BBPOS S1701 Chip & Swipe Reader User Manual ChipperBT QSG Eng 20160923
BBPOS International Limited Chip & Swipe Reader ChipperBT QSG Eng 20160923
BBPOS >
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3403826 |
| Application ID | qgRSg46Moq16VWcJM2BB2Q== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 60.41kB (755181 bits) |
| Date Submitted | 2017-05-26 00:00:00 |
| Date Available | 2017-05-26 00:00:00 |
| Creation Date | 2016-09-23 15:59:34 |
| Producing Software | Adobe PDF library 15.00 |
| Document Lastmod | 2016-09-23 15:59:34 |
| Document Title | ChipperBT_QSG_Eng_20160923 |
| Document Creator | Adobe Illustrator CC 2015 (Windows) |
Chipper™ BT Bluetooth® Magstripe and EMV Card Reader Package Contents Quick Start Procedures Device USB cable Lanyard Quick start guide STEP 2 X1 X1 X1 X1 Turn on the device pairing function of your smartphone/tablet. Then, press “ ” to turn on the Chipper™ BT. Application Download & Installation Bluetooth ON **Please ensure that Bluetooth® function of your smartphone/tablet is ON before device pairing. This device can support iOS (iOS 6.0 or above), Android (Android 2.1 or above), Windows Phone 8 & MS Windows. 1. Please visit APP Store or Google Play Store to download the official application before operation . 2. Please follow APP instructions to register and login for proper operation. 3. For any questions, please contact the official application developer. Support Operating System: iOS, Android, Windows Phone 8, MS Windows STEP 3 Select Chipper™ BT in the Scanned Device List on your smartphone/tablet. Then, your Chipper™ BT is connected and green LED will ON. Scanned Device List www.bbpos.com For magstripe card reading You can follow your application instruction to start the transaction process, then swipe/insert card to complete the transaction. STEP 1 For EMV card reading Download the official application from APP Store or Google Play Store. LED Light Connect Micro USB charging cable to charge the device as shown to the right. Lanyard holder Power button STEP 4 Quick Start Procedures Index & Accessories (Fig.1) reset button Micro USB port for charging operation ** Chipper™ BT is powered by an internal Lithium Polymer rechargeable battery pack that cannot be removed or replaced. Before first use, charging is required for approximately two to three hours. To prevent potential electrical damage to the Chipper™ BT , please be recommended to use the Micro USB cable provided with the packaging only.** APP DOWNLOAD **If your Chipper™ BT cannot be successfully paired with your device, please access the Setting screen on your phone to choose “BT Chipper” in device list to pair accordingly.** Cautions & Important Notes • Ensure to turn on the Bluetooth® function of your smartphone or tablet before use. • Please fully charge your Chipper™ BT before use. • Please ensure magstripe/EMV chip of the card is facing the right direction when swiping or inserting card. • Don’t drop, disassemble, tear, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign object into the device. Doing any of which will void the Warranty. • Don’t immerse the device into water and place near washbasins or any wet locations. Don’t spill any food or liquid on the device. Don’t attempt to dry the device with external heat sources, such as microwave or hair dryer. • Don’t use any corrosive solvent or water to clean the device. Recommend using dry cloth to clean the surface only. • Don’t use any sharp tools to point the internal components or connectors, doing which may lead to malfunction and void the Warranty. • Don’t try to disassemble the device to repair. Please contact your dealer for repair and maintenance. Product Specifications Functions • EMV/PBOC Chip Card Reader (ISO 7816 Compliant Class A, B, C card) • Magnetic Stripe Card Reader Dual tracks (track 1 & 2 or track 2 & 3) Communication Interface Bluetooth® 4.0, USB Power & Battery Lithium polymer rechargeable battery 125mAH, 3.7V Charging Via micro USB Swipe Speed 15cm - 100cm/sec LED Indicator Operating – green light flashing Low battery level – red light flashing Charging – red light ON Fully charged – green light ON Support Operating System Android 2.1 or above, iOS 6.0 or above Windows Phone 8, MS Windows Product Size 61.8mm (W) x 44.5mm (H) x 14.2mm (D) Product Weight 29.8g Operating Temperature 0°C – 45°C (32°F – 113°F) Operating Humidity Max 95% Storage Temperature -20°C – 55°C (-4°F – 131°F) Storage Humidity Max 95% Troubleshooting Problems Device cannot be paired Recommendations • Please press the power on button to restart your device. • Please check if you can find the device’s “Serial Number” (Shown on the back of device) in the “Scanned Device List” of your smartphone or tablet. Device cannot read your card successfully • Please press the power on button to turn on the device again. The device will automatically connect with your smartphone or tablet again. • The device may be at lower battery level, please use the USB cable to recharge it, then retry. • Please ensure the device or smartphone/tablet is within the reception range. Device lost the connection with your smartphone or tablet when the device is auto-off. • Please press the power on button to turn on the device again. The device will automatically connect with your smartphone or tablet again. • The