AzureWave Technologies WH035 HDMI Display Mini Card User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1377360
Application ID	yu/d0cWkl+0eXAcK+3K2jQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.99kB (337320 bits)
Date Submitted	2010-11-17 00:00:00
Date Available	2011-05-16 00:00:00
Creation Date	2010-10-12 11:39:46
Producing Software	PDF-XChange Viewer [Version: 2.0 (Build 42.6) (Oct 21 2009; 16:56:55)]
Document Lastmod	2010-11-09 18:10:04
Document Title	User Manual
Document Creator	Acrobat PDFMaker 8.1 for Word
Document Author:	stephen.huang

AW-WH035 HDMI Display Mini Card
WirelessHD Application Controller (WAC)
User’s Manual
1. Confirm AW-WH035 hardware is installed in the display mini card slot of
notebook or connect with PC by USB and HDMI by the test board.
2. Install WirelessHD Application Controller (WAC) software by click on
“setup” file, and then follow the instruction by software installer.
3. Click on “WiHD Controller” from the desktop to enable WAC after finish the
software installation.
4. Click on “Network” button of WAC for into Network menu.
5. Select the WiHD receiver from “Current Networks” section click on
“Connect” button.
6. WirelessHD network will be linked and display the indicator of connection.
The video on local notebook will be displayed on the TV or HDMI monitor
connected with WiHD receiver.
FCC Statement :
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate this
equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still
responsible for the FCC compliance requirement of the end product, which
integrates this module.
20cm minimum distance has to be able to be maintained between the antenna
and the users for the host this module is integrated into. Under such
configuration, the FCC radiation exposure limits set forth for an
population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to
keep at least 20cm separation with the antenna while this end product is
installed and operated. The end user has to be informed that the FCC
radio-frequency exposure guidelines for an uncontrolled environment can be
satisfied. The end user has to also be informed that any changes or
modifications not expressly approved by the manufacturer could void the
user's authority to operate this equipment. If the size of the end product is
smaller than 8x10cm, then additional FCC part 15.19 statement is required to
be available in the users manual: This device complies with Part 15 of FCC
rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following "
Contains TX FCC ID: TLZ-WH035 ". If the size of the end product is larger than
8x10cm, then the following FCC part 15.19 statement has to also be available
on the label: This device complies with Part 15 of FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-702
Company                         : MC SYSTEM
Source Modified                 : D:20101012033934
Creator Tool                    : Acrobat PDFMaker 8.1 for Word
Create Date                     : 2010:10:12 11:39:46+08:00
Metadata Date                   : 2010:11:09 18:10:04+08:00
Modify Date                     : 2010:11:09 18:10:04+08:00
Document ID                     : uuid:be274ffe-375f-4ec6-bc58-6940d8b5c29e
Instance ID                     : uuid:f6ec17a6-2fab-4760-a068-b139353255ff
Subject                         : 8
Format                          : application/pdf
Creator                         : stephen.huang
Title                           : 
Producer                        : PDF-XChange Viewer [Version: 2.0 (Build 42.6) (Oct 21 2009; 16:56:55)]
Page Count                      : 4
Page Layout                     : OneColumn
Language                        : EN-US
Author                          : stephen.huang

EXIF Metadata provided by EXIF.tools