BAYCOM OPTO ELECTRONICS TECHNOLOGY EK20H WLAN IP CAM User Manual K20 QIG v14

Download:
Mirror Download [FCC.gov]
Document ID	2851454
Application ID	uMel72rjIXL5weScY766hA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	111.06kB (1388241 bits)
Date Submitted	2015-12-22 00:00:00
Date Available	2015-12-24 00:00:00
Creation Date	2015-11-10 10:40:45
Producing Software	Adobe PDF library 10.01
Document Lastmod	2015-11-23 08:59:46
Document Title	K20_QIG_v14
Document Creator	Adobe Illustrator CS6 (Windows)

Baycom
K20H(K20,K20S,K20K)
Side View
1. Package Contents
Camera / Mounting Bracket / AC Power Adapter
/ Mounting Screws / Quick Installation Guide
13
2. Physical Descriptions
Front View
14
1. Lens
2. IR LED
(Night vision function)
3. Network LED Indicator
4. Power LED indicator
5. Built-in Microphone
6. Speaker inside
7. PIR Sensor (Optional)
K20H Series
Wi-Fi
HD IP Camera
Back View
Quick Installation Guide
11
12
13. Audio jack (Optional)
14. Micro SD Card Slot
10
8. Camera UID (Optional)
9. RJ-45 Network port
10. WPS button
11. DC5V-IN Socket
12. Reset button
A. Wired setup
a. Connect a network cable to the network port,
which is on the back of Camera and a LAN
port of the router.
b. Then plug the power adapter of Camera to
power on the camera.
b. Press the WPS button (on the lower back of
Camera) for 4 seconds until its LED blinks.
Then press the WPS button on your router and
wait for the Wi-Fi connection to be established
(within 10 to 120 seconds).
b. Click Computer
5VDC Power
5VDC Power
ADSL Router
3. Network Requirements
- An ADSL modem with Internet connection.
- A broadband router, preferably with Wi-Fi
capability. Please make sure DHCP is enabled
on your router.
ADSL Router
Push WPS button
on the router and camera
Ethernet Cable
4. Install the hardware and connect with PC
Before connect camera to the Internet, please
check if your router has a WPS button, and then
follow the WPS setup. If not (or unsure), please
follow the wire setup.
B. Wireless setup via WPS
Note：Please unplug the network cable for
Camera WPS setup.
a. Plug the power adapter and power on your
Camera then wait for 40 seconds to boot the
camera (operating system).
C. Viewing camera video image through I.E.
Browser
a. In order to successfully install the camera,
make sure you have these followings:
- DHCP is enabled on your Wi-Fi router.
- Please link to the below hyperlink to download
and Install the Plug-in file in your PC.
(http://www.ucamsee.com/webe/html/news/02.
php?num=33&page=1&kind=8)
- Make sure your camera and PC in the same
network segment.
c. Click network icon, then double click the UCAM
(xx.xx.xx.xx.xx.xx)(xx.xx.xx.xx),
Windows will automatically open the browser
(please select IE browser).
P/N:2IGOK20H0111
d. Enter your Username and Password to log-in to
the IP camera. (Default is admin / 888888)
e. You will get the Live Video Image.
f. For further advanced setting, please click fix
tool
to adjust the detail parameters.
5. IP Camera Connection via P2P (Optional):
a: Download APP “Smart-Cam” from Google
Play / Apple Store or scan QR code to install it.
iOS
Android
b: Download “Barcode Scanner” to scan UID
from Google Play or Apple Store.
c: Open ”Smart-cam” and “Click here to add
camera” by scanning QR code on the back
of Camera to get the UID.
d: Enter Password (default 888888) then press
OK to add your camera.
e: Once you have seen the status of your Camera
is Online and then you can and watch the live
video right away.
D. If still can’t get the live video image
via IE browser. How can I do?
Please remove Plug-in file then download and
install it again.
E. The maximum recording time of 32GB Micro
SD Card is 71 hours (about 2.9 days) with the
highest resolution.
6. Frequently Asked Questions
A. How to move your Camera to a new
environment：
- Wired mode：Remove the power adapter of
Camera & follow the Wired setup of step 2.
- Wi-Fi mode：Remove the power adapter of
Camera and follow the Wi-Fi setup of step 2.
B. If you are still having difficulty, you may
attempt to perform a factory reset on your
Camera. With the power on, press the RESET
button on the back of your Camera for 10
seconds and then proceed to setup your
camera from the beginning again.
C. Camera can support up to 32GB (FAT32) Micro
SD Card for recording storage.
F. LED indicator & Speaker definition:
No.
Cata
Camera Initialize
Network Connection
WPS Enable
AP Mode
Reset to Default
Start to upgrade new Firmware
Firmware upgrade on-going
Power LED
Orange color
ON
Network LED
Speaker
Green color
----ON
--Flash
--Slow Flash
----3 Beeps Sound
--1 Beeps Sound
Fast Flash
---
G. Please power off your camera and pull the
adapter before you insert the SD card to make
sure the recording video files can well storage.
FCC Compliance and Advisory Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radion/TV
technician for help.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate this equipment.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co‐located or operating in
conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a
minimum distance of 20 centimeters between the
radiator and your body.
Wall Mount Guidance
1:1
65mm
75mm
20mm

