BEIJING FIMI TECHNOLOGY FXQ02FM Mi Drone User Manual TempConfidential 2
BEIJING FIMI TECHNOLOGY LIMITED Mi Drone TempConfidential 2
Contents
- 1. TempConfidential_User Manual-1
- 2. TempConfidential_User Manual-2
TempConfidential_User Manual-2
15
Choose Wireless Adaptor to connect
the radio controller and mobile device
1 . Open Mi Drone APP, select “ Next” button.
2 . Select “Wi-Fi connection” on the dialog box,
tap “ OK” button.
.
1 . Connect “MiRC_XXXXXX” device, the default key
is “ 123456789”.
2 . Back to Mi Drone APP, APP will complete connection
and go to MAP page automatically.
16
Operation Guide
1. Running Mi Drone APP
2. Aircraft Direction
3. Power on the aircraft and the radio
controller
Please ensure Mi Drone APP is running and mobile
device, radio controller and aircraft are correct
connection, then motor can start to work
The same method to power on/off the aircraft and the radio
controller.
.
.
Front Direction
Green LightRed Light
White Light White Light
Battery is at the aircraft tail direction, gimbal camera is
at the aircraft head direction.
When the aircarft is turned on, White color light indicate
the head direction, red color light and green color light
indicate the tail direction.
Note: During the flight, end-user should try to keep facing the tail direction
always.
.Press once to check the battery level
.Press once, then again and hold to turn on/off
17
Sticks setting can be changed in the Mi Drone APP
Left Stick
Up
Anti-Clockwise
Rotation Clockwise
Rotation
Turn
Left
Turn right
Right Stick
Forward
Down Backward
Operation Guide
4. Radio Controller Sticks
Up
Forward
Head Direction
Clockwise Rotation
Turn L eft
Backward
Down
Anti-Clockwise Rotation
Note:
The orienations shown as above figure are base on the head direction.
Turn Right
18
Operation Guide
5. Take-off and Landing
Push left stick upward slowly and steadily
Left Stick Right Stick
Pull
Slowly
Pull and keep 2 sticks
into shape V
Release 2 sticks when
motors start rotatingLeft stick down slowly untill aircraft touch the
ground.
Hold left stick down at max level a few seconds
untill motors stop rotating.
Left stick up slowly to
take off.
Note:
Before taking off, please ensure both key lights on the
radio controller is white color.
Note:
Once need to stop motors rotation emergency,
please press and hold 2 keys a few seconds
untill motors stop rotating.
19
Operation Guide
6.Gimbal Camera Power Up
7.Gimbal Camera Tilt Angle Control
8.Take picture and vedio
Gimbal camera will start self-test and go into steady
mode when aircraft is turned on.
Use the left roller on the radio controller to control
gimbal camera tilt angle.
The controllable angle range is 0° ~ 90°.
Picture Button
Vedio Button
here are 2 beeps when press picture button to take
one picture.
There are 2 beeps when press vedio button to start
vedio recording, and 4 beeps when press vedio button
again to stop vedio recording.
During vedio recording, the power key on the radio
controller will show notify light.
20
Operation Guide
9. Radio controller quick lanuch button
Set the aircraft to the home mode. The aircraft
will return to the last recorded Home Point and
landing automatically.
.
The auto return to home function can be
interrupted when set the aircraft to the normal
flight mode.
.
The right roller on the radio controller can adjust
the aircraft white light brightness. ( The fucntion
redefinition can be set by Mi Drone APP. )
.
Press once, then again and hold a few seconds
to make the aircraft take off automatically.
.
Press once, then again and hold a few seconds
to make the aircraft landing automatically.
.
Note:
Only when key light is white color, The Auto Takeoff and Auto
Landing fucntion can be effective.
21
Maintenance and Calibration
1 .Propellers
2.Propeller frames (Option)
6.Matching Operation
Propeller is liable to be damaged. please replace it with
new one immediately once any damage happened.
Damaged proellers will seriously affect flight performance.
When the aircraft or the radio controller were replaced, the
matching operation is needed between the aircraft and the
radio controller.
1.Power up the aircraft
2.Power up the radio controller and waiting 15 seconds.
Then press and hold the radio controller power key untill
the radio controller is beeping.
3.Remove the gimbal cover on the aircraft. Press matching
key 1 second and release it.
4.When the power key light on the radio controller change
to the white color, the matching operation is sucessful.
Propeller frame is liable to be damaged. please replace it
with new one once any damage happened.
5.Compass Calibration
In order to ensure flight safety. Mi Drone APP will notify
and instruct the aircraft to do compass calibration when
magnetic field environment is changed.
3.Battery
4.Aircraft Self Diagnostic Test
To avoid fire, serious injury, and property damage. Use of
battery in low tempreture can reduce battery capacity
seriously. DO NOT use the battery below -5°.
The aircraft will run self diagnostic test at each time power
up. Mi Drone APP will show error message once failure
happen.
22
Maintenance and Calibration
7. Wireless Adaptor 8.Sticks calibration
1. Some model mobile devcie will show “No Internet
assess” when wireless adaptor connected with the
radio controller, please select “leave you on the same
network”.
