BIG KING HORN SPEAKER ENT 4412 TRANSMITTER User Manual

BIG KING HORN SPEAKER ENT. CO., LTD. TRANSMITTER

User manual

Arming: Press & Release the “Lock” buttonSilent Arming: Press & Release the “3rd” button Twice in 3 sec.Disarming: Press & Release the “Unlock” buttonSilent Disarming: Press & Release the “3rd” button Twice in 3 secPage 1Remote Control Quick Reference Guide THE SIREN WILLCHIRP ONCE THE PARKING LIGHTSWILL FLASH ONCETHE DOORS WILL LOCK(IF CONNECTED) THE PARKING LIGHTSWILL FLASH ONCETHE DOORS WILL LOCK(IF CONNECTED)2 XTHE SIREN WILLCHIRP TWICETHE PARKING LIGHTSWILL FLASH TWICETHE PARKING LIGHTSWILL FLASH TWICETHE DOORS WILL UNLOCK(IF CONNECTED)2 XTHE DOORS WILL UNLOCK(IF CONNECTED)Table Of ContentsOwner’s GuideArming the System ......................... 3Disarming the System .................. 4Emergency Override ....................... 4System Armed & Activated ............ 5Panic ................................................. 5Sensor By-Pass .............................. 5Auxiliary Channel ............................ 6Remote Controlled Anti-Carjack .. 6Anti-Carjacking (Door & Ignition).. 7Valet Mode ........................................ 8LED Status Indicator ...................... 8Auxiliary Sensor & Prewarn ........... 9 Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no changeto the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user's authority to operate the device.
Emergency Override:Panic:Press & Hold the “Lock” Button for 3 Sec’s, with the ignition “Off”Shock Sensor & Prewarn Bypass:1) Arm the alarm by, Pressing & Releasing the “Lock” button2) Within 2 seconds Press & Release the “3rd” button.To Activate the Auxiliary Channel: Press & Hold The “3rd” Button for 3-SecondsTo Activate Remote Anti-Carjack: (programmable Dip-Switch # 7)Press & Hold the “4th” button, for 3 Secs, with the ignition “On”Page 2 Hold 3 secondsOpen Electric TrunkOperate Window Roll-Up UnitOperate Remote Start Unit THEN WITHIN 10 SECONDS PRESS & RELEASEVALET BUTTONTHE SIREN WILL SOUND THE PARKING LIGHTSWILL FLASH Hold 3 secondsThen 2.1. Hold 3 seconds
The system may be "Armed" by any of 3 methods:1) Remote Control Arming: Press & Release the “Lock” buttonPage 3Arming the Alarm2) SILENT Remote Control Arming: Press & Release the “3rd” button Twice within 3 secondsUpon Arming:• The siren will chirp one time.• The parking lights will flash once.• The doors will lock. (If an optional interface is connected)• The starter interrupt will engage.• The LED Status Indicator will begin to flash slowly.- If a zone is open, (for example a car door), when arming, the alarm will still arm,but will bypass the open zone until the zone is secured.3) To Passively Arm: Turn Ignition “Off”, Then Close all Doors.Automatic “Last Door Arming” is a programmable feature which allows the alarmto arm itself and lock the doors, (if vehicle’s door locks are connected).If on, anytime the ignition is turned off, and then a door is opened and closed:• The Siren will chirp once to confirm arming countdown has begun.• The LED Status Indicator will begin to flash rapidly.Thirty seconds later:• The siren will chirp & the lights will flash once.• The LED Status Indicator will begin to flash slowly.• The starter interrupt will engage.- The alarm is now fully armed. The doors will lock at this time, if the vehicle isequipped.- The system can not Last Door Arm if a protected zone is open. Should a ve-hicle door be opened during the arming countdown, the countdown will stop andstart over again when the door is closed. AUTO REARM (programmable) allowsthe Alarm to Rearm itself, if it is Disarmed and a vehicle door is not opened. THE SIREN WILLCHIRP ONCE THE PARKING LIGHTSWILL FLASH ONCETHE DOORS WILL LOCK(IF CONNECTED) THE PARKING LIGHTSWILL FLASH ONCETHE DOORS WILL LOCK(IF CONNECTED)2 X
