BBPOS WISEPAD2 WisePad 2 User Manual WP2 IM Eng 20151119

BBPOS International Limited WisePad 2 WP2 IM Eng 20151119

Contents

User Manuel

Quick Start Procedures
Quick Start Procedures
STEP 1
This device can support iOS (iOS 5.0 or above), Android
(Android 2.1 or above), Windows Phone 8 & MS Windows.
Download ocial application from app stores.
APP
DOWNLOAD
APP
DOWNLOAD
STEP 2
Turn on the device pairing function of your
smartphone/tablet. Then, press and hold
“ ” to turn on WisePad until “STANDBY”
displays on the LCD.
**Please ensure that Bluetooth® function of
your smartphone/tablet is ON before devices
pairing.
STEP 3
Press “ ” to enter the Setting Menu, then press “1”
for Bluetooth pairing.
Scanned
Device List
STEP 4
Select WisePad 2 in the Scanned Device List on your
smartphone/tablet. Then, your WisePad 2 will show the
Home Menu when the devices are paired.
**For rst time pairing, you need to follow the instructions to input
“PASSKEY” to complete pairing with your Android devices.
STEP 5
You can follow your application instruction
to start the transaction process, then
tap/swipe/insert the payment card and
input PIN (per request) to complete the
transaction.
**Remarks: If you pay via swiping card or inserting
EMV IC card, please ensure that the magstripe or
EMV chip of the card is facing the right direction. If
you pay by using NFC card, please ensure you tap
the NFC payment card within 4cm range on top of
the NFC marking.**
00 XXXX 5522
Valid
Thru 00/00
ALDSON
CARD
1100 2200 XXXX 5522
Member
Since 00 Valid
From 00/00 Valid
Thru 00/00
JIMMY DONALDSON
CREDIT CARD
NFC LED indicators
LED indicator
Power on / Setting
Up and Down buttons
CLEAR & ENTER Buttons
Lanyard hole
For magstripe
card reading
with LED indicator
Secured PIN pad
for PIN input
LCD display
CANCEL button
For EMV card reading
with LED indicator
Index & Accessories (Fig.1) Index & Accessories (Fig.1)
FRONT
Reset button
SAM card slots
Package Contents
Device x 1
Lanyard x 1
USB cable x 1
Instruction Manual x 1
BACK
NFC Status Indicators
First LED ON
Ready for tapping card
LEDs ON in ascenging order
Reading card information
4 LEDs ON + “Beep”
Card reading process
successfully completed
First LED ON + “Beep”
Transaction completed
First LED ashing
Standby mode
Error, please retry
Error, please retry
~Beep~
~Beep~
~Beep~
1100 2200 XXXX
Member
Since
00
Valid
From
00/00
Valid
Thru
00/00
Cardholder Na
CREDIT CARD
1100 2200 XXXX
Member
Since
00
Valid
From
00/00
Valid
Thru
00/00
Cardholder Na
CREDIT CARD
~Beep~
Fig. 3c - Home Menu
Fig. 3a - Bluetooth® Pairing
Fig. 3d - Connecting WiFi
Fig. 3e - Connecting GPRS
Fig. 3b - Passkey Screen
i. Bluetooth® connection
Enter the Bluetooth® pairing mode (Fig. 3a) after pressing “1”.
**For rst time pairing, you may need to input “PASSKEY” to complete
the pairing process with your Android devices. (Fig 3b)
After device is successfully paired, WisePad 2 will enter the
Home Menu (Fig. 3c).
ii. WiFi network connection
Enter the WiFi network connecting mode (Fig. 3d) after
pressing “2”.
After network is successfully connected, WisePad 2 will enter
the Home Menu (Fig. 3c).
iii. GPRS connection
Please ensure the SAM/SIM cards are properly inserted to
card slots before GPRS connection.
Enter the GPRS network connecting more (Fig. 3e) after
pressing “3”. After network is successfully connected,
WisePad 2 will enter the Home Menu (Fig. 3c).
Fig. 1a
Fig. 1b - Setting Menu
Fig. 2 - Connection Menu
Set Up Connection Set Up Connection
STEP 2 (refer to Fig. 3)
Choose connection method, press
“1” to connect via Bluetooth®
“2” to connect WIFI
“3” to connect
STEP 1
Press and hold the Power On/O button to
turn on WisePad 2, then press “ ” to
conrm. (refer to Fig. 1a)
When “STANDBY .....” is shown, press “ ” or
“X” to enter the Setting Menu. (Fig. 1b)
mPOS Solution Combining NFC, MSR
and EMV Chip Reading Functions
WisePad™ 2
www.bbpos.com
Compatable with:
iOS, Android, Windows Phone 8, MS Windows
.JDSP 64# QPSU
GPS DIBSHJOH PQFSBUJPO
Fig. 5a - Choose Payment Method Step 2
Choose Payment Method
