BEST Drilling/Installation Instructions For 45H And 47H Mortise Locks T81163 Drilling
User Manual: BEST Drilling/Installation Instructions for 45H and 47H Mortise Locks Installation
Open the PDF directly: View PDF 
.
Page Count: 2
N
N
O
3/4"
19.1 mm
3/32"
2.4 mm
4-7/8" (124 mm)
3-3/8" (85.7 mm)
4-1/8" (104.8 mm)
1-1/16" (27 mm)
Ø 5/32"
4 mm
L
Place the template on the exterior edge of door and mark horizontal line for door edge
template based on hole H. Suggested height from bottom of the door to hole H is 39-9/16"
(1005 mm). Mark centerline of lockset on the door face and continued onto door edge.
Center punch
holes
according to
Model Chart.
Align template
with the lever
centerline and
centerpunch
corners of box L.
Tools Needed
5/32"
4 mm
5/8"
16 mm
#12-24 Tap Bit
3/4"
19.1 mm
Chisel
1-1/4"
32 mm
Chisel
3/8"
9.5 mm
#8-32 Tap Bit
Ø1-3/8"
35 mm
Hole Saw
4-1/4"
(108 mm)
deep
Connect previous
marks.
45H/47H Drilling Instructions/Template
Spanish and French translations are available on www.bestaccess.com
Traducciones al español y francés están disponibles en www.bestaccess.com
Des traductions en espagnol et en français sont disponibles sur www.bestaccess.com
1-1/16"
27 mm
Auger Bit
1"
25 mm
Auger Bit
1"
25 mm
Spade Bit
1/8"
3.2 mm
Drill Bit
Auger Bit
Trace Lockset face.
B
F
D
J J
K
L
M
K
E
G
G
E
C
H
A
Align to High Edge (wide side)
Align to Low Edge (narrow side)
1-1/8" (28.6 mm)
Lock
Lock
1-1/4" (31.8 mm)
1-1/4"
31.8 mm
1-3/4"
44.5 mm
5/8"
15.9 mm
1/2"
12.7 mm
7/8"
22.2 mm
1-49/64" (44.8 mm)
6-59/64" (178.9 mm)
4-7/8" (123.8 mm)
3/8"
9.5 mm
3/8"
9.5 mm
Lever
Lock
Lever
5/8"
15.9 mm
1"
25 mm
Strike Strike Strike
A
1-1/4" (31.8 mm)
1-1/8" (28.6 mm)
ENSURE
SQUARE IS
1"(25.4mm)
AFTER PRINT.
T81163-B Copyright© 2014 Stanley Security, Inc.
1/2
Holes
Functions
A, D R, RHB,
B5, DEL, DEU
AB, AT, B, BA,
BW, HJ, T, TA,
TD, TDEL,
TDEU
AD
C, CHB, G,
IND, INL, S,
W, B7, TWEL,
TWEU, WEL,
WEU
HL, LB, LT, LEL,
LEU
N, NX, NXEL,
NXEU RD, WD YD 1DT, 2DT
IN EX IN EX IN EX IN EX IN EX IN EX IN EX IN EX IN EX IN EX
A*M & N forged trim (2) Through Door Through Door Through Door Through Door Through Door Through Door Through Door Through Door Through Door †Through Door
B*J trim (1) Through Door Through Door Through Door Through Door Through Door Through Door †Through Door
C‡Cylinder (1) • • • • • • • • •
DHigh security cylinder (1) • • • • • • • • •
E*H, R, & S trim thumb turn (2) • • • •
FEmergency key/thumb turn access (1) • • • • • •
G††Trim mounting (2) •••• •••••••• †••
H††Lever (1) •••• ••••••••
J*H & R trim visual indicator (2) •
J&K Visual Indicator Thumb Turn • • • •
* † ‡ †† See Notes on second page.
1
2
5
3
6 7
4
T81163-B Copyright© 2014 Stanley Security, Inc.
2/2
Connect
previous marks.
Place strike template
centerline on lever
centerline made on the
previous step.
Centerpunch edges of
strike and box, O.
Locate center of strike
hole by measuring back
from door stop, 1/2 the
thickness of door.
3/4"
19 mm
deep
5/32"
4 mm
1-1/4"
32 mm
Chisel
1/4"
6.4 mm
deep
3/32" (2.4 mm)
deep
5/32" (4 mm)
deep w/ dust box
Mark holes
Continue the lockset centerline
(located on template) onto the
door frame.
1"
25 mm
1-1/8"
(29 mm)
deep
1-1/4"
32 mm
Chisel
3/4" (19 mm)
deep
Metal Doors:
#12-24 Tap
Metal Doors:
#12-24 Tap
5/32"
4 mm
Mark holes
N
N
O
3/4"
19.1 mm
3/32"
2.4 mm
4-7/8" (124 mm)
3-3/8" (85.7 mm)
4-1/8" (104.8 mm)
1-1/16" (27 mm)
Ø 5/32"
4 mm
B
F
D
JJ
K
L
M
K
E
G
G
E
C
H
A
Align to High Edge (wide side)
Align to Low Edge (narrow side)
1-1/8" (28.6 mm)
Lock Lock
1-1/4" (31.8 mm)
1-1/4"
31.8 mm
1-3/4"
44.5 mm
5/8"
15.9 mm
1/2"
12.7 mm
7/8"
22.2 mm
1-49/64" (44.8 mm)
6-59/64" (178.9 mm)
4-7/8" (123.8 mm)
3/8"
9.5 mm
3/8"
9.5 mm
Lever
Lock
Lever
5/8"
15.9 mm
StrikeStrikeStrike
A
1-1/8" (28.6 mm)
1-1/4" (31.8 mm)
Drill holes selected from Model
Chart based on your function.
* For trim outside only functions (such as ZD and ZR) and trim inside only functions (such as XD and XR), prepare surface mount trim holes on the trim side of the door as needed.
† For 1DT, drill 7/64 in. (11 mm) holes halfway into the door at the centerpoints indicated.
‡ To qualify for the UL 437 high security listing, use the M escutcheon and the 1E7J4 cylinder. The1E7K4 cylinder is available for use with either M trim or sectional trim, but does not qualify for the UL 437 high security listing. This option is not
available for H and HJ function locks.
†† Because these holes pass through the mortise pocket, it is recommended that each hole be drilled separately rather than straight through.
ENSURE
SQUARE IS
1"(25.4mm)
AFTER PRINT.
8
11
14
17 18 19 20
15 16
9
12
10
13
