BALOGH LMB-7013 Compact Reader for Tag Identification User Manual Appendix 1 General presentation

Download:
Mirror Download [FCC.gov]
Document ID	295924
Application ID	LV4LVN+rf/4WtYuM/LPYHQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.29kB (328624 bits)
Date Submitted	2003-01-15 00:00:00
Date Available	2003-01-15 00:00:00
Creation Date	2002-10-03 17:44:59
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2002-10-03 17:45:43
Document Title	Appendix 1 : General presentation

HYPER X PRODUCT
ENHANCED COMPACT READER
LMB_6000 and LMB_7000
INSTALLATION MANUAL
Rédigé par / Written by
: Philippe GOBRECHT
Date
Signature
Approuvé par / Approved by : Bruno WIEDEMANN
Date
Signature
Autorisé par / Authorized by : Philippe GOBRECHT
Date
Signature /
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
1/27
EVOLUTIONS SUCCESSIVES /SUCCESSIVE CHANGES
INDICE /
REVISION
INDEX
DATE
MODIFIE PAR /
CHANGED BY
OBJET /
DESCRIPTION
06/2001
Ph. GOBRECHT
Création
09/2002
Ph. GOBRECHT
Addition of FCC notice and CE Notice
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
2/27
TABLE OF CONTENTS
1.
FUNCTIONS AND PERFORMANCE ..................................................................................................................... 4
2.
TECHNICAL CHARACTERISTICS....................................................................................................................... 5
3.
THE POWER SUPPLY.............................................................................................................................................. 6
4.
VERIFICATION OF THE READER ....................................................................................................................... 7
5.
INSTALLATION ........................................................................................................................................................ 8
5.1.
5.2.
5.3.
LMB_6010 FAMILY ............................................................................................................................................. 8
LMB_6030 FAMILY ............................................................................................................................................ 8
LMB_7000 FAMILY ............................................................................................................................................. 8
6.
EXTERNAL CONNECTIONS.................................................................................................................................. 9
7.
INSTALLATION AND CONNECTION PROCEDURES FOR THE ASYNCHRONOUS LINKS................. 11
7.1.
7.2.
7.3.
7.4.
CABLE TO BE USED FOR SERIAL LINK RS422 OR RS485 ..................................................................................... 11
LINE TERMINATION ............................................................................................................................................ 11
ELECTRICAL CONNECTIONS ................................................................................................................................ 11
NETWORKING ..................................................................................................................................................... 11
8.
OPEN COLLECTOR INTERFACE....................................................................................................................... 13
9.
THE OUTPUTS (JR3).............................................................................................................................................. 15
10.
THE INPUTS (JR4) ............................................................................................................................................. 16
11.
OPERATING FREQUENCY CHANNEL......................................................................................................... 17
12.
ADJUSTMENT OF THE READING RANGE ................................................................................................. 18
12.1.
12.2.
13.
1.
14.
VERIFICATION OF THE THE POSITION OF THE ADJUSTMENT OF THE READING RANGE : ........................................ 18
MODIFICATION OF THE POSITION OF THE READING RANGE : ............................................................................... 18
ORIENTATION OF THE ANTENNA .............................................................................................................. 19
FCC NOTICE............................................................................................................................................................ 20
CE NOTICE ......................................................................................................................................................... 21
APPENDIX 1 : GENERAL PRESENTATION .............................................................................................................. 22
APPENDIX 2 : SERIAL LINK ........................................................................................................................................ 23
APPENDIX 3 : OPEN COLLECTOR OUTPUT ........................................................................................................... 24
APPENDIX 3 : OPEN COLLECTOR OUTPUT ............................................................................................................ 25
APPENDIX 4 : INPUTS / OUTPUTS............................................................................................................................... 26
APPENDIX 4 : INPUTS / OUTPUTS............................................................................................................................... 27
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
3/27
1.
FUNCTIONS AND PERFORMANCE
Hyper X system uses a reader which emits a microwave signal to an identification area . The range of
this identification area varies from a few centimeters to several meters. When a tag enters this zone, it
modulates this radiation, thereby sending its code back to the reader, which then processes the
received signal and extracts the code.
The LMB reader contains all the functional parts of the reading unit. For the LMB_6000 readers, the
antenna is integrated inside the reader. The LMB_7000 readers use an external monolithic antenna
such as AT1, AT2, AT3 or AT5.