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Create Date                     : 2015:11:10 10:40:45+09:00
Creator                         : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2015:11:23 08:59:46+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : K20_QIG_v14
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Metadata Date                   : 2015:11:23 08:59:46+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 176
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 19086 bytes, use -b option to extract)
Rendition Class                 : proof:pdf
Original Document ID            : uuid:65E6390686CF11DBA6E2D887CEACB407
Document ID                     : xmp.did:6C124B505487E511B5319D07D891A40E
Instance ID                     : uuid:92bf26ff-43d1-4a6d-9c06-2bac12ad7db0
Derived From Instance ID        : xmp.iid:6B124B505487E511B5319D07D891A40E
Derived From Document ID        : xmp.did:6B124B505487E511B5319D07D891A40E
Derived From Original Document ID: uuid:65E6390686CF11DBA6E2D887CEACB407
Derived From Rendition Class    : default
History Action                  : saved, saved
History Instance ID             : xmp.iid:F87F117407206811822A92EE1313058D, xmp.iid:6C124B505487E511B5319D07D891A40E
History When                    : 2014:03:13 16:05:57+08:00, 2015:11:10 10:40:37+08:00
History Software Agent          : Adobe Illustrator CS6 (Macintosh), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : D:\Elka_Works\Baycom\For iOS.png, D:\Elka_Works\Baycom\For Android.png, C:\Users\user\Desktop\未命名-1.jpg, D:\Elka_Works\Baycom\For iOS.png, C:\Users\user\Desktop\restart.jpg, C:\Users\user\Desktop\2.jpg, C:\Users\user\Desktop\777.jpg, C:\Users\user\Desktop\3.jpg
Startup Profile                 : Web
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : True
Max Page Size W                 : 479.999986
Max Page Size H                 : 129.999989
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, Arial-Black, Calibri, Calibri-Bold, Calibri-BoldItalic, MyriadPro-Regular, MyriadPro-Bold, TimesNewRomanPSMT, KozGoPr6N-Regular
Font Family                     : Arial, Arial, Arial Black, Calibri, Calibri, Calibri, Myriad Pro, Myriad Pro, Times New Roman, 小塚ゴシック Pr6N
Font Face                       : Regular, Bold, Regular, Regular, Bold, Bold Italic, Regular, Bold, Regular, R
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 3.00, Version 3.00, Version 2.35, Version 1.02, Version 1.02, Version 1.02, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 3.00, Version 6.014;PS 6.005;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False, False, False, False, False, False, False
Font File Name                  : arial_0.ttf, arialbd_0.ttf, ariblk_0.ttf, CALIBRI_0.TTF, CALIBRIB_0.TTF, CALIBRIZ_0.TTF, MyriadPro-Regular_0.otf, MyriadPro-Bold_0.otf, times_0.ttf, KozGoPr6N-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE Red 032 C
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants L       : 55.294098
Swatch Groups Colorants A       : 72
Swatch Groups Colorants B       : 43
Swatch Groups Group Name        : Web Color Group
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: R=189 G=204 B=212
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 30.468798
Swatch Groups Colorants Magenta : 15.625000
Swatch Groups Colorants Yellow  : 14.453101
Swatch Groups Colorants Black   : 0.000000
Producer                        : Adobe PDF library 10.01
Page Count                      : 2

EXIF Metadata provided by EXIF.tools