Manual
In the box
• PayAnywhere credit card reader
• USB power cable
• PayAnywhere lanyard
Getting started
1. Apply for a PayAnywhere account.
2. Download the free app.
3. Start accepting credit cards upon account
approval.
Instructions
1. Plug the PayAnywhere credit card reader into
the audio headset port of your mobile device.
2. SET DEVICE VOLUME TO MAXIMUM LEVEL.
To power the card reader, you must maximize
the volume on your phone. If your phone is not
on maximum volume, the encrypted card reader
will not work.
3. Launch the PayAnywhere app on your device.
4. Follow the on-screen instructions to begin
processing transactions.
© 2015 PayAnywhere, LLC. All rights reserved. PayAnywhere (“PA”) is a registered ISO of Wells Fargo Bank, N.A., Walnut Creek, CA. American Express may
require separate approval. PA is currently available only in the United States. Requires download of free PA app, approved merchant account, acceptance of
terms and conditions, compatible device, and wireless service. Visit PayAnywhere.com/faq for a list of compatible devices and promotional details. Funds
usually deposited into your account within 1 business day. Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and
other countries. Apple Pay and Touch ID are trademarks of Apple Inc. Other designated trademarks and brands are the property of their respective owners.
Designed in the USA. Manufactured in China.
Power instructions
Operating (green light flashing)
Low battery (red light flashing)
Charging (red light on)
Fully charged (green light on)
Limited warranty
Your PayAnywhere card reader has a 12-month
limited warranty. By using the reader on your
mobile device, you reaffirm your acceptance
of PayAnywhere’s terms, conditions, and
disclaimers.
FCC Declaration of Conformance
This device complies with Part 15 of the FCC
Rules.
Welcome to PayAnywhere.
payanywhere.com/faq
Customer Service at 877.387.5640
custservice@payanywhere.com
Magnetic stripe transactions
Make sure the magnetic stripe is
turned towards the large end of the
card reader, so that the magnetic
stripe and indicator lights are
facing towards you.
EMV transactions
Make sure the electronic chip
is turned towards the large end
of the card reader and inserted
downwards, so that the electronic
chip and indicator lights are facing
towards you.
Contactless NFC transactions
Hold an NFC-enabled device or
credit card so that it touches the
large end of the PayAnywhere card
reader. Holding a device too far
may result in a failed connection.
Swiping tips
Maximize your device volume when you launch the app and insert the card reader. Ensure that
speakerphone is turned off. If your device has a case or protective sleeve, make sure it is not preventing
the card reader from being fully plugged in.
EMV capability coming soon.
FCC Caution Statements:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.