BARTEC HFG1 RFID Reader User Manual MC92N0ex FCC Manual 20131112x

BARTEC RFID Reader MC92N0ex FCC Manual 20131112x

user manual

BARTEC GmbH Contact: Max-Eyth-Straße 16 Tel.: +49 7931 597-0 Service-mobilecomputing@bartec.de 97980 Bad Mergentheim Fax: +49 7931 597-119 Download: Germany www.bartec.de/automation-download User Manual - TRANSLATION Mobile Computer MC 92N0ex Serie Type 17-A1A3-…./……. Type B7-A2A.-…./……. ATEX/IECEx Zone 1 ATEX Zone 2 / 22 UL Class I, II Division 1 UL Class I, II Division 2 UL Class III ATEX/IECEx Zone 1 Document No.: 11-A1A2-7D0001 / 357929 Status: 12 November 2013 / Revision 0 Subject to technical changes! Content Page English 1 - 66
Table of content Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… 1.Basic security information 31.1Information on this User Manual ...................................................................... 31.1.1Languages ....................................................................................................... 41.1.2Changes in the document ................................................................................ 41.1.3Handling the product ....................................................................................... 41.2Intended use .................................................................................................... 41.2.1Exclusive purpose ........................................................................................... 41.2.2Unintended use ............................................................................................... 41.3Duties of the operator ...................................................................................... 51.4Safety information............................................................................................ 51.4.1General safety information .............................................................................. 51.5Maintenance .................................................................................................... 51.5.1Servicing .......................................................................................................... 51.5.2Inspection ........................................................................................................ 51.5.3Repairs ............................................................................................................ 61.5.4Commissioning ................................................................................................ 61.6Protection type, test certificate and standards ................................................. 61.7Warranty .......................................................................................................... 61.8Co-applicable documents – Set of documents ................................................ 81.9Configuration ................................................................................................... 92.Product description 102.1Definition MC92N0ex-IS Version .................................................................... 102.2Definition MC92N0ex-NI Version .................................................................... 112.3Operation ....................................................................................................... 123.Technical data 133.1Explosion protection IS .................................................................................. 133.2Explosion protection NI .................................................................................. 143.3Other applicable standards ............................................................................ 153.4Features ........................................................................................................ 163.4.1Performance features .................................................................................... 163.4.2Physical features ........................................................................................... 163.4.3User environment .......................................................................................... 183.4.4Application development ............................................................................... 183.4.5Voice and data transmission Wireless LAN ................................................... 193.4.6Voice and data transmission Wireless PAN .................................................. 203.4.7Headset ......................................................................................................... 203.4.8Data Captur Options ...................................................................................... 203.4.9Decodable barcode types .............................................................................. 233.4.10RFID Option .................................................................................................. 243.5Battery ........................................................................................................... 273.6External interfaces ......................................................................................... 283.7Product labelling ............................................................................................ 293.8Laser labels ................................................................................................... 314.Transport and storage 324.1Transport ....................................................................................................... 324.2Storage .......................................................................................................... 325.Commissioning 335.1Requirements in potentially explosive atmosphere ....................................... 345.2First steps ...................................................................................................... 355.3Structure ........................................................................................................ 355.4Handling accessories .................................................................................... 365.4.1Insert battery ................................................................................................. 375.4.2Change keypad ............................................................................................. 385.4.3Insert SD card ............................................................................................... 405.4.4Remove/replace screen protector ................................................................. 41
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Table of content Subject to technical changes. 04/2013 5.4.5Holster and cases .......................................................................................... 425.4.6Headset ......................................................................................................... 436.Operation 446.1Final inspection ............................................................................................. 446.2Handling ........................................................................................................ 446.3Operation recommendations and requirements ............................................ 456.3.1Basic safety and health protection requirements ........................................... 456.3.2Equipment of the laser devices ..................................................................... 486.3.3LED Devices .................................................................................................. 486.3.4Regulatory information for wireless devices .................................................. 486.4Electromagnetic fields ................................................................................... 526.4.1International ................................................................................................... 526.4.2Handheld devices .......................................................................................... 536.5Optimise operating times/change energy settings (WEH 6.5.3 only) ............. 546.5.1Automatic shutdown in the case of lengthy standby periods ......................... 546.5.2Change display backlight .............................................................................. 546.5.3Change keypad background lighting ............................................................ 556.5.4Switch off radio connections .......................................................................... 566.6Software versions .......................................................................................... 566.6.1OEM .............................................................................................................. 566.6.2Storage battery .............................................................................................. 576.6.3Bluetooth ....................................................................................................... 576.6.4“Fusion”software ............................................................................................ 587.Faults and troubleshooting 597.1Resetting the MC92N0ex ................................................................................ 597.1.1Windows Embedded Handheld and Windows CE Devices ........................... 597.1.2On a Windows CE 7.0 device ........................................................................ 607.1.3Warm boot ..................................................................................................... 607.1.4Cold Boot ....................................................................................................... 607.1.5On a Windows Embedded Handheld 6.5.3 device ........................................ 617.1.6Warm boot ..................................................................................................... 617.1.7Cold Boot ....................................................................................................... 617.1.8Clean Boot ..................................................................................................... 628.Service, inspection, repair 638.1Service intervals ............................................................................................ 638.2Inspection ...................................................................................................... 638.3Service and repair work ................................................................................. 638.3.1Information on sending in for repairs ............................................................. 639.Disposal 6410.Forwarding and packaging information 6411.Accessories 65
Subject to technical changes. 04/2013
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Table of content Subject to technical changes. 04/2013
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Product description Subject to technical changes. 04/2013 1. Basic security information 1.1 Information on this User Manual Read carefully before putting the devices into operation. The User Manual is a fixed part of the product. It must be kept in the direct vicinity of the device and the installation, operating and service staff must have access to it at all times. The User Manual contains important information, safety instructions and test certificates which are necessary for the perfect function of the device in operation. The User Manual is directed at all individuals concerned with the assembly, installation, commissioning and servicing of the product. The applicable guidelines and standards for areas with gas and dust atmosphere (99/92/EC, EN 60079-17, EN 60079-19, IEC 60079-17, IEC 60079-19) must be observed when conducting this work. Knowledge of the safety and warning information in this User Manual and the strict compliance with it is essential for safe installation and commissioning. Accidents, injuries and material damage can be avoided by circumspect handling and systematically following the instructions. The figures in this User Manual serve to illustrate the information and descriptions. They are not necessarily completely transferrable and may differ slightly from the actual execution of the device. Safety and warning information is particularly emphasised in this User Manual and marked by symbols. DANGERDANGER describes a directly imminent danger. If not avoided, death or severe injury will be the consequence. WARNING WARNING describes a possibly imminent danger. If not avoided, death or severe injury may be the consequence. CAUTION CAUTION describes a possibly imminent danger. If not avoided, mild or slight injury may be the consequence. ATTENTION ATTENTION describes a possibly damaging situation. If not avoided, the plant or objects in its vicinity may be damaged. Important information on effective, economic & environmentally compliant handling.
Product description Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 1.1.1 Languages The original User Manual is written in German. All other available languages are translations of the original User Manual. The User Manual is available in German and English. If further languages are required, these must be requested from BARTEC or stated on placing an order. 1.1.2 Changes in the document BARTEC reserves the right to change the content of this document without notification. No warranty is assumed for the correctness of the information. In cases of doubt, the German safety instructions apply because it is not possible to rule out errors of translation or printing. In the case of legal disputes, the “General Terms and Conditions of Business” of the BARTEC Group also apply. The current versions of the datasheets, operating instructions, certificates and EC declarations of conformity can be downloaded from www.bartec.de under Products and Solutions in the product area “Automation technology” or may be requested directly from BARTEC GmbH. 1.1.3 Handling the product The product described in this User Manual left the factory in a perfect and tested state in terms of safety. To maintain this state and to achieve a perfect and safe operation of this product, it may only be operated in the manner described by the manufacturer. In addition, the perfect and safe operation of this product requires correct transportation, proper storage and careful operation. The safe and perfect handling of the Mobile Computer is a prerequisite for its perfect and correct functioning. 1.2 Intended use 1.2.1 Exclusive purpose The Mobile Computer MC92N0ex is a handheld piece of electrical equipment. It serves the purpose of the mobile recording, processing and radio transmission of data within potentially explosive atmospheres. It is used exclusively in combination with devices which comply with the requirements placed on the overvoltage category I. The admissible operating data of the device used must be considered. 1.2.2 Unintended use Any other use is unintended and may lead to damage and accidents. The manufacturer shall not be liable for any use extending beyond the exclusive purpose.
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Product description Subject to technical changes. 04/2013 1.3 Duties of the operator The operator undertakes to only permit persons to work with the Mobile Computers who  are acquainted with the basic regulations on safety and accident prevention, and who have been inducted in the use of the Mobile Computer;  have read and understood the documentation, the safety chapter and the warnings. The operator checks that the safety and accident prevention regulations applicable to the respective case of use have been observed. 1.4 Safety information 1.4.1 General safety information  Do not dry wipe or clean devices in potentially explosive atmospheres!  Do not open devices in potentially explosive atmospheres.  General statutory provisions or guidelines on occupational health and safety, accident prevention provisions and environmental protection laws must be heeded, e.g. Operational Safety Ordinance (BetrSichV) and nationally applicable ordinances.  Use suitable clothing and shoes with respect to the danger of hazardous electrostatic charges.  Avoid heat influences outside the specified temperature range.  Protect device from external influences! Do not expose device to caustic/aggressive liquids, vapours or spray. In the case of malfunction or damaged enclosure, remove the device immediately from the potentially explosive atmosphere and bring it to a safe place. 1.5 Maintenance The pertinent erection and operating provisions for electrical systems must be observed! (e.g. Directive 99/92/EC, Directive 94/9/EC, BetrSichV and nationally applicable ordinances EN 60079-14 and the series DIN VDE 0100)! Observe the national waste disposal regulations when disposing of the devices. 1.5.1 Servicing No constant servicing will be necessary if operated correctly under consideration of the assembly instructions and environmental conditions. See Chapter “Service, inspection, repair” in this respect. 1.5.2 Inspection According to EN 60079-19 and EN 60079-17, the operator of electrical systems in potentially explosive atmospheres is obliged to have these inspected by an electrician to ensure correct condition.