The principal functions are :
• Reading distance from 2 to 8m depending on model
• Reading distance adjustment by selection of 3 positions.
• Directivity of the microwave signal :
- Identification relatively insensitive to environment
- Adjustable beam
- Installation of reading antenna against metal walls without range reduction
• Simultaneous identification of 5 tags in 1 second
- Several tags can be present in identification zone, intentionally or not
- Identification of the tag in all positions : recto/verso ; horizontal/vertical
• Coexistence of several readers in same area : 31 in Europe and 119 in US
Precautions:
- Metallic surfaces or persons coming between tags and the reading antennas create shadow zones
in the identification area.
- The proximity of a tag to a metallic surface or a person (<5mm) reduces the reading distance.
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
4/27
2.
TECHNICAL CHARACTERISTICS
Operating temperature
Storage temperature
Relative humidity
Protection level
Power supply
Frequency band
Number of reading channels
Data rate
Error Detection
Code error rate
Reading failure rate
Reading adjustment
-20°C to +70°C
-25°C to +80°C
90% without condensation
IP40 or IP56 with waterproof case
12 Vdc to 24Vdc- 12W
2,450 GHz
31 for Europe or 119 for US
30 000 bauds
HDLC
1 E-7
1 E-4 (normal conditions of use)
3 positions
LMB_6012 LMB_6013 LMB_6033 LMB_6034* LMB_6035*
Dimensions in mm 263x178x32 263x178x32 297x297x85 297x297x85 297x297x85
Weight
1,5kg
1,5 kg
5,2kg
5,2kg
5,2kg
EIRP
10mW
75mW
75mW
200mW
350mW
Range
2m
3m
5m
5m
5m
internal
internal
internal
internal
internal
Directivity
90° x 90°
90° x 90°
45° x 45°
45° x 45°
45° x 45°
Waterproof case
Optional
Optional
Yes
Yes
Yes
Antenna
LMB_7012 LMB_7013 LMB_7023 LMB_7033
Dimensions
297x297x85 297x297x85 297x297x85 297x297x85
in mm
Weight
5,2kg
5,2kg
5,2kg
5,2kg
EIRP
10mW
75mW
75mW
75mW
Range
2m
3m
5m
5m
Antenna
External AT1 External AT1 External AT2 External AT3
Directivity
90° x 90°
90° x 90°
45° x 45°
45° x 45°
Waterproof
case
Yes
Yes
Yes
Yes
* : not available in US
EIRP :Equivalent Isotropic Radiated Power
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
5/27
3.
THE POWER SUPPLY
The reader supply must be between 12Vdc and 24Vdc.
With 12Vdc, the current is less than 1A
With 24Vdc, the current is less than 0.6A
The extreme limits for the power supply are 11Vdc to 28Vdc : it’s very important to respect these
limits for correct operation of the readers and to avoid damage.
A led « low voltage », near the power supply connector, indicates the voltage supply is less than
11Vdc.
At the time of the “low voltage” detection, the reader enables a timer of about twenty seconds. After
this time, the reader tries to power on. If the voltage is right, the reader will turn on, if the voltage is
still too low, it enables the timer again and so one.
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
6/27
4.
VERIFICATION OF THE READER
This verification is made during the powering on of the reader with all the interfaces and the
inouts/Outputs disconnected.
General state
Bi-color indicator
DN02
Indicator
Low voltage
DT06
State of
TTL link
DR09
State of Inputs and Outputs
DR03 DR04 DR05 DR06
TTL link
RS link
JR02
JR01
1 2 3 4 5
1 2 3 4 5
JT01
JK01
JR04
1 2 3
1 2 3 4
Inputs
State of serial link
DR07 DR08
JR03
1 2 3 4 5 6
Outputs
Buzzer
Displays
UN17 - UN18
We can sume the successive states :
Phase 1 :
• Buzzer emits a bip during 1s
• Indicator light DR09 red on during 4s
• Displays UN17 and UN18 with “P1” during 4s
• Bi-color Indicator light DN02 red on during 5s
Phase 2:
• Displays UN17 and UN18 with “PE” during 1s
Phase 3 :
• Displays UN17 and UN18 off
• Bi-color Indicator light blinks green 0,5s on and 0,5s off.
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
7/27
5.
INSTALLATION
5.1.