Please choose the required payment method to
complete the transaction process:
i. Press “1” to support swiping magnetic stripe
card (Fig. 5b). Follow instruction to swipe your
card.
ii. Press “2” to support inserting ICC card (Fig.
5c). If you are required to input PIN, please
input via secure PIN pad and press “ ” to
conrm.
iii. Press “3” to support tapping NFC card (Fig.
5d). Please ensure you tap the NFC payment
card within 4cm range on top of the NFC
marking. Success tapping will have beep
sound and LED indication.
Remarks: If you pay via swiping card or inserting EMV IC
card, please ensure that the magstripe or EMC chip of the
card is facing the right direction.
Fig. 5b - Ready for swipe card
Fig. 5c - Ready for inserting card
Fig. 5d - Input PIN via PIN pad
Fig. 5e - Ready for tapping card
Sales Operation Sales Operation
Fig. 4a - Input Transaction Amount Step 1
Input Amount
i. In the Home Menu (Fig. 3c), press “1” to enter
SALES page (Fig. 4a).
ii. Input transaction amount (Fig. 4a).
iii. Input tips amount (Fig. 4b) if any, then press
“ ” to conrm input.
iv. Total amount will be shown on display, press
“ ” to ACCEPT or “X” to DECLINE.
**If you need to cancel the transaction, please press “X” to
cancel. “DECLINE” will be shown on the display and back to
SALES page (Fig. 4a) for next transaction.
Fig. 4b - Input Tips Amount
Fig. 4c - Conrm Total Amount
Device cannot read your card
successfully through NFC
reading
Problems Recommendations
Device cannot read your
card successfully
Device has no response
Device cannot be paired
Problems Recommendations
Display turned o
automatically
Device lost the connection
with your smartphone or
tablet when the device is
auto-o.
Troubleshooting Troubleshooting
Room 1602, 16/F, Tower 2, Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, Hong Kong
www.bbpos.com
Need Help?
E: sales@bbpos.com | T: +852 3158 2585
FCC Caution Statements:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
©2015 BBPOS Limited. All rights reserved. BBPOS and WisePad are either trademark or registered trademarks of BBPOS Limited.
IOS is the trademark of Apple Inc. Android™ is a trademark of Google Inc. Windows® is registered trademark of Microsoft
Corporation in the United States and/or other countries. The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by BBPOS Limited is under license. Other trademarks and trade names
are those of their respective owners. All details are subject to change without prior notice.
CAUTION & IMPORTANT NOTES
LCD Message Details
WisePad 2 Message Description
BBPOS WisePad 2 opening screen
STANDBY Waiting for connection via Bluetooth®, WiFi or
GPRS network. WisePad 2 enters “SLEEP MODE”
if no operation for 5 minutes
BLUETOOTH ON Bluetooth® is turned on and pairing with
PAIRING NOW .... smartphone or tablet.
CONNECTING NETWORK .... WiFi or GPRS network is connecting
PROCESSING Transaction is processing
INPUT PIN Enter PIN
INCORRECT PIN Incorrect PIN input, please retry
COMPLETED Transaction is completed
CANCELLATION Transaction is cancelled
TERMINATE Transaction result is terminated
DECLINED Transaction result is declined
MSR SUCCESS Succeeds to swipe card
MSR FAIL Fails to swipe card
NO ICC No ICC card is inserted/detected
NO RESPONSE Time out message for no card is inserted or swiped
INSERT CARD Remind to insert ICC card
SWIPE CARD Remind to insert ICC card
NFC Remind to tap card
ACCEPTED Transaction result is success
POWER OFF? Conrm or decline to turn o the WisePad 2
Product Specications
Product Size 70mm (W) x 108mm (H) x 16.5mm(D)
Product Weight 105g
Power & Battery Lithium Polymer Rechargeable Battery 750mAH,
3.7V
Magstripe Card Reader Triple Track (Track 1, 2 & 3)
Swipe Speed 15cm/sec - 100cm/sec
LED indicator • Operating - green light ashing
• Low Battery Level - red light ashing
• Charging - red light on
• Fully charged - green light on
NFC LED Indicator • Connecting with POS terminal - First LED ashing
• Ready for NFC Reading - First LED on
• Success Reading - 4 LEDs on in ascending order
• Transaction Completed - 4 LEDs on with “BEEP”