Product description Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 1.5.3 Repairs Repairs to explosion-protected devices may only be performed by authorised personnel with original spare parts and according to the state of the art. The applicable provisions must be observed in this respect. 1.5.4 Commissioning It must be checked that all components and documents are available before commissioning. 1.6 Protection type, test certificate and standards Labels on explosion protection and the test certificate are attached to the device. See Chapter 3 “Technical data” with respect to labelling. The guidelines and standards applicable to the Mobile Computer for devices and protected systems for intended use in potentially explosive atmospheres are provided in Chapter 3 “Technical data”. 1.7 Warranty WARNING No changes or retrofits may be made without the written consent of the manufacturer. If non-specified components are used, the explosion protection will no longer be guaranteed. In the case of externally procured parts, it is not guaranteed that these have been designed and manufactured in accordance with their load and requisite safety.  Contact the manufacturer before any changes or retrofits to receive a release. Only use original spare and wearing parts. The manufacturer shall exclusively assume the complete warranty only for spare parts ordered from him. Our “General Terms and Conditions of Sale and Delivery” shall apply in principle. These shall be made available to the operator on signing of contract at the latest. Warranty and liability claims in the case of injury and damage to property shall be excluded if they are attributable to one or several of the following causes:
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Product description Subject to technical changes. 04/2013 Unintended use of the Mobile Computers.  Incorrect assembly, commissioning, operation and servicing.  Failure to observe the information in the User Manual with respect to transport, storage, assembly, installation, commissioning, operation and service.  Independent structural changes.  Faulty monitoring of parts subject to wear and tear.  Incorrectly performed repairs.  Cases of disaster through the impact of foreign bodies and force majeure. We grant a warranty period of one year starting from the date of delivery from the Bad Mergentheim factory on the Mobile Computers and their accessories (exception: battery 6 months). This warranty covers all parts of the delivery and shall be restricted to the free replacement or repair of the defective parts in our Bad Mergentheim factory. For this purpose, any packaging supplied must be kept where possible. In the case of warranty, the goods must be returned to us after written agreement. There shall be no claim to repair at the sight of erection. The versions, components, monitors and windows shown in this User Manual are merely examples and may deviate from the actual display. The information contained herein refers to the explosion-protected version of series MC92N0ex. This User Manual contains all important information on the subject of explosion protection. The original user manuals and product information of MOTOROLA with information on handling and commissioning are also available. In the case of overlaps, the information in this User Manual shall take priority and shall supersede the information from MOTOROLA.
Product description Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 1.8 Co-applicable documents – Set of documents BARTEC  User Manual to the Mobile Computer series MC92N0ex – The use of the explosion-protected version of the Mobile Computer series MC92N0ex is described in this User Manual.  Technical datasheet for the explosion-protected version of the Mobile Computer series MC92N0ex – This technical datasheet contains the most important explosion-relevant technical data as well as general technical data. MOTOROLA The set of documentation of the MC9200 contains information on the respective user requirements and covers the following:  Quick Start Guide for the MC9200 – The commissioning of the Mobile Computer MC9200 is described in this User Manual.  User Manual for the MC92N0 – The use of the Mobile Computer MC MC9200 is described in this User Manual.  Integration Manual for the MC9200 – The setting up of the Mobile Computer MC9200 including accessories is described in this User Manual.
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Product description Subject to technical changes. 04/2013 1.9 Configuration This Manual refers to the following configurations: Configuration Ausführung Wireless WLAN: 802.11 a/b/g/n WPAN: Bluetooth 2.1 EDR Optional RFID options LF 125 KHz / 134 KHz HF 13,56 MHz UHF (EU) 865,6 bis 867,5 MHZ UHF (US) 902 bis 928 MHz Display 3,7’’ VGA Color Display Memory 1 GB RAM / 2 GB Flash Memory Scanner options 1D- Laser Scanner Normal Range 1D- Laser Scanner Long Range 1D- / 2D- Imager 1D- / 2D-Long Range Imager 1D- / 2D- Imager DPM (Direct Part Marking) Operating system options Windows WEH 6.5.3 Windows CE 7.0 Keypad options 28 Keypad (Numeric keys can be used direct, Alpha keys and other key functions can be used via function keys) 43 Keypad (Numeric- and Function keys can be used direct, Alpha keys and other key functions can be used via function keys) 53 Keypad (Numeric- and Alpha keys cen be used direct, other key functions can be used via function keys) 53 Keypad with layout for VT Emulation 53 Keypad with layout for 3270 Emulation 53 Keypad with layout for 5250 Emulation The Emulation software is not part of the device. Other specific information on the keypad is provided under Technical Data or in the MOTOROLA documentation.
Product description Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 2. Product description 2.1 Definition MC92N0ex-IS Version The MC92N0ex-IS Mobile Computer is a robust mobile computer designed for industrial use and has been specially modified by BARTEC for use in hazardous (potentially explosive) areas in  ATEX und IECEx Zone 1  UL Class I, II Division 1  UL Class III This means that the extensive communication and data acquisition options which are already standard in other areas are available to the user in hazardous areas also. Its ergonomic design and easy operation make it an ideal support in the attainment of fast data availability in enterprise processes. Various versions of keypad are available for manual data capture. Other data capture options are provided by the integrated 1D or 1D/2D scan engine for capturing barcodes and various optional RFID readers. The ergonomically mounted scan triggers on the MC92N0ex-IS allow data to be captured easily in one-hand operation. Several technologies are available for data communication with other systems and company divisions.  Wireless LAN (WLAN),  Wireless PAN (WPAN) (Bluetooth)  Ethernet or USB connection through docking station These modules, which are integrated in the device, allow a seamless transmission of voice and data into the company’s network. Other advantages in use are its sturdy construction, easy-to-read 3.7'' VGA colour display with touch technology and highly efficient lithium-ion battery. A 1 GHz dual-core processor in the MC92N0ex-IS ensures fast process execution. Easy application development is facilitated by the two operating systems, Microsoft Windows WEH 6.5.3 or CE 7.0, in conjunction with the Enterprise Mobility Developer Kits (EMDK) or RohMobile Suite from Motorola. 1 GB RAM and 2 GB flash memory are integrated in the device for storing user-defined applications and data. For larger applications and volumes of data, BARTEC offers SD memory cards.
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Product description Subject to technical changes. 04/2013 2.2 Definition MC92N0ex-NI Version The MC92N0ex-NI Mobile Computer is a robust mobile computer designed for industrial use and has been specially modified by BARTEC for use in hazardous (potentially explosive) areas in  ATEX Zone 2 / 22  UL Class I, II Division 2  UL Class III This means that the extensive communication and data acquisition options which are already standard in other areas are available to the user in hazardous areas also. Its ergonomic design and easy operation make it an ideal support in the attainment of fast data availability in enterprise processes. Various versions of keypad are available for manual data capture. Other data capture options are provided by the integrated 1D or 1D/2D scan engine for capturing barcodes and various optional RFID readers. The ergonomically mounted scan triggers on the MC92N0ex-NI allow data to be captured easily in one-hand operation. Several technologies are available for data communication with other systems and company divisions.  Wireless LAN (WLAN),  Wireless PAN (WPAN) (Bluetooth)  Ethernet or USB connection through docking station These modules, which are integrated in the device, allow a seamless transmission of voice and data into the company’s network. Other advantages in use are its sturdy construction, easy-to-read 3.7'' VGA colour display with touch technology and highly efficient lithium-ion battery. A 1 GHz dual-core processor in the MC92N0ex-NI ensures fast process execution. Easy application development is facilitated by the two operating systems, Microsoft Windows WEH 6.5.3 or CE 7.0, in conjunction with the Enterprise Mobility Developer Kits (EMDK) or RohMobile Suite from Motorola. 1 GB RAM and 2 GB flash memory are integrated in the device for storing user-defined applications and data. For larger applications and volumes of data, BARTEC offers SD memory cards.