device may be at lower battery level, please use the USB cable to recharge it, then retry. • Please ensure the device or smartphone/tablet is within the reception range. Device does not work with your phone or tablet • Please ensure the Bluetooth® function of your smartphone or tablet is turned on. • Please check the version of your operating system is supported for this device’s operation. Device cannot read your card successfully • Please check if the device has power when operating and ensure devices are connected. • Please check if the application instructs to swipe or insert card. • Please ensure there is no obstacle in the card slots. • Please check if the magstripe or chip of the card is facing the right direction when swiping or inserting card. • Please ensure your phone/tablet is supported model for this device’s operation. • Please swipe or insert card with a more constant speed. Device has no response • Please use a paper clip to press the reset button at the bottom for reboot. Warranty • Any damage or defects caused by a failure to follow the instruction which relate to this device or as the result of an accident, abuse, misuse, misapplication, product modification, improper voltage or current, acts of God, shipping damages or loss, or damage caused by service performed by anyone other than our company are expressly excluded from the warranty stated below. • We are not under any obligation to support the device for all operating environments, including but not limited to, interoperability with all current and/or future versions of software or hardware. • Please contact the dealer for any warranty or customer support services. FCC Caution Statements: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Need Help? E: sales@bbpos.com | T: +852 3158 2585 Room 1602, 16/F, Tower 2, Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, Hong Kong www.bbpos.com ©2016 BBPOS Limited. All rights reserved. BBPOS and Chipper™ are either trademark or registered trademarks of BBPOS Limited. iOS is the trademark of Apple Inc. Android™ is a trademark of Google Inc. Windows® is registered trademark of Microsoft Corporation in the United States and/or other countries. All details are subject to change without prior notice. Revise v.5 / 20160923
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42 Format : application/pdf Title : ChipperBT_QSG_Eng_20160923 Creator Tool : Adobe Illustrator CC 2015 (Windows) Create Date : 2016:09:23 15:59:34+09:00 Modify Date : 2016:09:23 15:59:34+08:00 Metadata Date : 2016:09:23 15:59:34+08:00 Thumbnail Width : 256 Thumbnail Height : 64 Thumbnail Format : JPEG Thumbnail Image : (Binary data 6685 bytes, use -b option to extract) Original Document ID : uuid:9E3E5C9A8C81DB118734DB58FDDE4BA7 Document ID : xmp.did:edeec807-4d09-c649-9672-2f3b090c3fb0 Instance ID : uuid:334caee6-4431-4630-ad3c-b1e204f93649 Rendition Class : proof:pdf Derived From Instance ID : uuid:7af14c9a-51ed-4b50-b02a-3af894e3e331 Derived From Document ID : xmp.did:d28db3b2-37e4-634e-8775-9996f838db0d Derived From Original Document ID: uuid:9E3E5C9A8C81DB118734DB58FDDE4BA7 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:7A1C61CF0229E411AD53A74D56CB1830, xmp.iid:edeec807-4d09-c649-9672-2f3b090c3fb0 History When : 2014:08:21 15:14:37+08:00, 2016:09:23 15:59:28+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CC 2015 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference Manifest Reference File Path : C:\Users\ruth.diu\Desktop\Ruth Job\Products\Chipper BT\links\BT Chipper_per1_BW.psd Manifest Reference Document ID : adobe:docid:photoshop:ca45a3b1-18d3-11e6-afc3-8dac7b104a09 Manifest Reference Instance ID : xmp.iid:d285db89-2858-3147-b21f-8c3b9824e9db Ingredients File Path : C:\Users\ruth.diu\Desktop\Ruth Job\Products\Chipper BT\links\BT Chipper_per1_BW.psd Ingredients Document ID : adobe:docid:photoshop:ca45a3b1-18d3-11e6-afc3-8dac7b104a09 Ingredients Instance ID : xmp.iid:d285db89-2858-3147-b21f-8c3b9824e9db Startup Profile : Basic RGB N Pages : 1 Has Visible Transparency : True Has Visible Overprint : False Max Page Size W : 234.000000 Max Page Size H : 138.000000 Max Page Size Unit : Millimeters Font Name : Klavika-Medium, MyriadPro-Light, MyriadPro-Regular, MyriadPro-Semibold, MyriadPro-Bold Font Family : Klavika, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro Font Face : Medium, Light, Regular, Semibold, Bold Font Type : Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 3.003, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329 Font Composite : False, False, False, False, False Font File Name : Klavika-Medium.otf, MyriadPro-Light.otf, MyriadPro-Regular.otf, MyriadPro-Semibold.otf, MyriadPro-Bold.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants L : 36.470589 Swatch Groups Colorants A : 0 Swatch Groups Colorants B : -3 Swatch Groups Group Name : Grays Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: R=242 G=242 B=242 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 3.704900 Swatch Groups Colorants Magenta : 2.508600 Swatch Groups Colorants Yellow : 2.508600 Swatch Groups Colorants Black : 0.000000 Producer : Adobe PDF library 15.00 Page Count : 2 Creator : Adobe Illustrator(R) 17.0 For : ruth.diu, Bounding Box : 68 -624 1833 -185 Container Version : 11 Creator Version : 19EXIF Metadata provided by EXIF.tools