The system may be "Disarmed" by any of 3 methods:1) Remote Control Disarming: Press & Release the “Unlock” button2) SILENT Remote Control Disarming: Press & Release the “3rd” button Twice within 3 secUpon Disarm:• The siren will chirp twice. (4 chirps if alarm has activated & reset)• The parking lights will flash twice.• The doors will unlock. (If an optional interface is connected)• The starter interrupt will disengage.• The LED Status Indicator begins flashing rapidly for Automatic Rearming, until alarm Rearms or a vehicle door is opened.2-STAGE DISARM: If Disarming the alarm while it is triggered (siren sounding), thefirst press of any remote control button will only silence the siren/horn. A secondpress of the “Unlock” button will Disarm the alarm. Step 1: With the system in the armed condition, enter the vehicle via the driver'sdoor (be aware that the alarm will trigger when the door is opened). Step 2: Using your key, turn the vehicle’s ignition to the "On" position. Step 3: Within 10 seconds, Press & Release the Valet/ Override Switch.Page 4Disarming the AlarmEmergency Override THE SIREN WILLCHIRP TWICE THE PARKING LIGHTSWILL FLASH TWICETHE DOORS WILL UNLOCK(IF CONNECTED) THE PARKING LIGHTSWILL FLASH TWICETHE DOORS WILL UNLOCK(IF CONNECTED)2 X THEN WITHIN 10 SECONDS
Regardless of method used to Arm the alarm, once Armed, the alarm will monitorall protected zones, and if an intrusion attempt is detected it will activate, or“trigger”.A trigger consists of the following:• The electronic siren, or optionally the vehicle’s horn, will start sounding.• The exterior parking lights will flash on and off repeatedly.An activation has a 30 second duration unless the system is disarmed using theremote control or the Valet /Override switch. If all protected zones are secure atthe end of the trigger, the system will stop and rearm itself to detect further entryattempts. If a protected zone is still open at the end of the trigger cycle, the alarmwill continue to re-trigger itself for up to six activated cycles before it resets itselfand ignores the violated zone.Should it be needed in a threatening situation, or you feel the need to attractattention, the alarm can be triggered using the remote control. Your alarm fea-tures “Panic Mode”, which allows you to activate “Panic” from the “Arm/Lock”button.To Activate Remote Panic:Press & Hold the “Arm/Lock” Button,for 3 seconds, with the ignition “Off”.The shock sensor & Prewarn zone can be by-passed using the remotecontrol. This may be useful in stormy weather.1) Arm the alarm by, Pressing & Releasing the “Lock” button.2) Within 2 seconds, Press & Release the “3rd” button.- The siren will chirp once to confirm sensor has been by-passed.- Upon Disarming the alarm, the sensor zone will reset.Sensor By-passSystem Armed & ActivatedRemote Panic OperationPage 5THE SIREN WILL SOUNDTHE PARKING LIGHTSWILL FLASH Hold 3 secondsThen1. 2.
The Auxiliary Channel may be used to operate an optional function. Possibili-ties include remote trunk release, remote car starting, or an on-demand re-mote window roll-up interface. Please see your Omega dealer for details onavailable options.To Activate the Auxiliary Channel:Press & Hold the “3rd” Button for 3 Seconds.- The alarm will Disarm upon activating the Auxiliary channel.- The Auxiliary Channel cannot be activated if the vehicle's ignition is "On".The Anti-Carjacking mode can be activated using the remote control.- Refer to next page for sequence details. (Programmable Dip-Switch #7)To Activate Remote Anti-Carjack:Press & Hold The “4th” Button, For 3 Seconds, With The Ignition “On”.Page 6The Auxiliary Channel Hold 3 secondsOpen Electric TrunkOpperate Window Roll-Up UnitOpperate Remote Start UnitRemote Anti-Carjack Hold 3seconds
Page 7The Anti-Carjacking sequence may be activated by any of 3 methods:1) Using the remote control, by holding down the Small “4th” Button for 3 seconds while the ignition is “On”. ( Dip-switch # 7)2) When a door is Opened while the ignition is “On” ( Dip-switch # 7)3) Every time the ignition is turned “On”. (Dip-switch # 6)1) Anti-Carjacking activated using the transmitter: (Dip-Switch #7)The Anti Car-Jacking operation may be activated by pressing and holding theremote control’s Small “4th” button for 3 seconds while the ignition is “On”.2) Anti-Carjacking activated by an Open door: (Dip-Switch #7)If Dip-switch #7 is set to “On”, the system will initiate the Anti-Carjackingsequence every time a vehicle door is opened while the ignition is “On”.3) Anti-Carjacking activated by the ignition: (Dip-Switch #6)If Dip-switch #6 is set to “On”, the system will initiate the Anti-Carjackingsequence every time the vehicle’s ignition is turned “On”.Once the Anti-Carjacking sequence has begun, the user has 59 seconds topress the Valet/Override Switch in order to cancel the sequence.ORDER OF ANTI-CARJACKING SEQUENCE:- For first 20 seconds after the sequence has begun there are no signs.- From 21-30 seconds, the LED will blink slowly.- From 31-45 seconds, the LED will blink fast and the siren/horn will chirp once every 2 seconds.- From 46-60 seconds, the LED will blink fast and the siren/horn will chirp once per second.- If not cancelled yet, at 61 seconds the alarm will trigger.In the triggered condition:- The siren/horn will sound & The parking lights will flash.- After 10 seconds, the starter interrupt will engage.NOTE: Once the Anti-Carjack mode is triggered, the remote control will NOTstop the operation, nor will the system reset automatically. Once it is trig-gered, the Anti-Carjacking operation can only be deactivated by:1) Turning the vehicle’s ignition “Off”.2) Turning the vehicle’s ignition back “On”.3) Within 10 seconds, Press & Release the Valet button.Programmable Anti-Carjacking Protection
Page 8Valet ModeValet Mode can only be entered into while the alarm is Disarmed.Valet Mode turns off all of the alarm’s security features, (including Anti-Carjack).Valet Mode is designed for situations in which it is not convenient for the securityportion of the alarm to be operational; for example during extended stopovers forvehicle servicing, loaning others your vehicle, maintenance, valet parking,washing, etc. The convenience features such as keyless entry will still operate.To Enter Valet Mode (Alarm MUST be Disarmed):Press & Hold the Valet Switch for 3 Seconds.- The LED Status Indicator will light solid Blue and the siren will emit a long chirp to confirm entry into Valet Mode. Now the system cannot become Armed.- The vehicle's ignition may be "On" or "Off" when entering Valet Mode.- To remind you its in Valet Mode ,The siren will chirp every time the vehicle’s ignition is turned “Off”To Exit Valet Mode:Simply Press & Release the Valet Switch.- The LED will turn off and the siren will emit a long chirp to confirm that the system has exited Valet Mode. Normal arming operations may be resumed.