LMB_6010 family
The reader is made of a solid aluminium cast on which the circuits boards are fixed and a plastic
radome fixed with two screws.
To open the reader :
- Unscrew and remove the two screws at each end of the reader
- Remove the radome
The reader must be mounted on a support (wall...) with 4 screws (maximum diameter is 6mm) at the
corners of a rectangle of 151 x 241 mm.
The procedure for closing the reader is the reverse of that for opening.
5.2.
LMB_6030 family
The LMB_6030 family uses the same base as the LMB_6010, but has a different antenna and a
waterproof case.
To open the reader :
- Remove the black plastic bushings located in the 4 angles of the grey waterproof case.
- Use the special tool and turn the 4 locking gear ( ¼ of turn)
- Remove the plastic cover of the waterproof case.
5.3.
LMB_7000 family
The LMB_7000 family uses the same base as the LMB_6010 with an external monolithic antenna and
a waterproof case.
To open the reader :
- Remove the black plastic bushings located in the 4 angles of the grey waterproof case.
- Use the special tool and turn the 4 locking gear ( ¼ of turn)
- Remove the plastic cover of the waterproof case.
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
8/27
6.
EXTERNAL CONNECTIONS
Red push
Select/Save
Black push
Display/Change
bi-color Led
Black push
Reset
Led “ low
Voltage”
TTL Link
JK01
1 2 3
RS Link
JR02
JT01
JR04
JR03
JR01
1 2 3 4 5 1 2 3 4 5
1 2 34 1 2 3 4 56
In
Out
JK01
Display
Analog
measurement
Pin
Buzzer
JR01
Pin Name RS-232 RS-422
O1
TX
TX+
O2
-TX3
O3
-RX+
O4
RX
RX5
GND
GND GND
Nom
Ch I
GND
ChQ
RS485
+V
-V
--GND
JR02
JT01
Pin
Power supply 12Vdc to 24Vdc
Connector with 2 points
Pin
Name
Valim
0V
Nom
ISO2
WIEGAND
DATA “1”
OC1
STROBE
DATA”0”
OC2
MDATA
-OC3 PRES BADGE
Valim
Valim
Valim
GND
GND
GND
consumption
1 A max / 12Vdc.
Voltage input (Valim) between
11Vdc min and
28Vdc max.
The red and black push buttons are used to configure the reader :
The procedure to display or change parameters is :
☞
1- select the function : red push-button
Select
☞
2- display the function : red push button
Change
☞
3- save the parameter : red push-button
Save
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
9/27
JK01 is a connector to measure the analog signal receive by the reader. These test points allow
measuring the noise with a scope and therefore the quality of the electromagnetic environment for the
installation. These test points allow measuring the analog signals from the tag.
JT01 : is the connector for the supply voltage. A female connector with screw (Phoenix with 2 points
pitch 5.08mm ref. MSTB 2,5/2-ST-5,08) must be used.
JR01 : is the connector for the open collector output . A female connector with screw (Phoenix with 5
points pitch 5.08mm ref. MSTB 2,5/5-ST-5,08) must be used.
JR02 : is the connector for the serial link (RS) . A female connector with screw (Phoenix with 5
points pitch 5.08mm ref. MSTB 2,5/5-ST-5,08) must be used.
JR03 : is the connector for the outputs . A female connector with screw (Phoenix with 6 points pitch
3.81mm ref. MSTB 1,5/6-ST-3,81) must be used.
JR04 : is the connector for the inputs . A female connector with screw (Phoenix with 4 points pitch
3.81mm ref. MSTB 1,5/4-ST-3,81) must be used.
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
10/27
7.
INSTALLATION AND CONNECTION PROCEDURES FOR THE
ASYNCHRONOUS LINKS
7.1.
Cable to be used for serial link RS422 or RS485
1. In a "clean" electromagnetic environment - twisted pairs, without screen.
2. In a "noisy" electromagnetic environment - twisted pairs, individual screen for each pair
The cables are electrically characterised by :
- characteristic impédance (Z0 in ohms)
- distributed capacity (CL in pF/m).
- distributed resistance (RL in ohms/m)
For short cable lengths, normal cables are satisfactory.
For cable lengths greater than 1000 metres, high quality cables (low CL and RL) should be used for all
baud rates.
7.2.