Product description Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 2.3 Operation The Mobile Computer MC92N0ex is a handheld electrical device. It serves the purposes of the mobile entry, processing and radio transmission of data within potentially explosive atmospheres. It is used exclusively in combination with devices which comply with the requirements placed on the overvoltage category I. The Mobile Computer MC92N0ex–IS, Type 17-A1A.-…./…….. have been modified for use in the following potentially explosive atmospheres  ATEX/IECEx Zone 1  UL Class I Division 1 Groups C and D  UL Class II Division 1 Groups F and G  UL Class III  ATEX/IECEx Zone 2  UL Class I Division 2 Groups A, B, C and D  UL Class II Division 2 Groups F and G The Mobile Computer MC92N0ex–IS, Type 17-A1A.-…./…….. may not be used in the following zones:  ATEX/IECEx Zone 0  ATEX/IECEx Zone 21 / 22  UL Class I Division 1 Groups A and B  UL Class II Division 1 Groups E  UL Class II Division 2 Groups E The Mobile Computer MC92N0ex–NI, Type B7-A2A.-…./…….. have been modified for use in the following potentially explosive atmospheres  ATEX Zone 2  ATEX Zone 22  UL Class I Division 2 Groups A, B, C and D  UL Class II Division 2 Groups F and G  UL Class III The Mobile Computer MC92N0ex–NI, Type B7-A2A.-…./…….. may not be used in the following zones:  ATEX/IECEx Zone 0 and 1  ATEX/IECEx Zone 21  UL Class I Division 1 Groups A, B, C and D  UL Class II Division 1 Groups E, F and G  UL Class II Division 2 Groups E
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Technical data Subject to technical changes. 04/2013 3. Technical data 3.1 Explosion protection IS ATEX Zone 1 Typ 17-A1A3-0…/S…… 17-A1A3-R…/S……. MC92N0ex-IS MC92N0ex-IS RFID Ex protection II 2G Ex q [ib] IIC T4 Gb Type 17-A1A3-R..7/S……. 17-A1A3-R..8/S……. MC92N0ex-IS RFID Ex protection II 2G Ex q [ib] IIB T4 Gb Certificate PTB 13 ATEX 2019 X Standards EN 60079-0:2012 EN 60079-5:2007 EN 60079-11:2012 IECEx Zone 1 Type 17-A1A3-0…/S……. 17-A1A3-R…/S……. MC92N0ex-IS MC92N0ex-IS RFID Ex protection Ex q [ib] IIC T4 Gb Type 17-A1A3-R..7/S……. 17-A1A3-R..8/S……. MC92N0ex-IS RFID Ex protection Ex q [ib] IIB T4 Gb Certificate IECEx PTB 13.0043X Standards IEC 60079-0:2011 Edition 6 IEC 60079-5:2007 Edition 3 IEC 60079-11:2011 Edition 6 ATEX and IECEx Directives ATEX 94/9/EC EMV 2004/108/EC R&TTE 1999/5/EC Product labelling 0044 UL Class I Division 1 and UL Class I, II, III Division 1 Type 17-A1A1-0…/S……. 17-A1A1-R…/S……. MC92N0ex-IS MC92N0ex-IS RFID Ex protection Class I Division 1 Groups C and D Type 17-A1A2-0…/S…… 17-A1A2-R…/S……. MC92N0ex-IS .MC92N0ex-IS RFID Ex protection Class I Division 1 Groups C and D Class II Division 1 Groups F and G Class III Certificate USA and Canada E226123 Standards USA Standard UL 913, 5 Edition. Canada National Standard C22.2 Nr. 157-92
Technical data Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 3.2 Explosion protection NI ATEX Zone 2/22 Type B7-A2A3-0…/S……. B7-A2A4-0…/S……. B7-A2A3-R…/S……. B7-A2A4-R…/S……. MC92N0ex-NI MC92N0ex-NI RFID Ex protection II 3G Ex nA IIC T6 Gc II 3D Ex tc IIIC T80 °C Dc -20 °C ≤ Ta ≤ +50 °C Certificate B1-A2A3-7C0001 Type B7-A2A3-R..7/S……. B7-A2A4-R..7/S……. B7-A2A3-R..8/S……. B7-A2A4-R..8/S……. MC92N0ex-NI RFID Ex protection II 3G Ex nA IIB T6 Gc II 3D Ex tc IIIB T80 °C Dc -20 °C ≤ Ta ≤ +50 °C Certificate B1-A2A3-7C0002 Standards EN 60079-0:2009 EN 60079-15:2010 EN 60079-31:2009 UL Class I Division 2 and UL Class I, II, III Division 2 Type B7-A2A1-0…/S……. B7-A2A1-R…/S……. MC92N0ex-NI MC92N0ex-NI RFID Ex protection Class I Division 2 Groups A, B, C and D Type B7-A2A2-0…/S……. B7-A2A4-0…/S……. B7-A2A2-R…/S……. B7-A2A4-R…/S……. MC92N0ex-NI MC92N0ex-NI RFID Ex protection Class I Division 2 Groups A, B, C and D Class II Division 2 Groups F and G Class III Certificate USA and Canada E321557 Standards ANSI/ISA 12.12.01, UL 60950, Canada National Standard C22.2 No. 60950-1-07 2nd edition
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Technical data Subject to technical changes. 04/2013 3.3 Other applicable standards Electrical safety EN 60950-1 / IEC 60950-1 Setting up of IT safety - Part 1. General requirements UL 60950-1 CSA C22.2 No. 60950-1 WLAN / Bluetooth EN 300 328 Wideband 2.4 GHz Systems EN 301 893 Broadband Radio Access (5GHz) FCC Part 15.247 FCC Part 15.407 Canada: RSS-210 RF Exposure (SAR) EN 62311 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) EN 50371 Generic standard to demonstrate the compliance of low-power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) FCC Part 2 FCC OET Bulletin 65 Supplement C Canada: RSS-102 EMI/RFI EN 301 489-1 EMC Tests on Radio and Telecommunications Terminal Equipment Part 1: Common EMC Requirements EN 301 489-17 EMC Tests on Radio Equipment and Telecommunications Terminal Equipment Part 17: Bluetooth® , WLAN EN 55022 Class B Information Technology Equipment – Radio Disturbance Characteristics - Limits and Methods of Measurement EN 55024 Information Technology Equipment – Immunity Characteristics - Limits and Methods of Measurement FCC Part 15 Canada: RSS-210 Canada: ICES 003 Class B Laser Safety IEC Class2 / FDA Class II in Übereinstimmung mit IEC 60825-1 / EN 60825-1 Laser Safety
Technical data Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 LED Safety IEC / EN 60825-1 Safety of Laser Products - Part 1: Equipment Classification and Requirements IEC / EN 62471 Photobiological Safety of Lamps and Lamp Systems 3.4 Features 3.4.1 Performance features CPU Dual-Core 1 GHz OMAP 4430-Prozessor Operating system Windows Embedded Handheld WEH 6.5.3 or Windows CE 7.0 Memory 1 GB RAM; 2 GB Flash Extension slot SD card slot with SDHC support (up to 32 GB) Optionally extendable with SD card: 1 GB Order number 17-28BE-F006/0002 2 GB Order number 17-28BE-F006/0003 4 GB Order number 17-28BE-F006/0004 8 GB Order number 17-28BE-F006/0005 16 GB Order number 17-28BE-F006/0006 32 GB Order number 17-28BE-F006/0007 Interfaces RS232 USB 3.4.2 Physical features Dimensions in mm/inch Gun: Gun RFID: Height x width x depth 231 x 91 x 193 mm 9.1 x 3.6 x 7.6 inch 231 x 115 x 193 mm 9.1 x 4.5 x 7.6 inch Dimensions in mm/inch Brick: Brick RFID: Height x width x depth 231 x 91 x 59 mm 9.1 x 3.6 x 2.3 inch 231 x 115 x 105 mm 9.1 x 4.5 x 4.1 inch Weight ATEX/IECEx (including battery) Gun : Brick: Gun RFID: Brick RFID: Depends on version and configuration approx. 1060 g approx. 37 oz approx. 980 g approx. 34 oz approx. 1400 g approx. 49 oz approx. 1320 g approx. 46 oz Weight UL Division 1 (including battery) Gun : Brick: Gun RFID: Brick RFID: Depends on version and configuration approx. 830 g approx. 29 oz approx. 700 g approx. 24 oz approx. 1170 g approx. 41 oz approx. 1040 g approx. 40 oz Weight UL Division 2 and ATEX Zone 2/22 (including battery) Gun : Brick: Gun RFID: Depends on version and configuration approx. 810 g approx. 26 oz approx. 680 g approx. 22 oz approx. 850 g approx. 30 oz
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Technical data Subject to technical changes. 04/2013 Brick RFID: approx. 720 g approx. 26 oz Display 3,7"-VGA- colour display VGA mode: 480 (width) x 640 pixel (height) QVGA mode: 240 (width) x 320 pixel (height) (Windows CE only) Touchscreen Analogue-resistive glass touchscreen Backgroand lighting LED technology Network connections Ethernet (via charge station); Full-Speed USB, Host or Client Interactive sensor technology Three-axes accelerometer for motion sensor application for dynamic screen orientation, power monitoring and recognition of free fall Keypad versions 28 Keypad (Numeric keys can be used direct, Alpha keys and other key functions can be used via function keys) 43 Keypad (Numeric- and Function keys can be used direct, Alpha keys and other key functions can be used via function keys) 53 Keypad (Numeric- and Alpha keys cen be used direct, other key functions can be used via function keys) 53 Keypad with layout for VT Emulation 53 Keypad with layout for 3270 Emulation 53 Keypad with layout for 5250 Emulation 28 Tasten only IS version 43 Tasten only IS version 53 Tasten only IS version No emulation software is installed on the Mobile Computers with the emulation key version. The customer must order the emulation software separately from Motorola Solutions and its distributors and install it himself. The devices are modified to suit the selected keypad version. The end user can replace the keypad later himself. When replacing the keyboard, follow the instructions in this manual.
Technical data Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 3.4.3 User environment Operating temperature Only IS Version type 17-A1A.-… -20 °C to +40 °C -4 °F to +104 °F Operating temperature Only NI Version type B7-A2A.-… -20 °C to +50 °C -4 °F to +122 °F Operating temperature during charging 0 °C to +40 °C +32 °F to +104 °F Storage temperature (without battery) -40 °C to +70 °C -40 °F to +158 °F Air humidity 5 % to 95 % (non-condensing) Class of protection (EN 60529) Only IS Version type 17-A1A3-… (ATEX/IECEx Zone 1) IP 54 Class of protection (EN 60529) Only IS Version type 17-A1A2-… (UL Division 1) Only NI Version type B7-A2A.-… (UL Division 2) IP 64 3.4.4 Application development PSDK (Platform Software Development Kit) and EMDK (Enterprise Mobility Developer Kit) is available via the MOTOROLA Solutions Website. Available for  C  Java  .Net Browser support: Pocket Browser or “RhoMobile Suite” from MOTOROLA Solutions for application development. RhoMobile Suite Toolkit consists of: Technology-independent applications are prepared using this toolkit. Device type, operating system and screen size no longer play a role. RhoMobile applications run simply on all popular mobile devices used in your company.