2. To avoid any mismatching when several radio
controller and several wireless adaptor to run pairing
at the same time in one place, recommend that end
user to change the wireless adaptor's SSID and Key
3. Once wireless adaptor's SSID or Key are changed,
End user need to set KEY again when the first time
pairing
4. The wireless adaptor and the radio controller are
paired using. Wireless adaptor's SSID and Key will
back to default value when the radio controller is
changed to a new one.
Sticks need to do calibration if the radion controller is
beeping when power up.
Please follow Mi Drone APP instuction to do sticks
calibration.
Note: Please ensure the aircraft is power off before
sticks calibration.
23
Indicator Description
1. Aircraft Indicator Description 3. Radio Controller Indicator Description
2. Gimbal Camera Indicator Description
Slow White,
green and red light flashing Self diagnostic test
Indicator Status
Self diagnostic test is passed,
aircraft is at ready status
3
Solid White,
green and red light
Solid white light
Slow red and green light flashing
White,
green and red light flashing
Fast white,
green and red light flashing
Self diagnostic test is failed
Note: Mi Drone APP will report error message
Low battery warning
Critical low battery warning
Solid white light Image transmission connection is ready.
Status
1
2
3
4
5
Slow white light flashing Image transmission connection is not ready.
Solid red light Camera is ready
Slow red light flashing Vedio recording
White and red light flashing Firmware upgrading.
Indicator
Solid Power Key red light The connection between the aircraft and the
radio controller is not ready
1
2
3
4
5
6
Indicator Status
Solid Power Key white light
Power Key red light flashing
Power Key white light flashing
Solid Auto Takeoff/Land key red light
Solid Auto Takeoff/Land key white light
The connection beteen the aircraft and the
radio controller is ready
In matching mode
Firmware upgrading
Auto take off and landing function is disable
Auto take off and landing function is enable
24
Specifications
Accessories
Aircraft
Model: WRJTZ02FM
Size: 310 x 380 x 190mm
Diagonal Size: 434mm
Weight: 0.75Kg(w/o battery)
Wireless adapter
Model: WRJDG01FM
Size: 45 x 18 x 8.4mm
Weight: 5.10g
operation frequency: 2.4G
Wireless:
Battery
Type: Rechargeable Li-ion Polymer Battery
Capacity: 5100mAh/15.2V(77.52Wh)
Charger
Input: 100-240V~ 50/60Hz 1.5A
Output: 16V 2.9A
Camera
Weight: 0.18Kg
Aperture: f/2.8
Focus: (35mm format equivalent: 20mm)
Max Vedio recording Mode: 3840 x 2160p/30fps
Max Image Size: 4072 x 3044
Max Bitrate Of Vedio: 65Mbps
Radio Controller
Weight: 0.47Kg
Frequency Band: 5GHz
Battery Type: Li-ion Battery
Battery Capacity: 5000mAh/3.7V(18.5Wh)
Charging input: 5V 2A
Working Temperature: 0-40
Working Altiture: 不大于5000m
2
2
2
25
Regulatory Notice for Users in EU
Hereby, Fimi declares that the wireless
equipment is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
WEEE Disposal and Recycling Information
Federal Communications Commission Declaration of Conformity
26
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Fimi is not responsible for any radio or television interference caused by using other than specified or
recommended cables and connectors or by unauthorized changes or modifications to this equipment.
Unauthorized changes or modifications could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Responsible Party:
Regulatory Notice for Users in USA
27
USA — Federal Communications Commission (FCC)
This device are granted with following FCC ID by Federal Communications Commission (FCC)
FCC ID：2AG53FXQ02FM
Name：Mi Drone Model：FXQ02FM
FCC ID: 2AG53YKQ02FM Name：Radio Controller Model：YKQ02FM
FCC ID: 2AG53WRJDG01FM Name：Wireless Adapter Model：WRJDG01FM
RF exposure warning
antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm
from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provide with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
SA R Statement(only apply to FCC ID: 2AG 53YKQ02 FM IC: 21 054-YKQ02FM
IC: 21 054-WRJDG01FM
Name：Rad io Controller
Model：YKQ02FM FCC ID: 2AG53WRJDG01FM Name：Wireless Adapter
)
SA R Dé clarat ion
This equipment comp lies with FCC &ISED SA R limits ,the highest SAR value re ported to t he FCC and
ISED for t his device is YKQ02FM: 1.08W / KG; WRJDG01FM:0.463W / KG.
Cet équipement est confor me aux limites FCC &ISED SA R, la valeur SA R la plus élevée rap portée à la
FCC et ISED pour cet appare il est YKQ02FM: 1.08W / KG; WRJDG01FM:0.463W / KG.
Model：WRJDG01FM
Regulatory Notice for Users in Canada
This device are granted with following IC ID by Industry Canada (IC )
Name：Model：WRJDG01FMWRJDG01FM
Name：Mi Drone Model：FXQ02FM
Name：Radio Controller Model：YKQ02FM
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
28
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Industry Canada Class B Emission Compliance Statement
Wireless adapter
29
IC RF Exposure statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement
non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la
source de rayonnement et votre corps.
i. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall
be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as
appropriate; and
i. pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis (pour les dispositifs utilisant la bande
de 5 725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée pour l'exploitation point à point et l'exploitation non
point à point, selon le cas;