• Errors - First LED ash with twice “BEEP”
• Power o - All LEDs o
Communication Interface Bluetooth® v2.1, Bluetooth® v4.0 (iOS)*, USB,
WiFi or GPRS (optional with SAM/SIM cards)
Operating Temperature 0°C - 45°C (32°F - 113°F)
Operating Humidity Max 95%
Storage Temperature -10°C - 55°C (14°F - 131°F)
Storage Humidity Max 95%
*Support only by iPhone 5 or later, iPad 3 or later, iPad Mini or later, iPod Touch 5th generation or later.
• Please press & hold the power on/o button
to restart your device.
• Please check if you can nd the device’s “Serial
Number” (Shown on the back of device) in the
“Scanned Device List” of your smartphone or
tablet.
• The display may turn o after enter the “SLEEP
MODE” to save power. Please press and hold
the power on/o button to restart it.
• The device may be out of power, please use
the USB cable to recharge it, then retry.
• Please press and hold the power on/o button
to turn on the device again. The device will
automatically connect with your smartphone
or tablet again.
• The device may be at lower battery level,
please use the USB cable to recharge it, then
retry.
• Please ensure the device or smartphone/tablet
is within the reception range.
• Please check if your card supports NFC
payment.
• Please ensure if your card is placed within 4cm
range on top of the NFC marking.
• Please take out your NFC payment card from
wallet or purse for payment to avoid any
interference.
• Please check if the device has power when
operating and ensure devices are connected.
• Please check if the application instructs to
swipe or insert card.
• Please ensure that there is no obstacle in the
card slots.
• Please check if the magstripe or chip of the
card is facing the right direction when swiping
or inserting card.
• Please ensure your phone/tablet is supported
model for this device’s operation.
• Please swipe or insert card with a more
constant speed.
• Please use a paper clip to press the reset
button at the back for reboot.
5IJT FRVJQNFOU DPNQMJFT XJUI '$$ SBEJBUJPO FYQPTVSF MJNJUT TFU GPSUI GPS BO VODPOUSPMMFE
FOWJSPONFOU &OE VTFS NVTU GPMMPX UIF TQFDJGJD PQFSBUJOH JOTUSVDUJPOT GPS TBUJTGZJOH
3' FYQPTVSF DPNQMJBODF 5IJT USBOTNJUUFS NVTU OPU CF DPMPDBUFE PS PQFSBUJOH JO DPOKVODUJPO
XJUI BOZ PUIFS BOUFOOB PS USBOTNJUUFS 5IF NPCJMF EFWJDF JT EFTJHOFE UP NFFU UIF SFRVJSFNFOUT
GPS FYQPTVSF UP SBEJP XBWFT FTUBCMJTIFE CZ UIF 'FEFSBM $PNNVOJDBUJPOT $PNNJTTJPO 64"
5IFTF SFRVJSFNFOUT TFU B 4"3 MJNJU PG  8LH BWFSBHFE PWFS POF HSBN PG UJTTVF
5IF IJHIFTU 4"3 WBMVF SFQPSUFE VOEFS UIJT TUBOEBSE EVSJOH QSPEVDUDFSUJGJDBUJPO GPS VTF
XIFO QSPQFSMZ XPSO PO UIF CPEZ JT  8LH
'PS CPEZ PQFSBUJPO UIJT EFWJDF IBT CFFO UFTUFE BOE NFFUT '$$ 3' FYQPTVSF HVJEFMJOFT
XIFOVTFE XJUIBOZ BDDFTTPSZ UIBU DPOUBJOT OP NFUBM BOE UIBU QPTJUJPOT B NJOJNVN PG NN
GSPN UIF CPEZ 6TF PG PUIFSBDDFTTPSJFT NBZ OPU FOTVSF DPNQMJBODF XJUI '$$ 3' FYQPTVSF
HVJEFMJOFT
• Ensure to turn on the Bluetooth® function of your smartphone or tablet before use.
• Please fully charge your WisePad 2 before use.
• Please ensure that you have chosen the desired “Pairing” method of WisePad 2 before
to start the connection process.
• Please ensure magstripe /EMV chip of the card is facing the right direction when swiping
or inserting card.
• Don’t drop, disassemble, tear, open, crush, bend, deform, puncture, shred, microwave,
incinerate, paint, or insert foregin object into the device. Doing any of which will void the Warranty.
• Don’t immerse the device into water and place near washbasins or any wet locations. Don’t spill
any food or liquid on the device. Don’t attempt to dry the device with external heat sources, such
as microwave or hair dryer.
• Don’t use any corrosive solvent or water to clean the device. Recommend using dry cloth to clean
the surface only.
• Don’t use any sharp tools to point the internal components or connectors, doing which may lead to
malfunction and void the Warranty.
• Don’t try to disassemble the device to repair. Please contact your dealer for repair and maintenance.

Navigation menu