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Technical data Subject to technical changes. 04/2013  RhoStudio  Rhodes.  RhoElements  RhoConnect  RhoHub  RhoGallery One tool simplicity for application development, debugging and testing. Open source cross-platform development framework for consumer applications Cross-platform development framework for enterprise applications. A mobile application and integration server for easy backend system integration and synchronization. Hosted services that simplify mobile application development and deployment. An enterprise app store to deploy, manage and secure mobile apps. Further applications are available from MOTOROLA Solutions, e.g. Rem Capture  for the processing of registration files. Application Launcher  for the classification of applications in categories and access regulation for individual applications or operating system. Data Wedge  Barcodes in applications can be read such as Excel or Word using. AppCenter  to define access regulations for the applications. RFID SDK is available for C# Includes all neccessary drivers and DLL files for implementation. A RFID demo available in open source to show how to implement the RFID reader in an application. 3.4.5 Voice and data transmission Wireless LAN WLAN radio module Radio standard Tri Mode IEEE 802.11a/b/g/n Data rate IEEE802.11a: up to 54 Mbit/sec. IEEE802.11b: up to 11 Mbit/sec. IEEE802.11g: up to 54 Mbit/sec. IEEE802.11n: up to 65 Mbit/sec. Frequency range (country-dependent) IEEE802.11a: 5 GHz IEEE802.11b: 2.4 GHz IEEE802.11g: 2.4 GHz IEEE802.11n: 2.4 GHz and 5 GHz Operating channels IEEE802.11a IEEE802.11b/g Channel 8 - 165 5040 MHz - 5825 MHz Channel 1 - 13 2412 MHz - 2472 MHz Channel 14 2484 MHz Japan only The actual operating channels and frequencies are subject to the applicable rules and the certification authorities Safety WPA2 Enterprise, 802.1x; EAP-TLS; TTLS (CHAP, MS-CHAP, MS-CHAPv2, PAP oder MD5); PEAP
Technical data Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 (TLS, MSCHAPv2, EAP-GTC); LEAP, EAP-FAST (TLS, MS-CHAPv2, EAP-GTC), WPA2/AES, CCX v4, FIPS 140-2 konform and IPv6 Spread procedure DSSS (Direct Sequence Spread Spectrum) and Orthogonal Frequency Division Multiplexing Language support Voice over IP Antenna internal 3.4.6 Voice and data transmission Wireless PAN Bluetooth Class II, Version 2.1 with EDR Maximum Output Power 2.5 mW Maximum data rate Up to 2.1 Mbit/s Maximum range 10 m 32.8 feet Antenna Internal chip aerial 3.4.7 Headset Headset Connector Ex protection Ex ib IIC U0 8,6V I0 354mA P0 479mW C0 930nF L0 460µH 3.4.8 Data Captur Options Four available configuration possibilities 1D- Standard-Range Laser Scanner (SE965) 1D- Long-Range Laser Scanner (Lorax SE1524) 1D- / 2D- Imager (Blockbuster SE4500-SR) 1D- / 2D- Imager DPM (Direct Part Marking) (Blockbuster SE4500-HD) 1D- / 2D- Long Range Imager (SE4600-LR) The various scan engines’ maximum ranges depend on the bar code symbology/type and the module width (in mils) used. 3.4.8.1 1D- Standard-Range Laser Scanner (SE965) SE965 1D scan engine decodes/reads 1D symbols. Further detailed information on the SE965 can be found in the “User Manual“ or “Integrator Guide” from Motorola Solutions. Available for the MC92N0ex Brick versions. Laser class CDRH Class II / IEC Class 2 Decode range with Code 39, 55 mils bis zu 2,5 m bis zu ca. 100 Inch The decode range depends on the quality and size of the bar code and on the scan engine’s software setting. Optical resolution 0.005 inch - minimum element width
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Technical data Subject to technical changes. 04/2013 Skew ± 40° from the vertical Pitch ± 65° from the starting position Roll ± 50° from the vertical Ambient light immunity 86,111 lux Scan rate 104 (± 12) scans/sec. (bi-directional) Scan angle 47° ± 3° far range 35° ± 3° medium distance 10° ± 3° near range Laser energy at 650 nm 1.7 mW peak 3.4.8.2 1D- Long-Range Laser Scanner (Lorax SE1524) Lorax SE1524 1D scan engine decodes/reads 1D symbols Other detailed information on the Lorax SE1524 can be found in the Motorola Solutions “User Manual“ or “Integrator Guide”. Available for the MC92N0ex Gun version. Laser class CDRH Class II / IEC Class 2 Decode range Up to 13.7 m up to 45 ft. The decode range depends on the quality and size of the bar code and on the scan engine’s software setting. Ambient light immunity 86,111 lux Scan rate 35 (± 5) scans/sec. (bi-directional) Scan angle 13.5° ± 0.7° Laser energy at 650 nm 1.0 mW nominal value 3.4.8.3 1D-/2D- Imager (Blockbuster SE4500-SR) SE4500-SR 1D/2D Imager Engine (omni-directional) decodes/reads 1D and 2D symbols Further detailed information on the SE 4500-SR Blockbuster can be found in the “User Manual“ or “Integrator Guide” from Motorola Solutions. Available for the MC92N0ex Gun and Brick versions. Laser class CDRH Class II / IEC Class 2 Decode range, near with code 39, 5 mils up to approx. 5.3 cm up to approx. 2.1 inches Decode range, far with code 39, 5 mils up to approx. 19.1 cm up to approx. 7.5 inches The decode range depends on the quality and size of the bar code and on the software setting in the scan engine. Focus distance From the centre of the scanner window SR --- 19 cm Resolution 752 x 480 pixels HxV (grey phase) Rotational tolerance 360° Angle of inclination ± 60° from the starting position Skew tolerance ± 60° from the starting position Ambient light immunity 96,900 lux
Technical data Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 Aiming LED (VLD) 655 Nm ± 10 nm Exposure element (LED) 625 Nm ± 5 nm LEDs (2x) Field of view Horizontal 40 ° Vertical 25 ° 3.4.8.4 1D-/2D- Imager DPM (Blockbuster SE4500-HD) SE4500-HD 1D/2D Imager Engine with DPM decodes/reads a wide range of DPM markings on metal, plastic and glass surfaces, including dot peening, laser etching, casting, stamping or moulding. Further detailed information on the Blockbuster SE 4500-HD can be found in the “User Manual“ or “Integrator Guide” from Motorola Solutions. Available for the MC92N0ex Gun and Brick versions. Laser class CDRH Class II / IEC Class 2 Decode range, near with code 39, 3 mil up to approx. 4.1 cm up to approx. 1.6 inches Decode range, far with code 39, 3 mil up to approx. 9.7 cm up to approx. 3.8 inches The decode range depends on the quality and size of the bar code and on the scan engine’s software setting. Focus distance From the centre of the scanner window SR --- 19 cm Resolution 752 x 480 pixels HxV (grey phase) Roll tolerance 360° Pitch angle ± 60° from the starting position Skew tolerance ± 60° from the starting position Ambient light immunity 96,900 lux Aiming LED (VLD) 655 Nm ± 10 nm Exposure element (LED) 625 Nm ± 5 nm LEDs (2x) Field of view Horizontal 40 ° Vertical 25 °
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Technical data Subject to technical changes. 04/2013 3.4.8.5 1D-/2D- Long Range Imager (SE4600-LR) SE4600-LR 1D/2D Imager Engine (omni-directional) decodes/reads 1D and 2D symbols Further detailed information on the SE 4600-LR can be found in the “User Manual“ or “Integrator Guide” from Motorola Solutions. Available for the MC92N0ex–NI Gun and Brick versions. Only available for NI version type B7-A2A4-... Laser class CDRH Class II / IEC Class 2 Decode range, near with code 39, 5 mils up to approx. 20,32 cm up to approx. 8 inches Decode range, far with code 39, 5 mils up to approx. 9,14 cm up to approx. 30 feet The decode range depends on the quality and size of the bar code and on the software setting in the scan engine. 3.4.9 Decodable barcode types All supported 1D-Barcodes All supported 2D-Barcodes (only supported with Imager versions) 1D-Symbol/Codes 2D-Symbol/Codes Code 11 Code 39 Aztec Micro PDF-417 Code 93 Code 128 Australian 4-state Maxi Code Codabar Coupon code Canadian 4-state PDF-417 Chinesisch 2 aus 5 Discrete 2 aus 5 Composite AB QR Code Interleaved 2 aus 5 Trioptic 39 Composite C TLC39 EAN-8 EAN-13 Data Matrix UK 4-state UPCA UPCE Dutch Kix US Planet UPC/EAN Zusätze MSI Japanese 4-state US Postnet Webcode RSS-14 PDF-417 Macro USPS 4-state (US4CB) RSS Limited RSS Expanded (Macro) Mikro PDF-417 microQR
Technical data Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 3.4.10 RFID Option Four different RFID options available LF (Low Frequency) HF (High Frequency) UHF (EU) (Ultra High Frequency) UHF (US) (Ultra High Frequency) The maximum read / write ranges of the different RFID readers are dependent on various environmental and ambient conditions and refer in the following to office environment. Tag size Mounting surface (mtall, wood or different) Environment conditions Magnetical influence from outside Temperature Humidity RFID Option with extended reader RFID Option with extended reader + mounted antenna 3.4.10.1 LF Reader (Einternal Module) Available for MC92N0ex Gun and Brick Not available for ATEX/IECEx Zone 1 Combination with Scan Engine is not possible! Nominal writing distance approx. 5 cm approx. 1.9 inches Antenna Integrated as ferrite antenna or air coil antenna Frequency range 125/134 kHz Transmitting power 100 mW ± 2dB Supported standards HITAG S256 HDX - RO EM 4450/4550 HITAG S 2 kbit HDX (Multipage) EM4xxx (UNIQUE) HITAG 1 EM4xxx (UNIQUE) FDX-B HITAG 2 FDX-B BDE Q5 BDE ISO 11784/5 ATA5567 ISO 117845 ISO Animal EM4305 ISO Animal
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Technical data Subject to technical changes. 04/2013 3.4.10.2 LF Reader (Extended Module) Available for MC92N0ex Gun and Brick Nominal writing distance approx. 5 cm approx. 1.9 inches Antenna Integrated in the externded module as ferrite antenna or air coil antenna Frequency range 125/134 kHz Transmitting power 100 mW ± 2dB Supported standards HITAG S256 HDX - RO EM 4450/4550 HITAG S 2 kbit HDX (Multipage) EM4xxx (UNIQUE) HITAG 1 EM4xxx (UNIQUE) FDX-B HITAG 2 FDX-B BDE Q5 BDE ISO 11784/5 ATA5567 ISO 117845 ISO Animal EM4305 ISO Animal 3.4.10.3 HF Reader (Extended Module) Available for MC92N0ex Gun and Brick Supported standards HF ISO 15693 e.g. I-Code SLI, Tag-IT HFI, my-d vicinity, STM LRI512 HF ISO 14443 e.g. mifare, mifare Ultra Light, my-d proximity, I-Code 1 (optional) Nominal reader calibration width HF ISO 15693 HF ISO 14443 approx. 7 to 12 cmapprox. 2.75 to 4.72 inch approx. 1 to 6 cmapprox. 0.4 to 2.36 inch (with tags in cheque card format) Nominal writing distance HF ISO 15693 HF ISO 14443 approx. 7 to 12 cmapprox. 2.75 to 4.72 inch approx. 1 to 6 cmapprox. 0.4 to 2.36 inch (with tags in cheque card format) Antenna integrated Frequency range 13.56 MHz Transmitting power 250 mW ± 2 dB