- The vehicle's ignition may be "On" or "Off" when exiting Valet Mode.The Blue LED Status Indicator visually shows the status of the alarm and alsoprovides a high level of visual deterrence. The Blue LED Status Indicator Light isnormally mounted where it can be seen by the driver, as well as from outside.Security System Status: The primary function of the Blue LED Status IndicatorLight is to indicate the normal operating status of the security system: Off = The system is disarmed and not performing any automatic functions. On Constant = The system is in the Valet Mode. Flashing Slow = The system is fully Armed. Flashing Fast (while Disarmed) = Last Door Arming or Automatic Rearming. Zone Violation: Once the alarm is Disarmed, the LED will show which zonetriggered the alarm, until the ignition is turned “On” (this clears unit’s memory).3 flash & pause = Door zone triggered alarm.4 flash & pause = Sensor zone triggered alarm.Automatic Transmitter Verification: For the first 10 seconds after the vehicle’signition is turned "On", the LED Status Indicator will flash a number of times equalto the number of remote control transmitters which are programmed to operate thealarm. This indication can be from 1 Flash /pause up to 4 Flashes /pause, as thesystem can be operated by just one, or as many as 4 remote transmitters.The LED Status Indicator
Page 9Auxiliary Sensor: This security system is equipped with an On-Board dual zoneshock sensor that can be turned On/Off via programmable Dip-Switch #1, as wellas a plug-in port for an optional sensor to increase the effectiveness of the system.The comprehensive line of optional sensors offered is comprised of impactsensors, glass tampering sensors, and microwave/radar sensors which candetect motion inside and outside the vehicle.Prewarning Detection: This circuit requires connection to a dual zone sensoror detection device. When the sensor’s prewarn zone is triggered the siren willemit a series of chirps.To program remote controls to operate the alarm:Step 1: Turn "On" the vehicle's ignition.Step 2: Within 7 seconds press the Valet/Override Switch 5 times. The alarmwill wolf the siren once to confirm entry into Remote Control Programming Mode.Step 3: Within 10 seconds, press any Button on each remote to be programmed.The siren will chirp to confirm each time a remote has been programed.If 10 seconds expire without any programming activity, or if the vehicle’s ignitionis turned “Off”, the system will automatically exit Remote Control ProgrammingMode. The siren will emit 2 long chirps to confirm exit.NOTE: Up to 4 remote controls can be programed to operate the alarm. When-ever a remote control, new or existing, is programmed to the alarm, all existingcodes are erased for security. So all remote controls which are to operate thealarm, must be programmed in at the same time.ATV: The LED Status Indicator will show the number of programmed remotecontrol transmitters for 10 seconds after the vehicle’s ignition is turned On. As the instructions above show, programming extra transmitters to any vehiclesecurity system is easy; the exclusive patented ATV feature protects againstsomeone programming their own transmitter to operate your system.Auxiliary Sensor & PrewarningHow to Program Remote Controls to the AlarmATV (Automatic Transmitter Verification)
The alarm has 8 programmable features which allow it to be customized byselecting the position of “Dip Switches” to suite many individual needs. Thefollowing pages provide a brief explanation for each feature, and notes its factorydefault setting.Picture of Dip SwitchesTo Program Features:Step 1) Power down the alarm.Step 2) Change the position of the Dip-Switches to desired settings.Step 3) Power up the alarm.• = Default Factory SettingDIP SWITCH # 1: Internal Dual-Zone Shock Sensor- Allows the user to turn the Internal Shock Sensor On/Off. •Dip switch “On” = Sensor “On” Dip switch Off = Sensor “Off”DIP SWITCH # 2: Double Pulse Unlock:- Sets the alarm to give 2 unlock pulses upon Disarm, for vehicles that require it. Dip switch “On” = Double Unlock Pulses •Dip switch Off = Single Unlock PulsePage 10Programmable FeaturesHow to Program Features
