Aztech Associates S000-0271 802.11b Modem User Manual

Aztech Associates Inc. 802.11b Modem Visual Inspection Test Procedure

a href="https://usermanual.wiki/Aztech-Associates" itemprop="url"> Aztech Associates >

Contents

Installation Guide 2

TRIPMASTER ranger 802.11b Hardware Installation Guide January 25, 2005 1
Welcome Welcome to the installation guide for the TRIPMASTER ranger 802.11b, WLAN radio, which can be added to the TRIPMASTER DT-240 GPS system (or other compatible TRIPMASTER OBC), to transfer vehicle data from the truck to the terminal. Important Safety and Compliance Information Before you install or use the TRIPMASTER ranger 802.11b product, read the FCC and other regulatory material found below, as well as in the other documents that accompanied your order. This section provides information on the following topics • FCC compliance statement (USA); • Industry Canada Certification. FCC Complicance Statement (USA) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: This device has been tested with the antenna listed below for professional Installation only, and only this antenna may be used. Caution : Changes or modifications to this unit not expressly approved by the party responsible for compliance, could void your authority to operate this equipment. Industry Canada Certification This Class B digital apparatus complies with Canadian ICES ICES-003 and RSS 210. Unpacking the TRIPMASTER ranger 802.11b Components When you unpack your installation kit : 2
• Check all items against your shipping order to ensure that you have received all the components. If a component is missing, contact customer support. • Inspect the equipment for visible shipping damage. If you notice any damage, contact customer support. Your TRIPMASTER ranger 802.11b installation kit includes the following components: A. A7025-A-0000 ranger 802.11b WLAN radio B. A7024-A-0901 or A7025-A-0901 Connection cable between ranger 802.11b and DT240 C. MLPVDB902/2400S (Black) or WMLPVDB902/2400S (White) low profile exterior antenna. This antenna will be supplied with an antenna mount, which will be one of the following types depending on the installation requirements: NMO mount with up to 10 feet RG58/U cable and SMA M connector Or Magnetic Mount Antenna Base such as Z1065B with up to 10 feet RG58/U cable and SMA M connector Or Mirror Mount Antenna Base such with up to 10 feet RG58/U cable and SMA M connector D. Ferrite noise supressor, Steward HFA150068-OA2 or equivalent Safety Recommendations Before installing the TRIPMASTER ranger 802.11b, please review the following guidelines to protect the equipment and ensure your safety. • Turn off the vehicle; • Make sure that the parking brake is fully engaged; • Disconnect the vehicle’s battery prior to connecting any wires to the vehicle’s power supply. Tools Required Make sure you have the following tools and supplies on site, before installing the TRIPMASTER ranger 802.11b WLAN : • Drill; • ¾ inch-diameter drill bit; • Multimeter; • Phillips screwdriver; • Tie-Wraps; • Weather-resistant sealant or caulking; • Self-drilling; self-tapping screws. 3
Download:
Mirror Download [FCC.gov]
Document ID519265
Application ID7n7DQrrGP2Gkjc73fiIPIQ==
Document DescriptionInstallation Guide 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize15.15kB (189400 bits)
Date Submitted2005-03-02 00:00:00
Date Available2005-03-02 00:00:00
Creation Date2005-01-26 11:02:28
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2005-01-26 13:32:31
Document TitleWelcome
Document CreatorAcrobat PDFMaker 5.0 for Word
Document Author: mbeaudoin
FCC ID Filing: SCLS000-0271

Navigation menu