Line termination
For a simplex link, the termination (if present) should be placed at the receiving end of the line.
For a duplex link, the termination (if present) should be placed at the each end of the line.
For baud rates less than 1200 bauds, no termination is necessary. For baud rates greater than 9600
bauds and line lengths greater than 1000 metres, a resistor equal to the line impedance (120 ohms) is
usually necessary. For cases in-between, there is no clear-cut rule and depends on individual
installations (combination of baud-rate, line-length, cable quality, emitter/receiver characteristics).
7.3.
Electrical connections
For an RS-232 link , wiring up is straightforward, the TX and RX lines of both equipments are
connected together.
For a differential link (RS-422 or RS-485), the polarities are not always clearly defined. Normally the
“+” line is at a high level at rest and is active low. For the “-” line, the opposite is true. This is the
case for the differential interface for the HYPERX readers. However if the differential signals are
generated by a converter acting on RS-232 signals, then the “+” line can be at a low level at rest and
active high. In this case, the “+” line of one equipment must be connected to the “-” line of the other
equipment.
Connection of 0V
Whether this is necessary or not, depends on the installation. If host and reader are distant with
different local ground potentials, then an RS-232 link may not work if the 0V references are not
connected. However connecting them will cause ground currents to circulate. In general, for large link
lengths, a differential link should be used. This also tolerates a large common-mode voltage
difference.
7.4.
Networking
7.4.1.
Topology
The preferred topology is the bus.
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
11/27
Simplex wiring diagram:
R : line-matching resistor,
added if needed
Half-duplex wiring diagram:
R : line-matching resistors,
added if needed
The length of the derivation should be as short as possible (< 30 cm).
The maximum length allowed can be calculated from the cable characteristics using the equation
below.
L < 1300 / (Z0 x CL) L in metres, ZO in ohms and CL in pF
7.4.2.
Line biasing
For RS-485, line biasing may prove necessary and must be done externally and only at one point on
the line.
The line “+” is connected to +5V via a 4K7 resistor.
The line “-” is connected to 0V via a 4K7 resistor.
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
12/27
8.
OPEN COLLECTOR INTERFACE
Both the ISO2 and the WIEGAND interfaces use an Open-collector interface. For correct operation,
pull-up resistors (typical values are 1K) must be connected to any voltage supply between 5V and
12V. For the ISO2 interface, this concerns the three signals STROBE, MDATA and PRES_BADGE,
for the WIEGAND interface this concerns the two signals DATA1 and DATA0.
The pins are associated with different signals, depending on the type of link used. The JR2 connector
is used.
pin
ISO2
WIEGAND
STROBE
DATA “1”
MDATA
DATA “0”
PRES_BADGE
—
Valim
Valim
GND
GND
Note : the Valim on pin 4 is internally connected to the supply voltage.
Circuit diagram for open collector output stage inside the reader :
VCC
33K
uP
Langue/ Language
FR
10K
CTP
12V
10n
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
13/27
For the ISO2 system :
5 - 12 VDC
1K
HYPERX
READER
O1
CLOCK
O2
DATA
O3
PRES_BADGE
USER
EQUIPMENT
O5
0V
For Wiegand system :
5 - 12 VDC
1K
O1
DATA1
O2
DATA0
HYPERX
READER
USER
EQUIPMENT
O5
0V
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
14/27
9.
THE OUTPUTS (JR3)
pin
name
VI1
SIC1
SIE1
VI2
SIC2
SIE2
description
Supply voltage for output 1
Collector output 1
Emitter output 1
Supply voltage for output 2
Collector output 2
Emitter output 2
Détec te ur LMB
Ve xt < 24Vdc
Ve xt (or Valim
pin 4 of
JR02)
1 k oh ms
Rext
SIC
10 0 o hm s
O p to
c oup le u r
S ortie
10ko h m s
le d
jaune
SIE
GND
The external voltage must not exceed 24Vdc
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
15/27
10.
THE INPUTS (JR4)
pin
name
EI1
GND1
EI2
GND2
description
Signal for input 1
Reference for input 1
Signal for input 2
Reference for input 1
EI must not exceed 24Vdc.
EI < 24Vdc
Détecteur LMB
10kohms
1kohms
Opto
coupleur
JR04 Pin
EI
Nom
EI 1
GND 1
EI 2
GND 2
Entrée 1 1
Entrée 2
1kohms
led
jaune
GND
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
16/27
11.
