BEA orporated 10TD9001HH4 Wireless door activation / sequencing device User Manual 75 5858 02 900 MHZ INDUSTRIAL 20160205 indd
BEA Incorporated Wireless door activation / sequencing device 75 5858 02 900 MHZ INDUSTRIAL 20160205 indd
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2904169 |
| Application ID | NkHFG3CyB2h5IWa0NdD8AA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 104.44kB (1305454 bits) |
| Date Submitted | 2016-02-17 00:00:00 |
| Date Available | 2016-04-15 00:00:00 |
| Creation Date | 2016-02-05 09:31:34 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2016-02-05 09:31:38 |
| Document Title | 75.5858.02 900 MHZ INDUSTRIAL 20160205.indd |
| Document Creator | Adobe InDesign CC 2015 (Macintosh) |
Digital transmitters and receiver with frequency hopping, sequencing and extended hold functionality (US version) DESCRIPTION 10 1. 2. 3. 4. 5. receiver (10RD900) antenna wire blue activation LED red learn LED tri-color signal strength LED 6. 7. 8. 9. 10. DIP switches no-delay learn button delay learn button delay learn potentiometer transmitter HAND HELD TRANSMITTERS 1 BUTTON 2 BUTTON 3 BUTTON 4 BUTTON IMPORTANT: This product is NOT intended for use directly with Magnetic Locks or Electric Strikes. Contact BEA Technical Support for further information. 75.5858.02 900 MHZ INDUSTRIAL 20160205 Page 1 of 4 ENGLISH 900 MHZ RECEIVER & INDUSTRIAL TRANSMITTERS PRECAUTIONS qq Shut off all power going to header before attempting any wiring procedures. qq Maintain a clean & safe environment when working in public areas. qq Constantly be aware of pedestrian traffic around the door area. qq Always stop pedestrian traffic through the doorway when performing tests that may result in unexpected reactions by the door. qq ESD (electrostatic discharge): Circuit boards are vulnerable to damage by electrostatic discharge. Before handling any board ensure you dissipate your body’s ESD charge. qq Always check placement of all wiring before powering up to ensure that moving door parts will not catch any wires and cause damage to equipment. qq Ensure compliance with all applicable safety standards (i.e. ANSI A156.10) upon completion of installation. qq DO NOT attempt any internal repair of the components. All repairs and/or component replacements must be performed by BEA, Inc. Unauthorized disassembly or repair: 1. May jeopardize personal safety and may expose one to the risk of electrical shock. 2. May adversely affect the safe and reliable performance of the product resulting in a voided warranty. • The device should not be used for purposes other than its intended use. All other uses cannot be guaranteed by the manufacturer of this device. • The installer of the door system is responsible for carrying out a risk assessment and installing this device and the door system in compliance with applicable national and international regulations and standards on door safety. • The manufacturer of this device cannot be held responsible for incorrect installations or inappropriate adjustments of this device. INSTALLATION Wiring TERMINAL: LABEL: 12-24 V 12-24 V COM NO NC WIRE COLOR: red black white green yellow SIGNAL: + voltage - voltage common normally-open normallyclosed DESCRIPTION: power relay contacts SETUP DIP Switches DIP (PUL only) STATUS FUNCTION PUL Pulse Relay TOG Toggle Relay 0.5s 0.5 second hold time relay remains active for 0.5 seconds after transmitter is... pressed [STD] released [EH] 10s 10 second hold time relay remains active for 10 seconds after transmitter is... pressed [STD] released [EH] STD standard hold relay acts according to DIP 1 and 2 (does not matter if transmitter is pressed/released or pressed/held) EH extended hold relay remains active as long as transmitter is pressed and held once released, relay acts according to DIP 1 and 2 DESCRIPTION pressing transmitter activates and holds relay according