Technical data Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 3.4.10.4 UHF Reader (Extended Module) Available for MC92N0ex Gun and Brick Supported standards EPC Class 1 Gen 2 tag Nominal reading range approx. 30 to 50 cm approx. 11.8 to 19.6 inch Nominal writing distance approx. 30 to 50 cm approx. 11.8 to 19.6 inch Antenna integrated Frequency range Europe USA 865.6 to 867.5 MHz (EN302 208) 902.0 to 928.0 MHz (FCC CFR 47 part 15.247) Transmitting power 200 mW ± 2dB 3.4.10.5 UHF Reader (Extended Module + Mounted Antenna) Available for MC92N0ex Gun and Brick ATEX/IECEx protection type: II 2G Ex q [ib] IIB T4 Gb Supported standards EPC Class 1 Gen 2 tag Nominal reading range approx. 150 cm approx. 59 inches Nominal writing distance approx. 150 cm approx. 59 inches Antenna external (UPM Raflatac) Frequency range Europe USA 865.5 to 867.5 MHz (EN302 208) 902.0 to 928.0 MHz (FCC CFR 47 part 15.247) Transmitting power 200 mW ± 2dB
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Technical data Subject to technical changes. 04/2013 3.5 Battery Battery Type 17-A1Z0-0001 for Typ 17-A1A3-… Type 17-A1Z0-0002 for Typ 17-A1A2-… Type B7-A2Z0-0006 für Typ B7-A2A4-… (charge only outside hazardous location) Lithium Ions 7.4 V / 2200 mAh Lithium Ions 7.4 V / 2200 mAh Lithium Ions 7.4 V / 2200 mAh Operating temperature  During charging  During discharging 0 °C to +40 °C +32 °F to 104 °F -20 °C to +50 °C -4 °F to 122 °F Storage temperature -20 °C to +50 °C -4 °F to 122 °F Relative air humidity 20 % - 95 % (non-condensing) Backup battery Ni-MH battery 2.4 V/15 mAh (rechargeable) Integrated in the device and only replaceable in the factory. Battery performance 8 hours The battery life depends on various usage factors and on the device settings such as e.g. Use and setting of WLAN / Bluetooth Backlighting Frequency of scanner utilisation Frequency of RFID utilisation etc.
Technical data Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 3.6 External interfaces Restrictions:  The 17-pole data interface should only be used outside the potentially explosive atmosphere and exclusively with the devices stated by the manufacturer!  The headset connection should only be used outside the potentially explosive atmosphere and exclusively with the devices stated by the manufacturer! Pin Outs Interface Connector PIN Signal Name Function PIN Signal Name Function 1 USB_GND USB 10 Cradle_DET Grounded with device inside of cradle 2 USB_D_Plus USB 11 DTR RS232C 3 TxD RS232C 12 Not assigned Not assigned 4 RxD RS232C 13 Power_IN 12 V / 2.5 A max. 5 DCD RS232C 14 CTS RS232C 6 RTS RS232C 15 USB_5V_DET USB 7 DSR RS232C 16 USB_D_Minus USB 8 GND Erde, 2.5 A max. 17 EXT_Power_OUT 3.3 V @ 500 mA 9 RI RS232C
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Technical data Subject to technical changes. 04/2013 3.7 Product labelling (sample of UL Division 1 and ATEX/IECEx Zone 1) MC 92N0ex-IS Warning Laser Device Marking for UL Device Marking for ATEX/IECEx Warning Laser Type Label for UL for ATEX/IECEx
Technical data Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 Battery Type 17-A1Z0-0001 Type Label Battery Type 17-A1Z0-0002 Type Label Battery Type B7-A2Z0-0006 Type Label
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Technical data Subject to technical changes. 04/2013 3.8 Laser labels In compliance with IEC 60825 and EN 60825, Clause 5 the following information is provided: DEUTSCH KLASSE 1 KLASSE 1 LASER PRODUKT KLASSE 2 LASERLICHT NICHT IN DEN LASERSTRAHL SEHEN KLASSE 2 LASER PRODUKT ENGLISH CLASS 1 CLASS 1 LASER PRODUCT CLASS 2 LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT FRENCH / FRANÇAIS CLASSE 1 PRODUIT LASER DE CLASSE 1 CLASSE 2 LUMIERE LASER NE PAS REGARDER LE RAYON FIXEMENT PRODUIT LASER DE CLASSE 2 ITALIAN / ITALIANO CLASSE 1 PRODOTTO AL LASER DI CLASSE 1 CLASSE 2 LUCE LASER NON FISSARE IL RAGGIOPRODOTTO AL LASER DI CLASSE 2 PORTUGUESE / PORTUGUÊS CLASSE 1 PRODUTO LASER DA CLASSE 1 CLASSE 2 LUZ DE LASER NÃO FIXAR O RAIO LUMINOSO PRODUTO LASER DA CLASSE 2 DUTCH / NEDERLANDS KLASSE 1 KLASSE-1 LASERPRODUKT KLASSE 2 LASERLICHT NIET IN STRAAL STAREN KLASSE-2 LASERPRODUKT DANISH / DANSK KLASSE 1 KLASSE 1 LASERPRODUKT KLASSE 2 LASERLYF SE IKKE IND I STRÅLEN KLASSE 2 LASERPRODUKT NORWEGIAN / NORSK KLASSE 1 LASERPRODUKT, KLASSE 1 KLASSE 2 LASERLYS IKKE STIRR INN I LYSSTRÅLEN LASERPRODUKT, KLASSE 2 FINNISH / SUOMI LUOKKA 1 LUOKKA 1 LASERTUOTE LUOKKA 2 LASERVALO ÄLÄ TUIJOTA SÄDETTÄ LUOKKA 2 LASERTUOTE
Transport and storage Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 4. Transport and storage 4.1 Transport Report any transport damage or incomplete deliveries immediately after receipt in writing to the forwarding company and BARTEC GmbH. Any damage caused through incorrect storage shall not be covered by the warranty provisions of BARTEC GmbH. 4.2 Storage ATTENTION Property damage through incorrect storage!  Observe storage temperatures.  Keep humidity away from the Mobile Computers. Additional information on the batteries The batteries of BARTEC (Type 17-A1Z0-0001, 17-A1Z0-0002 and B7-A2Z0-0006) are developed and manufactured in accordance with the highest industrial standards. The operating time or storage period of a battery is restricted, however. The actual life of a battery is influenced by different factors, e.g. hot, cold, rough operating environment and falling from a great height. If a battery is kept longer than six months, the performance may be impaired on a permanent basis. Keep the batteries in a dry, cool place. For longer periods of storage, remove the batteries from the device to prevent self-discharge, rusting of metallic parts and the escape of electrolyte. Batteries kept for the duration of 6 months or longer should be charged and then discharged again at least every 3 months. If electrolyte has escaped, do not touch the areas affected and dispose of the batteries as prescribed. Replace the battery if the operating time has shortened considerably. The standard warranty period for all BARTEC batteries is 6 months, whereby it is irrelevant whether the battery was acquired separately or was contained in the scope of delivery of the MC92N0ex.
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Commissioning Subject to technical changes. 04/2013 5. Commissioning Before you assemble the device, make sure that all components and documents exist. Scope of delivery: 1 x MC92N0ex 1 x Lithium-ion battery 7.4 V / 2200 mAh 1 x Screen protector 1 x Stylus 1 x User Manual Optional: Authorised accessories from BARTEC:  SD card  Replacement stylus  Battery 7.4 V / 2200 mAh  Charging station  Cradle  Screen protector  Leather holster DANGERAvoid electrostatic charging in potentially explosive atmosphere. There is a risk of fatal injury in an explosive atmosphere!  Do not wipe or clean the devices with a dry cloth.  Wear suitable clothing and shoes.  Do not use rubber gloves or similar. DANGERUnintended use endangers explosion protection. There is a risk of fatal injury in an explosive atmosphere!  Do not make any changes to the Mobile Computer.  In the case of functional disturbances or damage to the enclosure, the device should be removed immediately from the potentially explosive atmosphere to a safe place. Remove battery to decommission the device!  Do not use any battery replicas or batteries from other manufacturers.
Commissioning Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 5.1 Requirements in potentially explosive atmosphere Mobile Computer 1. The Mobile Computer may not be opened. 2. Do not use, swap or replace any non-specified components. 3. Do not retrofit any components to the internal plugs or slots. 4. Protect the Mobile Computer from impact! 5. Do not expose the Mobile Computer to caustic/aggressive liquids, vapours, mists! 6. Avoid the impact of moisture outside the specifications. 7. Avoid thermal impact outside the specified temperature range. 8. Use the 17-pole data interface only outside the potentially explosive atmosphere and exclusively with the devices specified by the manufacturer! 9. Use the headset connection only outside the potentially explosive atmosphere and exclusively with the devices specified by the manufacturer! Battery 1. The battery may not be opened. 2. Only charge the battery outside the potentially explosive atmosphere. Only use the battery for the purpose listed in this User Manual. Is only suitable for the Mobile Computer MC92N0ex–IS. Battery type 17-A1Z0-0001 is only suitable for MC92N0ex–IS (type 17-A1A3-…./……..) Battery type 17-A1Z0-0002 is only suitable for MC92N0ex–IS (type 17-A1A2-…./……..) Battery type B7-A2Z0-0006 is only suitable for MC92N0ex–NI (type B7-A2A1-…./…….. and B7-A2A2-…./…….. and B7-A2A4-…./…….) 3. There is a danger of burning if used incorrectly. Do not expose the battery to temperatures of more than +50 °C (122 °F). 4. Battery acid may escape from the cells and cause burning in the case of damage. 5. Defective batteries must be disposed of immediately, whereby the provisions on battery disposal applicable in the respective region must be observed. 6. The battery may explode if it catches fire! 7. Do not short circuit the battery! Accessories 1. Only install or replace accessories outside the potentially explosive atmosphere. 2. Use accessories exclusively which have been tested or certified by BARTEC for this purpose. 3. The end user can replace the SD card, screen protector, keypad and leather holster himself.