OPERATING FREQUENCY CHANNEL
The enhanced compact reader LMB can operate using 119 different channels (31 for Europe). Each
channel corresponds to a separate microwave frequency band. This is useful when several readers
must be positioned close together. Using different channels on each reader eliminates mutual
interference.
119 channels are available (31 for Europe), the frequency band is between 2435.25MHz and
2464.75MHz (2446.25MHz and 2453.75MHz for Europe) with a channel spacing of 250KHz.
Checking the channel number :
Push the red push-button "select" until the "nC" is displayed.
Then push the black button once : the channel number appears.
Numéro de canal
1 à 31
☞
☞
Display
☞
31
Display
Select
After 2 or 3 seconds, the display switches off automatically.
Modifying the channel number :
Push the red button "select" until "nC" is displayed.
Then push the black button "change" until the wanted channel number appears.
When the channel number is right, push the red button "save" once to save the new channel number.
Numéro de canal
1 à 31
☞
FR
☞
Change
31
Select
Langue/ Language
☞
Change
☞
Save
☞
Save
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
17/27
12.
ADJUSTMENT OF THE READING RANGE
All the readers are deliver with an adjustment with the maximum reading range.
There are 4 positions for the adjustment :
• Maximum reading range
• Middle reading range
• Minimum reading range
• A few centimers.
12.1.
Verification of the the position of the adjustment of the reading range :
Push the red push-button "select" until the "Pr" is displayed.
Then push the black button “display” once : the number corresponding to the reading range appears.
qques cm
☞ ☞ ☞ ☞
Réglage Portée
☞
Display
mini
Select
Display
moyenne
Display
maxi
Display
The displays light off automatically after 2s.
12.2.
Modification of the position of the reading range :
Push the red push-button "select" until the "Pr" is displayed.
Then push the black button “change” once : the number corresponding to the reading range appears.
Push the black push-button "change" until the wanted position number appears.
When the position number is right, push the red button "save" once to save the new position number.
The new position number is memorised.
☞
Change
mini
Select
Change
moyenne
Change
☞ ☞ ☞ ☞
qques cm
☞ ☞ ☞ ☞
Réglage Portée
Save
Save
Save
maxi
Change
Save
The displays light off automatically after 2s.
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
18/27
13.
ORIENTATION OF THE ANTENNA
LMB_6012
LMB_7012
90°x 90°
LMB_6013
LMB_7013
90°x 90°
LMB_7023
90°x 45°
LMB_6033
LMB_7033
45° x45°
LMB_6034
45° x45°
LMB_6035
45° x45°
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
19/27
1. FCC Notice
This equipment has been tested and found to comply with the limits for a classB digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If the equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
• Reorient or relocate the receiving antenna.
• increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician for help.
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
20/27
14.
CE Notice
0682
DECLARATION OF CONFORMITY
BALOGH Toulouse
105 Avenue du Général Eisenhower
31023 TOULOUSE cedex 1
FRANCE
This declaration that the following designated products LMB* comply with the essential protection
requirements of R&TTE Directive 1999/5/CE on the approximation of the law of the Member States
relating to Radio Spectrum Matters, EMC and Electrical safety.
This declaration applies to all specimens manufactured with the attached technical documentation
described in the annex II of the directive which form parts of the declaration.
Assessment of compliance of the product with the requirements relating to the essential requirements
acc. to Article 3 R&TTE was based on AnnexeV of the Directive 1999/5/CE and the following
standards :
Radio spectrum
EMC
Electrical safety
Health
: EN 300 440
: EN 401 489
: EN 60 950
: EN 50 371
* : LMB_6012/6013/6033/6034/6035/7012/7013/7023/7033
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
21/27
Appendix 1 : General presentation
HYP ER X
ENHANCED COMPACT READER : LMB
Red push-button
Se lect/Sa ve
Bla ck pus h-button
Displa y/Change
Bi-color led
Bla ck push-button
Rese t
Low vo lta g e
le d
TTL link
JR02
JK01 JT01
123
JR04
J R03
RS link
JR01
1 2 3 4 51 2 3 4 5
12 34 1234 56
Inputs
Outputs
JK01
Buz z e r
Display
An a lo g
m e a s ur em e n t
JR01 : seria l link
Pin Na me RS -2 32 RS -4 22 R S4 85
O1
TX +
TX
+V
O2
TX -V
-O3
RX +
-3
-O4
RX -4
RX
G ND
G ND G ND
G ND
Pin Na me
1 I
2 G ND
3 Q
JR02 : open colle ctor output
JT01
Pin
S u pp ly vol ta g e 12 Vdc t o 2 4Vd c
C on ne c t or w ith 2 p oin t s
Pi n Na me
+ Va lim
0V
Nam e
WI E G AN D
IS O2
DATA “1”
OC1
STRO BE
OC2
MDATA
DATA”0”
