output channel of the receiver are the same.
HDMI display
on display/monitor?
2) Tr y to connect the signal source directly to display device to see if
there is signal output from source device or change the signal
Q: Display not fluent and stable
A: 1) Please move the position of sender (TX) and receiver (RX) and make
sure the device is within the signal coverage.
2) Press “reset” button on the TX/RX panel, reset and reconnect.
1) Connect HDMI input with HDMI source device and connect IR blaster
extension cable with IR OUT interface of the sender (TX).
2) Connect HDMI output with HDMI display device and connect IR receiver
extension cable with IR IN interface.
3) Power on the device (power led lights) and it works.
Note:
1) When the wireless signal transmits through wall, glass or other
obstacles, it will cause signal loss. Please install this device in
good environment with few obstacles.
2) This wireless matrix can support up to 2 transmitter work with 2 receivers
simultaneously, please make sure each device keep 5 meters away from
others at least.
3) The environment wireless signal will affect transmission, such as
microware, wireless mouse and keyboard etc.
TX＜7W
HDMI compliance
HDMI1.3
HDCP compliance
HDCP1.2
HDMI resolution supported
480i@60Hz、480p@60Hz、
576i@50Hz、576p@50Hz、
720p@50/60Hz、1080i@50/60Hz、
1080p@50/60Hz
HDMI
Supports audio formats
performance
and interface Maximum transfer rate
source, HDMI cables and tr y again.
Connection instruction:
DC5V/2A
Power consumption
Q: The wifi LED indicator of the transmitter keeps on, but no signal output
A: 1) please check if there is an HDMI signal input of sender TX
HDMI display
Voltage/Current
3) Remove other wireless signal disturbance and reduce the
obstacle on the way.
Disclaimer
The product name and brand name may be registered trademark of related
manufacturers.TM and ® may be omitted on the user manual. The pictures
on the user manual are just for reference, and there may be some slight
difference with the real products.
We reser ve the rights to make changes without further notice to a product
or system described herein to improve reliability, function or design.
Rx＜5W
L/R stereo audio
10.2Gbps
Audio signal
transmission format
L/R stereo audio
Input and output TMDS signal
0.5～1.5Vp-p(TMDS)
Input and output DDC signal
5Vp-p(TTL)
Input cable length supported
≤5m(AWG26 HDMI1.3cable standard)
Output cable length supported
≤5m(AWG26 HDMI1.3cable standard)
IR
performance IR remote control
and interface
Support IR passback with
20-60KHz frequency
Transmission method
Wireless
performance Transmission distance
and interface
Latency
5.8G Wireless transmission
Protection
level
Electrostatic protection
of the whole machine
50 Meters
≤200 ms
1a Contact discharge level 3
1b Air discharge level 3
Standard: IEC61000-4-2
Working temperature
Operating
Storage temperature
environment
Humidity (no condensation)
0～50℃
-10～70℃
0～90%
Body
properties
Reliability
95(W) x 120.58(D) x 20.1(H)mm
Material
Iron alloy material + cr ystal panel
Processing technology
Sandblasting
Colour
black
Weight
TX：200g，RX：200g
Mean time between failures
(MTBF)
>30000 Hours
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any inte rference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interferenceto radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
Reorient or relocate the receiving antenna.
Reorient or relocate the receiving antenna.
Consult the dealer or an experienced radio/TV technician for help
important announcemen
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator and your body.
WiFi 5G indoor use only
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
The device fix to P to MP.
This device is not subject to professional installation.
The product can only use manufacture original antenna which is dipole antenna.
HDMI Wireless Matrix Extender
Support many
to many

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : Administrator
Title                           : 未命名 -1
Create Date                     : 2017:05:26 14:54:46+08:00
Creator Tool                    : CorelDRAW X6
Modify Date                     : 2018:02:27 10:41:29+08:00
Metadata Date                   : 2018:02:27 10:41:29+08:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Document ID                     : uuid:83c3d2bd-78a0-4ad7-98b0-9da3b194016c
Instance ID                     : uuid:91ac7176-0816-418f-931d-55096acb0e09
Profile CMM Type                : Linotronic
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : Hewlett-Packard
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : Hewlett-Packard
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 2
Author                          : Administrator

EXIF Metadata provided by EXIF.tools