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Commissioning Subject to technical changes. 04/2013 5.2 First steps  Unpack the Mobile Computer.  Insert the battery into the Mobile Computer.  Charge the battery on the cradle.  Switch on the Mobile Computer. Optional:  Charge the battery in a charger.  Insert a SD card.  Remove/replace screen protector. The individual steps are explained on the following pages. 5.3 Structure
Commissioning Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 5.4 Handling accessories DANGERNon-certified accessories endanger explosion protection. There is a risk of fatal injury in an explosive atmosphere!  Only use original accessories from BARTEC /MOTOROLA. Only permitted outside the potentially explosive atmosphere:  Charge battery.  Insert/replace SD card.  Remove/replace screen protector. Further information is also provided by the MOTOROLA documentation.
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Commissioning Subject to technical changes. 04/2013 5.4.1 Insert battery Depending on configuration, the MC92N0ex–IS is supplied with a 7.4 V / 2200 mAh battery. Available types Order number Charge time Battery (EU) for ATEX/IECEx Lithium-ion battery 7.4 V / 2200 mAh 17-A1Z0-0001 Less than 8 hours Battery (US) for UL Division 1 Lithium-ion battery 7.4 V / 2200 mAh 17-A1Z0-0002 Less than 8 hours Battery for UL Division 2, ATEX Zone 2/22 Lithium-ion battery 7.4 V / 2200 mAh B7-A2Z0-0006 Less than 8 hours Work steps: 1. Charge the battery only outside hazardous areas. 2. Use only batteries which have been tested or certified by BARTEC for this purpose. 3. Insert the battery with the battery contacts facing forwards into the battery compartment under the keypad. 4. Make sure that the battery’s charging contacts agree with the charging contacts in the battery compartment. 5. Push the battery into the battery compartment until it locks into place.
Commissioning Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 5.4.2 Change keypad The MC92N0ex has interchangeable modular keypads. Danger Non-certified accessories endanger explosion protection. There is a risk of fatal injury in an explosive atmosphere!  It must be ensured that only original keypads are used in safety-oriented operation.  The use of imitation keypads from other manufacturers will render the type of ignition protection ineffective and there will then be a risk of fire or explosion. Only permitted outside the potentially explosive atmosphere:  The keypad may only be changed outside the hazardous area!  Follow proper ESD precautions to avoid damaging the SD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is property grounded. ATTENTION Incorrect handling may cause damage to property!  Power off the MC92N0ex before start of change parts.  Put the MC92N0ex into suspend mode before you remove the battery. Failure to properly remove the battery may cause the MC92N0ex to cold boot and potential loss of data. If the MC92N0ex is in suspend mode, press the Power button to wake the device. Wait for the MC92N0ex to fully awake from suspend mode. 1. Turn off the MC92N0ex 2. Remove the battery. (see chapter 5.4.1 Insert/Remove battery) 3. Take out the screws at the top edge of the keypad. Figure: Removing the keypad
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Commissioning Subject to technical changes. 04/2013 4. Pull the keypad downwards in the direction of the arrow and then forwards to take it out of the MC92N0ex. 5. Check that the contacts and seals are clean and in good condition. 6. Snap on the keypad in the direction of the arrow (see Figure: Installing the keypad) and push it upwards until the boreholes for the screws are over the threaded sleeves. Figure: Installing the keypad 7. Check that the keypad is mounted correctly. Figure: Keypad mounted correctly Figure: Keypad mounted incorrectly 8. Push the keypad in the direction of the arrow (see Figure: Installing the keypad) until the boreholes on the keypad are positioned over the threaded holes on the enclosure. ATTENTION Incorrect handling may cause damage to property!  Do not apply more than 0.452 NM or 4 in-lbs of torque when tightening the keypad screws. 9. After the exchange of the keyboard a cold boot (see chapter 7.1.4 Cold Boot) must be performed. 10. The current drivers are installed on the unit and initialized automatically by the cold boot.
Commissioning Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 5.4.3 Insert SD card ATTENTION Damage to the SD card through electrostatic discharges!  Use an antistatic base.  Ensure that the operator is correctly earthed. Use only specified SD cards 1 GB Order number 17-28BE-F006/0002 2 GB Order number 17-28BE-F006/0003 4 GB Order number 17-28BE-F006/0004 8 GB Order number 17-28BE-F006/0005 16 GB Order number 17-28BE-F006/0006 32 GB Order number 17-28BE-F006/0007 Work steps To install the SD card: 1. Only install or replace the SD card outside the potentially explosive atmosphere. 2. Only use SD cards which have been tested and certified by BARTEC for this purpose. 3. If the MC92N0ex is in standby mode, press the red Power button to activate the device. 4. Press the red Power button to suspend the MC92N0ex. 5. Remove the battery 6. Remove the two keypad screws and slide the keypad down and lift off (see chapter 5.4.2 Change keypad). 7. Lift the SD card retaining door. 8. Position the SD card, with the contacts down, into the SD card holder (shown in Figure: Inserting the SD card below). The SD card corner notch fits into the holder only one way. 9. Snap the retaining door closed. Figure: Inserting the SD card 10. Replace the keypad and re-attach using the two screws (see chapter 5.4.2 Change keypad) 11. Perform a warm boot that the Keypad is recognized by the system.
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Commissioning Subject to technical changes. 04/2013 ATTENTION Incorrect handling may cause damage to property!  Do not apply more than 0.452 NM or 4 in-lbs of torque when tightening the keypad screws. 5.4.4 Remove/replace screen protector The screen protector protects the touchscreen and improves the user friendliness of the device. With its relatively hard surface, the screen protector offers a mechanical protection against scratches for example and reduces disturbing light reflections. Danger Use of a screen protector changes the Ex protection type of the MC92N0ex to IIB. There is a risk of explosion when you use the MC92N0ex in combination with screen protector in hazardous area with gas group IIC.  Use of screen protector change the Ex protection type of the MC92N0 from IIC to IIB. ATTENTION Incorrect handling may cause damage to property!  Use a screen protector so as not to impair the device warranty.  Only use screen protector (Type 17-A1Z0-0003) from BARTEC.  Observe the installation instructions for the screen protector.  Do not use any sharp objects to remove the screen protector! Display protection foil Ex protection Ex IIB Work steps 1. Only remove or replace the screen protector outside the potentially explosive atmosphere. 2. Clean the display carefully from any dust or dirt. 3. Lift a corner of the screen protector and remove it from the display. 4. Remove half of the thin cover film of the display protector and position the display protector and position the display protector on your display. Be aware that the display protector should be placed in the middle of your display. 5. Squeeze down the display protector lightly with a credit card from one side to the other on your display. At the same time remove the rest of the thin cover film. Smooth out existing bubbles with your credit card.
Commissioning Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 6. Attach the screen protector in accordance with the “Screen protector installation instructions”. You can order screen protector from your customer consultant or from BARTEC. Installation instructions for the screen protector are part of the delivery scope. Part number: 17-A1Z0-0003 screen protector, pack of 5. Sample picture 5.4.5 Holster and cases BARTEC offers holsters to protect the MC92N0ex series. The holsters are available in different versions that all variants can be protected. Danger Non-certified accessories endanger explosion protection. There is a risk of fatal injury in an explosive atmosphere!  It must be ensured that only original holsters and cases are used in safety-oriented operation.  The use of holster or cases made of other materials as leather will render the type of ignition protection ineffective and there will then be a risk of fire or explosion. ATTENTION Incorrect handling may cause damage to property!  Use only holster or cases what are made of leather.
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Commissioning Subject to technical changes. 04/2013 Leather holster with ining for MC 92N0ex-K RFID 03-9809-0023 for MC 92N0ex-G RFID 03-9809-0024 for MC 92N0ex-G and MC 92N0ex-K with belt clip and turned part 03-9809-0026 Turned part for holster 03-9809-0027 Leather holster with ining and keypad protection foil for MC 92N0ex-K RFID 03-9809-0019 for MC 92N0ex-G RFID 03-9809-0020 for MC 92N0ex-G and MC 92N0ex-K with belt clip and turned part 03-9809-0022 Turned part for holster 03-9809-0027 5.4.6 Headset Danger Headset what are not compliant to the saftey data of the headset connector endanger a risk of explosion. There is a risk of fatal injury in an explosive atmosphere!  It must be ensured that only headset s in use what are compliant to the technical data of the headset connector. The safety orientaded data can be found in the EC-type-Examination Certificate or in the chapter for the technical data in this manual. Saftey orianttaded Headset Connector data: Ex protection Ex ib IIC U0 8,6V I0 354mA P0 479mW C0 930nF L0 460µH
Operation Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 6. Operation The operator using an electric system in an potentially explosive environment must keep the accompanying operation equipment in a good condition, operate and monitor it correctly and conduct the requisite services and repairs. Before commissioning the devices, it must be checked that all components and documents are available. 6.1 Final inspection The following aspects must be checked before putting the device into operation:  Is there any damage to the display, scanner window or enclosure?  Is the battery used certified?  Is the battery compartment cover closed?  Does the screen protector (if used) have the requisite certification?  Is the SD card specified for the MC92N0ex–IS? 6.2 Handling Optimum standby position Right: The Mobile Computer is protected from damage. Wrong: The Mobile Computer can be damaged by objects on the surface or may fall down.