to DIP 2 and 3 pressing transmitter once activates and holds relay indefinitely pressing transmitter again deactivates relay immediately (no hold) Hand Held Configuration ON 1 2 3 Set DIP switches as desired. Press and release desired learn button (red LED on receiver will illuminate)1. Press transmitter twice (blue LED on receiver will illuminate). NOTES: 1If Learn w/ Delay button is used, adjust potentiometer (1 s to 30 s). Page 2 of 4 75.5858.02 900 MHZ INDUSTRIAL 20160205 Removing Transmitters Single Transmitter All Transmitters x2 Press BOTH learn buttons until red LED flashes once (~2 s). Press transmiter TWICE within 10 seconds. Press BOTH learn buttons until blue LED illuminates (~10 s). Battery Replacement Handheld (TD900INDHHx) 3V 3V Remove back three (3) screws and disassemble. Replace two (2) 3V (CR2032) batteries observing polarity and reassemble. Low Battery Indicator - After transmitter button is pressed, low battery is indicated by three (3) transmitter LED blinks. NOTE: All transmitters must ONLY be powered with provided batteries or equivalent. SINGAL STRENGTH INDICATION Pressing and hold transmitter button for at least 5 seconds activates singal strength tri-color LED on receiver Green LED on Strong signal Yellow LED on Medium signal Red LED on Weak signal TROUBLESHOOTING red LED on receiver flickering; unable to program weak signal stuck push plate disconnect push plates to determine which is stuck (LED should go out) faulty transmitter if LED does not go out, remove transmitter batteries to determine which is faulty, replace transmitter receiver antenna positioned poorly position antenna outside of door header 75.5858.02 900 MHZ INDUSTRIAL 20160205 Page 3 of 4 PLEASE KEEP FOR FURTHER USE – DESIGNED FOR COLOR PRINTING TECHNICAL SPECIFICATIONS Frequency: 908-918 MHz (frequency hopping) Emitted radio power: -25 dBm (TX) Power consumption: 13 mA (Transmitter) 40mA (Receiver) Supply voltage: 12-24 VAC/DC Contact rating: 1.0 A @ 30 VDC 0.5 A @ 125 VAC 0.3 A @ 60 VDC Temperature range: 14°F to 131°F (-10°C to 55°C) Programmable units per receiver: 74 LEDs: red (receiver learn) blue (relay activation) tri-color (signal strength) Dimensions: 2.5” (W) x 2.0” (D) x 0.75” (H) [RD900] 1.5” (W) x 3.0” (D) x 0.5” (H) [Transmitter] Transmitter Protection Rate IP65 Certification: FCC, IC Specifications are subject to changes without prior notice. All values measured in specific conditions ©BEA|OriginalInstructions|75.5858.02900MHZINDUSTRIAL20160205 FCC / IC “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” Changes or modifications not expressly approved by BEA Incorporated could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Page 4 of 4 FCC ID: 2ABWS-10RD900 IC: 4680A-10RD900 MODEL: 10RD900 FCC ID: IC: MODEL: 10TD900INDHH1 FCC ID: IC: MODEL: 10TD900INDHH2 FCC ID: IC: MODEL: 10TD900INDHH3 FCC ID: IC: MODEL: 10TD900INDHH4 75.5858.02 900 MHZ INDUSTRIAL 20160205
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42 Create Date : 2016:02:05 09:31:34-05:00 Metadata Date : 2016:02:05 09:31:38-05:00 Modify Date : 2016:02:05 09:31:38-05:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Instance ID : uuid:0581bca5-6519-5741-823a-2ba997113b7d Original Document ID : xmp.did:3DC0279A5095E211B5A3E4D6F5E241D6 Document ID : xmp.id:a43192e3-6cf9-49a1-8e3c-b4ca542cadef Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : xmp.iid:c9cff9fd-0deb-4e38-aa6d-792970c3319c Derived From Document ID : xmp.did:cc8a342a-1972-4c96-9b52-fd0cd6de468f Derived From Original Document ID: xmp.did:3DC0279A5095E211B5A3E4D6F5E241D6 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:02:05 09:31:34-05:00 Format : application/pdf Title : 75.5858.02 900 MHZ INDUSTRIAL 20160205.indd Producer : Adobe PDF Library 15.0 Trapped : False GTS PDFX Version : PDF/X-4 Page Count : 4 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools