BEIJING FIMI TECHNOLOGY FXQ02FM Mi Drone User Manual TempConfidential 1

BEIJING FIMI TECHNOLOGY LIMITED Mi Drone TempConfidential 1

Contents

TempConfidential_User Manual-1

Download: BEIJING FIMI TECHNOLOGY FXQ02FM Mi Drone User Manual TempConfidential  1
Mirror Download [FCC.gov]BEIJING FIMI TECHNOLOGY FXQ02FM Mi Drone User Manual TempConfidential  1
Document ID3303268
Application IDtrBAOT+Qh/Nbmkc8Kh5VxQ==
Document DescriptionTempConfidential_User Manual-1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize334.2kB (4177546 bits)
Date Submitted2017-03-02 00:00:00
Date Available2017-08-31 00:00:00
Creation Date2017-02-28 16:26:23
Producing SoftwareFoxit Phantom - Foxit Corporation
Document Lastmod2017-02-28 16:26:23
Document TitleTempConfidential_User Manual-1
Document Author: Test

Mi Drone User Guide
Please read this manual carefully before using
Attention
. This product is only for adults over 18 years old.
. Fly in open area. Keep enough distance from people, animals, trees, vehicles and buildings etc.
. Be away from the circumstances such as airports, railways, high ways, tall buildings and electric wires etc.
. The flying height, distance and zone are limited by relevant laws and regulations set forth by government.
. All operator should compliance with safety precautions during using this product.
Scan & Install Mi Drone App
Products & Accessories
1. Aircraft
Auxillary Positioning Module (Option)
Motor
Undercarriage Lock
Battery Compartment
Light
Undercarriage
Products & Accessories
2. Radio Controller
Button B
Normal Flight/Auto Return Mode Switch
Belt Hole
Button A
Mobile Device Holder
Left Roller
Left Stick
Right Stick
Power Button
Battery Indicator
Auto Take-off/Landing Button
Right Roller
Antenna
Charging Port USB Port(Connect Radio Controller and mobile device)
Products & Accessories
3. Integraded Gimbal Camera
Shock-Absorbing Frame
Rotate Upwards
Connection Indicator
TF Card Port
Camera Lens
Micro-USB Port
Shooting Indicator
Products & Accessories
4. Accessories for Quadcopter
Quick-detachable Propellers
5. Tool Box
USB Cable
Battery
Battery Charger
Wireless Adapter
Charging
2. Charge the Radio Controller
1. Charge the Battery
5V
2A
. The indicator will be blinking during the charging
. The indicator will be turned off when chariging is
completed
Indicator
Power
High
Low
100~240 V
. The indicator will be blinking
during the charging
. The indicator will be turned off
when chariging is completed
Indicator
* Both battery ports could
be used
Low
High
Prepare
1. Prepare the Aircraft
a. Undercarriage
Undercarriage lock
Turn and hold the undercarriage lock to unlock
position;
Pull up the undercarriage.
Turn down the undercarriage till hear clicking sound;
Note:
Before flight, the undercarriage MUST be turned down.
b. Battery
c. Protective Frame
. Push the battery into the battery
compartment till hear clicking sound.
. Please use included screws and
driver to assemble propeller frames.
. Press the battery assemble switch
then can pull out the battery.
. Two screws are needed on every
propeller frame.
Battery Assemble Switch
d. Propellers
Disassemble
Assemble
. Check propeller cap is on unlock position
. Put the propellers on the top of motors with same color marks.
. Press the propeller down onto the motor and rotate the propeller cap
in the lock direction untill it is secured.
. Rotate the propeller cap in the unlock direction untill the propeller jump
up, then propeller can be removed.
10
Color Mark
Prepare the Gimbal Camera
Insert TF Card
Turn and keep the gimbal
switch to unlock position,
remove the gimbal cover.
TF Card Port
USB Port
Insert gimbal camera into
the cavity with 45° tilt degree,
press gimbal camera down
firmly till hear click sound.
Upwards rotate 90°
. Please choose mainstream band TF cards,
Class 10 and 16G at least.
11
Prepare the Radio Controller
Clip
Unfold the antennas as shown figure.
Pull out moble device holder untill the clip pop up.
Note:
Please keep the vertical surface of antennas toward
aircraft to get the more stable singnal level.
12
. Place the mobile device on the holder, please beware of the
mobile device's power key not be touched.
. Open the cover on the bottom of radio controller
. Connect the radio controller with mobile device by USB cable
or wireless adaptor
. Refer to Mi Drone APP instruction to complete connection.
Note:
Due to size limitation, Some mobile device MAY NOT be placed on the holder.
13
Choose USB cable to connect the
radio controller and mobile device
1 . Open Mi Drone APP, select “ Next” button
1 . Open Mi Drone APP, select “ Next” button
2 . Pop up dialog box, select “USB connection”, tap
“ OK” button
2 . Pop up dialog box, select “USB connection”, tap
“ OK” button
14

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 14
Has XFA                         : No
Producer                        : Foxit Phantom - Foxit Corporation
Author                          : Test
Create Date                     : 2017:02:28 16:26:23
Modify Date                     : 2017:02:28 16:26:23
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AG53FXQ02FM

Navigation menu