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Operation Subject to technical changes. 04/2013 6.3 Operation recommendations and requirements 6.3.1 Basic safety and health protection requirements Consult your local health and safety officer to ensure that you are acquainted with the safety regulations in your company which serve to protect employees at the work place. 6.3.1.1 Ergonomic recommendation The following recommendations should be considered for everyday work at the workplace:  Avoid one-sided, constantly repetitive movements.  Body posture should be as neutral as possible.  Avoid exercising great force.  Keep objects which are used frequently within a functional distance.  Adjust the working height to the body height and type of work.  Erect objects without vibration.  Avoid the exercise of direct pressure.  Ensure that tables and chairs are adjustable.  There must be sufficient room for body movements.  Ensure that the working environment is suitable.  Optimise workflows.  Alternate between the left and right hand as frequently as possible when conducting repetitive tasks. 6.3.1.2 Vehicle installation RF signals may impair incorrectly installed or inadequately shielded electronic systems in vehicles (including safety systems). If you have any questions on your vehicle, get in touch with the manufacturer or a sales person. You can also learn from the manufacturer whether additional equipment has been fitted to the vehicle. An airbag has a strong impact. Do NOT place objects, such as installed or portable radio equipment, in the area above the airbag or in the area of deployment of the airbag. If the radio equipment was not correctly installed in the vehicle, severe injuries may result if the airbag is triggered. Position the device within good range. Ensure that you have access to the device without having to take your eye off the road. It is not permitted to connect a warning device which leads to horn sounds or light signals when receiving a call in road traffic.
Operation Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 Road traffic safety Do not take any notes and do not use the device when driving. Making a list of to-do’s or browsing through the address book when driving has a negative influence on safe driving. When driving on the roads, you must primarily think of your safety and that of the other road users. You should therefore concentrate completely on the road. Check the legal provisions on the use of wireless devices in road traffic of the respective region. Always observe these. If you use a wireless device during driving, rely on your good judgment and remember the following: 1. Become acquainted with the wireless device and its functions such as the shortcut dialing or dial repetition. These functions may prove to be useful if you would like to make a call without taking your eye off the road. 2. Where possible, use hands-free equipment. 3. Let your dialogue partner know that you are behind the steering wheel. Where necessary, discontinue the call in dense traffic or poor weather conditions. Rain, sleet, snow, ice and even very dense traffic represent dangers. 4. Dial the required numbers carefully and estimate the traffic situation. Make your calls when you have brought your car to a stop or before you leave. Plan your calls such that they can be made when the car is parked. If you really must make a call during the trip, only dial a part of the number, check the road and look in the rear view mirror and then dial the rest of the number. 5. Do not surccumb to stressful and emotional telephone conversations which could take your attention from the road. Let your dialogue partner know that you are in a car and refrain from conversations which could take your attention away from the road. 6. Call for help using your mobile device if necessary. Dial the emergency services (9-1-1 in the USA and 1-1-2 in Europe) or other local emergency service numbers in the event of fire, accidents or medical emergences. Remember that these calls are free of charge on the wireless device! The call can be made independently of security code or networks with or without the SIM card. 7. Help your fellow humans in emergency situations with your mobile device. If you witness a serious accident, crime or other emergency, call the emergency service (9-1-1 in the USA and 1-1-2 in Europe) or another local emergency service number because you could be the one who needs help next time. 8. Call the breakdown service or a special mobile radio number for support if you encounter problems on the road. If you pass a car with a breakdown, which does not represent a serious impediment to traffic, pass traffic lights which do not function, a traffic accident with slight damage and without injured people or a possibly stolen car, please get in touch with the road police or another special mobile radio number for support. 9. “The mobile communication industry requests you to give safety priority when using your device/telephone.”
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Operation Subject to technical changes. 04/2013 6.3.1.3 Information for the use of wireless devices Heed all warnings referring to the use of wireless devices. 6.3.1.4 Safety in aircraft Switch off the wireless device when asked to do so by the ground staff and by employees of the airline. If your device has a flight mode or a similar function, find out about its correct use from the aircraft staff. 6.3.1.5 Safety in hospitals Wireless devices emit radio frequencies and can cause disturbances to medical technical electrical devices. Wireless devices should be switched off on request when you are in hospitals, clinics or health establishments. This is intended to avoid any possible interference with sensitive medical equipment. 6.3.1.6 Heart pacemakers Manufacturers recommend that a minimum distance of 15 cm be observed between a wireless handheld device and a pacemaker to avoid potential interference. This guideline is in line with independent research results and recommendations of Wireless Technology Research.  Wearers of heart pacemakers  Persons with heart pacemakers should ALWAYS keep at least 15 cm away from the activated device.  The device may not be worn by these persons in the breast pocket.  The device should be held to the ear which is furthest away from the heart pacemaker.  If you have reason to assume that interference has arisen, you should SWITCH OFF the device immediately. 6.3.1.7 Hearing aids The wireless device may cause disturbances to hearing devices. Get in contact with the manufacturer of your hearing device in the case of disturbances to ask about possible solutions.  The device may not be worn in the breast pocket of these persons.  The device should be held to the ear which is furthest away from the heart pacemaker.  If you have reason to assume that interference has arisen, you should SWITCH OFF the device immediately. 6.3.1.8 Other medical equipment Ask your doctor or the manufacturer of the medical device to determine whether putting the wireless product into operation impairs the medical device.
Operation Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 6.3.2 Equipment of the laser devices Devices from BARTEC / MOTOROLA equipped with lasers complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007, EN60825-1: 2007 and IEC60825-1 (Ed. 2.0) The laser classification is marked on one of the labels on the device. Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. CAUTION Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. 6.3.3 LED Devices Complies with IEC/EN60825-1:2001 & IEC/EN62471:2006. 6.3.4 Regulatory information for wireless devices The use of wireless devices is possibly forbidden or restricted. This applies primarily on board aircraft, in hospitals, in the vicinity of explosive substances or under other hazardous conditions. If you are not sure which regulations apply to the use of the device, ask permission before switching it on. Radio Modules The device contains approved radio module(s). These module(s) are identified below. BARTEC / Motorola radio module supporting WLAN 802.11 a/b/g/n and Bluetooth. Type(s): 21-148603-0B Bluetooth® Wireless Technology This is an approved Bluetooth® product. For more information or to view End Product Listing, please visit https://www.bluetooth.org/tpg/listings,cfm Country Roaming This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. Ad-Hoc Operation (5 GHz Band) Ad-Hoc operation is limited to Channels 36-48 (5150 - 5250 MHz). Use of this band is restricted to Indoor Use Only, any other use will make the operation of this device illegal.
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Operation Subject to technical changes. 04/2013 Frequency of Operation – FCC and IC 5 GHz Only The use in the UNII (Unlicensed National Information Infrastructure) band 1 5150 -5250 MHz band is restricted to Indoor Use Only; any other use will make the operation of this device illegal. Industry Canada Statement Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Avertissement: Le dispositive fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les memes canaux. Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bands 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. 2.4 GHz Only The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware. Radio Frequency Interference Requirements - FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Note according to 15.21 Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Operation Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 Radio Transmitters (Part 15) This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Radio Transmitters This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Label Marking: The Term "IC:" before the radio certification only signifies that "Industry Canada" technical specifications were met. Country approvals Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe. Detailed information on the test symbol for other countries is provided in the EC declaration of conformity.  Note: For 2.4-GHz-products: Europe covers, Belgium, Bulgaria, Denmark, Germany, Estonia, Finland, France, Greece, Great Britain, Ireland, Iceland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Austria, Poland, Portugal, Romania, Sweden, Switzerland, Slovakia, Slovenia, Spain, Czech Republic, Hungary and Cyprus.
Operation Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 6.4 Electromagnetic fields 6.4.1 International Reducing RF Exposure – Use Properly Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on “International” human exposure to electromagnetic fields refer to the BARTEC and Motorola Declaration of Conformity (DoC) at http://www.motorolasolutions.com/doc. For further information on the safety of RF energy from wireless devices – see http://responsibility.motorolasolutions.com/index.php/downloads/, located under Wireless Communications and Health. Europe Handheld Devices This device was tested for typical body-worn operation. Use only BARTEC Motorola tested and approved belt-clips, holsters, and similar accessories to ensure EU Compliance. US and Canada Co-located statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filling. Handheld Devices This device was tested for typical body-worn operation. Use only BARTEC Motorola tested and approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt-clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided.
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Operation Subject to technical changes. 04/2013 The MC92N0ex should only be worn on the body when switched off. 6.4.2 Handheld devices To comply with the FCC guidelines for high frequency devices, the aerial of the transmitter should be used in the direct vicinity of, or in an operation unit with, other transmitters/aerials with the exception of those approved in this document. SD card The SD card slot provides a secondary, non-volatile memory. The slot is located at the side of the MC92N0ex (see figure). Further information is provided in the documentation supplied with the card. Observe the manufacturer’s recommendations on use.
Operation Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 6.5 Optimise operating times/change energy settings (WEH 6.5.3 only) Factory settings of the MC92N0ex for the WWAN and WLAN radio devices: ON. 6.5.1 Automatic shutdown in the case of lengthy standby periods Symbols In the start menu under: > Settings symbol > System symbol > Power symbol > Advanced tab > Activate “Turn off device if not used for” box and select a value from the dropdown list. > Confirm selection with “OK”. 6.5.2 Change display backlight (increases the operating time of the battery) Symbols In the start menu under: > Settings symbol > System symbol > Backlight symbol > Battery Power tab > Activate “Disable backlight if device is not used for” box and select a value from the dropdown list. > Brightness tab > Select Disable backlight option. The brightness of the backlight can be regulated with a controller. > Confirm selection with “OK”.
