BCS Access Systems US 32T TRW TPMS Transmitter User Manual 32T change paragraph Class2

TRW Inc TRW TPMS Transmitter 32T change paragraph Class2

Contents

user manual

TRW Automotive                                                               September 12, 2008  TRW 24175 Research Dr. Farmington Hills, MI  48335-2642 Tel  248.478.7210 Fax  248.699.4241  Federal Communications Commission    Industry Canada Applications Processing Branch     1241 Clyde Ave. 7435 Oakland Mills Road            Ottawa, Ontario K2C 1Y3 Colombia, MD  21046  Re:  Class II Recertification for TRW TPM Sensors   FCC ID: GQ4-32T   Canada IC: 1470A-13T   The device under test is manufactured by the grantee (TRW) and sold as an OEM product.  Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-user has all applicable / appropriate operating instructions. When end-user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end-user.   TRW will supply the this document to the reseller/distributor dictating what must be included in the end user’s manual for the commercial product.   Information to be included IN the end USER'S MANUAL  The following information must be included in the end product user’s manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user's manual.  ************************************************************************************************ FCC ID: GQ4-32T IC: 1470A-13T  This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:  (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.  WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment.  The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.  ************************************************************************************************

Navigation menu