-OC3 PRE S BADG E
Vali m
Va lim
Vali m
GND
GN D
G ND
S up pl y c u rr e n t
1 A m a x / 12 Vdc .
In pu t vo lt a g e
Va l im b e t we e n
11Vd c m in a nd
28 Vd c m a x.
T h e re d a n d blac k
b utto n s are u s e d to c o n fig u re th e rea d e r
Th e p ro c e dure t o d is play o r c h a n g e p a ram e te rs is :
☞
1- s ele ct th e fu nct io n : re d pus h -b utto n
Se le ct
☞
2 - dis pla y/c h ang e th e p ara me te r : blac k p u s h-b u t to n
Ch a n ge
☞
3 - s av e th e p a ra met er : re d p u s h- butto n
Sa v e
Do c u m e n t re f. 6 0 0 0 X0 0 X0 1
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
22/27
Appendix 2 : Serial link
SERIAL LINK : RS-232
RS232
Hyper X
JR01 Reader
PC
COM port
subD9
JR01
RS232
RX
TX
HYPER X 3
READER
PC
RX
TX 3
GND 5
GND
SERIAL LINK : RS-422
RS-422
JR01
PC
Hyper X
Reader
JR01
1 TX+
TX2
HYPER X
RX+
READER 3
RX4
RS-422
RX+
RXTX+
TX-
PC
GND
Document ref. 6000X00X01
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
23/27
CONFIGUR ATION o f EN HANCED COMPAC T REA DER : LMB
AS YNCHRONU S S ER IA L LINK : RS 2 3 2 / 4 2 2 / 4 8 5
Pl e as e s ee the c on fig uratio n manual to get a d e tail e d l is t of all p os s i ble c o nfi gu ration s
☞
1- s e le ct th e fu n c ti o n : red pu s h -b u t to n
OP E RAT IN G MO DE
Se le ct
R e d a n d b la c k p u s h -b u t to n s are
us e d to c o n f ig u re th e re a d e r.
Th e p ro c e d u re to d i s p l a y o r c h a n g e
pa ram e te rs i s :
☞
2 - d i s pla y/ c han g e the p ara m et e r : b lac k p us h -b utto n
☞
3 - s a ve th e p ara m ete r : red pus h -bu tto n
Ch ange
Sa v e
RS i n t e rfa c e
R S 232
☞
☞
C ha n ge
☞
R S 422
S e le c t
☞
☞
☞
☞
☞
☞
31
B au d ra te
9 600
☞
4 800
S e le c t
☞
1 200
19 200
☞
Inte rrupt .