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Operation Subject to technical changes. 04/2013 6.5.3 Change keypad background lighting (increases the operating time of the battery) Symbols In the start menu under: > Settings symbol > System symbol > Keylight symbol > Battery Power tab Activate “Disable keylight if device if not used for” option and select a value from the dropdown list. > Advanced tab Select “Disable keylight” option. The brightness of the backlight can be regulated with a controller or switched off. > Confirm selection with “OK”.
Operation Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 6.5.4 Switch off radio connections Products with Bluetooth® Wireless technology: This device is an approved Bluetooth® product. Further information is available at http://www.bluetooth.org/tpg/listings.cfm Manufacturer: MOTOROLA Symbols Windows Mobile 6.5.3 devices have a simple and central possibility in the form of the Wireless Manager to deactivate and configure all wireless functions of the device. In the start menu under: > Settings symbol > System symbol > Connections symbol > Wireless Manager symbol Activate/deactivate wireless connection: > activate respective button. > All button Wireless connections depend on the configuration. 6.6 Software versions Existing software versions and operating systems in the MC92N0ex: The software is not relevant to the explosion protection of the device. See the MOTOROLA documentation for further information. 6.6.1 OEM Symbols In the start menu under: > Settings symbol > System symbol > System Info symbol > System tab
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Operation Subject to technical changes. 04/2013 6.6.2 Storage battery Symbols In the start menu under: > Settings symbol > System symbol > About symbol > Version tab The last part of the build number contains storage battery number. 6.6.3 Bluetooth Symbols In the start menu under: > Moto BT UI Information symbol > My Device Information symbol The MC92N0ex with Bluetooth technology uses either the StoneStreet Bluetooth stack or the Microsoft Bluetooth stack. To write an application that uses the StoneStreet One Bluetooth stack APIs refer to the Motorola Solutions Enterprise Mobility Developer Kit (EMDK) Help. Further information is provided in the MOTOROLA “User Manual on Integration”.
Operation Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 6.6.4 “Fusion”software Symbols In the start menu under: > Wireless Companion symbol > Wireless Status symbol > Point 7 “Versions”
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Faults and troubleshooting Subject to technical changes. 04/2013 7. Faults and troubleshooting DANGERThere is a risk of fatal injury in an explosive atmosphere!  Examine defective devices and any accessories only outside the potentially explosive atmosphere. Information on fault rectification is provided in the User Manual or the Integration Manual from MOTOROLA. http://www.motorola.com/Business/US-EN/Enterprise+Mobility on the MOTOROLA website. MOTOROLA website for the MC 9200 manuals for the non-Ex protected version  Support  Mobile Computer, Barcode Scanners & RFID => Get Product Manuals  Product Manuals  Mobile Computers  MC 9200  Click on “More” to obtain the complete list. 7.1 Resetting the MC92N0ex 7.1.1 Windows Embedded Handheld and Windows CE Devices If the applications stop working while the MC92N0ex is used, it is recommendable to reboot the device. There are two re-booting functions: warm boot and cold boot. If these types of rebooting don’t help, the MC92N0ex operating system can be reset to the factory defaults by a clean boot.  A warm boot starts the MC92N0ex again and shuts down all running programs.  A cold boot also restarts the MC92N0ex, but erases all stored records and entries in RAM. Data saved in flash memory or a memory card is not lost. In addition it returns formats, preferences and other settings to the factory default settings.  A clean boot restores the operating system to the factory defaults. WARNING
Faults and troubleshooting Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 Incorrect handling may cause damage to property! Data stored in the flash memory or on a memory card is not lost. First perform a warm boot. The MC92N0ex is re-started and all stored data records and entries are preserved. If the MC92N0ex still does not respond after a warm boot, perform a cold boot. 7.1.2 On a Windows CE 7.0 device WARNING Incorrect handling may cause damage to property! Do not hold down any key, other than the Power button during a reset. Performing a cold boot restores formats, preferences and other settings to the default settings. Any data previously synchronized with a computer can be restored during the next ActiveSync operation. 7.1.3 Warm boot Executing a warm boot Hold down the Power button for approximately five seconds. As soon as the MC92N0ex starts to perform a warm boot release the Power button. 7.1.4 Cold Boot Executing a cold boot A cold boot restarts the MC92N0ex and erases all user stored records and entries that are not saved in flash memory (Application and Platform folders) or a memory card. Never perform a cold boot unless a warm boot does not solve the problem. To perform a cold boot: 10. Press the red Power button. The PowerKey Action window appears. 11. Tap Safe Battery Swap. 12. Press the primary battery release on the MC92N0ex to partially eject the battery from the MC92N0ex. (described in chapter 5.4.1 Insert battery) 13. While the battery is partially released, simultaneously press and release the handle trigger and the Power button. 14. Push the battery to fully re-insert it in the MC92N0ex. One audible click can be heard as the battery is fully inserted. 15. The MC92N0ex reboots. 16. Calibrate the screen. See Calibrating the Screen in the Motorola User Guide to calibrate the MC92N0ex screen.
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Faults and troubleshooting Subject to technical changes. 04/2013 7.1.5 On a Windows Embedded Handheld 6.5.3 device WARNING Incorrect handling may cause damage to property! Do not hold down any key, other than the Power button during a reset. Performing a cold boot restores formats, preferences and other settings to the default settings. Any data previously synchronized with a computer can be restored during the next ActiveSync operation. Data saved in flash memory or a memory card is not lost. Perform a warm boot first. This restarts the MC92N0ex and saves all stored records and entries. If the MC92N0ex still does not respond, perform a cold boot. 7.1.6 Warm boot Executing a warm boot Hold down the Power button for approximately five seconds. As soon as the MC92N0ex starts to perform a warm boot release the Power button. 7.1.7 Cold Boot Executing a cold boot A cold boot restarts the MC92N0ex and erases all user stored records and entries that are not saved in flash memory (Application and Platform folders) or a memory card. Never perform a cold boot unless a warm boot does not solve the problem. To perform a cold boot: 17. Press the red Power button. The PowerKey Action window appears. 18. Tap Safe Battery Swap. 19. Press the primary battery release on the MC92N0ex to partially eject the battery from the MC92N0ex. (described in chapter 5.4.1 Insert battery) 20. While the battery is partially released, simultaneously press and release the handle trigger and the Power button. 21. Push the battery to fully re-insert it in the MC92N0ex. One audible click can be heard as the battery is fully inserted. 22. The MC92N0ex reboots.
Faults and troubleshooting Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 7.1.8 Clean Boot WARNING Incorrect handling may cause damage to property! Do not hold down any key, other than the Power button during a reset. Performing a cold boot restores formats, preferences and other settings to the default settings. A clean boot resets the MC92N0ex to the factory default settings. All data in the Application folder is retained. You must download the Clean Boot Package file from the Support Central web site by Motorola 23. Download the Clean Boot Package from the Motorola Support Central. Follow the instructions included in the package for installing the package onto the MC92N0ex. 24. Press the red Power button. The PowerKey Action window appears. 25. Tap Safe Battery Swap. 26. Press the primary battery release on the MC92N0ex to partially eject the battery from the MC92N0ex. (described in chapter 5.4.1 Insert battery) 27. While the battery is partially released, simultaneously press and release the trigger and the Power button. After you insert the battery you have two seconds to press the trigger or left scan button. 28. Push the battery to fully re-insert it in the MC92N0ex. One audible click can be heard as the battery is fully inserted. 29. Press and hold the trigger. 30. Connect the MC92N0ex to AC power using the CAM or insert the MC92N0ex into a powered cradle. 31. The MC92N0ex updates and then re-boots. 32. The calibration screen appears.
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Service, inspection, repair Subject to technical changes. 04/2013 8. Service, inspection, repair Commissioning and service of Mobile Computers may be conducted exclusively by trained and qualified staff! The staff is familiar with the installation, assembly, commissioning and operation of the Mobile Computers, has been informed about the risks and has the qualifications necessary for this work. 8.1 Service intervals The mechanical state of the device should be regularly checked. The service intervals will depend on the ambient conditions. We recommend that a service be conducted at least once a year. Regular servicing is not necessary if the device is correctly operated in accordance with the installation instructions and under appropriate consideration of the ambient conditions. DANGERPrevent electrostatic charging in potentially explosive atmospheres. There is a risk of fatal injury in an explosive atmosphere!  Do not dry wipe or clean devices. 8.2 Inspection According to EN 60079-17 and EN 60079-19, the owner/operator of electrical plants in potentially explosive atmospheres is obliged to have these plants checked by an electrician to ensure that they are in a correct condition. 8.3 Service and repair work In addition to Directive 99/92/EC, the standards EN 60079-17 and EN 60079-19 also apply to the servicing and repair as well as the testing of accompanying operating devices. Work connected with assembly/dismantling, operation and servicing may only be conducted by trained specialists. All statutory requirements and other binding guidelines on occupational health and safety, accident prevention and environmental protection must be observed. 8.3.1 Information on sending in for repairs The following information is required for the repair.  Series number of the device (see manufacturer’s label)  Model number or product name (see manufacturer’s label)  Software type and version number (see Chapter 6.7)
Repair, disposal, forwarding and packaging Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Subject to technical changes. 04/2013 Please read through the handling guidelines for the RMA process before you send in a defective device for repair. Then complete the RMA form (Return Merchandise Authorization), sign it and send it to our “Returns Centre”. E-Mail: services@bartec.de Fax: +49 7931 597-119 We cannot guarantee the processing within the contractually agreed period for any returns received by us without RMA number. The handling guidelines and the RMA form are available for download from our website: http://www.bartec.de > Quality and culture > RMA form If you have any questions, please send us an e-mail or give us a call. E-Mail: services@bartec.de Telephone: +49 7931 597-444 9. Disposal The Mobile Computers contain metallic and plastic parts and electronic components. The statutory requirements for electrical scrap must be observed for disposal, e.g. disposal by an authorised disposal company. 10. Forwarding and packaging information ATTENTION Sensitive devices! Damage may be caused by incorrect packaging!  Use original packaging for transport. Manufacturer’s label
Mobile Computer MC 92N0ex Type 17-A1A.-………… and Type B7-A2A.-………… Certificate of Compliance Subject to technical changes. 04/2013 11. Accessories

Navigation menu