AzureWave Technologies WH036 WirelessHD Box User Manual TX User s Manual 0726modified

Download:
Mirror Download [FCC.gov]
Document ID	1509951
Application ID	qyi5uHjz/CWqaDkjjmbnKg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.78kB (184735 bits)
Date Submitted	2011-07-27 00:00:00
Date Available	2011-07-27 00:00:00
Creation Date	2011-07-26 15:48:49
Producing Software	GPL Ghostscript 9.0
Document Lastmod	2011-07-26 16:19:08
Document Title	TX_User's_Manual_0726modified
Document Creator	PDFCreator Version 1.1.0

WirelessHD Tx/RX Box
User’s Manual
FCC Statement
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
IC Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B onforme á la norme NMB-003 du Canada.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire
de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
This device is not permitted for used on aircraft or satellites.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
Index
Introduction ...................................................................................................................... 1
1.1
Product Layout ........................................................................................................ 1
1.2
Features ..................................................................................................................... 1
1.3
Package Content ..................................................................................................... 2
1.4
Specification Table ................................................................................................. 2
1.5
LED Indication.......................................................................................................... 3
1.6
Connectors and end-user interfaces ................................................................. 4
2 Installation Steps ............................................................................................................ 4
3 Important Notice .............................................................................................................. 6
1 Introduction
AW-WH036T and AW-WH036R is a whole set of WirelessHD products. They can
stream uncompressed audio and video up Full HD (FHD) resolution. It works at 60GHz
band which is available on an unlicensed basis in many regulatory domains with a
typical range of 10 meter.
AW-WH036T and AW-WH036R replaces the HDMI cable and simplifies home theater
system installation. The source devices, such as BD player or Set Top Box, don’t need
to be located near to the TV.
1.1 Product Layout
Front View
Back View
1.2 Features
Standard: WirelessHD 1.0
Frequency: 60GHz
Data Rate: 4Gbps
Distance: 10m (In Room)
No Video Compression
Latency: <1ms
Video Resolution:
Up to 1920 X 1080 Progressive (1080P)
~ 8 Channels Audio (32 ~ 192KHz)


Array Antenna
HDMI 1.3 Compatible
DTCP (Digital Transmission Content Protection):AES-128 CTR mode
HDCP 2.0 Support
1.3 Package Content
The package include the below package content:
One set of AW-WH036T and AW-WH036R
Power Adapter
User’s Manual
1.4 Specification Table
Model Name
AW-WH036T & R
Product Description
HDMI (type-A ) wireless module
WirelessHD Standard
WirelessHD V1.0
HDMI Standard
HDMI 1.3a
Interface
HDMI (type-A )
Tx:
SB9210A HRTX RF Transceiver
SB9220A HRTX Network Processor
Major Chipset
AT91SAM7S256 Microcontroller
Rx:
SB9221A HRRX Network Processor
SB9211A HRRX RF Transceiver
AT91SAM7S256 Microcontroller
Dimension
139.9 x 23.6 x 11.08 mm(exclude heat sinks)
Antenna
32 Antenna Array support Beam-forming
Operating Conditions
Voltage
5V
Currency
2A
Operating Temperature
0~40℃
℃
Connector
Micro USB Connector
Display
Resolution
Support 480p/60Hz to 1080p/60Hz
Video Format
RGB: 4:4:4
YCbCr: 4:4:4
Audio
Channel
2~8
Sample Rate
32-192kHz
RF Specifications
57~66GHz
Frequency Range
HRP: OFDM with QPSK , 16-QAM
Modulation
LRP: OFDM with BPSK
Occupied Bandwidth
HRP:1.76Ghz
LRP: 92Mhz
HRP: TBD
Output Power
LRP: TBD
HRP: TBD
Receive Sensitivity
LRP: TBD
HRP: Up to 3.807 Gb/s
Data Rates
LRP: Omni-directional mode Up to 10.168 Mb/s
Indoor: 10 m
Operating Range
(The transmission speed may vary according to the
environment)
DTCP: AES-128 CTR mode
Security
HDCP 2.0
Operation & Storage Environment
Operating temperature: 0 ~ 45℃
℃
Temperature
Storage temperature: -10 ~ 60℃
℃
Operating Humidity: 20 ~ 80 %RH
Humidity
Storage Humidity: 10 ~ 90 %RH
Operating Altitude: ~7500ft (2286m) (760hpa)
Air pressure
Storage Altitude: ~20000ft (6096m) (468hpa)
1.5 LED Indication
LED indicator
Color
Status
Condition
Green
On
Off
Power On
Power off
Orange
ON
OFF
Connected
Not connected
Power
Link
1.6 Connectors and end-user interfaces
Item
Function
10-pin connector
For upgrading firmware usage
DC Jack
For power supply
HDMI Type A connector
For HDMI input or output
Main Power Switch
Switch between power on and power off
Push Button
For setup application
2 Installation Steps
1. Remove the WirelessHD products and accessories from package
2. Connect the power adapter to the WirelessHD product and power outlet.
Connect to power outlet via power adaptor
3. Connect HDMI connector on AW-WH036T to media source such as BD Player and
connect HDMI connector on AW-WH036R to flat panel display such as LCD TV by
HDMI cable.
AW-WH036T’s HDMI connector to media
source and AW-WH036R’s HDMI connector
to flat panel display by HDMI cables
4. Turn on power switch to be “on” status.
Switch to “On” status
5. Make sure that “
” in front side of WirelessHD product is “On”
6. After 10 ~ 30 seconds auto-connection, the orange LED will be “On”. it means that
the products begin working.
3 Important Notice
The Power adapter must be 5A / 2A.
The WirelessHD products are only for indoor use, the transmitting distance is
suggested to be less than 10 meters and no blocks between TX and RX.
Always check the LED lights for troubleshooting.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : 
Create Date                     : 2011:07:26 15:48:49+08:00
Modify Date                     : 2011:07:26 16:19:08+08:00
Subject                         : 
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : GPL Ghostscript  9.0
Keywords                        : 
Creator Tool                    : PDFCreator Version 1.1.0
Metadata Date                   : 2011:07:26 16:19:08+08:00
Document ID                     : 36298cf9-b9b7-11e0-0000-984494469fb2
Instance ID                     : uuid:e251ab70-8b69-4580-8f2f-05967a15ee10
Format                          : application/pdf
Title                           : TX_User's_Manual_0726modified
Creator                         : 
Description                     : 
Description (x-repair)          : 
Page Count                      : 10

EXIF Metadata provided by EXIF.tools