☞
P olling
disa ble d
1st code
Se le ct
☞
☞
Ch a n ne l n u mb er
1 to 3 1
☞
Sa v e
☞
31
☞
☞
Re ade r ra ng e
few cm
☞
8/ none
☞
☞
C ha n ge
☞
7 / e ve n
S e le c t
☞
7 / odd
s hort
Se le ct
☞
m e dium
Sa v e
☞
C ha n ge
long
Sa v e
DE FAULT CONFIGURATION
☞
Sa v e
☞
☞
S a ve
☞
☞
S a ve
☞
☞
S a ve
☞
Ch a n g e
S a ve
☞
☞
C h an g e
Re s e t
- Mes s a g e mo de : 0
- Bu z zer : O N
- Dis t. c o d e filte r : dis ab le d
- C ha nn e l nu mb e r : 9
- R ea de r ra n ge : 3
- Int e rfa ce : R S 2 32
- J -B US Ad re s s : 1
- Ba ud ra te : 1 9 2 00 ba ud s
- P r otoc o l : P o llin g
- Cha ra c t e r fo rm a t : 8 / no ne
- F ra m e fo rm a t : J -B US
Sa v e
☞
Ch a n g e
☞
S a ve
☞
Ch a n g e
☞
C ha n ge
☞
☞
Sa v e
S a ve
☞
Ch a n g e
Ch a rac te r
F o rma t
S a ve
☞
Ch a n g e
Sa v e
Sa v e
☞
Ch a n g e
S e le ct
Sa v e
☞
Ch a n g e
Sa v e
S a ve
☞
Ch a n g e
EEP ROM
S a ve
☞
Ch a n g e
☞
☞
C ha n ge
S e le c t
Dis tri b uto r c o de
fi l te r
Sa v e
☞
☞
Ch a n g e
☞
C ha n ge
☞
ON
S e le ct
Sa v e
C ha n ge
P o l li n g /
In te rru p t
☞
S a ve
☞
Ch a n g e
Sa v e
C ha n ge
☞
OF F
☞
C ha n ge
☞
B u zzer
Sa v e
☞
☞
Ch a n g e
Sa v e
☞
☞
Ch a n g e
☞
C ha n ge
☞
Se le ct
Sa v e
C ha n ge
S e le c t
☞
☞
C ha n ge
☞
Ch a n g e
Sa v e
C ha n ge
J -B U S Ad re s s
1 to 3 1
Sa v e
C ha n ge
R S 485
Me s s a g e m o de
- O ut p ut 1 : re a d in g 1 00 m s
- O ut p ut 2 : re a d in g 2 s
- Inp u t 1 : Dis a b le d
- Inp u t 2 : Dis a b le d
- Inte rfa c e TTL : n ot u s e d
- Log : a ll (3 )
Doc ument re f. 6000X00X01
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
24/27
Appendix 3 : Open collector output
Connection to a WIEGAND system
+5 to +12 Vdc
JR02
1K
1K
DATA1
DATA0
User
Equipement
HYPER X 3
READER
GND
Connection to an ISO2 system
+5 to +12 Vdc
JR02
HYPER X
READER
1K
1K
1K
STROBE
MDATA
PRES-BADGE
User
Equipement
GND
The use of the third wire (PRESBADGE) is optional
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
25/27
CONFIGURATION OF EN HANCED COMPAC T REA DER : LMB
OP EN COLLEC TOR INTERFACE WIE GA ND AND IS O 2
Pl e as e s e e th e c o nfi gurati on manual to g e t a de taile d li s t o f al l po s s ib le con fig uratio ns
☞
1- s ele c t the fu nctio n : re d p u s h -b u tto n
O P E RATING MODE
Se le ct
Re d an d b l a c k p u s h -b u tto ns a re
u s e d t o c o n f ig u re th e re a d e r.
Th e pro c e d u re t o d is p l ay o r c ha ng e
p a ram e te rs i s :
☞
2 - d is pl a y /c han g e th e p ara m e te r : b l ac k p u s h -b u tto n
☞
3- s a ve th e pa ram e te r : red p u s h -b utto n
C ha nge
S a ve
Op en c o ll e c t o rs
in t e rf ac e
no t us e d
☞
☞
C ha ng e
☞
IS O 2 fixe d
☞
IS O 2 Va r.