Page 11• = Default Factory SettingDIP SWITCH # 3: Last Door Arming & Locking:- Configures the alarm to automatically arm itself & lock the vehicle doors (ifvehicle is properly equipped), 30 seconds after the last door is closed with thevehicle’s ignition “Off”. •Dip switch “On” = Last door arming “On” Dip switch Off = Last door arming “Off”DIP SWITCH # 4: Auto-Rearm:- Allows the Alarm to Rearm itself, if it is Disarmed and a vehicle door is notopened. The Rearm countdown is cancelled if a vehicle door is opened. •Dip switch “On” = Auto-rearm “On” Dip switch Off = Auto-rearm “Off”DIP SWITCH # 5: Siren & Horn or Horn Only:- This feature configures the alarm’s Brown/White Horn-Honk output wire.This wire can be configured to honk the horn in addition to the Brown wireoperating the siren, or take over all of the Siren’s functions SO THAT NOSIREN IS NECESSARY.- If Siren & Horn are selected: The horn will honk, in addition to siren sounding,only when the door zone is violated. (The horn will not honk if the alarm is triggeredby the sensor zone, or during confirmation “chirps”)- If Only Horn is selected: The car horn will replace the siren and perform all ofits functions. NOTE: The Brown Siren wire will still be fully active & operational. •Dip switch “On” = Siren/Horn Dip switch Off = Horn OnlyDIP SWITCH # 6: Ignition Activated Anti-Carjacking: - This feature turns the alarm’s Ignition Anti-Carjacking feature “On” or “Off”. Dip switch “On” = Ignition Hijack On •Dip switch Off = Ignition Hijack OffDIP SWITCH # 7: Remote Control & Open Door Activated Anti-Carjacking:- This feature turns both the alarm’s Remote Control and Open Door activatedAnti-Carjacking features “On” or “Off”. Dip switch “On” = Hijack On •Dip switch Off = Hijack Off
Page 12• = Default Factory SettingDIP SWITCH # 8: Ignition Door Lock/Unlock:- Configures the alarm to Lock the vehicle's doors when the ignition is turned “On” and Unlock the vehicle’s doors when the ignition is turned “Off”. •Dip switch “On” = Ignition door lock/unlock is “On” Dip switch Off = Ignition door lock/unlock is “Off”
Page 13Brown/White :This wire can be configured (Programmable feature # 6), to honk the hornin addition to the Brown wire operating the siren, or take over all of the Siren’s functions SO THAT NO SIREN IS NECESSARYCafé/con lista Blanca:Este cable se puede programar (función #6), a sonar el claxon en conjunto al cable Café operar la Sirena, O TOMAR TODAS LA FUNCIONES DE LASIRENA PARAQUE NO HAGA FALTA INSTALAR SIRENA.Brown/White - Café/Blanco = (-Horn Output, Salida claxon -)Red/White - Rojo/Blanco = (Light Flash Input)Grey - Gris = (-Auxiliary output, Segundo canal auxiliar-)Orange - Naranja = (-Starter Kill, Corte -)Blue - Azul = (-Trigger Input, Disparo -)Violet - Violeta = (+Door Input, Puerta +)Green - Verde = (-Door Input, Puerta -)Yellow - Amarillo = (+Accessory, Ignición +)Brown - Café = (+Siren/Horn, +Sirena/Claxon)Red - Rojo = (+12 Volts, +12 Voltios)White - Blanco = (+Flashing Lights, +Luces)Black - Negro = (-Ground, -Tierra)Green - Verde = (-Lock, -Cierre)Blue - Azul = (- Unlock, - Apertura)Siren Pin-Switch (-) Pin-Switch (-)Battery Pin-Switch (+)15 Amp+ Parking Lights / LucesRelayTrunkReleaseRelay Car Horn /ClaxonValet SwitchStatus LightLightInput(+) or (-)Key sideof starterwireCar sideof starterwireStarterInterruptRed(Rojo)White(Blanco)• Internal Shock Sensor Adjust• Ajuste de Sensor Interno• Optional Sensor• Sensor Opcional• Programmable Dip-Switch (1-8)LED • Main Wire Harness• Conector CentralValet150
Page 14Door Locking Systems / Sistemas De CierreNegative Trigger System / Sistema Negativo:Doorlock SwitchGroundVehicle's DoorlockRelay Control UnitLockUnlock Lock wire /Cable de cierreUnlock wire/ Cable de Apertura+DoorlockActuators5 Wire Reversal (Rest at ground): Cambio de Polaridad:Positive Trigger System / Sistema Positivo:Doorlock Switch(+) 12 VoltsVehicle's DoorlockRelay Control UnitLockUnlock Lock wire /Cable de cierreUnlock wire/ Cable de Apertura+DoorlockActuators(+)12 VoltsUnlock UnlockPassengerDoorlock SwitchDriverDoorlockSwitch - Lock wire "Switch" side. -cable de Cierre, lado del switch -Lock wire "Motor" side. -cable de Cierre, lado MotorCut both Lock andUnlock wires in car- Unlock wire "Switch" side. -cable de Apertura, lado del switchLock Lock- Ground- Unlock wire "Motor" side. -cable de Apertura, lado MotorGreenBlueFuse308787a308787aGreenBlueLock Relay Unlock RelayFuse308787a308787aGreenBlueLock Relay Unlock Relay(+)12 Volts

Navigation menu