☞
☞
☞
☞
☞
☞
S a ve
☞
Cha n g e
Se le ct
☞
Sa ve
☞
S a ve
☞
Cha n g e
☞
C ha ng e
☞
Cha n g e
Sa ve
C ha ng e
WIE GAND
Sa ve
C ha ng e
S e le c t
Me s s a g e m o de
Bu z z e r
Sa ve
OFF
☞
S a ve
☞
Cha n g e
MTB M
Me an Ti m e
B e tw e e n
Me s s ag e s
☞
0, 5 s
☞
C ha ng e
☞
1s
Sa ve
☞
2s
S e le c t
C ha ng e
☞
5s
☞
☞
☞
0, 1 s
☞
0, 5 s
Sa ve
☞
1s
2s
☞
☞
10 s
☞
☞
☞
S a ve
☞
☞
S a ve
☞
☞
Sa ve
☞
Cha n g e
fe w c m
☞
Sa ve
☞
Cha n g e
☞
s hort
m edium
☞
☞
S a ve
☞
Cha n g e
Se le ct
Sa ve
☞
S a ve
☞
Cha n g e
Sa ve
lo ng
☞
☞
S a ve
☞
Cha n g e
S a ve
Sa ve
DEFAULT CONFIGURATION
☞
☞
Ch a n g e
Re se t
- M es s a ge mod e : 0
- Buz z e r : ON
- Di s t. c o de fil te r : d is a b l e d
- C h an n e l n um b e r : 9
- R e ad e r ra ng e : 3m
- In t e rfa c e : R S 23 2
- J -BUS Adr e s s : 1
- B a u d r a te : 19 20 0 b a u ds
- P ro to c o l : P ol lin g
- C h a r a c t e r form a t : 8 / n o ne
- F r a m e form a t : J -B US
31
Re ad e r ra n g e
Sa ve
C ha ng e
☞
S a ve
Cha n g e
S e le ct
☞
C ha ng e
☞
Cha n g e
☞
C ha ng e
5s
1st c ode
Ch a n ne l nu mb er
1 to 3 1
Sa ve
C ha ng e
☞
☞
Sa ve
Cha n g e
☞
C ha ng e
S e le c t
☞
Cha n g e
EEPR OM
Sa ve
C ha ng e
☞
dis a ble d
☞
☞
☞
Cha n g e
Se le ct
Sa ve
C ha ng e
Ho ld ti m e
☞
Sa ve
C ha ng e
10 s
D is tribu to r
c o de filte r
Sa ve
☞
ON
S e le ct
☞
C ha ng e
☞
☞
Sa ve
- O ut pu t 1 : re a d i ng 1 0 0m s
- O ut pu t 2 : re a d i ng 2 s
- In p ut 1 : Dis a b le d
- In p ut 2 : Dis a b le d
- In ter fa c e TT L : no t u s e d
- Lo g : all (3)
Doc umen t re f. 60 00X00X01
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
26/27
Appendix 4 : Inputs / Outputs
HYP ER X
ENHANCED COMPACT READER : LMB
Co nfig u ra tio n o f OUTP UTS : c o n n e c to r JR 0 3
JR03
P in
O u tp u t 1 2
O u tp u t 2 5
N a me
VI 1
S IC 1
S IE 1
VI 2
S IC 2
S IE 2
Ou tp u t 1
Not used
☞
Ch a ng e
☞
re a d. 100ms
S e lec t
LMB R e a d er
VI
hos t
Ou put 2
S IC
☞
Sa ve
☞
☞
Sa ve
☞
Ch a ng e
Re x t
10 0 oh ms
☞
Ch a ng e
Ve x t < 24 Vd c
Ve x t (o r Va lim
pin 4 o f
J R02 )
1 ko h m s
☞
Sa ve
Ch a ng e
rea ding. 2 s
Op to
co u p le u r
☞
Not used
☞
Sa ve
☞
Ch a ng e
O u tp u t
1 0 koh m s
☞
re a d. 100ms
☞
Ch a ng e
S e lec t
Ye l l o w
le d
☞
Sa ve
rea ding. 2 s
☞
Sa ve
☞
Ch a ng e
S IE
GND
hos t
☞
Sa ve
☞
Ch a ng e
Sa ve
Co nfig u ra tio n o f INPUTS : c o nn e c to r J R 0 4
JR04
In p u t 1
In p u t 2
P in
Name
EI 1
G ND 1
EI 2
G ND 2
In p ut 1
Disa ble d
☞
Re ading
In p ut 2
1 koh m s
Op to
co u p le u r
EI
1k o hms
☞
Sa ve
☞
Ch a ng e
EI < 2 4Vd c
LMB R e a d e r
☞
Ch a ng e
S e lec t
1 0 ko h m s
☞
Disa ble d
☞
Sa ve
☞
Ch a ng e
☞
Re ading
S e lec t
Ye ll o w
le d
☞
Sa ve
☞
Ch a ng e
Sa ve
G ND
Docum e nt re f. 6000X00X01
Langue/ Language
FR
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Numéro / Number
Code Doc. / Doc. Code
Indice / Revision Index
13053
108
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
Pages
27/27

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Producer                        : Acrobat Distiller 4.05 for Windows
Creator                         : 
Modify Date                     : 2002:10:03 17:45:43+02:00
Title                           : .Appendix 1 :  General presentation .
Create Date                     : 2002:10:03 17:44:59
Page Count                      : 27
Page Mode                       : UseNone

EXIF Metadata provided by EXIF.tools